LPS205-M

## **ARTESYN LPS200-M SERIES** 250 Watts 

Advanced Energy’s Artesyn LPS200-M series medicallyapproved AC-DC power supplies are available with a nominal main output of 5 V, 12 V, 15 V, 24 V or 48V. Auxiliary 12 V fan output is also provided. LPS200-M power supplies provide 125 Watts of output power with free air convection cooling or up to 250 Watts with 30 CFM of forced air. All models have a power factor of 0.99 typical and a 3 x 5 x 1.32 inch form factor. 

**AT A GLANCE** 

## **Total Power** 

**125 to 250 Watts** 

## **Input Voltage** 

**90 to 264 VAC** 

## **# of Outputs** 

**Single** 

## **SPECIAL FEATURES** 

## **SAFETY** 

>  Medical and ITE safeties  TUV 62368, 60601-1 

>  Active power factor correction  UL 62368, 60601-1 

>  3” x 5” footprint  cULus 62368, 60601-1 

>  Less than 1U high  CB Certificate & report 

>  EN61000-3-2 compliant  CE Mark (LVD) 

>  Remote sense  UKCA Mark 

- Power fail 

- Adjustable main output 

- Built-in Class B EMI filter 

- Overvoltage protection 

- Overload protection 

- Thermal overload protection 

- Isolated 12 V Fan output 

- LPX200 enclosure kit available 

- RoHS compliant 

©2022 Advanced Energy Industries, Inc. 

**LPS200-M** 

**==> picture [479 x 337] intentionally omitted <==**

**----- Start of picture text -----**<br>
ELECTRICAL SPECIFICATIONS<br>Input<br>Input ra nge 90 to 264 VAC; 120 to 300 VDC<br>Frequency 47 to 63 Hz<br>Inrush current 50 A max., cold start @ 25°C<br>Efficiency 86% typical at full load<br>EMI/RFI FCC Class B conducted; CISPR22 Class B conducted;<br>EN55022 Class B conducted; VDE0878PT3 Class B conducted<br>Power factor 0.99 typical<br>Safety ground Leakage current 275 µA @ 50/60 Hz, 264 Vac input<br>Output<br>Maximum power 125 W for convection (100 W for LPS202-M); 250 W (200 W for LPS202-M) with 30CFM forced<br>air<br>Adjustment range ± 10% minimum on the main outputs<br>Fan output 12 V @ 0.5 A convection, @ 1 A forced air isolated, ± 10%<br>Hold-up time 16 ms @ 250 W load, 120 Vac input<br>Overload protection Short circuit protection on all outputs. Case overload protected @ 110% to 160% above rating<br>Overvoltage protection 15% to 50% above nominal output<br>Logical Control<br>Power failure Open collector logic signal goes high 100 to 500 msec after main output; it goes low at least 6<br>msec before loss of regulation<br>Remote sense Compensates for 0.5 V lead drop min. Will operate without remote sense connected. Reverse<br>connection protected.<br>**----- End of picture text -----**<br>


## **ENVIRONMENTAL SPECIFICATIONS** 

**==> picture [479 x 83] intentionally omitted <==**

**----- Start of picture text -----**<br>
Operating temperature 0°C to 50°C ambient derate each output as 2.5% per degree from 50° to 70°C. -20°C start up<br>Storage temperature -40°C to +85°C<br>Electromagnetic susceptibility Designed to meet EN61000-4; -2, -3, -4, -5, -6, -8, -11 Level 3<br>Humidity Operating; non-condensing 10% to 95% RH<br>Vibration IEC68-2-6 to the levels of IEC721-3-2<br>MTBF calculated 1 million hours at full load and 25°C ambient conditions. 230 Vac input, Bellcore<br>**----- End of picture text -----**<br>


**2 advancedenergy.com** 

**LPS200-M** 

## **ORDERING INFORMATION** 

**==> picture [479 x 93] intentionally omitted <==**

**----- Start of picture text -----**<br>
NumberModel  VoltageOutput  Minimum Load Maximum Load with Convection Cooling Maximum Load with 30CFM Forced Air Peak Load1 Regulation2 P/P(PARD)Ripple  3<br>LPS202-M 5 V 0 A 20 A 40 A 44 A ± 2% 50 mV<br>LPS203-M 12 V 0 A 10.3 A 20.8 A 22 A ± 2% 120 mV<br>LPS204-M 15 V 0 A 8.3 A 16.6 A 18 A ± 2% 150 mV<br>LPS205-M 24 V 0 A 5.2 A 10.4 A 11.5 A ± 2% 240 mV<br>LPS208-M 48 V 0 A 2.6 A 5.2 A 5.8 A ± 2% 480 mV<br>**----- End of picture text -----**<br>


- 1 Peak current lasting <30 seconds with a maximum 10% duty cycle. 

- 2 At 25°C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 

- 3 Peak-to-peak with 20 mHz bandwidth and 10 µF (tantalum capacitor) in parallel with a 0.1 µF capacitor at rated line voltage and load ranges. 

4  This product is a Component Power Supply and is only for inclusion by professional installers within other equipment and must not be operated as a standalone product. EMC compliance to appropriate standards must be verified at the system level. This product is for sale to OEMs and System Integrators, including through Distribution Channels. It is not intended for sale to End Users. 

## **PIN ASSIGNMENTS** 

**==> picture [479 x 205] intentionally omitted <==**

**----- Start of picture text -----**<br>
Connector  LPS200-M<br>SK1 Pin 1 Neutral<br>Pin 3 LINE<br>SK2 TB-1 COMMON<br>TB-2 MAIN OUTPUT<br>SK3 Pin 1 +V1 REMOTE SENSE<br>Pin 2 -V1 REMOTE SENSE<br>Pin 3 N/C<br>Pin 4 N/C<br>Pin 5 +POWER FAIL<br>Pin 6 COMMON<br>Pin 7 N/C<br>Pin 8 COMMON<br>Pin 9 +12 V FAN<br>Pin 10 +12 FAN RETURN (ISOLATED)<br>**----- End of picture text -----**<br>


**advancedenergy.com       3** 

**LPS200-M** 

**==> picture [479 x 187] intentionally omitted <==**

**----- Start of picture text -----**<br>
MATING CONNECTORS<br>AC Input (SK1) Molex 09-50-8031 (connector)<br>PINS: 08-52-0072<br>AC Ground Molex 01-90020001<br>DC Output (SK2) Molex 19141-0058 or 19099-0044<br>Spade lug based on Cable Ampacity/AWG<br>Control Sense (SK3) Molex 90142-1110 (USA)<br>PINS: 90119-2110 or<br>Amp: 87977-3<br>PINS: 87309-8 or<br>Landwin: 2580S1003<br>PINS: 2583T021V<br>Artesyn Embedded Power Connector Kit #70-841-020, includes all of the above.<br>**----- End of picture text -----**<br>


- 1 Specifications subject to change without notice. 

2 All dimensions in inches (mm), tolerance is ± 0.02” (± 0.5 mm) 

3 Mounting holes MH1 and MH2 should be grounded for EMI purposes. 

4 Mounting hole MH1 is safety ground connection. 

5 Specifications are for convection rating at factory settings at 115 VAC input, 25°C unless otherwise stated. 

6 This power supply requires mounting on metal standoffs 0.20” (5m) in height. 

7 Warranty: 2 years 

8 Weight: 0.75 lb/0.34 kg 

**4 advancedenergy.com** 

**LPS200-M** 

## **MECHANICAL DRAWING** 

**==> picture [181 x 271] intentionally omitted <==**

**==> picture [163 x 50] intentionally omitted <==**

**==> picture [51 x 18] intentionally omitted <==**

**----- Start of picture text -----**<br>
(2.5) Max<br>Component<br>Lead Protrusion<br>**----- End of picture text -----**<br>


**advancedenergy.com       5** 

**==> picture [596 x 270] intentionally omitted <==**

## **ABOUT ADVANCED ENERGY** 

Advanced Energy (AE) has devoted more than three decades to perfecting power for its global customers. AE designs and manufactures highly engineered, precision power conversion, measurement and control solutions for mission-critical applications and processes. 

Our products enable customer innovation in complex applications for a wide range of industries including semiconductor equipment, industrial, manufacturing, telecommunications, data center computing, and medical. With deep applications know-how and responsive service and support across the globe, we build collaborative partnerships to meet rapid technological developments, propel growth for our customers, and innovate the future of power. 

For international contact information, visit advancedenergy.com. 

powersales@aei.com (Sales Support) productsupport.ep@aei.com (Technical Support) +1 888 412 7832 

Specifications are subject to change without notice. Not responsible for errors or omissions. ©2022 Advanced Energy Industries, Inc. All rights reserved. Advanced Energy®, AE® and Artesyn™ are U.S. trademarks of Advanced Energy Industries, Inc. 

ENG-LPS200-M-235-04.24.22