KPEG208

' 

**==> picture [443 x 262] intentionally omitted <==**

**----- Start of picture text -----**<br>
SPECIFICATION FOR APPROVAL<br>PK a =<br>f '<br>| ;<br>Description : Piezo Audio Indicator<br>~ Kingstate Part No. : KPEG208<br>|<br>Customer’s Model No. — :<br>Specification No. : PKD-7204<br>_ Number Of The Edition: 1.3<br>**----- End of picture text -----**<br>


**==> picture [2 x 1] intentionally omitted <==**

**----- Start of picture text -----**<br>
.<br>**----- End of picture text -----**<br>


## CUSTOMER’S APPROVED SIGNATURE 

' 

**==> picture [454 x 191] intentionally omitted <==**

**----- Start of picture text -----**<br>
. frewesrarea,| eaAddress:International 10F, sales No. dept: 69-11,SLAE TEL:886-2-2809-5651Sec. 2, ChungChengKINGSTATE E.FAX:886-2-2809-7151 Rd., Tamshui ELECTRONICS County, Taipei Hsien, Taiwan, R.O.C. CORP.<br>Domestic sales dept: TEL:886-2-2809-0668 FAX:886-2-28096748<br>_ http/Awww.kingstate.com.tw soe<br>[Approvedby| Checkedby | Issued by _|<br>'<br>A or F 4 VAJo) Fel<br>Re [|] 10v \\ oF 10/11/05’(08<br>**----- End of picture text -----**<br>


## **A. SCOPE** 範疇 

This specification applies piezo audio indicator, **KPEG208** 此規格書適用於壓電式蜂鳴器, **KPEG208** 

## **B. SPECIFICATION** 規格 

|**No.**|<br>**Item**|**Unit**|**Specification**|**Condition**|
|---|---|---|---|---|
|1|Resonant frequency<br>|KHz|||
||||4.0 ± 0.5||
||共振頻率||||
||||||
|2|Operating Volt. range<br>操作電壓範圍|VDC|3~ 20||
|3|Current consumption<br>|mA|MAX 14|at 12VDC|
||消耗電流||||
|4|Sound pressure level<br>輸出音壓|dB|MIN 83|at 30cm/12VDC|
|5|Rated Voltage<br>額定電壓|VDC|12||
|6|Tone<br>聲音||Continuous<br>直音||
|7|Operating temp.<br>操作溫度|℃|-30 ~ +85||
|8|Storage temp.<br>儲存溫度|℃|-40 ~ +95||
|9|Dimension<br>尺寸|mm|φ24.0 x H17.5|See appearance drawing<br>請參照外觀尺寸圖|
|10|Weight (MAX)<br>重量|gram|1.2||
|11|Material<br>材質||ABS UL-94 1/16” HB HIGH HEAT<br>(BLACK)||
|12|Terminal<br>端子||Pin type<br>(鍍化金/Plating Au )|See appearance drawing<br>請參照外觀尺寸圖|
|13|Environmental<br>Protection Regulation<br>環保法規||RoHS||



## **C. APPEARANCE DRAWING** 外觀尺寸圖 

**==> picture [382 x 198] intentionally omitted <==**

**Tol : ± 0.5 Unit : mm** 

志豐電子股份有限公司 **KINGSTATE ELECTRONICS CORP 2/5 KPEG208** 

## **D. MEASURING METHOD** 測量方法 

## S.P.L. Measuring Circuit 音壓測試接線圖 

Mic : RION S.P.L meter UC30 or equivalent Mic：RION 噪音計 UC30 或同等品 

## **E. VOLTAGE: SOUND PRESSURE LEVEL / VOLTAGE: CURRENT CONSUMPTION CHARACTERISTICS /** 電壓與音壓 電壓與耗電流之特性 

**==> picture [514 x 274] intentionally omitted <==**

**----- Start of picture text -----**<br>
at 30cm<br>110<br>105<br>P<br>100<br>95<br>90<br>85<br>80<br>75 25<br>70 20<br>15<br>I<br>10<br>5<br>0<br>3 6 9 12 15 18 20<br>Voltage(VDC)<br>Sound Pressure Level(dB)<br>Current Consumption(mA)<br>**----- End of picture text -----**<br>


志豐電子股份有限公司 **KINGSTATE ELECTRONICS CORP 3/5 KPEG208** 

## **F. MECHANICAL CHARACTERISTICS** 機械特性 

|**No.**|**Item**|**Test Condition**|**Evaluation standard**|
|---|---|---|---|
|1|Solderability<br>焊錫附著性|Lead terminals are immersed in rosin for 5 seconds and then immersed<br>in solder bath of +270±5℃for 3±1 seconds.<br>端子部份浸入松香溶液5秒後,再浸入+270±5℃溶融焊鍚槽中3±1秒.|90% min. lead terminals shall be<br>wet with solder. (Except the<br>edge of terminal)<br>浸入端子部份附著焊鍚90%以<br>上.(末端斷面不算)|
|2|Soldering Heat<br>Resistance<br>焊錫耐熱性|Lead terminal are immersed up to 1.5mm from sounder’s body in solder<br>bath of +300±5℃for 3± 0.5 seconds or +260±5℃for 10±1 seconds.<br>距離端子根部1.5mm的位置,浸入+300±5℃的焊鍚槽3±0.5秒,<br>或+260±5℃ 的焊錫槽10±1秒.|No interference in operation<br>操作上無任何不良.|
|3|Terminal Mechanical<br>Strength<br>端子強度|<br>The force 10 seconds of 9.8N (1.0kg) is applied to each terminal in axial<br>direction.<br>各端子的軸方向施以9.8N (1.0kg)的力量10秒.|No damage and cutting off<br>端子不鬆動,不脫落.|
|4|Vibration<br>振動試驗|Buzzer shall be measured after being applied vibration of amplitude of<br>1.5mm with 10 to 55hz band of vibration frequency to each of 3<br>per-pendicular directions for 2 hours.<br>振動週波數10∼55HZ、全振幅1.5mm 於X.Y.Z 3 個方向,各2 小時.|The value of oscillation<br>frequency/ current consumption<br>should be in 10% compared with<br>initial ones .The SPL should be<br>in ± 10dB compared with initial<br>one.<br>諧振頻率與消耗電流變化量須在<br>±10%內.輸出音壓變化量須在<br>±10dB 內.|
|5|Drop test<br>落下測試|The part only shall be dropped from a height of 75cm onto a 40mm thick<br>wooden board 3 times in 3 axes (X.Y.Z). (a total of 9 times).<br>單體從75公分高處, X.Y.Z.3個方向,各3回,落於40mm厚木板上.||



## **G. ENVIRONMENT TEST** 環境測試 

|**No.**|**Item**|**Test Condition**<br>|**Evaluation standard**|
|---|---|---|---|
|1|High temp. test<br>高溫測試|After being placed in a chamber at +95℃for 240 hours<br>置於+95℃環境中240 小時<br>|Being placed for 4 hours at<br>+25℃, buzzer shall be<br>measured. The value of<br>oscillation frequency/ current<br>consumption should be in±10%<br>compared with initial ones .The<br>SPL should be in±10dB<br>compared with initial one.<br>經測試後,靜置於+25℃（室溫）<br>環境中4小時後,諧振頻率與消耗<br>電流變化量須在±10%內.輸出音<br>壓變化量須在±10dB內.|
|2|Low temp. test<br>低溫測試|After being placed in a chamber at –40℃for 240 hours<br>置於-40℃環境中240 小時<br>||
|3|Humidity test<br>相對濕度測試|After being placed in a chamber at +40℃and 90±5% relative humidity<br>for 240 hours<br>置於+40℃, 相對濕度90±5%環境中240 小時<br>||
|4|Temp. cycle test<br>溫度循環試驗|The part shall be subjected to 5 cycles. One cycle shall be consist of：<br>單體承受溫度循環測試5次,其循環內容如圖示：<br>+95℃<br>+25℃+25℃<br>-40℃<br>0.5hr  0.5hr  0.25  0.5hr   0.5hr   0.5hr  0.25<br>3hours||



志豐電子股份有限公司 **KINGSTATE ELECTRONICS CORP 4/5 KPEG208** 

## **H. RELIABILITY TEST** 信賴性測試 

**==> picture [532 x 737] intentionally omitted <==**

**----- Start of picture text -----**<br>
No.  Item  Test condition  Evaluation standard<br>Being placed for 4 hours at<br>1.Continuous life test 高溫壽命測試(連續)  +25℃, buzzer shall be<br>measured. The value of<br>48 hours continuous operation at +70℃ with rated voltage applied.<br>oscillation frequency/ current<br>在+70℃環境下,以額定電壓連續操作48 小時.  consumption should be in ±10%<br>Operating life<br>1  test  2.Intermittent life test  室溫壽命測試(間歇)  compared with initial ones .The<br>壽命測試 A duty cycle of 1 minute on, 1 minutes off, a minimum of 5000 times at room  SPL should be in ±10dB<br>temp.( +25±2℃)and rated voltage applied.  compared with initial one.<br>在室溫下(+25±2℃),  以額定電壓操作,  通電1 分鐘/斷電1 分鐘,測試 經測試後,  靜置於+25℃（室溫）<br>環境中 4 小時後,諧振頻率與消耗<br>5000 次循環.  電流變化量須在±10%內.  輸出音<br>壓變化量須在±10dB 內.<br>TEST CONDITION.<br>Standard Test Condition  ： a) Temperature：+5 ~ +35℃  b) Humidity：45-85%  c) Pressure：860-1060mbar<br>一般測試條件 ：   a)  溫度：+5 ~ +35℃        b)  濕度：45-85%     c)  氣壓：860-1060mbar<br>Judgement Test Condition   ： a) Temperature：+25 ± 2℃   b) Humidity：60-70%  c) Pressure：860-1060mbar<br>爭議時測試條件 ： a)  溫度：+25 ± 2℃          b)  濕度：60-70%    c)  氣壓：860-1060mbar<br>I. PACKING STANDARD<br>包裝規格<br>12x5+11x5+10=125PCS<br>Out Box<br>(2LAYER =250PCS)<br>Out Box<br>Carton Box<br>(10PCS Out Box)<br>Out Box 310mmx248mmx49mm 2x125PCS=250PCS<br>Carton Box 550mmx330mmx290mm 250PCSx10=2,500PCS<br>550mm<br>330mm<br>290mm<br>**----- End of picture text -----**<br>


志豐電子股份有限公司 **KINGSTATE ELECTRONICS CORP 5/5 KPEG208**