K90TLGRY6PQ

EZ-LIGHT K90L 

## Features 

Large one to five color indicator with flashing input control 

- Bright, uniform indicator light 

- All models have flashing input control 

- Models are available with up to five colors in one device 

- Rugged IP67-rated design 

- 12 V DC to 30 V DC operation 

## Models 

|Models||||||
|---|---|---|---|---|---|
|Model<br>K90LGPQ<br>K90LRPQ<br>K90LYPQ<br>K90LBPQ<br>K90LWPQ<br>K90LGNQ<br>K90LRNQ<br>K90LYNQ<br>K90LBNQ<br>K90LWNQ|No. of Colors|No. of Colors<br>1|Colors<br>Green<br>Red<br>Yellow<br>Blue<br>White<br>Green<br>Red<br>Yellow<br>Blue<br>White|Input<br>PNP<br>NPN|Connection<br>Integral 5-pin M12 male quick-disconnect connector|
|Model|No. of Colors|No. of Colors|Colors|Input|Connection|
|K90LGRPQ||2|Green, Red|||
||||||Integral 5-pin M12 male quick-disconnect connector|
|K90LGYRPQ||3|Green, Red, Yellow|||
|||||PNP||
|K90LBGYRPQ||4|Blue, Green, Yellow, Red|||
||||||Integral 8-pin M12 male quick-disconnect connector|
|K90LWBGYRPQ<br>K90LGRNQ||5<br>2|White, Blue, Green, Yellow, Red<br>Green, Red|||
||||||Integral 5-pin M12 male quick-disconnect connector|
|K90LGYRNQ||3|Green, Red, Yellow|||
|||||NPN||
|K90LBGYRNQ||4|Blue, Green, Yellow, Red|||
||||||Integral 8-pin M12 male quick-disconnect connector|
|K90LWBGYRNQ||5|White, Blue, Green, Yellow, Red|||



Integral quick-disconnect connector models are listed; a mating cordset is required (see "Accessories" on page 4). 

- To order the 150 mm (5.9 in) PVC cable with quick-disconnect connector models, replace Q with QP in the model number, for example, K90LGYRQP. 

- To order the 2 m (6.5 ft) cable models, omit the suffix Q in the model number, for example, K90LGYR. 

## Washdown Silicone Cover WC-K90 

**==> picture [388 x 20] intentionally omitted <==**

**----- Start of picture text -----**<br>
Washdown Cover Model Description<br>WC-K90 FDA-grade silicone cover<br>**----- End of picture text -----**<br>


Original Instructions 26-Feb-26 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

p/n: 181765 Rev. G 

EZ-LIGHT K90L 

## Installing the Silicone Cover 

To properly install the FDA-grade silicone cover and achieve an IP69 rating, follow these instructions. 

1. Turn the cover inside out. 

2. Place the cover on top of the indicator. 

3. Roll the cover onto the indicator. 

4. Continue rolling the cover down, around the base of the indicator, until the entire light is covered. 

5. Mount the indicator and cover assembly to a bracket wide enough to cover the base of the assembly. The cover should be clamped firmly between the indicator and the bracket. 

NOTE: The FDA-grade silicone cover withstands high pressure, high-temperature washdown, and increases the product rating to IEC IP69. The cover is ECOLAB® certified to withstand aggressive cleaning procedures with chemicals used in the food processing industry. 

## Wiring 

**==> picture [462 x 412] intentionally omitted <==**

**----- Start of picture text -----**<br>
5-pin PNP Input 5-Pin NPN Input Key<br>Indicator bu (3) Indicator bn (1)<br>Color Color<br>bk (4) 12–30 V DC bk (4) 12–30 V DC 2 1<br>C1 C1<br>5<br>bn (1) bu (3)<br>C2 C2 3 4<br>Ok Or RS<br>1 = Brown<br>wh (2) wh (2) 2 = White<br>C3 C3 3 = Blue<br>4 = Black<br>5 = Gray<br>gy (5) gy (5) Gray wire (flashing input)<br>SE} F SE] F<br>Oe<br>8-pin PNP Input 8-Pin NPN Input Key<br>Indicator bu (7) Indicator bn (2)<br>Color Color<br>12–30 V DC 12–30 V DC<br>pk (6) pk (6)<br>C1 oOoF + C1 OO<br>2 1<br>bn (2) bu (7)<br>C2 C2 3 7<br>wh (1) wh (1) 8 6<br>C3 C3<br>O—= Oe 4 XS 5<br>gy (5) gy (5) 1 = White<br>C4 C4 2 = Brown<br>Or Or 3 = Green<br>C5 ye (4) C5 ye (4) 4 = Yellow5 = Gray6 = Pink<br>O R= OR 7 = Blue<br>rd (8) rd (8) 8 = Red<br>F F Red wire (flashing input); the green wire is not used.<br>Or Or<br>gn (3) gn (3)<br>Not used Not used<br>**----- End of picture text -----**<br>


© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

page 2 

26-Feb-26 

EZ-LIGHT K90L 

## Specifications 

Operating Conditions –40 °C to +50 °C (–40 °F to +122 °F) Certifications 

Supply Voltage and Current 12 V DC to 30 V DC 475 mA maximum at 12 V DC 175 mA maximum at 30 V DC 

**==> picture [305 x 166] intentionally omitted <==**

**----- Start of picture text -----**<br>
Banner Engineering BV<br>Park Lane, Culliganlaan 2F bus 3<br>Protected against reverse polarity and transient<br>voltages 1831 Diegem, BELGIUM<br>75 ms maximum<br>.<br>1.6 Hz flash rate via flash input wire Light Characteristics<br>Typical<br>Integral 5-pin M12 male quick-disconnect connector; Integral 8-pin M12 male quick- Color Wavelength or Color  Typical Intensity<br>disconnect connector; 150 mm (6 in) PVC-jacketed  Temperature<br>cable with a 5-pin M12 male quick-disconnect<br>connector; 150 mm (6 in) PVC-jacketed cable with  Red 625 nm 65 lumens<br>an 8-pin M12 male quick-disconnect connector; or<br>2 m (6.5 ft) unterminated 3-wire PVC-jacketed  Yellow 590 nm 35 lumens<br>cable depending on the model Green 525 nm 150 lumens<br>Base and dome: Polycarbonate Blue 470 nm 55 lumens<br>White 6000K to 7100K 200 lumens<br>**----- End of picture text -----**<br>


Supply Protection Circuitry 

Input Response Time 75 ms maximum 

Adjustments 1.6 Hz flash rate via flash input wire 

Connections 

Construction 

Environmental Rating IP67; Enclosure UL Type 4X, 13 

## Indicators 

Vibration and Mechanical Shock 

1 to 5 colors, depending on the model Only one color can be on at a time. The higher color number overrides the lower color number. 

All models meet MIL-STD-202F, Method 201A (Vibration: 10 Hz to 60 Hz maximum, 0.06 inch (1.52 mm) double amplitude, 10G maximum acceleration) requirements. Also meets IEC 60947-5-2 (Shock: 30G 11 ms duration, half sine wave) requirements. 

## Required Overcurrent Protection 

WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. 

Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. 

Supply wiring leads < 24 AWG shall not be spliced. For additional product support, go to www.bannerengineering.com. 

**==> picture [125 x 57] intentionally omitted <==**

**----- Start of picture text -----**<br>
Supply  Required  Supply  Required<br>Wiring  Overcurrent  Wiring  Overcurrent<br>(AWG) Protection (A) (AWG) Protection (A)<br>20 5.0 26 1.0<br>22 3.0 28 0.8<br>24 2.0 30 0.5<br>**----- End of picture text -----**<br>


## Dimensions 

All measurements are listed in millimeters [inches], unless noted otherwise. The measurements provided are subject to change. 

**==> picture [411 x 251] intentionally omitted <==**

**----- Start of picture text -----**<br>
Standard Model Model with Washdown Cover<br>87 mm 72.5 mm<br>[3.43”] [2.85”]<br>L<br>M30 X 1.5<br>=| (Oo<br>M12 X 1 CL 20 mm<br>[0.79”] (K90 shown in gray)<br>Ø 96.5 mm<br>90 mm [3.80”]<br>1/2-14 NPT<br>[3.54”]<br>an 2<br>Ø 62.0 mm<br>[2.44”]<br>CL<br>CL<br>**----- End of picture text -----**<br>


© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

26-Feb-26 

page 3 

EZ-LIGHT K90L 

## Accessories 

## Cordsets 

**==> picture [500 x 400] intentionally omitted <==**

**----- Start of picture text -----**<br>
5-Pin Single-Ended M12 Female Cordsets<br>Model Length Style Dimensions Pinout (Female)<br>MQDC1-501.5 0.5 m (1.5 ft)<br>MQDC1-503 0.9 m (2.9 ft) 44 Typ.<br>MQDC1-506 2 m (6.5 ft)<br>MQDC1-515 5 m (16.4 ft) Straight 1 2<br>MQDC1-530 9 m (29.5 ft) M12 x 1 5<br>MQDC1-560 18 m (59 ft) ø 14.5 4 3<br>MQDC1-5100 31 m (101.7 ft) 1 = Brown<br>2 = White<br>MQDC1-506RA 2 m (6.5 ft) 32 Typ. 3 = Blue<br>MQDC1-515RA 5 m (16.4 ft) [1.26"] 4 = Black<br>5 = Gray<br>MQDC1-530RA 9 m (29.5 ft)<br>30 Typ.<br>Right-Angle [1.18"]<br>MQDC1-560RA 19 m (62.3 ft)<br>M12 x 1<br>ø 14.5 [0.57"]<br>8-Pin Single-Ended M12 Female Open-Shielded Cordsets<br>Model Length Style Dimensions Pinout (Female)<br>MQDC2S-806 2.04 m (6.7 ft) 44 Typ.<br>MQDC2S-815 5.04 m (16.54 ft)<br>1 2<br>MQDC2S-830 10.04 m (32.95 ft) Straight<br>7 3<br>M12 x 1<br>MQDC2S-850 16 m (52.49 ft) ø 14.5 8 4<br>MQDC2S-806RA 2 m (6.56 ft) 32 Typ. 6 5<br>MQDC2S-815RA 5 m (16.4 ft) [1.26"] 1 = White<br>2 = Brown<br>MQDC2S-830RA 10 m (32.81 ft) 3 = Green<br>30 Typ. 4 = Yellow<br>Right-Angle [1.18"] 5 = Gray<br>6 = Pink<br>7 = Blue<br>MQDC2S-850RA 16 m (52.49 ft) 8 = Red<br>M12 x 1<br>ø 14.5 [0.57"]<br>**----- End of picture text -----**<br>


© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

26-Feb-26 

page 4 

EZ-LIGHT K90L 

## Elevated Mount System 

**==> picture [500 x 293] intentionally omitted <==**

**----- Start of picture text -----**<br>
Adapter/Cover Model Description<br>SA-M30  - Black<br>polycarbonate • Streamlined black PC or Gray PC thread cover<br>• Covers the outer M30 threads on the light's base<br>• Typically used for the TL70 Tower Light and K90<br>series<br>SA-M30C  - Gray  • Mounting hardware included<br>polycarbonate • CAD files: DXF, PDF, IGS, STP<br>Black Anodized Aluminum, ½ in. NPT  Clear Anodized Aluminum, ½ in. NPT<br>Description<br>Pipe Models Pipe Models<br>Adapter/<br>Cover SOP-E12-150A , 150 mm (6 in) long SOP-E12-150AC , 150 mm (6 in) long • Elevated-use stand-off pipe<br>• Threaded at both ends<br>SOP-E12-300A , 300 mm (12 in) long SOP-E12-300AC , 300 mm (12 in)  • Compatible with most industrial environments<br>long • CAD Files:<br>Pipe SOP-E12-600A , 600 mm (24 in) long - ◦ SOP-E12-150A : DXF, PDF, IGS, STP<br>◦ SOP-E12-300A : DXF, PDF, IGS, STP<br>SOP-E12-900A , 900 mm (36 in) long SOP-E12-900AC , 900 mm (36 in)  ◦◦ SOP-E12-600ASOP-E12-900A : : DXFDXF, , PDFPDF, , IGSIGS, , STPSTP<br>long<br>Mounting Base Model Description<br>Mounting SA-FFB12  - Black<br>Base polycarbonate<br>• For use with ½ in. stand-off pipes<br>• 110° rotation<br>• Stainless steel hardware<br>SA-FFB12C polycarbonate - Gray  • CAD files: DXF, PDF, IGS, STP<br>**----- End of picture text -----**<br>


## Other Pipes 

**==> picture [500 x 80] intentionally omitted <==**

**----- Start of picture text -----**<br>
304 Stainless Steel, ½ in. NPT Pipe Models Description<br>SOP-E12-150SS , 150 mm (6 in) long • Elevated-use stand-off pipe<br>• Threaded at both ends<br>SOP-E12-300SS , 300 mm (12 in) long • Compatible with most industrial environments<br>SOP-E12-600SS , 600 mm (24 in) long • CAD Files:<br>◦ SOP-E12-150x : DXF, PDF, IGS, STP<br>◦ SOP-E12-300x : DXF, PDF, IGS, STP<br>SOP-E12-900SS , 900 mm (36 in) long ◦◦ SOP-E12-600xSOP-E12-900x : : DXFDXF, , PDFPDF, , IGSIGS, , STPSTP<br>**----- End of picture text -----**<br>


## Other Mounting Bases 

**==> picture [500 x 166] intentionally omitted <==**

**----- Start of picture text -----**<br>
Mounting Base Model Description<br>SA-E12M30  - Black acetal<br>• Streamlined black acetal or white UHMW mounting base adapter/cover<br>• Adapter from ½ in. NPSM/DN15 pipe to 30 mm (1-3/16 in) drilled hole<br>• Mounting hardware included<br>SA-E12M30C  - White UHMW • CAD files: DXF, PDF, IGS, STP<br>Mounting Base Model Description<br>• Die-cast zinc base with black paint<br>• Elevated-use stand-off pipes (½ in, NPSM/DN15)<br>SA-F12 • M5 mounting hardware and nitrile gasket included<br>• CAD files: DXF, PDF, IGS, STP<br>**----- End of picture text -----**<br>


© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

26-Feb-26 

page 5 

EZ-LIGHT K90L 

## LMB Sealed Right-Angle Bracket 

- Model Description 

- LMB30RA - Black polycarbonate • Direct-Mount Models 

- CAD Files: DXF, PDF, IGS, STP • Bracket kit with base, 30 mm adapter, set screw, fasteners, LMB30RAC - Gray polycarbonate O-rings, and gaskets. CAD Files: DXF, PDF, IGS, STP LMBE12RA - Black polycarbonate • Pipe-Mount Models 

- CAD Files: DXF, PDF, IGS, STP • Bracket kit with base, ½-14 pipe adapter, set screw, fasteners, O-rings, and gaskets 

- LMBE12RAC - Gray polycarbonate • For use with stand-off pipe (listed and sold separately) CAD Files: DXF, PDF, IGS, STP 

**==> picture [149 x 61] intentionally omitted <==**

## Brackets 

- 55 

- LMBE12RA35 35 • Direct mounting of stand-off pipe, with common bracket type 38.25 • Zinc-plated steel • 1/2-14 NPSM nut • Mounting distance from the wall to the center of the 1/2-14 NPSM nut is 35 mm • CAD Files: DXF, PDF, IGS, STP 57 Hole center spacing: 20.0 2X Ø9 65 

- LMBE12RA45 45 38.25 

- • Direct mounting of stand-off pipe, with common bracket type • Zinc-plated steel • 1/2-14 NPSM nut • Mounting distance from the wall to the center of the 1/2-14 NPSM nut is 45 mm • CAD Files: DXF, PDF, IGS, STP 81 Hole center spacing: 35.0 2X Ø11 

## LMBE12RA35 

## LMBE12RA45 

## Sun Shield 

## K90DS 

- Use for enhanced visibility in direct sunlight conditions 

- Polycarbonate 

## Banner Engineering Corp Limited Warranty 

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. 

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. 

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. 

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. 

For patent information, see www.bannerengineering.com/patents. 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

page 6 

26-Feb-26