KPEG650SAN

: 

**==> picture [432 x 262] intentionally omitted <==**

**----- Start of picture text -----**<br>
SPECIFICATION FOR APPROVAL<br>AK ae ==<br>Description : Piezo Audio Indicator<br>Kingstate Part No. : KPEG650SAN<br>Customer’s Model No. _ : |<br>Specification No. : PKD-7557<br>Number Of The Edition: 1.1<br>**----- End of picture text -----**<br>


**==> picture [274 x 13] intentionally omitted <==**

**----- Start of picture text -----**<br>
CUSTOMER’S APPROVED SIGNATURE<br>**----- End of picture text -----**<br>


**==> picture [432 x 168] intentionally omitted <==**

**----- Start of picture text -----**<br>
ERBFHEYGPAIDS<br>ss FE] KINGSTATE ELECTRONICS CORP.<br>Address :10F, No, 69-11, Sec. 2, Chung Chang E. Rd., Tamshui County, Taipei Hsien, Taiwan, R.O.C.<br>EE, = internationalsales dept:TEL:886-2-2809-.5651 FAX:886-2-2800-7151<br>Dornestic sales dept.: TEL:886-2-2809-0668  FAX:886-2-28096748<br>_-__hitpzwwwkingstate,com.tw<br>AY 1/5] ie a f dong |<br>**----- End of picture text -----**<br>


## **A. SCOPE** 範疇 

## This specification applies piezo audio indicator, **KPEG650SAN** 此規格書適用於壓電式蜂鳴器, **KPEG650SAN** 

## **B. SPECIFICATION** 規格 

|**No.**|<br>**Item**|**Unit**|**Specification**|**Condition**|
|---|---|---|---|---|
|1|Resonant frequency<br>共振頻率|KHz|2.8 ± 0.5||
|2|Operating Volt. range<br>操作電壓範圍|AC/DC|4 ~ 28||
|3|Current consumption<br>消耗電流|mA|MAX 7|at 12VDC|
|4|Sound pressure level<br>輸出音壓|dB|MIN 81|at 30cm/12VDC|
|5|Rated Voltage<br>額定電壓|VDC|12||
|6|Tone<br>聲音||Continuous<br>直音|at 12VDC|
|7|Operating temp.<br>操作溫度|℃|-30 ~ +85||
|8|Storage temp.<br>儲存溫度|℃|-40 ~ +85||
|9|Dimension<br>尺寸|mm|φ42.5 x H33.0|See appearance drawing<br>請參照外觀尺寸圖|
|10|Weight (MAX)<br>重量|gram|33.8||
|11|Material<br>材質||ABS UL-94 1/16” HB High Heat<br>（BLACK）||
|12|Terminal<br>端子||Tin-Plated Tapped Screw<br>(鍍全錫/PlatingSn)|See appearance drawing<br>請參照外觀尺寸圖|
|13|Environmental<br>Protection Regulation<br>環保法規||RoHS||
|14|Storage life<br>保存期限|month|6<br>在|6 months preservation at room temp.<br>(25±3℃), Humidity40%<br>室溫下25±3℃,濕度40%以下可保存6個月.|



## **C. APPEARANCE DRAWING** 外觀尺寸圖 

**==> picture [139 x 104] intentionally omitted <==**

**==> picture [262 x 139] intentionally omitted <==**

**----- Start of picture text -----**<br>
CONSTANT TONE<br>AC/DC NONPOLAR<br>KINGSTATE<br>KPEG650SAN<br>**----- End of picture text -----**<br>


**Tol : ± 0.5 Unit:mm** 

志豐電子股份有限公司 **KINGSTATE ELECTRONICS CORP 2/5 KPEG650SAN** 

## **D. MEASURING METHOD** 測量方法 

## S.P.L. Measuring Circuit 音壓測試接線圖 

**==> picture [489 x 174] intentionally omitted <==**

Mic : RION S.P.L meter UC30 or equivalent Mic：RION 噪音計 UC30 或同等品 

## **F. MECHANICAL CHARACTERISTICS** 機械特性 

|**No.**|**Item**|**Test condition**|**Evaluation standard**|
|---|---|---|---|
|1|Solderability<br>焊錫附著性|Lead terminals are immersed in rosin for 5 seconds and then immersed in<br>solder bath of +270±5℃for 3±1 seconds.<br>端子部份浸入松香溶液5秒後,再浸入+270±5℃溶融焊鍚槽中3±1秒.|90% min. lead terminals<br>shall be wet with solder.<br>(Except the edge of<br>terminal)<br>浸入端子部份附著焊鍚90%<br>以上.(末端斷面不算)|
|2|Soldering Heat<br>Resistance<br>焊錫耐熱性|Lead terminal are immersed up to 1.5mm from sounder’s body in soilder<br>bath of +300±5℃for 3± 0.5 seconds or +260±5℃for 10±1 seconds.<br>距離端子根部1.5mm的位置,浸入+300±5℃的焊鍚槽3±0.5秒,或+260±5℃<br>的焊錫槽10±1 秒.|No interference in operation<br>操作上無任何不良|
|3|Terminal Mechanical<br>Strength<br>端子強度|The force 10 seconds of 9.8N (1.0kg) is applied to each terminal in axial<br>direction.<br>各端子的軸方向施以9.8N (1.0kg)的力量10秒.|No damage and cutting off<br>端子不鬆動,不脫落|
|4|Vibration<br>振動測試|Buzzer shall be measured after being applied vibration of amplitude of<br>1.5mm with 10 to 55hz band of vibration frequency to each of 3<br>per-pendicular directions for 2 hours.<br>振動週波數10∼55HZ、全振幅1.5mm於X.Y.Z 3個方向,各2小時.|The value of oscillation<br>frequency/ current<br>consumption should be in<br>10% compared with initial<br>ones .The SPL should be in<br>± 10dB compared with initial<br>one.<br>諧振頻率與消耗電流變化量<br>須在±10%內.輸出音壓變化<br>量須在±10dB內.|
|5|Drop test<br>落下測試|The part only shall be dropped from a height of 75cm onto a 40mm thick<br>wooden board 3 times in 3 axes (X.Y.Z). (a total of 9 times).<br>單體從75公分高處, X.Y.Z.3個方向,各3回,落於40mm厚木板上.||



志豐電子股份有限公司 **KINGSTATE ELECTRONICS CORP 3/5 KPEG650SAN** 

## **F. ENVIRONMENT TEST** 環境測試 

**No. Item Test Condition Evaluation standard** High temp. test After being placed in a chamber at +85℃ for 240 hours 1 高溫測試 置於+85℃環境中 240 小時 Low temp. test After being placed in a chamber at –40℃ for 240 hours 2 低溫測試 置於-40℃環境中 240 小時 After being placed in a chamber at +40℃ and 90±5% relative humidity Humidity test 3 for 240 hours 相對濕度測試 Being placed for 4 hours at 置於+40℃, 相對濕度 90±5% 環境中 240 小時 +25℃, buzzer shall be The part shall be subjected to 5 cycles. One cycle shall be consist of:: measured. The value of 單體承受溫度循環測試 5 次,其循環內容如圖示: oscillation frequency/ current consumption should be in ±10% +85℃ compared with initial ones .The SPL should be in ±10dB compared with initial one. +25℃                      +25℃ 經測試後, 靜置於+25℃（室溫） 4 Temp. cycle test 溫度循環試驗 -40℃ 環境中電流變化量須在4 小時後±10%,諧振頻率與消耗內. 輸出音 壓變化量須在±10dB 內. 0.5hr  0.5hr  0.25   0.5hr  0.5hr   0.5hr  0.25 3hours **G. RELIABILITY TEST** 信賴性測試 **No. Item Test condition Evaluation standard** Being placed for 4 hours at +25℃, buzzer shall be 1.Continuous life test 高溫壽命測試(連續) measured. The value of 48 hours continuous operation at +70℃ with rated voltage applied. oscillation frequency/ current 在+70℃環境下,以額定電壓連續操作48 小時 consumption should be in ±10% Operating life 2.Intermittent life test 室溫壽命測試(間歇) compared with initial ones .The 1 test SPL should be in ±10dB 壽命測試 A duty cycle of 1 minute on, 1 minutes off, a minimum of 5000 times at room compared with initial one. temp.( +25±2℃)and rated voltage applied 在室溫下(+25±2℃), 以額定電壓操作, 通電1 分鐘/斷電1 分鐘,測試 經測試後, 靜置於+25℃（室溫） 5000 次循環. 環境中 4 小時後,諧振頻率與消耗 電流變化量須在±10%內. 輸出音 壓變化量須在±10dB 內. **TEST CONDITION.** Standard Test Condition : a) Temperature : +5 ~ +35℃  b) Humidity : 45-85% c) Pressure : 860-1060mbar 一般測試條件 : a) 溫度 : +5 ~ +35℃        b) 濕度 : 45-85% c) 氣壓 : 860-1060mbar Judgement Test Condition : a) Temperature : +25 ± 2℃   b) Humidity : 60-70% c) Pressure : 860-1060mbar 爭議時測試條件 : a) 溫度 : +25 ± 2℃         b) 濕度 : 60-70% c) 氣壓 : 860-1060mbar 

## **TEST CONDITION.** 

志豐電子股份有限公司 **KINGSTATE ELECTRONICS CORP 4/5 KPEG650SAN** 

## **H. PACKING STANDARD** 包裝規格 

志豐電子股份有限公司 **KINGSTATE ELECTRONICS CORP 5/5 KPEG650SAN**