KXG1212

| 

| 

| 

oO 

**==> picture [463 x 625] intentionally omitted <==**

**----- Start of picture text -----**<br>
SPECIFICATION FOR APPROVAL<br>FR >ae =<br>Description : Magnetic Buzzer<br>Kingstate Part No. : KXG1212<br>eee<br>Customer’s Model No. :<br>Specification No. : TKS-1577<br>eee<br>Number Of The Edition : 1.3<br>_ CUSTOMER'S APPROVED SIGNATURE<br>|<br>_ & 8 EF RPA R23 KINGSTATE ELECTRONICS CORP.<br>——— Address: 10F, No. 69-11, Sec. 2, Chung Cheng E. Rd., Tamshui County, Taipei Hsien, Taiwan, R.O.C.<br>International sales dept.: TEL : 886-2-2809-5651 FAX:886-2-2809-7151<br>httpDomestic: /Wwww.kingstate.com.twsales dept.: TEL:886-2-2809-0668 FAX:886-2-28096748<br>__Approvedby| [|] |_CheckedbyCheckedby | _ _ _IsIs s uedbyuedby |<br>|<br>i 4% Tho fog iSIK‘ cha) (1 05/24/06Qin<br>**----- End of picture text -----**<br>


## **A. SCOPE** 範疇 

This specification applies magnetic buzzer, **KXG1212** 此規格書適用於電磁式蜂鳴器, **KXG1212** 

## **B. SPECIFICATION** 規格 

|**No.**|**Item**|**Unit**|**Specification**|||**Condition**|**Condition**|**Condition**|**Condition**|
|---|---|---|---|---|---|---|---|---|---|
|1|Rated Voltage<br>額定電壓|Vo-p|12.0|Vo-p<br> <br>|<br> <br>||<br>||<br>0V|
|||||||<br>||<br>||
|2|Operating Volt.<br>操作電壓|Vo-p|6.0~16.0|||||||
|||||||||||
|3|Mean Current<br>平均耗電流|mA|Max. 40|Applying rated voltage,2400Hz square wave,<br>1/2duty<br>施以額定電壓,2400Hz,方波,50%負載||||||
|4|Coil Resistance<br>直流阻抗|Ω|140 ± 21|||||||
|5|Sound Output<br>輸出音壓|dBA|Min.85<br>(Typical 92)|Distance at 10cm(A-weight free air). Applying<br>rated voltage 2400Hz,square wave, 1/2duty<br>在自由音場10公分處,施以額定電壓,2400Hz,方<br>波,50%負載||||||
|6|Rated Frequency<br>額定頻率|Hz|2400|||||||
|7|Operating Temp.<br>操作溫度|℃|-30 ~ +70|||||||
|8|Storage Temp.<br>儲存溫度|℃|-40 ~ +85|||||||
|9|Dimension<br>尺寸|mm|φ12.0×H9.5|See attached drawing.<br>請參照外觀尺寸圖||||||
|10|Weight<br>重量|gram|2.0|||||||
|11|Material<br>材質||PBT|||||||
|13|Terminal<br>端子||Pin type (Plating Au)<br>鍍化金|See attached drawing.<br>請參照外觀尺寸圖||||||
|14|Environmental<br>Protection  Regulation<br>環保法規||RoHS|||||||



志豐電子股份有限公司 **KINGSTATE ELECTRONICS CORP 2/6 KXG1212** 

**==> picture [553 x 792] intentionally omitted <==**

**----- Start of picture text -----**<br>
C. TYPICAL FREQUENCY RESPONSE CURVE   頻率響應曲線<br>100<br>90<br>dB<br>80<br>70<br>60<br>50<br>20 200 Hz 2K 20K<br>  D. APPEARANCE DRAWING<br>外觀尺寸圖<br>KXG1212<br>金色印油<br>  01  06<br>週期 年份<br>01 第一週 05---2005<br>02 第二週 06---2006<br>Masking Label<br>Sound 9.5 5.5<br>Emission<br>Potting<br>Hole<br>Tol: ± 0.5<br>    Unit: mm<br>志豐電子股份有限公司 KINGSTATE ELECTRONICS CORP  3/6    KXG1212<br>0.1<br>±<br>0.6<br>2-<br>12.0 6.5<br>**----- End of picture text -----**<br>


## **E. MEASUREMENT METHOD** 測量方式 

## **F. MECHANICAL CHARACTERISTICS** 機械特性 

|**No.**|**Item**|**Test condition**|**Evaluation standard**|
|---|---|---|---|
|1|Solderability<br>焊錫附著性|Lead terminals are immersed in rosin for 5 seconds and then<br>immersed in solder bath of +270±5℃for 3±1 seconds.<br>端子部份浸入松香溶液5秒後,再浸入+270±5℃溶融焊鍚槽中3±1秒.|.<br>90% min. lead terminals<br>shall be wet with solder.<br>(Except the edge of<br>terminal)<br>浸入端子部份附著焊鍚<br>90%以上.(末端斷面不算)|
|2|Soldering Heat<br>Resistance<br>焊錫耐熱性|Lead terminal are immersed up to 1.5mm from sounder’s body in<br>solider bath of +260±5℃for 3±1 seconds.<br>距離端子根部1.5mm的位置,浸入+260±5℃的焊鍚槽3±1秒.|No interference in<br>operation<br>操作上無任何不良|
|3|Terminal<br>Mechanical<br>Strength<br>端子強度|The force 10 seconds of 9.8N (1.0kg) is applied to each terminal in<br>axial direction.<br>各端子的軸方向施以9.8N(1.0kg)的力量10秒.|No damage and cutting off<br>端子不鬆動,不脫落|
|4|Vibration<br>振動測試|Buzzer shall be measured after being applied vibration of<br>amplitude of 1.5mm with 10 to 55hz band of vibration frequency to<br>each of 3 per-pendicular directions for 2 hours.<br>振動週波數10∼55HZ、全振幅1.5mm於X.Y.Z 3個方向,各2小時.|.<br>After the test the part shall<br>meet specifications<br>with-out any damage in<br>appearance and<br>the SPL should be in<br>±10dB compared with<br>initial one.<br>經測試後,單體除音壓外,外<br>觀及電氣特性須符合規格.<br>輸出音壓變化量須在<br>±10dBA內.|
|5|Drop test<br>落下測試|The part only shall be dropped from a height of 75cm onto a 40mm<br>thick wooden board 3 times in 3 axes (X.Y.Z). (a total of 9 times).<br>單體從75公分高處, X.Y.Z.3個方向,各3回,落於40mm厚木板上.||



志豐電子股份有限公司 **KINGSTATE ELECTRONICS CORP 4/6 KXG1212** 

## **G. ENVIRONMENT TEST** 環境測試 

**No. Item Test condition Evaluation standard** High temp. test After being placed in a chamber at +85℃ for 96 hours. 1 高溫測試 置於+85℃環境中96 小時 Low temp. test After being placed in a chamber at -40℃ for 96 hours. 2 低溫測試 置於-40℃環境中96 小時 The part shall be subjected to 10 cycles. One cycle shall consist of; 對單體施以熱衝擊試驗 10 次循環 , 其循環內容如圖示 +85℃ -40℃ After the test the part shall meet specifications Thermal Shock 3 熱衝擊試驗 30 min.      30 min. with-out any degradation in appearance and performance except SPL. after 4 hours at +25℃. 60 min. the SPL should be in ±10dBA compared with The part shall be subjected to 10 cycles. One cycle shall be 24 initial one. hours and consist of; 經測試後, 靜置於+25℃ 單體承受溫度/溼度循環測試10 次.其循環內容如圖示 （室溫）環境中 4 小時後, 單體除音壓外,外觀及電氣 +85℃ 特性須符合規格. 輸出音 Temp./ Humidity a,b : 90~98%RH 壓變化量須在±10dBA 內 . 4 Cycle c : 80~98%RH 溫度/溼度循環測試 a      b +25℃ 3hrs 12 ± 0.5 hrs 3 hrs c 24hours 

## **H. RELIABILITY TEST** 信賴性測試 

**No. Item Test condition Evaluation standard** After the test the part shall meet specifications 1.Continuous life test 高溫壽命測試(連續) with-out any degradation The part shall be subjected to 72 hours at +45℃ with in appearance and 12V, 2400Hz applied. performance except SPL. 在+45℃環境下,輸入 12V,2400Hz 連續操作 72 小時. after 4 hours at +25℃. Operating the SPL should be in 1 life test 2.Intermittent life test 室溫壽命測試(間歇) ±10dBA compared with 壽命測試 initial one. A duty cycle of 1 minute on, 1 minutes off, a minimum of 10000 times 經測試後, 靜置於+25℃ at room temp.( +25±10℃) with 12V,2400Hz applied. 在室溫下(+25±10℃), 輸入 12V,2400Hz 通電 1 分鐘/斷電 1 分 （室溫）環境中 4 小時後, 鐘,測試 10000 次循環. 單體除音壓外,外觀及電氣 特性須符合規格. 輸出音 壓變化量須在±10dBA 內. **TEST CONDITION.** Standard Test Condition  : a) Temperature : +5 ~ +35℃  b) Humidity : 45-85%  c) Pressure : 860-1060mbar 一般測試條件    :   a) 溫度 : +5 ~ +35℃        b) 濕度 : 45-85% c) 氣壓 : 860-1060mbar Judgement Test Condition : a) Temperature : +25 ± 2℃   b) Humidity : 60-70%  c) Pressure : 860-1060mbar 爭議時測試條件  :  a) 溫度 : +25 ± 2℃          b) 濕度 : 60-70% c) 氣壓 : 860-1060mbar 

## **TEST CONDITION.** 

志豐電子股份有限公司 **KINGSTATE ELECTRONICS CORP 5/6 KXG1212** 

## **I. PACKING STANDARD** 包裝規格 

**==> picture [486 x 739] intentionally omitted <==**

**----- Start of picture text -----**<br>
100PCS<br>TRAY<br>Out Box<br>(5PCS Tray)<br>Carton Box<br>(12PCS Out Box)<br>Tray 184mmx184mmx23mm 1x100PCS=100PCS<br>Out Box 200mmx190mmx100mm 5LAYERx100PCS=500PCS<br>Carton Box 440mmx400mmx310mm 500PCSx12=6000PCS<br>400mm<br>440mm<br>310mm<br>**----- End of picture text -----**<br>


志豐電子股份有限公司 **KINGSTATE ELECTRONICS CORP 6/6 KXG1212**