Image not available
Illustrative purposes only
LPS3010-332MLB
Power Inductor (SMD), 3.3 µH, 1.1 A, Shielded, 830 mA, LPS3010 Series
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: COILCRAFT
- Product type: SMD Power Inductors
- Inductance:3.3µH; RMS Current (Irms):1.1A; Inductor Construction:Shielded; Saturation Current (Isat):830mA; Product Range:-; Power Inductor Case:2.95mm x 2.95mm x 0.9mm; DC Resist
- Inductance: 3.3µH
- Product Range: LPS3010 Series
- Product Width: 2.95mm
- Product Height: 0.9mm
- Product Length: 2.95mm
- DC Resistance Max: 0.22ohm
- RMS Current (Irms): 1.1A
- Power Inductor Case: 2.95mm x 2.95mm x 0.9mm
- Inductance Tolerance: ± 20%
- Inductor Construction: Shielded
- Saturation Current (Isat): 830mA
| Delivery and price | |
|---|---|
| Units per pack | 250 |
| Price | 0.613 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
Document 428-1
## **– Shielded Power Inductors LPS3010**
- Ultra small 3.0 × 3.0 mm footprint; less than 1.0 mm tall
- Very low DCR; excellent current handling
## **Core material** Ferrite
**Core and winding loss** See www.coilcraft.com/coreloss **Terminations** RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost.
**Weight** 25 – 32 mg
**Ambient temperature** –40°C to +85°C with I rms current, +85°C to +125°C with derated current
**Storage temperature** Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C
**Resistance to soldering heat** Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles **Moisture Sensitivity Level (MSL)** 1 (unlimited floor life at <30°C / 85% relative humidity)
**Failures in Time (FIT) / Mean Time Between Failures (MTBF)** 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 **Packaging** 1000/7″ reel; 3500/13″ reel; Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.4 mm pocket depth **Recommended pick and place nozzle** OD: 3 mm; ID: ≤ 1.5 mm **PCB washing** Only pure water or alcohol recommended
|||**DCR**|**SRF**|**Isat(A)**5|**Isat(A)**5|**Irms(A)**6|**Irms(A)**6|**Irms(A)**6|
|---|---|---|---|---|---|---|---|---|
|**Inductance**2 **max**3|||**typ**4|**10% 20%**|**10% 20%**|**30%**|**20°C 40°C**|**20°C 40°C**|
|**Part number**1**±20%**|**±20%(µH) **|**(Ohms) **|**(MHz) dro**|**drop dro**|**drop drop**||**rise**|**rise**|
|LPS3010-471ML_<br>LPS3010-681ML_<br>LPS3010-102ML_|LPS3010-471ML_<br>0.47<br>LPS3010-681ML_<br>0.68<br>LPS3010-102ML_<br>1.0|0.070<br>0.080<br>0.085|370<br>270<br>230|1.8<br>1.6<br>1.5|1.9<br>1.7<br>1.6|2.0<br>1.7<br>1.6|1.3<br>1.3<br>1.1|1.80<br>1.75<br>1.50|
|LPS3010-152ML_|LPS3010-152ML_<br>1.5|0.120|165|1.3|1.4|1.4|1.05|1.40|
|LPS3010-182ML_<br>LPS3010-222ML_|LPS3010-182ML_<br>1.8<br>LPS3010-222ML_<br>2.2|0.150<br>0.220|150<br>130|1.2<br>1.3|1.2<br>1.4|1.3<br>1.4|1.00<br>0.90|1.40<br>1.10|
|LPS3010-332ML_|LPS3010-332ML_<br>3.3|0.220|110|0.83|0.88|0.90|0.85|1.10|
|LPS3010-472ML_|LPS3010-472ML_<br>4.7|0.300|92|0.72|0.75|0.77|0.70|0.95|
|LPS3010-562ML_<br>LPS3010-682ML_|LPS3010-562ML_<br>5.6<br>LPS3010-682ML_<br>6.8|0.400<br>0.450|80<br>70|0.67<br>0.61|0.69<br>0.63|0.71<br>0.64|0.60<br>0.56|0.78<br>0.74|
|LPS3010-822ML_|LPS3010-822ML_<br>8.2|0.520|62|0.56|0.59|0.59|0.53|0.70|
|LPS3010-103ML_<br>LPS3010-123ML_<br>LPS3010-153ML_<br>LPS3010-183ML_|LPS3010-103ML_<br>10<br>LPS3010-123ML_<br>12<br>LPS3010-153ML_<br>15<br>LPS3010-183ML_<br>18|0.540<br>0.700<br>0.950<br>1.10|58<br>47<br>43<br>40|0.50<br>0.46<br>0.41<br>0.38|0.53<br>0.49<br>0.43<br>0.40|0.55<br>0.50<br>0.44<br>0.41|0.48<br>0.44<br>0.37<br>0.33|0.64<br>0.58<br>0.48<br>0.47|
|LPS3010-223ML_|LPS3010-223ML_<br>22|1.20|36|0.32|0.35|0.36|0.30|0.41|
|LPS3010-333ML_<br>LPS3010-473ML_<br>LPS3010-683ML_<br>LPS3010-104ML_|LPS3010-333ML_<br>33<br>LPS3010-473ML_<br>47<br>LPS3010-683ML_<br>68<br>LPS3010-104ML_<br>100|2.00<br>3.20<br>3.50<br>5.25|27<br>21<br>21<br>14|0.25<br>0.23<br>0.20<br>0.14|0.27<br>0.24<br>0.21<br>0.16|0.28<br>0.25<br>0.22<br>0.17|0.26<br>0.22<br>0.20<br>0.18|0.35<br>0.31<br>0.28<br>0.24|
|LPS3010-124ML_|LPS3010-124ML_<br>120|6.10|12|0.13|0.15|0.15|0.14|0.19|
|LPS3010-154ML_<br>LPS3010-184ML_<br>LPS3010-224ML_<br>LPS3010-334ML_|LPS3010-154ML_<br>150<br>LPS3010-184ML_<br>180<br>LPS3010-224ML_<br>220<br>LPS3010-334ML_<br>330|9.15<br>10.1<br>12.5<br>18.5|11<br>9<br>8<br>7|0.13<br>0.11<br>0.10<br>0.10|0.14<br>0.12<br>0.11<br>0.105 0.115 0.085 0.11|0.14<br>0.13<br>0.12<br>0.105 0.115 0.085 0.11|0.13<br>0.11<br>0.095 0.13<br>0.105 0.115 0.085 0.11|0.17<br>0.15<br>0.095 0.13<br>0.105 0.115 0.085 0.11|
## 1. Please specify **termination** and **packaging** codes:
**LPS3010-223MLC**
- **Termination: L** = RoHS compliant silver-palladiumplatinum-glass frit. Special order:
- **T** = RoHS tin-silver-copper (95.5/4/0.5) or **S** = non-RoHS tinlead (63/37).
- **Packaging: C** = 7″ machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel).
- **B** = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead.
- **D** = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (3500 parts per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A. Inductance at 1 MHz is the same for parts with SRF ≥10 MHz.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using an Agilent/HP 8753ES or equivalent.
5. DC current that causes the specified inductance drop from its value without current.
6. Current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Coilcraft **Designer’s Kit C392** contains samples of 0.80 µH to 33 µH parts (3 each) from LPS3008, LPS3010 and LPS3015. **Kit C401** contains samples of 0.56 µH to 33 µH parts (3 each) from LPS4012 and LPS4018. **Kit C402** contains samples of 220 µH to 3300 µH parts (3 each) from all five series. For details of kit contents and to order, contact Coilcraft or visit **http://order.coilcraft.com** .
Document 428-1 Revised 11/22/11
Document 428-2
**==> picture [50 x 114] intentionally omitted <==**
## **Shielded SMT Power Inductors – LPS3010 Series**
## **L vs Current**
## **L vs Frequency**
**==> picture [244 x 175] intentionally omitted <==**
**----- Start of picture text -----**<br>
1000<br>330 µH<br>100 68 µH<br>33 µH<br>10 6.8 µH<br>3.3 µH<br>1 0.68 µH<br>0.1<br>0.01 0.1 1 10<br>Frequency (MHz)<br>Inductance (µH)<br>**----- End of picture text -----**<br>
**==> picture [244 x 175] intentionally omitted <==**
**----- Start of picture text -----**<br>
1000<br>330 µH<br>100 68 µH<br>33 µH<br>10 6.8 µH<br>3.3 µH<br>1 0.68 µH<br>0.1<br>0.01 0.1 1 10<br>Current (A)<br>Inductance (µH)<br>**----- End of picture text -----**<br>
**==> picture [504 x 276] intentionally omitted <==**
**----- Start of picture text -----**<br>
0.116 ±0.003*<br>Typical Current Derating 2,95 ±0,076<br>120<br>110<br>100 0.116 ±0.003* Winding<br>2,95 ±0,076 direction<br>90 123X<br>80<br>70<br>Dash Internal<br>60 number code<br>50 Recommended<br>40 0.035 ±0.004** Land Pattern<br>30 0,9 ±0,1 0.020<br>0,51 0.045<br>20 1,14<br>Isat<br>10<br>Irms<br>0<br>-40 -20 0 20 40 60 80 100 120 140<br>0.025 0.130<br>Ambient temperature (°C) 0,64 3,30<br>0.035 0.040<br>0,89 1,02<br>* Dimensions are of the case not 0.130<br>including the termination. For maximum 3,30<br>overall dimensions including the<br>termination, add 0.005 in / 0,13 mm.<br>Percent of rated Current<br>25°C<br>**----- End of picture text -----**<br>
## **Typical Current Derating**
- **For optional tin-lead and tin-silver-copper terminations, dimensions are for the mounted part. Dimensions before mounting can be an additional 0.005 inch (0,13 mm).
**==> picture [83 x 14] intentionally omitted <==**
**----- Start of picture text -----**<br>
Dimensions are in [inches ]<br>mm<br>**----- End of picture text -----**<br>
**==> picture [118 x 44] intentionally omitted <==**
**==> picture [187 x 46] intentionally omitted <==**
Document 428-2 Revised 11/22/11
**==> picture [82 x 33] intentionally omitted <==**
Updated at March 10, 2026
Coilcraft is a globally recognized leader in the design and manufacture of high-performance magnetic components. Renowned for its engineering excellence, reliable delivery, and stringent quality standards, the company provides essential solutions for a wide array of demanding applications, including signal processing, RF, power management, and timing circuits. Our comprehensive portfolio of Coilcraft components is centered on their industry-leading inductor technologies. This encompasses a vast selection of high-efficiency power inductors designed to optimize modern power supply architectures, alongside precision RF inductors engineered to deliver exceptional stability and performance in high-frequency communications and wireless applications. To support complete electromagnetic compatibility and comprehensive circuit design, we also offer a variety of Coilcraft's specialized magnetic solutions. This includes robust common mode chokes and filters for effective EMC and RFI suppression, current sensing transformers, and a selection of inductor kits and assortments that provide design engineers with versatile options for rapid prototyping and development.
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →