LPT-1M1-B

||Drawing No.|Rev.|Page|
|---|---|---|---|
||LPT-1M1-W18|A|1 / 5|



## SPECIFICATIONS 

## [1. General Specifications] 

|[1. General Specifications]|[1. General Specifications]|[1. General Specifications]|[1. General Specifications]|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|Product Name||||WarningLight||||||||||
|Model||||LPT-1M1-□ (□：R,Y,G,B)|||||LPT-2M1-□ (□：R,Y,G,B)|||||
|Rated Voltage||||12 - 24V DC||||||||||
|OperatingVoltage Range||||9.5 - 30V DC||||||||||
|Rated Current<br>Consumption||Luminous Color||Red(R)|Amber(Y)||Green(G)|Blue(B)|Red(R)|Amber(Y)||Green(G)|Blue(B)|
|||Max.|12V DC|0.30A|||0.60A|0.50A|1.10A|||1.30A|1.20A|
||||24V DC|0.15A|||0.30A|0.25A|0.55A|||0.65A|0.60A|
|Rated Power|||Max.|3.6W|||7.2W|6.0W|13.2W|||15.6W|14.4W|
|OperatingAmbient Temperature||||-30℃ ～+75℃||||||||||
|Storage Ambient Temperature||||-30℃ ～+75℃||||||||||
||MountingLocation|||Indoor / Outdoor *1||||||||||
||MountingDirection|||All Directions||||||||||
||Protection Rating|||IP68(IEC 60529) (IPX8: 1 m underwater for 1 hour)||||||||||
|||||NEMA TYPE 4X,13||||||||||
||Environmental Condition|||All Directions(excludingend of the cable)||||||||||
||Vibration Resistance|||90m/s²||||||||||
|Luminous<br>Intensity *2||Luminous Color||Red(R)||Amber(Y)|Green(G)|Blue(B)|Red(R)||Amber(Y)|Green(G)|Blue(B)|
|||||500cd<br>or more||550cd<br>or more|850cd<br>or more|300cd<br>or more|1,650cd<br>or more||1,800cd<br>or more|2,800cd<br>or more|1,000cd<br>or more|
|Flash pattern (4 types) *3||||Triple flash, Extreme Warning flash, Continuous, or Blinking<br>(for details,refer to “4.1. Flashpattern”. Factorydefault status: Triple flash)||||||||||
|FlashingRate(Typ.)||||Triple / Extreme warning:  400 flashesper minute    Blinking: 67 flashesper minute||||||||||
|Dimmer Function||||Yes||||||||||
|Daisy-<br>Chained||Number of units||Maximum 20 units(The LPT-1M1-□and LPT-2M1-□can be used together.)||||||||||
|||Distance between units||Maximum 3 m||||||||||
|||Flash group||Group A / Group B<br>(for details,refer to “4.2. Flashgroup”. Factorydefault status: GroupA)||||||||||
|||Multiple-unit operation||Synchronized / Alternating||||||||||
|Setting||Items||Flashpattern,Flashgroup||||||||||
|||Method||When changing from factory settings, specify the flash settings before wiring the<br>equipment. Also, while in operation, do not change flash patterns or flash group<br>settings.<br>Each flash setting can be switched by applying voltage to the lead wire.<br>(for details, refer to “Instruction manual”.)||||||||||
|||Mass||72gor less<br>|||||130gor less|||||
|Outer||Dimensions||Refer to the Outer Dimension Drawing||||||||||
|Remarks||||*1 Install on a flat, sturdy surface. Be sure that the product is securely mounted<br>when used where vibration is present.<br>*2 Due to the characteristics of the LED elements, there may be a slight variation in<br>color tone and brightness between units.<br>*3 Flash Pattern (Triple flash / Blinking) meets SAE J595 Class 3.||||||||||



Drawing No. Rev. Page LPT-1M1-W18 A 2 / 5 

|Conformity Standards|EMC Directive(EN61000-6-4,EN61000-6-2)*4|
|---|---|
||KC（KN61000-6-4,KN61000-6-2）|
||FCC Part15 SubpartB Class A|
||RoHS Directive(EN 50581)|
||Photobiological safetyof lamps and lampsystems(IEC 62471)|
|Remarks|*4 EMC meets level ECE R10.05.<br>・If the equipment used with this product requires power insulation, use an insulated<br>power supply.|



## [2. Model Number Configuration] 

LPTM1Luminous Color R : Red Size Y : Amber 1 : 86.0×28.0mm G : Green 2 : 114.4×43.4mm B : Blue 

## [3. Wiring Diagram] 

3.1. When using 1unit 

- 3.2. When using multiple units (2 or more,5 or less) in a synchronous operation 

- 3.3. When using multiple units (6 or more,20 or less) in a synchronous operation ・Distribute the power system into multiple system. 

   - ・You can connect up to 5 units per system. For 20 units, 4 systems are required. 

||*1*2 : Wiring protection (Normal Blow).Please use if necessary.|*1*2 : Wiring protection (Normal Blow).Please use if necessary.|*1*2 : Wiring protection (Normal Blow).Please use if necessary.|
|---|---|---|---|
|Remarks||*1<br>LPT-1M1-□：1.0A<br>LPT-2M1-□：2.0A<br>*2|Consider the total current<br>consumption of the equipment in use.|



|Drawing No.|Rev.|Page|
|---|---|---|
|LPT-1M1-W18|A|3 / 5|



## [4. Flash Specifications] 

**==> picture [496 x 677] intentionally omitted <==**

**----- Start of picture text -----**<br>
4.1. Flash pattern<br>1cycle<br>Light on<br>Triple flash<br>[SAE]<br>Dim.<br>*1 *2<br>Light off<br>1cycle<br>Light on<br>Extreme<br>Warning<br>Dim.<br>flash<br>Light off<br>Light on<br>Continuous<br>Dim.<br>Light off<br>1cycle<br>Light on<br>Blinking<br>[SAE]<br>Dim.<br>*2<br>Light off<br>4.2. Flash group *3<br>Flash Flash<br>Group A<br>*1<br>1 cycle<br>Flash Flash<br>Group B<br>half cycle 1 cycle<br>*1: Factory default status<br>Remarks *2: Meets level SAE J595 Class3.<br>*3:Exluding Continuous.<br>**----- End of picture text -----**<br>


**==> picture [69 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
LPT-1M1-W18<br>**----- End of picture text -----**<br>


**==> picture [33 x 13] intentionally omitted <==**

**----- Start of picture text -----**<br>
4 / 5<br>**----- End of picture text -----**<br>


LPT-1M1-W18 

**==> picture [34 x 18] intentionally omitted <==**

**----- Start of picture text -----**<br>
5 / 5<br>**----- End of picture text -----**<br>