LPQ142-C

**POWER** CN **Data Sheet** 

**LPQ142 Series** 145 Watts 

**Total Power:** 110 - 145 Watts **Input Voltage:** 85 - 264 Vac 120 - 300 Vdc **# of Outputs:** Quad 

## SPECIAL FEATURES 

- Active power factor correction 

- IEC EN61000-3-2 compliance 

- Adjustable outputs on 1, 3 & 4 Remote sense on main output 

- Single wire current sharing 

- Power fail and remote inhibit 

- Built-in EMI filter 

- Low output ripple 

- Overvoltage protection 

- Overload protection 

- Thermal overload protection 

- Adjustable floating 4th output 

- RoHS compliant 

- Optional cover (-C suffix) 

- Optional fan cover (-CF suffix) 

## SAFETY 

- VDE 60950 UL 60950 CB Certificate and report CSA 60950 

- CE Mark (LVD) NEMKO  EN 60950/EMKO-TUE 

## **Electrical Specifications** 

|**Electrical Specificationspecificationsecifications**|**Electrical Specificationspecificationsecifications**|
|---|---|
|**Input**||
|Input ra nge|85 - 264 Vac; 120 - 300 Vdc|
|Frequency|47 - 67 Hz|
|Inrush current|38 A max, cold start @ 25 °C|
|Efficiency|75% typical at full load|
|EMI filter|Meets FCC Class B conducted<br>CISPR 22 Class B conducted<br>EN55022 Class B conducted<br>VDE 0878 PT3 Class B conducted|
|Power factor|0.99 typical|
|Safety ground<br>leakage current|1.0 mA @ 50/60 Hz, 264 Vac input|
|**Output**||
|Maximum power|80 W convection (60 W with cover -C)<br>145 W with 30 CFM forced air<br>(100 W with cover -C)|
|Adjustment range|3.3 - 5.5V on main; -12 - 15V on 3rd output<br>3.3 - 25 V on 4th output|
|Hold-uptime|20 ms @175 W load at nominal line|
|Overload protection|Short circuit protection on all outputs. Case overload protected @<br>110-145% above peak rating|
|Overvoltageprotection|Tracks outputs 1, 3 & 4; 10 to 35%|



|**Logic Control**|**Logic Control**|
|---|---|
|ACpower failure|TTL logic signalgoes high 100 - 500 msec after V1 output; Itgoes low at least 4 msec before loss of regulation|
|Remote inhibit|Requires contact closure to inhibit outputs|
|Remote sense|Compensates for 0.5 V lead dropmin. Will operate without remote sense connected. Reverse connectionproteced.|
|DC - OK|TTL logic signalgoes high after main output is in regulation. Itgoes low when there is a loss of regulation|



DC - OK TTL logic signal goes high after main output is in regulation. It goes low when there is a loss of regulation 

**Environmental Specifications** Operating temperature 0° to 50 °C ambient. Derate each output 2.5% per degree from 50° to 70 °C (except for -C version). Storage temperature -40 °C to +85 °C Temperature coefficient ±0.4% per °C Electromagnetic susceptibility Designed to meet IE61000-4, -2, -3, -4, -5, -6, -8, -11, Level 3 Humidity Operating; non-condensing 5% to 95% Vibration Three orthogonal axes, sweep at 1 oct/min, 5 min. dwell at four major resonances 0.75G peak 5Hz to 500Hz, operational ~~fp~~ MTBF demonstrated >550,000 hours at full load and 25°C ambient conditions **Ordering Information** Maximum Load Model Output Minimum Maximum Load with Ripple P/P with 30CFM Peak Load[1] Regulation[2] Number Voltage Load Convection Cooling (PARD)[3] Forced Air LPQ142 5 V (3.3 - 5.5 V) 0 A 12 A 25 A 27 A ±2% 50 mV 12 V 0 A 5 A 6 A 9 A ±3% 120 mV -12V (-12 -15 V) 0 A 1 A 1.5 A 2 A ±3% <1% ±3.3-25 V 0.5 A 1.5 A 4.5 A 5 A ±3% <50mV or 1% ~~————~~ 1. Peak current lasting <30 seconds with a maximum 10% duty cycle. 2. At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 

3. Peak-to-peak with 20 MHz bandwidth and 10 μF in parallel with a 0.1 μF capacitor at rated line voltage and load ranges. 

4. Fourth (4th) output adjustable 3.3 - 25 V factory set at 5 V. 

5. *Minimum loads are required when output set below 5 Volts 

6. Remote inhibit resets OVP latch 

7. This product is a Component Power Supply and is only for inclusion by professional installers within other equipment and must not be operated as a standalone product. EMC compliance to appropriate standards must be verified at the system level. This product is for sale to OEMs and System Integrators, including through Distribution Channels. It is not intended for sale to End Users. 

Note: -C suffix added to the model number indicates cover option. 

-CF suffix added to the model number indicates fan cover option. 

**Pin Assignments Pin Assignments Mating Connectors** SK1 PIN 1 Ground SK6 PIN 1 N/C (SK1) AC Input Molex 09-50-8051 (USA PIN 3 Neutral PIN 2 DC OK Molex 09-91-0500 (UK) PINS: 08-58-0111 PIN 5 Line PIN 3 N/C (SK2) Aux DC Molex 09-50-8061 (USA) SK2 PIN 1 +12 V PIN 4 V1 SWP Output Molex 09-91-0600 (UK) PIN 2 Common PIN 5 Common PINS: 08-58-0111 PIN 3 -12 V PIN 6 +V1 sense (SK6) Control Molex 90142-0010 (USA) PIN 4 Common PIN 7 Sense common Signals PINS: 90119-2110 or PIN 5 +5 V to +25 V (float) PIN 8 + inhibit Amp: 87977-3 PINS: 87309-8 PIN 6 Common (float) PIN 9 - inhibit (SK4) Main Output Molex BB-19141-0058 SK4 TB-1 Common PIN 10 Power fail TB-2 +5 V Artesyn Embedded Technologies connector kit ~~<=~~ #70-841-017, includes all of the above. 

## **Mechanical Drawing** 

**==> picture [315 x 384] intentionally omitted <==**

**----- Start of picture text -----**<br>
V1 Adj<br>i) SS 6 Se MAIN<br> OUTPUT<br>V4 Adj - Course<br>V4 Adj - Fine<br>V4-<br>SK2 COMMV4+<br>L -12V OUT<br>COMM<br>SK1 N +12V OUT<br>GND<br>SK6<br>< a c om =S om @ Se SS th : Li<br>V3 Output Adjust Pot<br>-CF option<br>#6-32 M3<br>(3X) 19.1<br>29.1<br>1.5<br>(38.1)<br>M3<br>(2X) 6.4<br>161.5<br>171.5 #6-32<br>i<br>4.00 (4X) 63.5<br>(101.6)<br>a ~ y<br>(2X) 119.6 M3 (8 places) #6-32 (8 places)<br>(2X) 139.7<br>7.0<br>(177.8)<br>6<br>1<br>5 10<br>1 6<br>**----- End of picture text -----**<br>


Notes: 

1. Specifications subject to change without notice. 

2. All dimensions in inches (mm), tolerance is ±0.02”. 

3. Specifications are for convection rating at factory settings unless otherwise stated. 

4. Mounting screw maximum insertion depth is 0.12”. 

5. Warranty: 2 year 

6. Weight: 1.63 lb/0.74 kg 

## **WORLDWIDE OFFICES** 

Americas Europe (UK) Asia (HK) 2900 S.Diablo Way Waterfront Business Park 14/F, Lu Plaza Tempe, AZ 85282 Merry Hill, Dudley 2 Wing Yip Street USA West Midlands, DY5 1LX Kwun Tong, Kowloon +1 888 412 7832 United Kingdom Hong Kong +44 (0) 1384 842 211 +852 2176 3333 

## **www.artesyn.com** 

Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. © 2016 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. 

For more information: www.artesyn.com/power For support: productsupport.ep@artesyn.com 

LPQ142 Series-DS 18Mar2016