LGL2W391MELC30

**ALUMINUM  ELECTROLYTIC  CAPACITORS** 

## **LGL** 

Snap-in Terminal Type, 105°C Ultra-Smaller-Sized 

**==> picture [32 x 65] intentionally omitted <==**

**----- Start of picture text -----**<br>
LGG<br>Smaller<br>LGL<br>Smaller<br>**----- End of picture text -----**<br>


One rank smaller case sized than LGG. Suited for equipment down sizing. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). 

## **LGM** 

**==> picture [511 x 225] intentionally omitted <==**

**----- Start of picture text -----**<br>
Specifications<br>Item Performance Characteristics<br>a Category Temperature Range – 25 to +105°C<br>Rated Voltage Range 400 450V<br>Rated Capacitance Range 120 to 1000µF<br>eS Capacitance Tolerance ± 20% at 120Hz,  20°C<br>Leakage Current I            (µA) (After 5 minutes' application of rated voltage at 20°C)  [C : Rated Capacitance (µF)  V : Voltage (V)]3 CV<br>ee<br>Rated voltage (V) 400 450 Measurement frequency : 120Hz at 20°C<br>Tangent of loss angle (tan δ) tan  δ (max.) 0.15 0.20<br>PE ee<br>Rated voltage (V) 400  450 Measurement frequency : 120Hz<br>Stability at Low Temperature Impedance ratio Z(– 25°C) / Z(+20°C) 8 Temperature : 20°C<br> (max.)<br>a (er ee ee<br>The specifications listed at right shall be met when the  Capacitance change Within ± 20% of the initial capacitance value<br>Endurance rated ripple current is applied for 2000 hours at 105capacitors are restored to 20°C after D.C. bias plus °C,  tan δ 200% or less than the initial specified value<br>the peak voltage shall not exceed the rated voltage.  Leakage current Less than or equal to the initial specified value<br>|<br>After storing the capacitors under no load at 105°C for 1000 Capacitance change Within ± 20% of the initial capacitance value<br>Shelf Life hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, tan δ 200% or less than the initial specified value<br>they shall meet the characteristic requirements listed at right. Leakage current Less than or equal to the initial specified value<br>i<br>Marking Printed with white color letter on black sleeve.<br>**----- End of picture text -----**<br>


## Drawing 

Type numbering system (Example : 400V 150µF) 

**==> picture [505 x 211] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 2 3 4 5 6 7 8 9 10 11 12 13 14<br>Polarity bar L G L LI 2 G iLL 1  T 5 1 | M E L LI Z LI) 2 5<br>Sleeve (PET)  Case length code<br>Case dia. code<br>Configuration φD Code<br>Capacitance tolerance (±20%)  22 Z<br>Rated capacitance (150µF)  25 A<br>30 B<br>Rated voltage (400V)<br>L± 2 4.0±0.5 LS Series name 35 C<br>Pressure relief vent<br>Type<br>0.8 [+0.2] -0.1<br>1.5 +0.2-0.1<br>@ 2×φ 2± 0.1 Id<br> (PC board hole dimensions)   (Terminal dimensions)<br>Other terminations available upon request.<br>Please refer to the Guidelines for Aluminum Electrolytic Capacitors.<br>10±0.1<br>0.8<br>+0.2-0.1<br>(10 )<br>φD+1.5max.<br>0.5<br>±<br>4.0 (2.5)<br>**----- End of picture text -----**<br>


Frequency coefficient of rated ripple current Frequency (Hz) 50 60 120 300 1 k 10k 50k or more Coeff. 400 · 450V 0.77 0.82 1.00 1.16 1.30 1.41 1.43 ~~——— ee~~ 

Dimension table in next page. ~~le~~ 

—— CAT.8100M 

**ALUMINUM  ELECTROLYTIC  CAPACITORS** 

## **LGL** 

## Dimensions 

||400V (2G)|400V (2G)|400V (2G)|400V (2G)|
|---|---|---|---|---|
|Cap.<br>(µF)|Size<br>φD×L(mm)|Rated ripple<br>(mArms)|Leakage Current<br>(mA)|Code|
|150|22×25|730|0.73|LGL2G151MELZ25|
|220|22 × 30|780|0.88|LGL2G221MELZ30|
||25×25|780|0.88|LGL2G221MELA25|
|270|22×35|910|0.98|LGL2G271MELZ35|
||25×30|910|0.98|LGL2G271MELA30|
|330|22 × 45|1070|1.08|LGL2G331MELZ45|
||25×35|1070|1.08|LGL2G331MELA35|
||30×25|1040|1.08|LGL2G331MELB25|
|390|22×50|1230|1.18|LGL2G391MELZ50|
||25×40|1230|1.18|LGL2G391MELA40|
||30×30|1230|1.18|LGL2G391MELB30|
||35×25|1180|1.18|LGL2G391MELC25|
|470|25×45|1500|1.30|LGL2G471MELA45|
||30×35|1500|1.30|LGL2G471MELB35|
|560|30×40|1660|1.41|LGL2G561MELB40|
||35×30|1660|1.41|LGL2G561MELC30|
|680|30×45|1740|1.56|LGL2G681MELB45|
||35×35|1740|1.56|LGL2G681MELC35|
|820|30×50|1920|1.71|LGL2G821MELB50|
||35×40|1920|1.71|LGL2G821MELC40|
|1000|35×50|2200|1.89|LGL2G102MELC50|



||450V (2W)|450V (2W)|450V (2W)|450V (2W)|
|---|---|---|---|---|
|Cap.<br>(µF)|Size<br>φD×L(mm)|Rated ripple<br>(mArms)|Leakage Current<br>(mA)|Code|
|120|22×25|690|0.69|LGL2W121MELZ25|
|150|22×30|740|0.77|LGL2W151MELZ30|
||25×25|740|0.77|LGL2W151MELA25|
|180|22×35|770|0.85|LGL2W181MELZ35|
||25×30|770|0.85|LGL2W181MELA30|
|220|22×40|850|0.94|LGL2W221MELZ40|
||25×35|850|0.94|LGL2W221MELA35|
||30×25|820|0.94|LGL2W221MELB25|
|270|22×45|930|1.04|LGL2W271MELZ45|
||25×40|930|1.04|LGL2W271MELA40|
||30×30|930|1.04|LGL2W271MELB30|
|330|25×45|1120|1.15|LGL2W331MELA45|
||30×35|1120|1.15|LGL2W331MELB35|
||35×25|1070|1.15|LGL2W331MELC25|
|390|25×50|1280|1.25|LGL2W391MELA50|
||30×40|1280|1.25|LGL2W391MELB40|
||35×30|1280|1.25|LGL2W391MELC30|
|470|30×45|1480|1.37|LGL2W471MELB45|
||35×35|1480|1.37|LGL2W471MELC35|
|560|30×50|1660|1.50|LGL2W561MELB50|
||35×40|1660|1.50|LGL2W561MELC40|
|680|35×45|1770|1.65|LGL2W681MELC45|
|820|35×50|1930|1.82|LGL2W821MELC50|



Rated ripple current (mArms) at 105°C 120Hz 

CAT.8100M