LCB100Q

## a, a **POWER** eS i **Data Sheet** 

## **LCB100** 100 Watt Single Output Power Supply 

**Total Power:** 100 W **# of Outputs:** Single **Outputs:** 3.3 - 48 V 

## SPECIAL FEATURES 

No-load power consumption 0.5 W 

- Low cost 

5.1” x 3.9” x 1.5” 

10% output voltage adjust 

- -25 °C to 70 °C with derating High efficiency: 90% @ 230 Vac 

- Power ON with LED indicator 

Withstand 5G vibration test 

- Two year warranty 

## COMPLIANCE 

EMI Class B EN61000, EN61204-3 

## SAFETY 

UL, cUL 60950-1 TUV 60950-1 

CE 

## **Electrical Specifications** 

## **Input** 

|Input ra nge|88 - 264 Vac<br>125 - 373 Vdc|
|---|---|
|Frequency|47 - 63 Hz, Nominal 50/60|
|Inrush current|40 A, cold start at 25 °C, 230 Vac|
|Harmonics|EN61000-3-2: 2000 Class A,<br>EN61000-3-3: 1995+A1:2001|
|Input current|2.5 A / 115 Vac|
|Hold up time|>32 ms / 230 Vac<br>>10 ms / 115 Vac at full load|
|Efficiency|89% typical at full Load / 230 Vac nominal|
|Leakage current|< 2 mA at 264 Vac|
|Isolation|Isolation: PRI-Chassis 1500 Vac<br>PRI-SEC 3000 Vac<br>SEC-Chassis 500 Vac|



## **Electrical Specifications** 

|**Electrical Specificationspecificationsecifications**|**Electrical Specificationspecificationsecifications**|**Electrical Specificationspecificationsecifications**|
|---|---|---|
|**Output**|||
|Output rating|See orderinginformation|90 - 264 Vac|
|Output tolerance|± 1% to 3%|90 - 264 Vac|
|Total regulation range|± 0.5% to 3%|Combined line/load/transient when measured at output terminal|
|Rated load|66 - 110 W|Derate linear to 50% from 50 °C to 70 °C|
|Output noise (PARD)|150 - 200 mV p-p|Main output<br>Measured with a 0.1μF Ceramic and 10μF Tantalum Capacitor on anyoutput, 20 MHz|
|Output voltage overshoot||No overshoot/undershoot outside the regulation band duringon or off cycle|
|Short circuitprotection|Protected, no damage to occur|Bounce mode|
|Output isolation||Standardper safetyrequirements|
|Overloadprotection(OCP)|>110% rated outputpower|Main output|
|Overvoltage protection (OVP)|115% to 150%|Main output|
|Output voltage adjust|± 10%|Main output|



## **Environmental Specifications** 

|**Operating temperature**|-25 °C to +70 °C, linear derating to 50% from 50 °C to 70 °C|
|---|---|
|**Storage temperature**|-40 °C to +85 °C|
|**Humidity**|20 to 90%, non-condensing.|
|**Vibration**|10 - 500 Hz, 5G 10 min/1 cycle, period for 60 min each along X, Y, Z axes|



## **Ordering Information** 

|**Ordering Informationg Information Information**|**Ordering Informationg Information Information**|**Ordering Informationg Information Information**|**Ordering Informationg Information Information**|**Ordering Informationg Information Information**|**Ordering Informationg Information Information**|
|---|---|---|---|---|---|
|Model Number|Output Voltage|Output Current|Vo Adjust|Output Power|Efficiency|
|LCB100D|3.3 V|20 A|± 10%|66 W|79%|
|LCB100E|5 V|16 A|± 10%|80 W|83%|
|LCB100L|12 V|8.5 A|± 10%|102 W|86%|
|LCB100N|15 V|7 A|± 10%|105 W|88%|
|LCB100Q|24 V|4.5 A|± 10%|108 W|88%|
|LCB100W|48 V|2.3 A|± 10%|110 W|89%|



## ~~|~~ **Miscellaneous Specifications** 

**BURN-IN** 

100% Burn-in at 45 °C, at full load. Duration of burn-in determined by Quality Assurance Procedures. 

## **MTBF** 

The power supply has a minimum MTBF of 206K hours according to MIL-HDBK-217F. 

## **WARRANTY** 

Artesyn Embedded Technologies shall warrant the power supply to be free of defects in materials and workmanship for a minimum period of two years from the date of shipment, when operated within specifications. The warranty shall be fully transferable to the end owner of the equipment powered by the supply. 

## **Mechanical Drawings** 

## **WORLDWIDE OFFICES** 

Americas Europe (UK) Asia (HK) 2900 S.Diablo Way Waterfront Business Park 14/F, Lu Plaza Tempe, AZ 85282 Merry Hill, Dudley 2 Wing Yip Street USA West Midlands, DY5 1LX Kwun Tong, Kowloon +1 888 412 7832 United Kingdom Hong Kong +44 (0) 1384 842 211 +852 2176 3333 

While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. © 2015 Artesyn Embedded Technologies, Inc. 

## **www.artesyn.com** 

For more information: www.artesyn.com/power For support: productsupport.ep@artesyn.com 

LCB100 DS  10Aug2015