KTS-WB41141142ZZZZ

KTS-WB41141142ZZZZ KTS 

**CONTRAST SENSORS** 

**KTS-WB41141142ZZZZ | KTS** CONTRAST SENSORS 

## Ordering information 

|**Type**|**part no.**|
|---|---|
|KTS-WB41141142ZZZZ|1218200|
|Other models and accessories<br> www.sick.com/KTS||



**==> picture [63 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
Illustration may differ<br>**----- End of picture text -----**<br>


**==> picture [87 x 52] intentionally omitted <==**

**----- Start of picture text -----**<br>
C € ¢(U)us<br>LS @ CEcA<br>**----- End of picture text -----**<br>


Detailed technical data Features 

|**Parameter presettings**||None|
|---|---|---|
|**Special applications**||Standard|
|**Device type**||Easy Teach|
|**Housing design**||Middle|
|**Dimensions (W x H x D)**||26 mm x 62 mm x 47.5 mm|
|**Light source**||LED, RGB1)|
|**Light emission**||Long side of housing|
|**Light spot size**||1.2 mm x 3.9 mm|
|**Light spot direction**||Vertical2)|
|**Receiving filters**||None|
|**Wave length**||470 nm, 525 nm, 625 nm|
|**Sensing distance**||≤ 13 mm|
|**Sensing distance tolerance**||± 3 mm|
|**Teach-in mode**||2-point teach-in|
|**Output function**||Light/dark switching|
|**Delay time**||-|
|**Setting the key lock**||Standard|
|**Delivery status**||2-point teach-in|
|**Safety-related parameters**|||
||MTTFD|291 years|



1) Average service life: 100,000 h at TU = +25 °C. 

2) In relation to long side of housing. 

**Data sheet | 2026-03-24 23:34:06 Subject to change without notice** 

**2** 

**CONTRAST SENSORS | SICK** 

**KTS-WB41141142ZZZZ | KTS** CONTRAST SENSORS 

## Electronics 

|**Supply voltage**|10.8 V DC ... 28.8 V DC1)|
|---|---|
|**Ripple**|≤ 5 Vpp 2)|
|**Current consumption**|< 100 mA3)|
|**Switching frequency**|25 kHz4)|
|**Response time**|20 µs|
|**Jitter**|10 µs|
|**Switching output**|Push-pull: PNP/NPN|
|**Switching output (voltage)**|Push-pull: PNP/NPN HIGH = UV- 3 V/LOW ≤ 3 V|
|**Output current Imax.**|100 mA5)|
|**Input, teach-in (ET)**|Teach: U = 10 V ... < VS|
|**Retention time (ET)**|35 ms, non-volatile memory|
|**Time delay**|None|
|**Protection class**|III|
|**Circuit protection**|UVconnections, reverse polarity protected<br>Output Q short-circuit protected<br>Interference pulse suppression|
|**Connection type**||
||Male connector M12, 4-pin|



1) Limit values: DC 12 V (–10 %) ... DC 24 V (+20 %). Operation in short-circuit protected network max. 8 A. 

- 2) May not fall below or exceed UV tolerances. 

- 3) Without load. 

- 4) With light/dark ratio 1:1. 

- 5) Total current of all Outputs. 

## Mechanics 

|**Housing material**|VISTAL®|
|---|---|
|**Optics material**|COP|
|**Weight**|68 g|
|Ambient data||
|**Ambient operating temperature**|–20 °C ... +60 °C|
|**Ambient temperature, storage**|–25 °C ... +75 °C|
|**Shock load**|According to IEC 60068-2-27 (30 g/11 ms)|
|**Enclosure rating**|IP67|
|**UL File No.**|E181493|



## Certificates 

|**EU declaration of conformity**|✔|
|---|---|
|**UK declaration of conformity**|✔|
|**ACMA declaration of conformity**|✔|
|**Moroccan declaration of conformity**|✔|
|**China RoHS**|✔|
|**cULus certificate**|✔|



**2026-03-24 23:34:06 | Data sheet Subject to change without notice** 

**CONTRAST SENSORS | SICK** 

**3** 

**KTS-WB41141142ZZZZ | KTS** CONTRAST SENSORS 

**Photobiological safety (IEC EN 62471)** ✔ 

## Classifications 

|**ECLASS 5.0**|27270906|
|---|---|
|**ECLASS 5.1.4**|27270906|
|**ECLASS 6.0**|27270906|
|**ECLASS 6.2**|27270906|
|**ECLASS 7.0**|27270906|
|**ECLASS 8.0**|27270906|
|**ECLASS 8.1**|27270906|
|**ECLASS 9.0**|27270906|
|**ECLASS 10.0**|27270906|
|**ECLASS 11.0**|27270906|
|**ECLASS 12.0**|27270906|
|**ETIM 5.0**|EC001820|
|**ETIM 6.0**|EC001820|
|**ETIM 7.0**|EC001820|
|**ETIM 8.0**|EC001820|
|**UNSPSC 16.0901**|39121528|



Dimensional drawing 

**==> picture [257 x 231] intentionally omitted <==**

**----- Start of picture text -----**<br>
47.5 (1.87)<br>43.3 (1.7)<br>26 (1.02) 32 (1.26)<br>:oP |~<br>EY = LING<br>a  Fl<br>5.5 (0.22)<br>9 (0.35)<br>4.1<br> (0.16)<br> (0.59)  (0.17)<br>15 4.2<br>)<br>2.11( 2.44)(<br>62<br>53.6<br>4)<br>(05.<br>13.6<br>**----- End of picture text -----**<br>


Dimensions in mm (inch) ① Optical axis 

- ② fixing hole 

③ M12 male connector, delivery state 

- ④ M12 male connector, end stop right 

⑤ M12 male connector, end stop left 

**4 CONTRAST SENSORS | SICK** 

**Data sheet | 2026-03-24 23:34:06 Subject to change without notice** 

**KTS-WB41141142ZZZZ | KTS** CONTRAST SENSORS 

## ⑥ display and adjustment elements 

## display and adjustment elements 

**==> picture [118 x 127] intentionally omitted <==**

**----- Start of picture text -----**<br>
1<br>LOCK<br>>10s<br>PWR Q<br>2 3<br>①  Bar graph<br>②  single teach-in button<br>**----- End of picture text -----**<br>


③ LED status indicator 

## Connection diagram Cd-380 

**==> picture [76 x 58] intentionally omitted <==**

**----- Start of picture text -----**<br>
BN 1<br>+ (L+)<br>WH 2<br>Teach (ET)<br>BU 3<br>-  (M)<br>BK 4<br>Q<br>**----- End of picture text -----**<br>


**2026-03-24 23:34:06 | Data sheet Subject to change without notice** 

**CONTRAST SENSORS | SICK** 

**5** 

**KTS-WB41141142ZZZZ | KTS** CONTRAST SENSORS 

## KTS Core Easy Teach - Setting the switching threshold 

Suitable for manual positioning of the object to be detected, e.g. marks and background. 

**1. Position mark 2. Position background** ~~or~~ When setting the contrasts to be When setting the contrasts to be detected, the first LED (green) detected, the second LED (green) flashes in the bar graph. flashes in the bar graph. Press Teach-in pushbutton. Press Teach-in pushbutton. 

**==> picture [338 x 101] intentionally omitted <==**

**----- Start of picture text -----**<br>
Example<br>Dark switching Light switching<br>Internal signal<br>received<br>Switching  Switching<br>threshold threshold<br>Internal signal<br>received<br>Output Q FFE Output Q<br>**----- End of picture text -----**<br>


## **Switching characteristics** 

The optimum emitted light is selected automatically (at RGB variants). Static teach-in: light/dark setting is defined using teach-in sequence. 

Keylock (activation and deactivation): Press and hold the Teach-in pushbutton > 10 s. 

Teach-in failure: The Q-LED (yellow) flashes and all LEDs flash on the bar graph (green). 

**6** 

**Data sheet | 2026-03-24 23:34:06 Subject to change without notice** 

**CONTRAST SENSORS | SICK** 

**KTS-WB41141142ZZZZ | KTS** CONTRAST SENSORS 

KTS Core - setting the switching threshold (2-point teach-in) 

Suitable for manual positioning of the object to be detected, e.g. marks and background. 

## **1. Position mark 2. Position background** 

When setting the contrasts to be When setting the contrasts to be detected, the first LED (green) detected, the second LED (green) flashes in the bar graph. flashes in the bar graph. Press set button. Press set button. The Quality of Teach is displayed. 

## Sensing distance 

**==> picture [199 x 208] intentionally omitted <==**

**----- Start of picture text -----**<br>
Sensitivity in %<br>110<br>100<br>pT Tt<br>90<br>pit | ATN<br>80<br>pi | Fe tT NG<br>70<br>pit iT tT TP TS<br>60<br>pi | ft<br>50<br>pi tt eT<br>40<br>pi tt ET<br>30<br>pi tt ET<br>20 pitt<br>10 pitt<br>0 pit ot ET<br>0 4 8 12 16 20<br>(0.16) (0.31) (0.47) (0.63) (0.79)<br>Distance in mm (inch)<br>**----- End of picture text -----**<br>


**2026-03-24 23:34:06 | Data sheet Subject to change without notice** 

**CONTRAST SENSORS | SICK** 

**7** 

**KTS-WB41141142ZZZZ | KTS** CONTRAST SENSORS 

## Recommended accessories 

Other models and accessories www.sick.com/KTS 

- **Brief description Type part no.** 

- Mounting systems • **Description:** Plate K for universal clamp bracket BEF-KHS-K01 2022718 • **Material:** Steel • **Details:** Steel, zinc coated • **Items supplied:** Universal clamp (2022726), mounting hardware • **Usable for:** W11-2, W12-3, W14-2, W18-3, W23-2, W24-2, W27-3, W30, W32, W34, W36, PL50A, PL80A, P250, UC12, LUT3, KT2, KT5-2, KT8, CS8, DT2, DS30, DS40, W12-2 Laser, W16, W26, KT5 

- ~~1~~ connectors and cables • **Description:** Sensor/actuator cable, unshielded YF2A14-050VB3XLEAX 2096235 • **Connection type head A:** Female connector, M12, 4-pin, straight, A-coded • **Connection type head B:** Flying leads • **Signal type:** Sensor/actuator cable • **Cable:** 5 m, 4-wire, PVC • **Application:** Uncontaminated zones, Zones with chemicals 

- ~~>~~ • **Description:** Unshielded STE-1204-G 6009932 • **Connection type head A:** Male connector, M12, 4-pin, straight, A-coded • **Connection systems:** Screw-type terminals • **Permitted cross-section:** ≤ 0.75 mm² 

- ~~.Te~~ 

**Data sheet | 2026-03-24 23:34:06 Subject to change without notice** 

**8 CONTRAST SENSORS | SICK** 

## SICK At A GlAnCe 

SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applications. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. 

We have extensive experience in a wide range of industries and understand their processes and requirements. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. 

Comprehensive services complete our offering: SICK lifetime Services provide support throughout the machine life cycle and ensure safety and productivity. 

For us, that is “Sensor Intelligence.” 

## WOrldWIde preSenCe: 

Contacts and other locations www.sick.com 

SICK AG | Waldkirch | Germany | www.sick.com