LPT-1M1-Y

|DrawingNo.|Rev.|Page|
|---|---|---|
|LPT-1M1-W18|D|1/5|



## SPECIFICATIONS 

|[1.GeneralSpecifications]|[1.GeneralSpecifications]|[1.GeneralSpecifications]|[1.GeneralSpecifications]|||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|Product Name<br>~~a~~||||WarningLight||||||||
|Model<br>~~es~~||||LPT-1M1-□ (□：R,Y,G,B)<br>~~es~~||||LPT-2M1-□ (□：R,Y,G,B)<br>~~es~~||||
|Rated Voltage<br>~~a~~||||12 - 24V DC||||||||
|OperatingVoltage Range<br>~~aes~~||||9.5 - 30V DC<br>~~esss~~<br>~~GO~~||||||||
|Rated Current<br>Consumption<br><br>~~es~~<br>~~a~~||Luminous Color<br>~~es~~||Red(R)<br>~~es~~|Amber(Y) <br>~~ss~~|Green(G)<br>~~ss~~|Blue(B)<br>~~GO~~|Red(R)<br>~~GO~~|Amber(Y)|Green(G)|Blue(B)|
|||Max.<br>~~es~~<br>~~a~~<br>~~es~~<br>~~a~~|12V DC<br>~~es~~<br>~~a~~<br>~~a~~|0.30A<br>~~es ss~~<br>~~es~~||0.60A<br>~~ss~~|0.50A<br>~~GO~~|1.10A<br>~~GO~~<br>~~ee~~||1.30A<br>~~ee~~|1.20A<br>~~ee~~|
||||24V DC<br>~~a~~<br>~~a~~<br>~~es~~<br>|0.15A<br>~~es~~<br>~~GG~~<br>||0.30A<br>~~GG~~<br>|0.25A<br>~~GG~~<br>|0.55A<br>~~ee~~<br>||0.65A<br>~~ee~~<br>|0.60A<br>~~ee~~<br>|
|Rated Power<br>~~es~~<br>~~a~~|||Max.<br>~~a~~<br>~~es~~<br>|3.6W<br>~~es~~<br>~~GG~~<br>||7.2W<br>~~GG~~<br>|6.0W<br>~~GG~~<br>|13.2W<br>||15.6W<br>|14.4W<br>|
|OperatingAmbient Temperature<br>~~a~~<br>~~es~~<br>~~es~~<br>~~a ~~||||-30℃ ～+75℃<br>~~es~~<br>~~GG~~<br> ~~G~~||||||||
|Storage Ambient Temperature<br>~~a~~||||-30℃ ～+75℃||||||||
|MountingLocation<br>~~a~~||||Indoor / Outdoor *1||||||||
|MountingDirection<br>~~a ~~||||All Directions<br>||||||||
|Protection Rating<br>Environmental Condition<br> <br>~~es~~||||IP68(IEC 60529) (IPX8: 1 m underwater for 1 hour)/ NEMA TYPE 4X,13<br> ~~Ce~~||||||||
||Environmental Condition<br> <br>~~es~~|||All Directions(excludingend of the cable)<br> ~~Ce~~||||||||
|Vibration Resistance<br> <br>~~es~~<br>~~a ~~||||90m/s²<br> ~~Ce~~<br> ~~G~~<br>~~ceen~~||||||||
|Luminous<br>Intensity *2<br>Luminous Color<br>~~ee~~||Luminous Color<br>~~ee~~||Red(R)<br>~~ee~~<br>~~ce~~|Amber(Y)<br>~~ee~~<br>~~en~~|Green(G)<br>~~ee~~|Blue(B)<br>~~ee~~|Red(R) <br>~~ee~~|Amber(Y) <br>~~ee~~|Green(G)<br>~~ee~~|Blue(B)<br>~~ee~~|
|||||500cd<br>or more<br>~~ee~~<br>~~ce~~|550cd<br>or more<br>~~ee~~<br>~~en~~|850cd<br>or more<br>~~ee~~|300cd<br>or more<br>~~ee~~|1,650cd<br>or more<br>~~ee~~|1,800cd<br>or more<br>~~ee~~|2,800cd<br>or more<br>~~ee~~|1,000cd<br>or more<br>~~ee~~|
|Flash pattern (4 types) *3||||Triple flash, Extreme Warning flash, Continuous, or Blinking<br>(for details,refer to “4.1. Flashpattern”. Factorydefault status: Triple flash)<br>~~ce en~~||||||||
|FlashingRate(Typ.)<br>~~a ~~||||Triple / Extreme warning:  400 flashesper minute    Blinking: 67 flashesper minute<br> ~~Q~~||||||||
|Dimmer Function<br>~~Ge~~<br>~~es~~||||Yes<br>~~Ge~~||||||||
|Daisy-<br>Chained<br>~~Pf~~||Number of units<br>~~es~~||Maximum 20 units(The LPT-1M1-□and LPT-2M1-□can be used together.)||||||||
|||Synchronize Wire<br>between each unit<br>(Maximum)<br>~~es~~||3m  *4||||||||
|||Flash group<br>~~es~~||Group A / Group B<br>(for details,refer to “4.2. Flashgroup”. Factorydefault status: GroupA)||||||||
|||Multiple-unit operation<br>~~es~~<br>~~Pf fo~~||Synchronized / Alternating<br>~~fo~~||||||||
|Setting<br>~~Pf~~<br>~~a~~||Items<br>~~es~~<br>~~Pf fo~~||Flashpattern,Flashgroup<br>~~fo~~||||||||
|||Method<br>~~Pf fo~~<br>~~a~~||When changing from factory settings, specify the flash settings before wiring the<br>equipment. Also, while in operation, do not change flash patterns or flash group<br>settings.<br>Each flash setting can be switched by applying voltage to the lead wire.<br>(for details, refer to “Instruction manual”.)<br>~~fo~~<br>~~G~~||||||||
|Mass<br>~~Pf fo~~<br>~~a~~||||settings.<br>72gor less<br>~~fo~~<br>~~G~~||||130gor less<br>~~fo~~||||
|Outer Dimensions<br>~~a~~<br>~~Ge~~||||Refer to the Outer Dimension Drawing<br>~~G~~<br>~~Ge~~||||||||
|Remarks||||*2 Due to the characteristics of the LED elements, there may be a slight variation in<br>color tone and brightness between units.<br>*4<br>*3 Flash Pattern (Triple flash / Blinking) meets SAE J595 Class 3.<br>If the product interval is 3m or more, up to 4 synchronize wire can be extended<br>to 20m each.<br>*1 Install on a flat, sturdy surface. Be sure that the product is securely mounted<br>when used where vibration is present.||||||||



Drawing No. Rev. Page LPT-1M1-W18 D 2/5 ~~a~~ 

||Drawing No.awing No.wing No.g No.No.o..<br>Rev.ev.v.<br>Pageage<br>LPT-1M1-W18W1818<br>D<br>2/5<br>~~a~~|
|---|---|
|Conformity Standards|EMC Directive (EN61000-6-4,EN61000-6-2) *5<br>KC（KN61000-6-4,KN61000-6-2）<br>FCC Part15 SubpartB Class A<br>RoHS Directive(EN IEC 63000)|
|Remarks|*5 EMC meets level ECE R10.05.<br>・Conforms to the CE Requirements<br>・Conforms to the UKCA Requirements<br>・If the equipment used with this product requires power insulation, use an insulated<br>・If you use this product in an environment where a momentary power failure occurs,<br>the flash may go out in time with the momentary power failure.Use this product in an<br>environment where momentary power failure does not occur.|



## [2. Model Number Configuration] 

**==> picture [214 x 56] intentionally omitted <==**

**----- Start of picture text -----**<br>
LPT- M1-<br>Luminous Color<br>R : Red<br>Size Y : Amber<br>1 : 86.0×28.0mm G : Green<br>2 : 114.4×43.4mm B : Blue<br>**----- End of picture text -----**<br>


- [3. Wiring Diagram] 

- 3.1. When using 1unit 

**==> picture [454 x 83] intentionally omitted <==**

**----- Start of picture text -----**<br>
Power switch<br>Power Supply Input wire + (red)<br>Fuse *1<br>Synchronize / Setting wire (blue)<br>Insulation ＋<br>Dimming Input / Dimming Switch Power Supply<br>Change Setting wire (gray) 12-24V DC －<br>Ground wire – (black)<br>This product<br>**----- End of picture text -----**<br>


- 3.2. When using multiple units (2 or more,5 or less) in a synchronous operation 

**==> picture [454 x 188] intentionally omitted <==**

**----- Start of picture text -----**<br>
Power switch<br>Power Supply Input wire + (red)<br>3m  *4 Fuse *1 Fuse *2<br>Synchronize / Setting wire (blue)<br>＋<br>Dimming Input / Dimming Switch Power Supply<br>Change Setting wire (gray) 12-24V DC －<br>This product (Unit1) Ground wire – (black)<br>Power Supply Input wire + (red)<br>Fuse *1<br>Synchronize / Setting wire (blue)<br>Dimming Input /<br>Change Setting wire (gray)<br>This product (Unit5) Ground wire – (black)<br>**----- End of picture text -----**<br>


- 3.3. When using multiple units (6 or more,20 or less) in a synchronous operation ・Distribute the power system into multiple system. ・You can connect up to 5 units per system. For 20 units, 4 systems are required. 

*1*2 : Wiring protection (Normal Blow).Please use if necessary. Remarks *1 LPT-1M1-□：1.0A *2 Consider the total current LPT-2M1-□：2.0A consumption of the equipment in use. ~~ss~~ 

|Drawing No.|Rev.|Page|
|---|---|---|
|LPT-1M1-W18|D|3/5|



## [4. Flash Specifications] 

**==> picture [485 x 697] intentionally omitted <==**

**----- Start of picture text -----**<br>
4.1. Flash pattern<br>1cycle<br>Light on<br>Triple flash<br>[SAE]<br>Dim.<br>*1 *2<br>Light off<br>er<br>1cycle<br>Light on<br>Extreme<br>Warning<br>flash Dim.<br>Light off<br>Light on<br>Continuous<br>Dim.<br>Light off<br>EI<br>1cycle<br>Light on<br>Blinking<br>[SAE]<br>*2 Dim.<br>Light off<br>n=<br>4.2. Flash group *3<br>Flash Flash<br>Group A<br>*1<br>1 cycle<br>Flash Flash<br>Group B<br>half cycle 1 cycle<br>_——<br>*1: Factory default status<br>Remarks *2: Meets level SAE J595 Class3.<br>*3:Exluding Continuous.<br>pop<br>**----- End of picture text -----**<br>


**==> picture [60 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
LPT-1M1-W18<br>**----- End of picture text -----**<br>


**==> picture [20 x 18] intentionally omitted <==**

**----- Start of picture text -----**<br>
4/5<br>**----- End of picture text -----**<br>


**==> picture [455 x 45] intentionally omitted <==**

**----- Start of picture text -----**<br>
LPT-1M1-W18 5/5<br>sina peo fonfosfos] | #88 [kL<br>**----- End of picture text -----**<br>