KPEG222

**==> picture [455 x 259] intentionally omitted <==**

**----- Start of picture text -----**<br>
SPECIFICATION FOR APPROVAL<br>.<br>><br>x 2 j=<br>Description Piezo Audio Indicator<br>Kingstate Part No. KPEG222<br>Customer’s Model No. :<br>Specification No. : PKD-7367<br>Number Of The Edition : 1.1<br>**----- End of picture text -----**<br>


| 

## CUSTOMER’S APPROVED SIGNATURE 

68 E+84H Ma] KINGSTATE ELECTRONICS CORP. _ Address: 10F, No. 69-11, Sec. 2, Chung Cheng E. Rd., Tamshui County, Taipei Hsien, Taiwan, R.O.C. a International sales dept.: TEL:886-2-2809-5651 FAX:886-2-2809-7151 Domestic sales dept: TEL:686-2-2809-0668 FAX:886-2-28096748 httov/Avww, kingstate.com.tw _ A ae TIAN 

## **A. SCOPE** 範疇 

This specification applies piezo audio indicator, **KPEG222** 此規格書適用於壓電式蜂鳴器, **KPEG222** 

## **B. SPECIFICATION** 規格 

|**No.**|<br>**Item**|**Unit**|**Specification**|**Condition**|
|---|---|---|---|---|
|1|Resonant frequency<br>|KHz|||
||||3.2 ± 0.5||
||共振頻率||||
||||||
|2|Operating Volt. range<br>操作電壓範圍|VDC|3 ~ 20||
|3|Current consumption<br>|mA|MAX 13|at 12VDC|
||消耗電流||||
|4|Sound pressure level<br>輸出音壓|dB|MIN 75|at 30cm/12VDC|
|5|Rated Voltage<br>額定電壓|VDC|12||
|6|Tone<br>聲音||Continuous<br>直音||
|7|Operating temp.<br>操作溫度|℃|-30 ~ +85||
|8|Storage temp.<br>儲存溫度|℃|-40 ~ +95||
|9|Dimension<br>尺寸|mm|φ23.3 x H10.2|See appearance drawing<br>請參照外觀尺寸圖|
|10|Weight (MAX)<br>重量|gram|5.0||
|11|Material<br>材質||ABS UL-94 1/16” HB HIGH HEAT<br>（BLACK）||
|12|Terminal<br>端子||Pin type<br>(鍍全錫PlatingSn)|See appearance drawing<br>請參照外觀尺寸圖|
|13|Environmental<br>ProtectionRegulation<br>環保法規||RoHS||
|14|<br>Storage life<br>保存期限|month|6|6 months preservation at room temp.(25±3℃),<br>Humidity40%<br>在室溫下25±3℃,濕度40%以下可保存6 個月.|



## **C. APPEARANCE DRAWING** 外觀尺寸圖 

**==> picture [132 x 88] intentionally omitted <==**

**==> picture [79 x 87] intentionally omitted <==**

**==> picture [168 x 54] intentionally omitted <==**

**Tol : ± 0.5** 

**Unit : mm** 

志豐電子股份有限公司 **KINGSTATE ELECTRONICS CORP 2/6 KPEG222** 

## **D. MEASURING METHOD** 測量方法 

## S.P.L. Measuring Circuit 音壓測試接線圖 

Mic : RION S.P.L meter UC30 or equivalent Mic：RION 噪音計 UC30 或同等品 

## **E. VOLTAGE: SOUND PRESSURE LEVEL / VOLTAGE: CURRENT CONSUMPTION CHARACTERISTICS /** 電壓與音壓 電壓與耗電流之特性 

**==> picture [530 x 288] intentionally omitted <==**

**----- Start of picture text -----**<br>
at 30cm<br>110<br>105<br>100<br>95<br>90<br>P<br>85<br>80<br>75 25<br>70 20<br>15<br>I<br>10<br>5<br>0<br>3 6 9 12 15 18 20<br> Voltage(VDC)<br>Sound Pressure Level(dB)<br>Current Consumption(mA)<br>**----- End of picture text -----**<br>


志豐電子股份有限公司 **KINGSTATE ELECTRONICS CORP 3/6 KPEG222** 

## **F. MECHANICAL CHARACTERISTICS** 機械特性 

|**No.**|**Item**|**Test Condition**|**Evaluation standard**|
|---|---|---|---|
|1|Solderability<br>焊錫附著性|Lead terminals are immersed in rosin for 5 seconds and then immersed in<br>solder bath of +270±5℃for 3±1 seconds.<br>端子部份浸入松香溶液5秒後,再浸入+270±5℃溶融焊鍚槽中3±1秒.|90% min. lead terminals shall<br>be wet with solder. (Except<br>the edge of terminal)<br>浸入端子部份附著焊鍚90%<br>以上.(末端斷面不算)|
|2|Soldering Heat<br>Resistance<br>焊錫耐熱性|Lead terminal are immersed up to 1.5mm from sounder’s body in soilder<br>bath of +300±5℃for 3± 0.5 seconds or +260±5℃for 10±1 seconds.<br>距離端子根部1.5mm的位置,浸入+300±5℃的焊鍚槽3±0.5秒,或+260±5℃<br>的焊錫槽10±1 秒.|No interference in operation<br>操作上無任何不良|
|3|Terminal Mechanical<br>Strength<br>端子強度|The force 10 seconds of 9.8N (1.0kg) is applied to each terminal in axial<br>direction.<br>各端子的軸方向施以9.8N (1.0kg)的力量10秒.|No damage and cutting off<br>端子不鬆動,不脫落|
|4|Vibration<br>振動測試|Buzzer shall be measured after being applied vibration of amplitude of<br>1.5mm with 10 to 55hz band of vibration frequency to each of 3<br>per-pendicular directions for 2 hours.<br>振動週波數10∼55HZ、全振幅1.5mm於X.Y.Z 3個方向,各2小時.|The value of oscillation<br>frequency/ current<br>consumption should be in<br>10% compared with initial<br>ones .The SPL should be in ±<br>10dB compared with initial<br>one.<br>諧振頻率與消耗電流變化量須<br>在±10%內.輸出音壓變化量<br>須在±10dB內.|
|5|Drop test<br>落下測試|The part only shall be dropped from a height of 75cm onto a 40mm thick<br>wooden board 3 times in 3 axes (X.Y.Z). (a total of 9 times).<br>單體從75公分高處, X.Y.Z.3個方向,各3回,落於40mm厚木板上.||



## **G. ENVIRONMENT TEST** 環境測試 

|**No.**|**Item**|**Test Condition**<br>|**Evaluation standard**|
|---|---|---|---|
|1|High temp. test<br>高溫測試|After being placed in a chamber at +95℃for 240 hours<br>置於+95℃環境中240 小時<br>|<br>Being placed for 4 hours at<br>+25℃, buzzer shall be<br>measured. The value of<br>oscillation frequency/ current<br>consumption should be in±10%<br>compared with initial ones .The<br>SPL should be in±10dB<br>compared with initial one.<br>經測試後,靜置於+25℃（室溫）<br>環境中4小時後,諧振頻率與消耗<br>電流變化量須在±10%內.輸出音<br>壓變化量須在±10dB內.|
|2|Low temp. test<br>低溫測試|After being placed in a chamber at –40℃for 240 hours<br>置於-40℃環境中240 小時<br>||
|3|Humidity test<br>相對濕度測試|After being placed in a chamber at +40℃and 90±5% relative humidity<br>for 240 hours<br>置於+40℃, 相對濕度90±5%環境中240 小時<br>||
|4|Temp. cycle test<br>溫度循環試驗|The part shall be subjected to 5 cycles. One cycle shall be consist of：<br>單體承受溫度循環測試5次,其循環內容如圖示：<br>+95℃<br>+25℃+25℃<br>-40℃<br>0.5hr  0.5hr  0.25  0.5hr   0.5hr   0.5hr  0.25<br>3hours||



志豐電子股份有限公司 **KINGSTATE ELECTRONICS CORP 4/6 KPEG222** 

## **H. RELIABILITY TEST** 信賴性測試 

**No. Item Test condition Evaluation standard** Being placed for 4 hours at 1.Continuous life test 高溫壽命測試(連續) +25℃, buzzer shall be measured. The value of 48 hours continuous operation at +70℃ with rated voltage applied. oscillation frequency/ current 在+70℃環境下,以額定電壓連續操作 48 小時. consumption should be in ±10% Operating life 1 test 2.Intermittent life test 室溫壽命測試(間歇) compared with initial ones .The 壽命測試 A duty cycle of 1 minute on, 1 minutes off, a minimum of 5000 times at room SPL should be in ±10dB temp.( +25±2℃)and rated voltage applied. compared with initial one. 在室溫下(+25±2℃), 以額定電壓操作, 通電 1 分鐘/斷電 1 分鐘,測試 經測試後, 靜置於+25℃（室溫） 環境中 4 小時後,諧振頻率與消耗 5000 次循環. 電流變化量須在±10%內. 輸出音 壓變化量須在±10dB 內. 

## **TEST CONDITION.** 

- Standard Test Condition ： a) Temperature：+5 ~ +35℃  b) Humidity：45-85%  c) Pressure：860-1060mbar 一般測試條件 ：   a) 溫度：+5 ~ +35℃         b) 濕度：45-85% c) 氣壓：860-1060mbar 

- Judgement Test Condition ： a) Temperature：+25 ± 2℃   b) Humidity：60-70%  c) Pressure：860-1060mbar 爭議時測試條件 ： a) 溫度：+25 ± 2℃          b) 濕度：60-70% c) 氣壓：860-1060mbar 

## **I. PACKING STANDARD** 包裝規格 

志豐電子股份有限公司 **KINGSTATE ELECTRONICS CORP 5/6 KPEG222**