KPEG1501

. 

| 

**==> picture [474 x 267] intentionally omitted <==**

**----- Start of picture text -----**<br>
-. SPECIFICATION FOR APPROVAL<br>Kk Re<br>Description Piezo Siren |<br>Kingstate Part No. : KPEG1501<br>Customer’s Model No. — :<br>.<br>. Specification No. : PKD-7462<br>Number Of The Edition — : 1.1<br>**----- End of picture text -----**<br>


**==> picture [272 x 14] intentionally omitted <==**

**----- Start of picture text -----**<br>
CUSTOMER’S APPROVED SIGNATURE<br>**----- End of picture text -----**<br>


| 

**==> picture [423 x 186] intentionally omitted <==**

**----- Start of picture text -----**<br>
7A] KINGSTATE ELECTRONICS CORP.<br>Address: 10F, No. 69-11, Sec. 2, Chung Cheng E. Rd., Tamshui County, Taipei Hsien, Taiwan, R.O.C.<br>te Intemational sales dept.: TEL:886-2-2809-5651 FAX:886-2-2809-7151<br>Domestic sales dept: TEL:886-2-2809-0668  FAX:886-2-28096748<br>; http/Awww.kingstate.com.tw<br>|<br>deze Dts ie Ti Fei<br>AGE ,,fs! reff ' 7/30/05’<br>**----- End of picture text -----**<br>


## **A. SCOPE** 範疇 

This specification applies piezo audio siren, **KPEG1501** 此規格書適用於壓電式蜂鳴器, **KPEG1501** 

## **B. SPECIFICATION** 規格 

|**No.**|<br>**Item**|**Unit**||**Specification**|**Specification**|**Specification**|**Specification**|**Specification**|**Specification**|||||**Condition**|**Condition**|**Condition**|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|1|Operating Frequency<br>|KHz|||||||||||||||
|||||2 ~3 .5|||||||||||||
||操作頻率||||||||||||||||
||||||||||||||||||
|2|Operating Volt. range<br>操作電壓範圍|VDC||6 ~ 14|||||||||||||
|3|Current consumption<br>|mA||MAX. 70<br>Typical  50||||||||||at 12VDC|||
||消耗電流||||||||||||||||
|4|Sound pressure level<br>輸出音壓|dB||102||||||||||at 30 cm/12VDC(MIN.)|||
|5|Rated Voltage<br>額定電壓|VDC||12|||||||||||||
|6|Tone<br>聲音|||Siren<br>警報音|||||||||||||
|7|Operating temp.<br>操作溫度|℃||-10 ~ + 60||||||||||10 minutes|||
|8|Storage temp.<br>儲存溫度|℃||-40 ~ + 80|||||||||||||
|9|Dimension<br>尺寸|mm||L47.0 x W39.0 x H22.8||||||||||See appearance drawing<br>請參照外觀尺寸圖|||
|10|Weight (MAX)<br>重量|gram||27.0|||||||||||||
|11|Material<br>材質|||ABS UL-94 1/16”HB HIGH HEAT<br>(BLACK)|||||||||||||
|12|Terminal<br>端子|||Wire type||||||||||See appearance drawing<br>請參照外觀尺寸圖|||
|13|Environmental<br>Protection Regulation<br>環保法規|||RoHS|||||||||||||
|**C. APPEARANCE DRAWING**||||外觀尺寸||||圖|||||||||
||||||||||||||||||
|||||||||||||||||Red|
||||||||||||||||||
||||||||||||||||||
||||||||||||||||||
||||||||||||||||||
||||||||||||||||||



## **C. APPEARANCE DRAWING** 外觀尺寸圖 

**Tol : ± 0.5 Unit: mm** 

志豐電子股份有限公司 **KINGSTATE ELECTRONICS CORP  2** / **5  KPEG1501** 

## **D. MEASURING METHOD** 測量方法 

S.P.L. Measuring Circuit 音壓測試接線圖 

Mic : RION S.P.L. meter UC30 or equivalent Mic : RION 噪音計 UC30 或同等品 

## **E. VOLTAGE: SOUND PRESSURE LEVEL / VOLTAGE: CURRENT CONSUMPTION CHARACTERISTICS /** 電壓與音壓 電壓與耗電流之特性 

志豐電子股份有限公司 **KINGSTATE ELECTRONICS CORP  3** / **5  KPEG1501** 

## **F. MECHANICAL CHARACTERISTICS** 機械特性 

**==> picture [528 x 250] intentionally omitted <==**

**----- Start of picture text -----**<br>
No.  Item  Test Condition  Evaluation standard<br>90% min. stripped wires shall be<br>Solderability<br>焊錫附著性 Stripped wires of lead wires are immersed in rosin for 5 seconds and wet with solder.(Except the edge<br>1  then immersed in solder bath of +270±5℃ for 3±0.5 seconds.  of terminal)<br>(Connector excepted) 裸線部份浸入松香溶液 5 秒後,再浸入+270±5℃溶融焊鍚槽 3±0.5 秒.  浸入裸線部份附著焊鍚 90%以<br>(端子類不適用此項)<br>上.(末端斷面不算)<br>The pull force shall be applied to double lead wire：<br>Lead Wire Pull   Horizontal  3.0N(0.306kg) for 30 seconds.<br>No damage and cutting off.<br>2  Strength  Vertical    2.0N(0.204kg) for 30 seconds. 線材不鬆動,不脫落.<br>線材拉力 雙線材水平方向施以3.0N(0.306kg)的力量,  垂直方向施以<br>2.0N(0.204kg) 的力量,各30 秒.<br>Buzzer shall be measured after being applied vibration of amplitude of The value of oscillation<br>Vibration   1.5mm with 10 to 55hz band of vibration frequency to each of 3 frequency/ current consumption<br>3<br>振動試驗 per-pendicular directions for 2 hours.   should be in ±10% compared<br>振動週波數 10∼55HZ、全振幅 1.5mm 於 X.Y.Z 3 個方向,各 2 小時.  with initial ones .The SPL should<br>be in ±10dB compared with<br>initial one.<br>The part only shall be dropped from a height of 75cm onto a 40mm thick<br>4  Drop test 落下測試 wooden board 3 times in 3 axes (X.Y.Z). (a total of 9 times). 單體從75 公分高處, X.Y.Z.3 個方向,各3 回,落於 40mm 厚木板上. 諧振頻率與消耗電流變化量須在±10%內.  輸出音壓變化量須在<br>±10dB 內.<br>**----- End of picture text -----**<br>


## **G. ENVIRONMENT TEST** 環境測試 

**==> picture [532 x 310] intentionally omitted <==**

**----- Start of picture text -----**<br>
No.  Item  Test Condition  Evaluation standard<br>High temp. test  After being placed in a chamber at + 80℃ for 240 hours<br>1<br>高溫測試 置於+ 80℃環境中 240 小時<br>Low temp. test   After being placed in a chamber at  –40℃ for 240 hours<br>2<br>低溫測試 置於-40℃環境中 240 小時<br>After being placed in a chamber at +40℃ and 90±5% relative humidity<br>Humidity test<br>3  相對濕度測試 for 240 hours  Being placed for 4 hours at<br>置於+40℃, 相對濕度 90±5%  環境中 240 小時<br>+25℃, buzzer shall be<br>The part shall be subjected to 5 cycles. One cycle shall be consist of::<br>measured. The value of<br>單體承受溫度循環測試 5 次,其循環內容如圖示:<br>oscillation frequency/ current<br>consumption should be in ±10%<br>                                      +80℃<br>compared with initial ones. The<br>SPL should be in ±10dB<br>compared with initial one.<br>                        +25℃                      +25℃ 經測試後,  靜置於+25℃（室溫）<br>Temp. cycle test  環境中 4 小時後,諧振頻率與消耗<br>4  溫度循環試驗            -40℃ 電流變化量須在±10%內.  輸出音<br>壓變化量須在±10dB 內.<br>           0.5hr   0.5hr  0.25  0.5hr   0.5hr   0.5hr  0.25<br>                              3hours<br>**----- End of picture text -----**<br>


志豐電子股份有限公司 **KINGSTATE ELECTRONICS CORP  4** / **5  KPEG1501** 

## **H. RELIABILITY TEST** 信賴性測試 

**==> picture [531 x 728] intentionally omitted <==**

**----- Start of picture text -----**<br>
No.  Item  Test condition  Evaluation standard<br>Being placed for 4 hours at<br>1.Continuous life test 高溫壽命測試(連續)  +25℃, buzzer shall be<br>measured. The value of<br>10 minutes continuous operation at +45℃ with rated voltage applied.<br>oscillation frequency/ current<br>在+45℃環境下,以額定電壓連續操作10 分鐘 consumption should be in ±10%<br>Operating life<br>1  test  2.Intermittent life test  室溫壽命測試(間歇)  compared with initial ones .The<br>壽命測試 A duty cycle of 1 minute on, 0.5 minutes off, a minimum of 960 times at room  SPL should be in ±10dB<br>temp.( +25±2℃)and rated voltage applied  compared with initial one.<br>在室溫下(+25±2℃),  以額定電壓操作,  通電1 分鐘/斷電0.5 分鐘,測試 經測試後,  靜置於+25℃（室溫）<br>環境中 4 小時後,諧振頻率與消耗<br>960 次循環.  電流變化量須在±10%內.  輸出音<br>壓變化量須在±10dB 內.<br>TEST CONDITION.<br>Standard Test Condition  ： a) Temperature：+5 ~ +35℃  b) Humidity：45-85%  c) Pressure：860-1060mbar<br>一般測試條件 ：   a)  溫度：+5 ~ +35℃         b)  濕度：45-85%     c)  氣壓：860-1060mbar<br>Judgement Test Condition   ： a) Temperature：+25 ± 2℃   b) Humidity：60-70%  c) Pressure：860-1060mbar<br>爭議時測試條件 ： a)  溫度：+25 ± 2℃          b)  濕度：60-70%    c)  氣壓：860-1060mbar<br>I. PACKING STANDARD<br>包裝規格<br>76PCS<br>Out Box<br>Out Box<br>Carton Box<br>(10PCS Out Box)<br>Out Box 310mmx248mmx49mm 1x76PCS=76PCS<br>Carton Box 550mmx330mmx290mm 76PCSx10=760PCS<br>550mm<br>330mm<br>290mm<br>**----- End of picture text -----**<br>


## **TEST CONDITION.** 

志豐電子股份有限公司 **KINGSTATE ELECTRONICS CORP  5** / **5  KPEG1501**