LMBLC15T

## LC15T In-Line Touch Switch 

## Datasheet 

- In-line capacitive touch switch with M12 connectors 

- On/Off or PWM Control Models available 

**==> picture [126 x 35] intentionally omitted <==**

- Low profile, rugged, water-resistant design 

- Perfect for DC-powered devices 

- Rated for up to 30 V DC 

- Capability to dim lights using PWM output 

- • Optional snap clips, VHB, or velcro, for easy installation and repositioning 

- Models available with up to 4A maximum output current 

Important: Read the following instructions before operating the light. Please download the complete LC15T In-Line Touch Switch technical documentation, available in multiple languages, from www.bannerengineering.com for details on the proper use, applications, Warnings, and installation instructions of this device. 

Important: Lea el siguiente instructivo antes de operar el luminario. Por favor descargue desde www.bannerengineering.com toda la documentación técnica de los LC15T In-Line Touch Switch, disponibles en múltiples idiomas, para detalles del uso adecuado, aplicaciones, advertencias, y las instrucciones de instalación de estos dispositivos. 

Important: Lisez les instructions suivantes avant d'utiliser le luminaire. Veuillez télécharger la documentation technique complète des LC15T In-Line Touch Switch sur notre site www.bannerengineering.com pour les détails sur leur utilisation correcte, les applications, les notes de sécurité et les instructions de montage. 

## Models 

|Models|Model Function|Power Applied to LC15T|10%-90% PWM<br>Output*|LC15T Output On<br>100%|Used With|
|---|---|---|---|---|---|
|LC15T-127AL2RGQP|On/Off|Red|N/A|Green|2-wire DC Devices|
|LC15T-127AP1RBGQP|3-Wire PWM Control||Blue||3-Wire PWM Controlled Devices|
|LC15T-127AP2RBGQP|2-Wire PWM Control||Blue||2-wire PWM Controlled Devices|



*Intensity corresponds to PWM output. 

## Device Configuration 

**==> picture [500 x 246] intentionally omitted <==**

**----- Start of picture text -----**<br>
Device Interface Function Color Applicable Models<br>ON/OFF<br>A single touch in the off-state turns the device on. Red = Off All Models<br>Green = On<br>A single touch in the on-state turns the device off.<br>Single Touch<br>PWM Control<br>Touch and hold to increase the PWM Output from 0% Red = Off; 0% PWM Output 2-Wire PWM Models<br>to 100%.* Blue = On; 10-90% PWM Output 3-Wire PWM Models<br>Continue to touch and hold to decrease the PWM Green = On; 100% PWM Output (See Compatible Devices on p. 2)<br>Output from 100% to 0%.<br>Touch and Hold<br>X2<br>2-Wire PWM Models<br>100% ON Green = On; 100% PWM Output 3-Wire PWM Models<br>Double touch to return to 100% PWM Output.<br>(See Compatible Devices on p. 2)<br>Double Touch<br>**----- End of picture text -----**<br>


Original Document 217460 Rev. A 

13 October 2020 

217460 

LC15T In-Line Touch Switch 

*The device saves the last PWM state when turned off. When turned back on again with a single touch, it returns to the last saved state. 

## Compatible Devices 

## On/Off Devices 

The LC15T models with On/Off function are compatible with any type of DC device that requires constant power on the Brown (Pin 1) and Blue (Pin 3) wires. 

2-Wire PWM Lights 

The LC15T works with special models of the following 2-Wire PWM LED lights: 

- WLS15 Single Color LED Strip Light 

- WLH60 High Temperature LED Light 

## 3-Wire PWM Lights 

The LC15T works with special models of the following 3-Wire PWM LED lights. These models include PWM in the model key: 

- WLS27 LED Strip Light, P/N 189556 • WLA LED Area Light, P/N 179494 

- • WLS28-2 LED Strip Light, P/N 179493 • WLC90 Heavy Duty LED Light, P/N 179495 • HLS27 Hazardous Area LED Strip Light, P/N 197949 • WLC60 Heavy Duty LED Light, P/N 179496 • WLB92 DC LED Strip Light, P/N 183983 • WLB32 DC LED Strip Light, P/N 176313 

## Specifications 

|Specifcations||
|---|---|
|Supply Voltage|Construction|
|12 V DC to 30 V DC|Polycarbonate outer housing; polyamide end caps|
|See electrical characteristics on product label|Mounting|
|Supply Current|Integral mounting slots for M4 (#8) screws, tighten to 5 in·lbf max torque|
|11 mA typical at 24 V DC (exclusive of load)|Multiple bracket options available|
|22mA maximum (exclusive of load)|Connections|
|Maximum Pass-Through Current|Input: 150 mm (6 in) PVC cable with a 4-pin M12/Euro-style male quick disconnect|
|4 A|Output: 150 mm (6 in) PVC cable with a 4-pin M12/Euro-style female quick disconnect|
|Maximum PWM Output Current|PWM Frequency|
|3-wire models: 150 mA|500 Hz|
|2-wire models: 4 A<br>On/Off modes: 4 A|Dimming Range<br>0%-100% in 10% increments|
|Operating Temperature<br>–40 °C to +60 °C (–40 °F to +140 °F)|Certifcations|
|Storage Temperature:–40 °C to +70 °C (–40 °F to +158 °F)||
|Environmental Rating||
|IEC IP66, IEC IP67||
|Vibration and Mechanical Shock||
|Vibration: 10 Hz to 55 Hz, 1.0 mm peak-to-peak amplitude per IEC 60068-2-6||
|Shock: 15G 11 ms duration, half sine wave per IEC 60068-2-27||
|Impact: IK06 (IEC EN 60068-2-75)||



|Color|Dominant Wavelength (nm) or<br>Color Temperature (CCT)|Color Coordinates|Color Coordinates|Lumen Output (Typical at 25 °C)|
|---|---|---|---|---|
|||x|y||
|ed|620|0.689|0.309|1.3|
|Green|522|0.154|0.700|2.5|
|lue|466|0.140|0.054|0.9|



## Dimensions 

All measurements are listed in millimeters [inches], unless noted otherwise. 

P/N 217460 Rev. A 

www.bannerengineering.com - Tel: + 1 888 373 6767 

2 

LC15T In-Line Touch Switch 

## Wiring Diagrams 

|Male - Input<br>~~sn~~|Pin<br>~~sn~~|Wire Color<br>~~sn~~|Connection<br>~~sn~~|
|---|---|---|---|
|**1**<br>**4**<br>**3**<br>**2**<br>~~sn~~|1<br>~~sn~~|Brown<br>~~sn~~|12 V DC to 30 V DC<br>~~sn~~|
||3|Blue|DC common|
||4|Black|Not used|
||2|White|Not used|



|Female - Output|Pin|Wire Color|Connection|Connection|Connection|
|---|---|---|---|---|---|
||||On/Off (L2 Models)|2-Wire (P2 Models)|3-Wire (P1 Models)|
|**2**<br>**3**<br>**4**<br>**1**|1|Brown|12 V DC to 30 V DC|Pulse width modulation<br>(PWM) output|12 V DC to 30 V DC|
||3|Blue|DC common|DC common|DC common|
||4|Black|Not used|Not used|Pulse width modulation (PWM) output|
||2|Not Used|Not used|Not used|Not used|



## Accessories 

## Mounting Accessories 

All measurements are listed in millimeters [inches], unless noted otherwise. 

- LMBLC15T LMBLC15TMAG • Stainless steel clip bracket 25 27 • Magnetic mounting bracket for attachment to 25 27 • Includes 1 clip bracket and 2 plastic spacers steel and iron surfaces 23 • Clearance hole for M5 hardware LZ 16 Bo Ø36 

- Ø5.2 & © 

- LMBLC15TTD LMBLC15TTF • Includes 2 50 mm (2 in) strips of • Includes 1 50 mm (2 in) strip of 3M[™] Dual Lock[™] reclosable double-sided foam urethane fasteners strips 

- • Recommended for mounting to • Acrylic adhesive provides high metal and plastic surfaces bond strength to most surfaces 

- • Strong, pressure-sensitive • Bonds to low surface energy adhesive bonds on contact plastics such as polypropylene and powder coated paints 

## Power Supplies 

- PSW-24-1 PSD-24-4 • 24 V DC, 1 A Class 2 UL Listed power supply • 90 to 264 V AC 50/60 Hz input • 100 V AC to 240 V AC 50/60 Hz input • Includes a 1.8 m (6 ft) US style • 2 m (6.5 ft) PVC cable with M12/Euro-style quick 5-15P input plug 

   - 2 m (6.5 ft) PVC cable with M12/Euro-style quick disconnect 

   - 24 V DC UL Listed Class 2 M12/ Euro-style connector output 

- Includes Type A (US, Canada, Japan, Puerto Rico, Taiwan), Type C (Germany, France, South Korea, Netherlands, Poland, Spain, Turkey), Type G (United Kingdom, Ireland, Singapore, Vietnam), and Type I (China, Australia, New Zealand) AC detachable input plugs 

- 4 A total current 

P/N 217460 Rev. A 

www.bannerengineering.com - Tel: + 1 888 373 6767 

3 

LC15T In-Line Touch Switch 

## Cordsets 

|4-Pin Threaded M12/Euro-Style Cordsets—Double Ended|4-Pin Threaded M12/Euro-Style Cordsets—Double Ended|4-Pin Threaded M12/Euro-Style Cordsets—Double Ended|4-Pin Threaded M12/Euro-Style Cordsets—Double Ended|||
|---|---|---|---|---|---|
|Model|Length|Style|Dimension|s|Pinout|
|MQDEC-401SS|0.31 m (1 ft)|Male Straight/Female<br>Straight|40 Typ.<br>[1.58"]<br>ø 14.5 [0.57"]<br>M12 x 1<br>44 Typ.<br>[1.73"]<br>ø 14.5 [0.57"]<br>M12 x 1||Female<br>**2**<br>**3**<br>**4**<br>**1**<br>Male<br>**1**<br>**4**<br>**3**<br>**2**<br>1 = Brown<br>2 = White<br>3 = Blue<br>4 = Black|
|MQDEC-403SS|0.91 m (2.99 ft)|||||
|MQDEC-406SS|1.83 m (6 ft)|||||
|MQDEC-412SS|366 m (12 ft)|||||
|MQDEC-420SS|.<br>6.10 m (20 ft)|||||
|MQDEC-430SS|<br>9.14 m (30.2 ft)|||||
|MQDEC-450SS|15.2 m (49.9 ft)|||||



## Banner Engineering Corp. Limited Warranty 

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. 

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. 

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. 

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. 

For patent information, see www.bannerengineering.com/patents. 

## Mexican Importer 

Banner Engineering de Mèxico, S. de R.L. de C.V. David Alfaro Siqueiros 103 Piso 2 Valle oriente San Pedro Garza Garcia Nuevo Leòn, C. P. 66269 81 8363.2714 

## FCC Part 15 and CAN ICES-3 (B)/NMB-3(B) 

This device complies with part 15 of the FCC Rules and CAN ICES-3 (B)/NMB-3(B). Operation is subject to the following two conditions: 

1. This device may not cause harmful interference, and 

2. This device must accept any interference received, including interference that may cause undesired operation. 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules and CAN ICES-3 (B)/NMB-3(B). These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 

- Reorient or relocate the receiving antenna. 

- Increase the separation between the equipment and receiver. 

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

- • Consult the manufacturer. 

© Banner Engineering Corp. All rights reserved