Image not available
Illustrative purposes only
LCL300PS48
AC/DC Enclosed Power Supply (PSU), ITE, 1 Outputs, 320 W, 48 VDC, 6.7 A
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: XP POWER
- Product type: AC / DC Enclosed Power Supplies
- Product Range: LCL
- No. of Outputs: 1Outputs
- Output Power Max: 320W
- Input Voltage VAC: 85V AC to 264V AC
- Input Voltage AC Max: 264V
- Input Voltage AC Min: 85V
- Power Supply Approvals: ITE
- Power Supply Output Type: Fixed
- Output Current - Output 1: 6.7A
- Output Voltage - Output 1: 48VDC
| Delivery and price | |
|---|---|
| Units per pack | 1 |
| Price | 54.06 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
**Watts** xppower.com ## **LCL Series** - Single Output Industrial Supplies - High Efficiency - Low Cost - 150 W Convection Cooled - 300 W & 500 W with Internal Fans - Outputs from 12 V to 48 V - 3 Year Warranty ## **S** ~~**pecification**~~ ## **Input** Input Voltage • 85-264 VAC (127-370 VDC) (see note 1) Input Frequency • 47-63 Hz Input Current • 2.1 A max for LCL150, 4.5 A max for LCL300, 6.6 A max for LCL500 Inrush Current • 40 A max for LCL150, 60 A max for LCL300 & 500 cold start at 25 °C, 230 VAC Power Factor • >0.9 Earth Leakage Current • <2 mA at 264 VAC, 60 Hz Input Protection • LCL150: T3.15 A/250 V, LCL300: T6.3A/250 V, LCL500: T10A/250 V, internal fuse fitted in line ## **General** - Efficiency • 88% typical at full load & 230 VAC Isolation • 3000 VAC Input to Output 1500 VAC Input to Ground 500 VAC Output to Ground - Switching Frequency • 90-110 kHz main converter & 45-190 kHz PFC for LCL150, 80-190 kHz main converter & 62-65 kHz PFC for LCL300 & 500 - Power Density • 2.7 W/in[3] LCL150, 4.4 W/in[3] LCL300, 4.9 W/in[3] LCL500 - MTBF • LCL150: >489 kHrs, LCL300: >235 kHrs, LCL500: >211 kHrs to MIL-HBK-217F at 25 °C, GB ## **Environmental** ## **Output** - Output Voltage • See tables Output Voltage Trim • See tables Initial Set Accuracy • ±100 mV at 50% load Minimum Load • None required Start Up Delay • 2 s max for LCL150, 1.5 s max for LCL300, 0.8 s max for LCL500 - Start Up Rise Time • 50 ms max for LCL150, 35 ms max for LCL300 & LCL500 - Hold Up Time • 10 ms min at 115 VAC and full load Line Regulation • ±0.5% max for LCL150, ±0.3% for LCL300 & LCL500 - Load Regulation • ±1% max Transient Response • 4% max deviation recovery to within 1% in 500 µs for a 50% load change - Ripple & Noise • See tables Overvoltage Protection • 110-140%, recycle input to reset Overtemperature • Output turns off when OTP triggered, Protection measured internally, auto recovery Overload Protection • 110-150% of rated output power. Delayed by 1 s min to allow for peak loads. - Short Circuit Protection • Trip and restart (hiccup mode), auto recovery - Remote Sense • Fitted to LCL500 only, compensates for 0.25 V max each line - Remote On/Off • Fitted on LCL500 only, On = logic low or open circuit, Off = logic high - Operating Temperature • -10 °C to +70 °C, derate from 100% load at 50 °C to 50% load at 70 °C - Cooling • LCL150 convection cooled, LCL300 & LCL500 have internal fans - Operating Humidity • 5% to 90% non condensing Storage Temperature • -40 °C to +85 °C Operating Altitude • 3000 m Vibration • 10-500 Hz, 2 g, 10 mins per cycle on 3 axes ## **EMC & Safety** - Emissions • EN55022 level B conducted, level A radiated - Harmonic Currents • EN61000-3-2 class A LCL150: EN61000-3-2 class C for loads ≥40% LCL300 & LCL500: EN61000-3-2 class C for loads ≥20% - Voltage Flicker • EN61000-3-3 ESD Immunity • EN61000-4-2, ±4 kV contact, ±8 kV air discharge, Performance Criteria A - Radiated Immunity • EN61000-4-3, level 2 Perf Criteria A EFT/Burst • EN61000-4-4, level 2 Perf Criteria A Surge • EN61000-4-5, installation class 3, Perf Criteria A - Conducted Immunity • EN61000-4-6, level 2 Perf Criteria A Magnetic Field • EN61000-4-8, 1 A/m Perf Criteria A Dips & Interruptions • EN61000-4-11, 30% 10 ms, 60% 100 ms, 100% 5000 ms, Perf Criteria A, B, B - Safety Approvals • EN60950-1, UL60950-1, CSA60950 No 22.2 **LCL150** ## ~~**Model and Ratings**~~ |Output Power(1)|Output Voltage|Trim Range|Output Current|Ripple & Noise(2)|Model Number| |---|---|---|---|---|---| |150 W|12.0 V|11.0-13.0 V|12.5 A|100 mV pk-pk|LCL150PS12| ||13.5 V|12.5-14.5 V|11.1 A|100 mV pk-pk|LCL150PS13| ||15.0 V|14.0-16.0 V|10.0 A|100 mV pk-pk|LCL150PS15| ||24.0 V|23.0-25.0 V|6.3 A|150 mV pk-pk|LCL150PS24| ||27.0 V|26.0-28.0 V|5.6 A|150 mV pk-pk|LCL150PS27| ||48.0 V|47.0-49.0 V|3.1 A|250 mV pk-pk|LCL150PS48| ## ~~**Notes**~~ _1. Output power derates linearly from 100% at 90 VAC to 90% at 85 VAC._ _2. Measured with 20 MHz bandwidth._ ## ~~**Mechanical Details**~~ **==> picture [311 x 268] intentionally omitted <==** **----- Start of picture text -----**<br> 1.02<br>(26.0)<br>1.97 | @<br>iT "ee —<br>(50.0) 0.90(23.0) a)—°————<br>0.57 —<br>(14.5) iL | FA ppooe —pppon:_——oono===g J<br>4.64 (118.0)<br>4 x M4 x 0.7 THD<br>0.15 (3.8) Max Screw Penetration<br>Terminal Block, M4 Screw 7 pins 0.37 (9.5) centre<br>oo OD DY OD CD<br>oa OD DY MY MH<br>1 ——_—— eS SSeS<br>(95.0)3.74 K o oyeosO_OCODVO MDMD<br>r e oy OH] OH OH<br>BKe e} ososuODSONYa5 OSE—iSODHD<br>7 k o amy HI HU — O ONY DHCO<br>eeeee<br>J1 7.55 (192.0)<br>1.02 4.64<br>(26.0) (118.0) 4 x M4 x 0.7 THD<br>0.15 (3.8) Max Screw Penetration<br>0.57<br>(14.5) | f_, sooner<br>(23.0)0.90 ] ° cs)— » a ; Cc_c<br>**----- End of picture text -----**<br> **==> picture [134 x 50] intentionally omitted <==** **----- Start of picture text -----**<br> 2.44 (62.0) 2.83 (72.0)<br>2 x M4 x 0.7 THD<br>0.15 (3.8) Max Screw Penetration<br>**----- End of picture text -----**<br> |Pin<br>1|Function<br>+Vout| |---|---| |2|+Vout| |3|-Vout| |4|-Vout| |5|Ground| |6|Neutral| |7|Line| ## ~~**Notes**~~ 1. All dimensions shown in inches (mm). 3. Tolerance is ±0.05 (±0.2) maximum. 2. Weight: 1.39 lbs (630 g) approx. **==> picture [455 x 137] intentionally omitted <==** **----- Start of picture text -----**<br> 100 100<br>80 90<br>60<br>40<br>20<br>-10 0 10 20 30 40 50 60 70 85 90 100 110 120 230 240 250 264<br>Ambient Temperature (°C) Input Voltage (VAC)<br>Output Power (%) Output Power (%)<br>**----- End of picture text -----**<br> **LCL300** ## ~~**Model and Ratings**~~ |Output Power(1)|Output Voltage|Trim Range|Output Current|Ripple & Noise(2)|Model Number| |---|---|---|---|---|---| |300 W|12.0 V|11.0-13.0 V|25.0 A|150 mV pk-pk|LCL300PS12| ||13.5 V|12.5-14.5 V|22.0 A|150 mV pk-pk|LCL300PS13| ||15.0 V|14.0-16.0 V|20.0 A|150 mV pk-pk|LCL300PS15| |310 W|24.0 V|23.0-25.0 V|13.0 A|150 mV pk-pk|LCL300PS24| |315 W|27.0 V|26.0-28.0 V|11.7 A|200 mV pk-pk|LCL300PS27| |320 W|48.0 V|47.0-49.0 V|6.70 A|240 mV pk-pk|LCL300PS48| ## ~~**Notes**~~ _1. Output power derates linearly from 100% at 90 VAC to 90% at 85 VAC._ _2. Measured with 20 MHz bandwidth._ ## ~~**Mechanical Details**~~ **==> picture [409 x 318] intentionally omitted <==** **----- Start of picture text -----**<br> 8.07 (205.0 )<br>3 x M4 x 0.7 THD<br>0.15 (3.8) Max Screw Penetration<br>1.97<br>(50.0)0.94<br>(24.0) LJ — nnaAAA nAAAA nAAA A + J<br>0.63 (16.0)<br>Terminal Block, M4 Screw 9 pins 0.37 (9.5) centre<br>Y + 4 x M4 x 0.7 THD UEREE BUREE JEEUE<br>1 0.15 (3.8) Max Screw Penetration<br>4.33<br>1.97<br>(110.0) — - - —) + —)SS (50.0) L i |<br>9<br>“Al ° | on00 oo00 goo00<br>J1 0.63<br>7.44 (189.0) (16.0) 6.81 (173.0)<br>3 x M4 x 0.7 THD<br>0.15 (3.8) Max Screw Penetration<br>UUUU D UUUU U Boo J1 Pin Connections<br>(50.0)1.97 +=| (25.0)0.98 Pin1 Function+Vout<br>0.50 2 +Vout<br>| (12.5)<br>| 3 +Vout<br>6.81 (173.0) 4 -Vout<br>5 -Vout<br>6 -Vout<br>7 Ground<br>8 Neutral<br>Notes 9 Line<br>1. All dimensions shown in inches (mm 3. Tolerance is ±0.05 (±0.2) maximum.<br>2. Weight: 1.94 lbs (880 g) approx. 4. Airflow direction is out of the unit at fan.<br>**----- End of picture text -----**<br> ## ~~**Derating Curves**~~ **==> picture [452 x 140] intentionally omitted <==** **----- Start of picture text -----**<br> 100 100<br>80 90<br>60<br>40<br>20<br>CHE S etter<br>-10 0 10 20 30 40 50 60 70 85 90 100 110 120 Sf 230 240 250 264<br>Ambient Temperature (°C) Input Voltage (VAC)<br>Output Power (%) Output Power (%)<br>**----- End of picture text -----**<br> **LCL500** ## ~~**Model and Ratings**~~ |Output Power(1)|Output Voltage|Trim Range|Output Current|Ripple & Noise(2)|Model Number| |---|---|---|---|---|---| |500 W|12.0 V|11.0-13.0 V|42.0 A|120 mV pk-pk|LCL500PS12| ||13.5 V|12.5-14.5 V|37.0 A|150 mV pk-pk|LCL500PS13| ||15.0 V|14.0-16.0 V|34.0 A|150 mV pk-pk|LCL500PS15| ||24.0 V|23.0-25.0 V|21.0 A|150 mV pk-pk|LCL500PS24| ||27.0 V|26.0-28.0 V|18.5 A|150 mV pk-pk|LCL500PS27| ||48.0 V|47.0-49.0 V|10.5 A|240 mV pk-pk|LCL500PS48†| ## ~~**Notes**~~ _1. Output power derates linearly from 100% at 90 VAC to 90% at 85 VAC._ _2. Measured with 20 MHz bandwidth._ ## ~~**Mechanical Details**~~ **==> picture [471 x 489] intentionally omitted <==** **----- Start of picture text -----**<br> 4 x M4 x 0.7 THD<br>1.41 0.15 (3.8) Max Screw Penetration<br>| (36.0)<br>2.08 1.00<br>(53.0) (25.5)<br>0.60<br>Sama<br>ma Oh (15.0)<br>4 x M4 x 0.7 THD<br>Terminal Block, M4 Screw 9 pins 0.37 (9.5) centre 0.15 (3.8) Max Screw Penetration(3.8) Max Screw Penetration3.8) Max Screw Penetration<br>1 =) i iidehily Wudhi Buuue<br>J2<br>4 AIRFLOW<br>1<br>5.00 3.54<br>(127.0) (90.0)<br>9<br>J1 9.21 (234.0) 7.75 (197.0) | (36.0)1.41<br>9.84 (250.0)<br>1.41 7.75 (197.0) 0.60 J1 Pin Connections J2 Pin<br>(0.36) (15.0) Pin Function Pin Function<br>tun pouuU a 1 +Vout 1 Remote<br>1.00 2 +Vout 2 Remote<br>=S\|_J| (25.5) 3 +Vout 34 SenseSense +-<br>4 x M4 x 0.7 THD 4 -Vout<br>0.15 (3.8) Max Screw Penetration5 -Vout Applying >4.5 V to Pin 2<br>6 -Vout respect to Pin 1 turns<br>7 Ground Applying <0.8 V to Pin 2<br>respect to Pin 1 or open<br>8 Neutral<br>turns output on.<br>9 Line<br>shown in inches (mm). 3. Tolerance is ±0.05 (±0.2) maximum. Mating Connectors (J2):<br>3.2 lbs (1.45 kg) approx. WST P4-I25002 housing<br>WST I25002BS contacts<br>Curves<br>100 100<br>80 90<br>60<br>40<br>20<br>-10 CHEE 0 10 20 30 40 50 R 60 70 85 ises 90 100 110 120 S 230 a e 240 250 e 264<br>Ambient Temperature (°C) Input Voltage (VAC)<br>Output Power (%) Output Power (%)<br>**----- End of picture text -----**<br> **==> picture [167 x 109] intentionally omitted <==** **----- Start of picture text -----**<br> 4 x M4 x 0.7 THD<br>0.15 (3.8) Max Screw Penetration(3.8) Max Screw Penetration3.8) Max Screw Penetration<br>Wudhi Buuue<br>3.54<br>(90.0)<br>| 1.41<br>7.75 (197.0) (36.0)1.41<br>**----- End of picture text -----**<br> |J2 Pin Connections|J2 Pin Connections| |---|---| |Pin<br>1|Function<br>RemoteOn/Off| |1<br>2|Remote On/Off -<br>Remote On/Off +| |34<br>4|Sense -<br>SenseSense +-| Applying >4.5 V to Pin 2 with respect to Pin 1 turns output off. Applying <0.8 V to Pin 2 with respect to Pin 1 or open circuit turns output on. ## ~~**Notes**~~ 1.Dimensions shown in inches (mm). 3. Tolerance is ±0.05 (±0.2) maximum. 2. Weight: 3.2 lbs (1.45 kg) approx. ## ~~**Derating Curves**~~ 03-July-14
Updated at February 9, 2023
XP Power is a globally recognized leader in the design and manufacture of critical power solutions for the electronics industry. With a steadfast commitment to total quality and in-house engineering expertise, the company delivers highly reliable components that support complex applications across the industrial, healthcare, and technology sectors. Their extensive manufacturing capabilities provide engineers with a broad and dependable source for innovative power products. Our extensive portfolio of XP Power components is heavily focused on robust power and line protection. The core of this offering features a vast selection of high-performance AC/DC converters, designed to meet the rigorous efficiency and footprint demands of modern electronic systems. Complementing these are numerous reliable DC/DC converters, providing versatile options for precise voltage regulation and seamless system integration. Beyond their primary power conversion ranges, XP Power manufactures specialized components to address specific design challenges. Our selection includes essential passive components, such as power line filters for effective EMC and RFI suppression, ensuring signal integrity and strict regulatory compliance. Additionally, we provide dedicated AC/DC LED power supplies tailored for reliable, long-lasting performance in advanced commercial and industrial lighting applications.
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →