KTS-WB91241152ZZZZ

KTS-WB91241152ZZZZ KTS 

**CONTRAST SENSORS** 

**KTS-WB91241152ZZZZ | KTS** CONTRAST SENSORS 

## Ordering information 

**Type Part no.** i, ~~|~~ A tig, S y KTS-WB91241152ZZZZ 1078124 

**==> picture [156 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
Other models and accessories  www.sick.com/KTS<br>**----- End of picture text -----**<br>


Illustration may differ 

**==> picture [108 x 24] intentionally omitted <==**

**----- Start of picture text -----**<br>
CEDLISTED OG<br>**----- End of picture text -----**<br>


## Detailed technical data 

## Features 

|**Special applications**|Standard|
|---|---|
|**Device type**|Standard|
|**Dimensions (W x H x D)**|26 mm x 62 mm x 47.5 mm|
|**Sensing distance**|≤ 25 mm|
|**Sensing distance tolerance**|± 6 mm|
|**Housing design**|Middle|
|**Light source**|LED, RGB1)|
|**Wave length**|470 nm, 525 nm, 625 nm|
|**Light emission**|Long side of housing|
|**Light spot size**|1.2 mm x 5.3 mm|
|**Light spot direction**|Vertical2)|
|**Receiving filters**|None|
|**Teach-in mode**|1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode|
|**Output function**|Light/dark switching|
|**Delay time**|Adjustable|
|**Special features**|-|
|**Delivery status**|2-point teach-in|
|**Parameter presettings**|None|
|**Setting the key lock**|Standard|



- 1) Average service life: 100,000 h at TU = +25 °C. 

2) In relation to long side of housing. 

**Product data sheet | 2024-04-15 09:25:50 Subject to change without notice** 

**2** 

**CONTRAST SENSORS | SICK** 

**KTS-WB91241152ZZZZ | KTS** CONTRAST SENSORS 

## Mechanics/electronics 

|**Supply voltage**|10.8 V DC ... 28.8 V DC1)|
|---|---|
|**Ripple**|≤ 5 Vpp 2)|
|**Current consumption**|< 100 mA3)|
|**Switching frequency**|50 kHz4) 5)|
|**Response time**|10 µs6) 7)|
|**Jitter**|5 µs8)|
|**Switching output**|Push-pull: PNP/NPN|
|**Switching output (voltage)**|Push-pull: PNP/NPN HIGH = UV- 3 V/LOW ≤ 3 V|
|**Output current Imax.**|100 mA9)|
|**Input, teach-in (ET)**|Teach: U = 10 V ... < VS|
|**Input, blanking input (AT)**|Blanked: U = 10 V ... < Uv|
|**Input, fine/coarse (F/C)**|Coarse: U = 10 V ... < Uv|
|**Input, light/dark (L/D)**|Light: U = 10 V ... < Uv|
|**Retention time (ET)**|25 ms, non-volatile memory|
|**Connection type**|Male connector M12, 5-pin|
|**Protection class**|III|
|**Circuit protection**|UVconnections, reverse polarity protected<br>Output Q short-circuit protected<br>Interference pulse suppression|
|**Enclosure rating**|IP67|
|**Weight**|68 g|
|**Housing material**|Plastic, VISTAL®|
|**Optics material**|Plastic, COP|



- 1) Limit values: DC 12 V (–10 %) ... DC 24 V (+20 %). Operation in short-circuit protected network max. 8 A. 

- 2) May not exceed or fall below Uv tolerances. 

- 3) Without load. 

- 4) With light/dark ratio 1:1. 

- 5) 1-point teach-in (color mode): 16 kHz. 

- 6) Signal transit time with resistive load. 

- 7) 1-point teach-in (color mode): 30 µs. 

- 8) 1-point teach-in (color mode): 15 µs. 

- 9) Total current of all Outputs. 

## Ambient data 

|**Ambient operating temperature**|–20 °C ... +60 °C|
|---|---|
|**Ambient temperature, storage**|–25 °C ... +75 °C|
|**Shock load**|According to IEC 60068-2-27 (30 g/11 ms)|
|**UL File No.**|E181493|



## Classifications 

|**ECLASS 5.0**|27270906|
|---|---|
|**ECLASS 5.1.4**|27270906|
|**ECLASS 6.0**|27270906|
|**ECLASS 6.2**|27270906|



**2024-04-15 09:25:50 | Product data sheet Subject to change without notice** 

**CONTRAST SENSORS | SICK** 

**3** 

**KTS-WB91241152ZZZZ | KTS** CONTRAST SENSORS 

|**ECLASS 7.0**|27270906|
|---|---|
|**ECLASS 8.0**|27270906|
|**ECLASS 8.1**|27270906|
|**ECLASS 9.0**|27270906|
|**ECLASS 10.0**|27270906|
|**ECLASS 11.0**|27270906|
|**ECLASS 12.0**|27270906|
|**ETIM 5.0**|EC001820|
|**ETIM 6.0**|EC001820|
|**ETIM 7.0**|EC001820|
|**ETIM 8.0**|EC001820|
|**UNSPSC 16.0901**|39121528|



Dimensional drawing (Dimensions in mm (inch)) 

**==> picture [287 x 235] intentionally omitted <==**

**----- Start of picture text -----**<br>
47.5 (1.87)<br>43.3 (1.7)<br>26 (1.02) 32 (1.26)<br>i ce<br>SY<br>© <l|<br>5.5 (0.22)<br>9 (0.35)<br>a<br>4.1<br> (0.16)<br> (0.59)  (0.17)<br>15 4.2<br>)<br>2.11( 2.44)(<br>62<br>53.6<br>4)<br>(05.<br>13.6<br>**----- End of picture text -----**<br>


① Optical axis 

- ② Fixing hole 

- ③ M12 male connector, delivery state 

- ④ M12 male connector, end stop right 

- ⑤ M12 male connector, end stop left 

- ⑥ Display and adjustment elements 

**4** 

**Product data sheet | 2024-04-15 09:25:50 Subject to change without notice** 

**CONTRAST SENSORS | SICK** 

**KTS-WB91241152ZZZZ | KTS** CONTRAST SENSORS 

## Adjustments 

Display and adjustment elements 

**==> picture [129 x 128] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 2 1<br>TCH<br>PWR<br>Q O 0 EE§ THR<br> QIN 6 PRO<br>ESC a)<br>3<br>①   LED status indicator<br>**----- End of picture text -----**<br>


② Display 

③ Navigation buttons 

## Connection diagram 

Cd-382 

BN 1 +(L+) ~~—-~~ WH 2 ~~ae~~ Q/IN1 ~~1~~ BU 3 -(M) BK ~~I~~ 4 ~~—~~ Q GY 5 ~~—<+—_t-~~ IN2 

## Concept of operation 

KTS/KTX Prime - setting the switching threshold (2-point teach-in) 

Suitable for manual positioning of the object to be detected, e.g. marks and background. 

**1. Position mark** 

**2. Position background** 

When setting the contrasts to be detected, “1st” flashes. Press set button. 

When setting the contrasts to be detected, “2nd” flashes. Press set button. The Quality of Teach is displayed. 

**2024-04-15 09:25:50 | Product data sheet Subject to change without notice** 

**CONTRAST SENSORS | SICK** 

**5** 

**KTS-WB91241152ZZZZ | KTS** CONTRAST SENSORS 

KTS/KTX Prime - Setting the switching threshold (teach-in dynamic) 

Suitable for teaching in moving objects. 

## **1. Position background 2. Move at least the mark** 

**and background using the light spot** 

Press the Set pushbutton The display lights up during repeat Press the Set pushbutton to end to start the teach-in process. length detection ( - - - ). the teach-in process. The Quality of Teach is displayed. 

**==> picture [338 x 99] intentionally omitted <==**

**----- Start of picture text -----**<br>
Example<br>Dark switching Light switching<br>Internal signal<br>received<br>Switching Switching<br>threshold threshold<br>Internal signal<br>received<br>Output Q SLO Output Q a | 9<br>**----- End of picture text -----**<br>


## **Switching characteristics** 

The optimum emitted light is selected automatically (at RGB variants). Static teach-in: light/dark setting is defined using teach-in sequence. Dynamic teach-in: switching output active on mark, if background is longer in the field of view during the teach-in. The switching threshold is set in the center between the background and the mark. 

Keylock (activation and deactivation): Press and hold the “+” pushbutton > 10 s. 

The Q-LED (yellow) flashes and the “Err” error message appears on the display. 

**6** 

**Product data sheet | 2024-04-15 09:25:50 Subject to change without notice** 

**CONTRAST SENSORS | SICK** 

**KTS-WB91241152ZZZZ | KTS** CONTRAST SENSORS 

## Sensing distance 

Sensing distance 25 mm, light spot direction horizontal/vertical 

**==> picture [199 x 212] intentionally omitted <==**

**----- Start of picture text -----**<br>
Sensitivity in %<br>110<br>100 ee<br>90<br>| | |AN<br>80<br>| ft Pet [tN]<br>70 ee<br>60 ee<br>50 | | | | |<br>40<br>- | | | | | |<br>30<br>- | | | | | |<br>20<br>- | | | | | |<br>10<br>_ | | | | | |<br>0 ft tT tt tt<br>0 5 10 15 20 25 30 35<br>(0.2) (0.39) (0.59) (0.79) (0.98) (1.18) (1.38)<br>Distance in mm (inch)<br>**----- End of picture text -----**<br>


## Recommended accessories 

Other models and accessories www.sick.com/KTS 

**Brief description Type Part no.** a ~~ee~~ Universal bar clamp systems Plate K for universal clamp bracket, steel, zinc coated, Universal clamp (2022726), BEF-KHS-K01 2022718 mounting hardware ~~a ee,~~ Mounting bar, straight, 200 mm, steel, steel, zinc coated, without mounting hardware BEF-MS12G-A 4056054 ~~\ .©©6©6r ae +x»&»~~ Mounting bar, L-shaped, 150 mm x 150 mm, steel, steel, zinc coated, without mounting BEF-MS12L-A 4056052 hardware ~~:ex2~~ Plug connectors and cables ~~eee~~ • **Connection type head A:** Female connector, M12, 5-pin, straight, A-coded YF2A152096240 • **Connection type head B:** Flying leads 050VB5XLEAX • **Signal type:** Sensor/actuator cable • **Cable:** 5 m, 5-wire, PVC • **Description:** Sensor/actuator cable, unshielded • **Application:** Zones with chemicals • **Connection type head A:** Male connector, M12, 5-pin, straight STE-1205-G 6022083 • **Description:** Unshielded, Head A: male connector, M12, 5-pin, straight, unshielded, for cable diameter 4 mm ... 6 mm Head B: - • **Connection systems:** Screw-type terminals • **Permitted cross-section:** ≤ 0.75 mm² • **Note:** For field bus technology 

**2024-04-15 09:25:50 | Product data sheet Subject to change without notice** 

**CONTRAST SENSORS | SICK** 

**7** 

## SICK At A GlAnCe 

SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applications. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. 

We have extensive experience in a wide range of industries and understand their processes and requirements. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. 

Comprehensive services complete our offering: SICK lifetime Services provide support throughout the machine life cycle and ensure safety and productivity. 

For us, that is “Sensor Intelligence.” 

## WOrldWIde preSenCe: 

Contacts and other locations www.sick.com 

SICK AG | Waldkirch | Germany | www.sick.com