L000684-03

## L000684-0X 

2400-2500 / 4900-5900 / 6000-7125 MHz 

Assembly and Installation Instructions 

L000684-03 - Tri-band 2-Port Directional Antenna L000684-04 - Tri-band 4-Port Directional Antenna 

## SPECIFICATIONS 

|Operating Frequency (GHz)|2.4 - 2.5|4.9 - 5.9|6.0 - 7.125|
|---|---|---|---|
|GAIN (dBi)|6.1|6.1|5.4|
|AZIMUTH BEAMWIDTH, H|79°|83°|80°|
|ELEVATION BEAMWIDTH, V|79°|79°|78°|
|PORT ISOLATION|20 dB|25 dB|23 dB|
|IMPEDANCE|50Ω|||
|MAX INPUT POWER|33dBm (2 Watts)|||
|VSWR|< 2:1|||
|DIMENSIONS - mm (in.)|200 x 200 x 46.5 mm (7.87 x 7.87 x 1.83)|||
|WEIGHT – kg (lbs.)|**2-Port:**0.5 (1.10)<br>**4-Port:**0.6 (1.32)|||
|RADOME|**Material:**ASA, Luran S 788T, UV<br>**Color:**White|||
|CABLE LENGTH/ CONNECTOR|75±1.5 cm PLENUM RATED RG58LL/ RP-SMA-MALE|||
|CABLE LENGTH(CM)|75 ± 1.5|||
|TEMPERATURE RANGE (°C)|-50 TO 85|||
|IP RATING|IP67|||



## MECHANICAL DRAWINGS 

2 Port 

4 Port 

## SAFETY 

The antenna and all associated equipment should be installed in accordance with all applicable local and national electrical code guidelines to ensure safe operation. 

## LOCATION 

This antenna can be mounted in indoor or outdoor locations. For the best results, mount the antenna near the center of the coverage area. A line-of-sight path between the antenna and active floor locations generally works best. Although signals penetrate cubical dividers and interior walls with little attenuation, reinforced block walls, banks of metal cabinets, or steel shelving may attenuate signals or cause multipath, a condition where reflected signals interfere with the primary signal path. Avoid mounting next to a column or vertical support that could create a 'shadow zone' of reduced coverage to one portion of the room. 

## APPLICATION 

The antenna is designed and optimized for WLAN MIMO system requirements covering a wide range of operation frequency. The covered frequency range includes the band of 2400-2500/ 4900-5900/ 6000-7125. The antenna offers low cross correlation between the radiation elements making it suitable for MIMO operations. 

## STANDARD MOUNTING 

A nylon articulating mount (L000868-01) is included with L000684-0X antennas, providing two mast clamps. See back of manual for assembly of pole & wall mounted option. 

|ITEM NO|PART NUMBER|DESCRIPTION|QTY|
|---|---|---|---|
|1|120-00244|INJMOLD, ARTICULATING MNT, FLANGE|2|
|2|120-00243|INJMOLD, ARTICULATING MNT, ARM|1|
|3|010083|SCR, SRH,1/4-20x1-1/4in, SS, PA|2|
|4|010104|WASH, FLAT, 1/4in, SS, PA|6|
|5|010084|WASH, S LOC,1/4in, SS, PA|6|
|6|010085|NUT, HEX,1/4-20, SS, PA|2|
|7|101-00120|CLAMP, WMGR, 50mm-135mm, SS, PA|2|
|8|101-00218|BOLT, M5X0.8X14.2mm|4|



**==> picture [527 x 53] intentionally omitted <==**

## MOUNTING OPTIONS 

## **TE TECHNICAL SUPPORT CENTER** 

USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico: +52 (0) 55-1106-0800 Latin/S. America: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 

## te.com 

TE, TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. 

The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. 

However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. 

©2023 TE Connectivity. All Rights Reserved. 

11/23 Original