KPEG-500

| 

## SPECIFICATION FOR APPROVAL AK a = 

**==> picture [420 x 144] intentionally omitted <==**

**----- Start of picture text -----**<br>
Description : Piezo Audio Indicator<br>Kingstate Part No. KPEG500<br>Customer’s Model No. :<br>Specification No. : PKD-7587<br>Number Of The Edition: 1.1<br>**----- End of picture text -----**<br>


| 

## CUSTOMER’S APPROVED SIGNATURE 

## FREREFEVRETEZN] KINGSTATE ELECTRONICS CORP. 

| 

**==> picture [62 x 2] intentionally omitted <==**

**----- Start of picture text -----**<br>
ss<br>**----- End of picture text -----**<br>


Address: 10F, No. 69-11, Sec. 2, Chung Cheng E. Rd., Tamshui County, Taipei Hsien, Taiwan, R.O.C. oY International sales dept.: TEL:886-2-2809-5651 FAX:886-2-2809-7151 Domestic sales dept: TEL:686-2-2809-0668 FAX:886-2-28096748 http/Awww.kingstate.com.tw . Ary, @ 4B Fei 

## **A. SCOPE** 範疇 

## This specification applies piezo audio indicator, **KPEG500** 此規格書適用於壓電式蜂鳴器, **KPEG500** 

## **B. SPECIFICATION** 規格 

|**No.**|**Item**|**Unit**|**Specification**|**Condition**|
|---|---|---|---|---|
|1<br>R|esonant frequency<br>共振頻率|KHz|||
||||2.5 ± 0.5||
||||||
|2<br>O|perating Volt. range<br>操作電壓範圍|VDC|5 ~ 13||
|3<br>C|urrent consumption<br>消耗電流|mA|MAX. 60|at 12VDC|
|4<br>S|ound pressure level<br>輸出音壓|dB|MIN. 104（85dB at 3 meters）|at 30cm/12VDC|
|5|Rated Voltage<br>額定電壓|VDC|12||
|6|Tone<br>聲音||Continuous<br>直音||
|7|Operating temp.<br>操作溫度|℃|-30 ~ +85||
|8|Storage temp.<br>儲存溫度|℃|-40 ~ +95||
|9|Dimension<br>尺寸|mm|φ49.1x H28.9|See appearance drawing<br>請參照外觀尺寸圖|
|10|Weight (MAX)<br>重量|gram|27.5||
|11|Material<br>材質||ABS UL-94 1/16” HB HIGH HEAT<br>（BLACK）||
|12|Terminal<br>端子||Pin type<br>(鍍化金/PlatingAu)|See appearance drawing<br>請參照外觀尺寸圖|
|13<br>P|Environmental<br>rotection Regulation<br>環保法規||RoHS||



## **C. APPEARANCE DRAWING** 外觀尺寸 

**==> picture [531 x 170] intentionally omitted <==**

**----- Start of picture text -----**<br>
音孔貼紙 標簽貼紙(貼於A蓋側面正極處)<br>REMOVE AFTER WASHING KINGSTATE KPEG500<br>**----- End of picture text -----**<br>


**Tol : ± 0.5 Unit: mm** 

志豐電子股份有限公司 **KINGSTATE ELECTRONICS CORP 2/5 KPEG500** 

## **D. Measuring Method** 測量方法 

1.S.P.L. Measuring Circuit 音壓測試接線圖 

Mic : RION S.P.L  meter UC30 or equivalent Mic : RION 噪音計 UC30 或同等品 

## **E. VOLTAGE: SOUND PRESSURE LEVEL / VOLTAGE: CURRENT CONSUMPTION CHARACTERISTICS /** 電壓與音壓 電壓與耗電流之特性 

志豐電子股份有限公司 **KINGSTATE ELECTRONICS CORP 3/5 KPEG500** 

## **F. MECHANICAL CHARACTERISTICS** 機械特性 

|**No.**|**Item**|**Test Condition**|**Evaluation standard**|
|---|---|---|---|
|1|Solderability<br>焊錫附著性|Lead terminals are immersed in rosin for 5 seconds and then immersed<br>in solder bath of +270±5℃for 3±1 seconds.<br>端子部份浸入松香溶液5秒後,再浸入+270±5℃溶融焊鍚槽中3±1秒.|90% min. lead terminals shall be<br>wet with solder. (Except the<br>edge of terminal)<br>浸入端子部份附著焊鍚90%以<br>上.(末端斷面不算)|
|2|Soldering Heat<br>Resistance<br>焊錫耐熱性|Lead terminal are immersed up to 1.5mm from sounder’s body in solder<br>bath of +300±5℃for 3± 0.5 seconds or +260±5℃for 10±1 seconds.<br>距離端子根部1.5mm的位置,浸入+300±5℃的焊鍚槽3±0.5秒,<br>或+260±5℃ 的焊錫槽10±1 秒.|No interference in operation<br>操作上無任何不良.|
|3|Terminal Mechanical<br>Strength<br>端子強度|<br>The force 10 seconds of 9.8N (1.0kg) is applied to each terminal in axial<br>direction.<br>各端子的軸方向施以9.8N (1.0kg)的力量10秒.|No damage and cutting off<br>端子不鬆動,不脫落.|
|4|Vibration<br>振動試驗|Buzzer shall be measured after being applied vibration of amplitude of<br>1.5mm with 10 to 55hz band of vibration frequency to each of 3<br>per-pendicular directions for 2 hours.<br>振動週波數10∼55HZ、全振幅1.5mm 於X.Y.Z 3 個方向,各2 小時.|<br> <br>The value of oscillation<br>frequency/ current consumption<br>should be in 10% compared with<br>initial ones .The SPL should be<br>in ± 10dB compared with initial<br>one.<br>諧振頻率與消耗電流變化量須在<br>±10%內.輸出音壓變化量須在<br>±10dB 內.|
|5|Drop test<br>落下測試|The part only shall be dropped from a height of 75cm onto a 40mm thick<br>wooden board 3 times in 3 axes (X.Y.Z). (a total of 9 times).<br>單體從75公分高處, X.Y.Z.3個方向,各3回,落於40mm厚木板上.||
|**G. ENVIRONMENT TEST**環境測試||||
|**No.**|**Item**|**Test Condition**<br>|**Evaluation standard**|
|1|High temp. test<br>高溫測試|After being placed in a chamber at +95℃for 240 hours<br>置於+95℃環境中240 小時<br>|Being placed for 4 hours at<br>+25℃, buzzer shall be<br>measured. The value of<br>oscillation frequency/ current<br>consumption should be in ±10%<br>compared with initial ones .The<br>SPL should be in ±10dB<br>compared with initial one.<br>經測試後,靜置於+25℃（室溫）<br>環境中4小時後,諧振頻率與消耗<br>電流變化量須在±10%內.輸出<br>音壓變化量須在±10dB內.|
|2|Low temp. test<br>低溫測試|After being placed in a chamber at –40℃for 240 hours<br>置於-40℃環境中240 小時<br>||
|3|Humidity test<br>相對濕度測試|After being placed in a chamber at +40℃and 90±5% relative humidity<br>for 240 hours<br>置於+40℃, 相對濕度90±5%環境中240 小時||
|4|Temp. cycle test<br>溫度循環試驗|The part shall be subjected to 5 cycles. One cycle shall be consist of:<br>單體承受溫度循環測試5次,其循環內容如圖示:<br>+95℃<br>+25℃+25℃<br>-40℃<br>0.5hr  0.5hr  0.25   0.5hr  0.5hr   0.5hr  0.25<br>3hours||



志豐電子股份有限公司 **KINGSTATE ELECTRONICS CORP 4/5 KPEG500** 

## **H. RELIABILITY TEST** 信賴性測試 

**==> picture [543 x 730] intentionally omitted <==**

**----- Start of picture text -----**<br>
No.  Item  Test condition  Evaluation standard<br>Being placed for 4 hours at<br>+25℃, buzzer shall be<br>1.Continuous life test 高溫壽命測試(連續)  measured. The value of<br>48 hours continuous operation at +70℃ with rated voltage applied.  oscillation frequency/ current<br>在+70℃環境下,以額定電壓連續操作48 小時 consumption should be in ±10%<br>Operating life<br>2.Intermittent life test  室溫壽命測試(間歇)  compared with initial ones .The<br>1  test<br>SPL should be in ±10dB<br>壽命測試 A duty cycle of 1 minute on, 1 minutes off, a minimum of 5,000 times at room<br>compared with initial one.<br>temp. ( +25±2℃) and rated voltage applied<br>在室溫下(+25±2℃),  以額定電壓操作,  通電1 分鐘/斷電1 分鐘,測試 經測試後,  靜置於+25℃（室溫）<br>5,000 次循環.  環境中4 小時後,諧振頻率與消耗<br>電流變化量須在±10%內.  輸出音<br>壓變化量須在±10dB 內.<br>TEST CONDITION.<br>Standard Test Condition  :  a) Temperature : +5 ~ +35℃   b) Humidity : 45-85%  c) Pressure : 860-1060mbar<br>一般測試條件 :    a)  溫度 : +5 ~ +35℃         b)  濕度 : 45-85%     c)  氣壓 : 860-1060mbar<br>Judgment Test Condition  :  a) Temperature : +25 ± 2℃    b) Humidity : 60-70%  c) Pressure : 860-1060mbar<br>爭議時測試條件        :    a)  溫度 : +25 ± 2℃          b)  濕度 : 60-70%    c)  氣壓 : 860-1060mbar<br>I. PACKING STANDARD<br>包裝規格<br>薄珍珠棉<br>6PCSx3+5PCSx2=28PCS<br>一層厚珍珠棉<br>Out Box<br>Out Box<br>Carton Box<br>(10PCS Out Box)<br>Out Box 310mmx248mmx49mm 28PCSx1=28PCS<br>Carton Box 550mmx330mmx290mm 28PCSx10=280PCS<br>550mm<br>330mm<br>290mm<br>**----- End of picture text -----**<br>


志豐電子股份有限公司 **KINGSTATE ELECTRONICS CORP 5/5 KPEG500**