LFMWLT60-1002

AC/DC Open Frame Power Supply (PSU), Medical, 1 Output, 65 W, 90V AC to 264V AC

⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.

Manufacturer: EOS POWER
Product type: AC / DC Open Frame Power Supplies
SVHC: To Be Advised
Product Range: MWLT60 Series
No. of Outputs: 1 Output
Input Voltage VAC: 90V AC to 264V AC
Power Supply Output Type: Adjustable, Fixed
Output Current - Output 1: 4.33A
Output Current - Output 2: -
Output Current - Output 3: -
Output Current - Output 4: -
Output Voltage - Output 1: 15VDC
Output Voltage - Output 2: -
Output Voltage - Output 3: -
Output Voltage - Output 4: -
Power Supply Applications: Medical
Power Rating (Forced Cooling): -
Power Rating (Convection Cooling): 65W

Delivery and price
Units per pack	100
Price	27.78 €
Current stock	10+
Lead time	30 days

Datasheet

**60 Watt Medical (MWLT)** 

## Features 

- l 4 x 2 x 1.2 inches l Ultra high efficiency > 85% 

- l 50-65 W from 1 to 3 outputs 

- l Low leakage current < 250 µA 

- l Nemko, UL & CSA approvals to IEC60601 

- l EN55022-B, CISPR22-B, FCC Part15 Level B, IEC60601 ~~-~~ 1 ~~-~~ 2 

- l No Load Power < 0.3 W 

- l Class I & Class II options 

- l Cover kit accessory available l Meets standard IEC60601-1-2 : 2014 (4th Edition) 

|Electrical Specifications|Electrical Specifications|Electrical Specifications|
|---|---|---|
||AC Input<br>90-264 V, Universal||
||Input Frequency5<br>47-400 Hz||
||Input Current<br>120 VAC: 1.5 A max.<br>230 VAC: 0.75 A max.||
||No Load Power<br>< 0.3 W for single output models; < 0.5 W for multi output models||
||Inrush Current<br>120 VAC: 30 A max.<br>230 VAC: 60 A max.||
||Leakage Current<br>120 VAC: < 140µA<br>230 VAC: < 250µA||
||Efficiency1<br>120 VAC: 85% typical<br>230 VAC: 85% typical||
||Hold-upTime<br>>10 ms @ 120 VAC typical||
||Output Power<br>50-65 W||
||Line Regulation<br>+/-0.3%||
||Load Regulation<br>V1:+/-0.5%; V2 & V3:+/-5%||
||Transient Response<br>< 10%, 50% to 100% load change, 50/60 Hz, 50% duty cycle, 0.1 A/µs,<br>recovery time < 5 ms||
||Rise Time<br>< 100 ms||
||Set Point Tolerance<br>V1:+/-3%; V2 & V3:+/-5%||
||Output Adjustability<br>V1:+/~~-~~10%||
||Over Current Protection<br>130% typical above rating||
||Over Voltage Protection<br>130% typical for V1 only||
||Short Circuit Protection<br>Short term, autorecovery||
||Switching Frequency<br>Approximately 67 kHz||
||Operating Temperature<br>~~-~~20 to 70°C, refer derating curve;~~-~~20 to 0°C, start-up is guaranteed||
||Storage Temperature<br>~~-~~40 to+85°C||
||Relative Humidity<br>95% Rh, noncondensing||
||Altitude<br>Operating: 10,000 ft.; Nonoperating: 40,000 ft.||
||MTBF<br>1.87m Hours, Telcordia -SR332-issue 3||
||Isolation Voltage<br>4000 VAC Input to Output, 2MOPP, 1500 VAC Input to Earth, 1MOPP,<br>500 VAC Output to Earth, 1MOPP||
|Cooling<br>Convection|||



~~4EM-19-180                                                                                                                                                          39-DE60-46350-002 / E4~~ 

**==> picture [478 x 221] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||||||
|---|---|---|---|---|---|---|---|
|Model Number|Voltage|Max. Load|[2]|Min. Load|[6]|Ripple|[3]|
|LFMWLT60-1000|V1=5.1 V|10.0 A|0.0 A|1%|
|LFMWLT60-1001|V1=12 V|5.4 A|0.0A|1%|
|LFMWLT60-1002|V1=15 V|4.33 A|0.0 A|1%|
|LFMWLT60-1003|V1=24 V|2.7 A|0.0 A|1%|
|LFMWLT60-1004|V1=48 V|1.35 A|0.0 A|1%|
|LFMWLT60-3000|V1=5.2 V, V2=12.5 V,|V1=8.0 A, V2=3.0 A,|V1=0.5 A, V2=0.1 A,|
|1%|
|V3=-12.8 V|V3=0.5 A|V3=0.0 A|
|LFMWLT60-3001|V1=5.2 V, V2=24 V,|V1=8.0 A, V2=1.5 A,|V1=0.5 A, V2=0.1 A,|
|1%|
|V3=-12.8 V|V3=0.5 A|V3=0.0 A|
|LFMWLT60|-|3002|V1=5.2 V, V2=15 V,|V1=8.0 A, V2=2.5 A,|V1=0.5 A, V2=0.1 A,|
|1%|
|V3=|-|15 V|V3=0.5 A|V3=0.0 A|
|LFMWLT60|-|3003|V1=3.3 V, V2=5.2 V,|V1=6.0 A, V2=3.0 A,|V1=1.0 A, V2=0.1 A,|V1=1.5%,|
|V3=|-|12.8 V|V3=0.5 A|V3=0.0 A|V2 & V3=1%|
|LFWLT60|-|CK metal cover|kit accessory|

**----- End of picture text -----**<br>


**==> picture [194 x 177] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||
|---|---|---|
|Connectors|
|J1|Pin 1|AC LINE|
|Pin 2|AC NEUTRAL|
|Spade Connector|EARTH|
|J2|Pin 1|V1|
|Pin 2|V1|
|Pin 3|RTN|
|Pin 4|RTN|
|Pin 5|V3|
|Pin 6|V2|
|J3|Pin 1|+V1 SENSE|
|Pin 2|-V1 SENSE|

**----- End of picture text -----**<br>


## Notes 

~~1. For MWLT60-3003 effciency is 75% typical.~~ 

- 

- ~~2. Single output models deliver 65 W, except MWLT60 1000 (50 W).~~ 

- 

- ~~Triple output models deliver 60 W, except MWLT60 3003 (45 W).~~ 

~~3. Maximum current per output channel. Do not exceed total output power rating.~~ 

~~4. Ripple is peak to peak with 20 MHz bandwidth and 10 µF (Electrolytic capacitor) in parallel with a 0.1 µF capacitor at rated line~~ voltage and load ranges. 

5. Safety approved 47 ~~-~~ 63 Hz. 

6. Min Load specified to meet cross regulation. 

7. Class II version available, Add “-II” suffx at the end of the Model Number. 

8. Specifcations are for nominal input voltage, 25[o] C and max. load unless otherwise stated. 

~~9. Derate output power linearly to 80% from 90 VAC to 80 VAC input.~~ 

~~10. Please  refer mechnical outline drawing for height of component above and below PCB for - 1xxx & 3xxx.~~ 

~~11. When used in Cover Kit, de-rate output power to 70 % under all operating conditions.~~ 

~~**2**~~ Innovatons in Power 39-DE60-46350-002 / E4 ~~[EQs]~~ 

4EM-19-180 

**==> picture [54 x 53] intentionally omitted <==**

**==> picture [511 x 514] intentionally omitted <==**

**----- Start of picture text -----**<br>
Mechanical Specifications<br>AC Input Connector (J1)  Molex: 26 - 60 - 4030 or equivalent<br>Mating: 09-50-3031; Pins: 08-50-0106<br>EARTH  Molex: 19705 - 4301<br>Mating: 190030001<br>-<br>DC Output Connector (J2)  Tyco: 640445 6 or equivalent<br>Mating: 647402-6; Pins: 3-647409-1<br>Signal Connector (J3)  Molex: 22 - 23 - 2021 or equivalent<br>Mating: 22-01-2021<br>Dimensions  4.0 x 2.0 x 1.2 inches<br>(101.6 x 50.8 x 30.48 mm)<br>Weight   150 g<br>EMC*<br>     Parameter      Conditions/Description      Criteria<br>Conducted Emissions EN 55011-B,CISPR22-B, FCC PART15-B Pass<br>Radiated Emissions EN 55011 B Pass<br>Input Current Harmonics EN 61000-3-2 Class A<br>Voltage Fluctuation and Flicker EN 61000-3-3 Pass<br>ESD Immunity EN 61000-4-2 Level 4, Criterion A<br>Radiated Field Immunity EN 61000-4-3 Level 3, Criterion A<br>Electrical Fast Transient Immunity EN 61000-4-4 Level 3, Criterion A<br>Surge Immunity EN 61000-4-5 Level 3, Criterion A<br>Conducted Immunity EN 61000-4-6 Level 3,  Criterion A<br>Magnetic Field Immunity EN 61000-4-8 Level 4, Criterion A<br>Voltage dips, interruptions EN 61000-4-11 Criterion  A & B<br>Safety*<br>CE Mark  Complies with LVD Directive<br>Approval Agency  Nemko, UL, C - UL<br>Safety Standard(s)  EN60601-1, IEC60601-1 (ed.3),<br>ANSI / AAMI ES 60601 - 1, CSA C22.2 No. 60601-1<br>*Safety File Number(s)  Class I : Nemko: P16220642, NO90138      UL/C-UL: E173812<br>Class II : Nemko: P13216630, NO73023      UL/C-UL: E173812<br>**----- End of picture text -----**<br>


4EM-19-180 39-DE60-46350-002 / E4 

**==> picture [66 x 12] intentionally omitted <==**

**----- Start of picture text -----**<br>
Derating Curve<br>**----- End of picture text -----**<br>


De-rate linearly from 100% at 50°C to 50% at 70°C 

**==> picture [91 x 35] intentionally omitted <==**

**----- Start of picture text -----**<br>
Mechanical Drawing<br>MWLT60 - 1xxx<br>**----- End of picture text -----**<br>


Notes: In case the PCB is mounted in a metal enclosure, using metal hardware ensure the following 

1. Stand off, used to mount PCB has OD of 5.4 mm max. 

2. Screws, used to fix PCB on stand off, have head dia of 6.0 mm max. 

3. Washer, if used, to have dia of 6.5 mm max. 

**==> picture [85 x 50] intentionally omitted <==**

**----- Start of picture text -----**<br>
4<br>am Le!)<br>Innovations in Power<br>**----- End of picture text -----**<br>


4EM-19-180                                                   39-DE60-46350-002 / E4 

**==> picture [91 x 201] intentionally omitted <==**

**----- Start of picture text -----**<br>
Mechanical Drawing<br>MWLT60 - 3xxx<br>[95.25+0.2<br>WDcy<br>J2<br>60<br>:<br>7<br>°<br>1C¢<br>Ton<br>Hi<br>cs<br>a<br>EMC* SD<br>**----- End of picture text -----**<br>


Notes: In case the PCB is mounted in a metal enclosure, using metal hardware ensure the following 

1. Stand off, used to mount PCB has OD of 5.4 mm max. 

2. Screws, used to fix PCB on stand off, have head dia of 6.0 mm max. 

3. Washer, if used, to have dia of 6.5 mm max. 

4EM-19-180 39-DE60-46350-002 / E4

Updated at April 22, 2026

About Novapart

Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.

Learn more →

Stock Shortage Specialist

When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.

Request a quote →

Compliant Alternatives

We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.

BOM Analysis service →