K80FLGRBPQ

EZ-LIGHT® K80FL 

## Features 

Large, Multicolor General-Purpose Solid ON or Flashing Indicator 

To view or download the latest technical information about this product, including specifications, dimensions, accessories, and wiring, go to www.bannerengineering.com. 

- Multicolor, single segment 

- • 1-, 2-, or 3-color models available; 9 available colors • Bright, even light • DIP switches adjust solid ON or flashing for each color • Two user-selectable flash rates • 12 V DC to 30 V DC operation • Flat-mount 

WARNING: 

- Do not use this device for personnel protection 

- Using this device for personnel protection could result in serious injury or death. 

- • This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A device failure or malfunction can cause either an energized (on) or de-energized (off) output condition. 

## Models 

**==> picture [494 x 313] intentionally omitted <==**

**----- Start of picture text -----**<br>
Models Color 1 Color 2 Color 3 Input Connector<br>K80FLGRXP No color Terminal-wired<br>K80FLGRBPQ Green Red Blue PNP<br>Integral 4-pin M12 male quick-disconnect<br>connector<br>K80FLGRYPQ Yellow<br>The following models are no longer available for order but are still covered by the information in this document.<br>Family Color 1 Color 2 Color 3 Input Connector<br>K80FL G Y R P Q<br>G = Green<br>R = Red<br>Y = Yellow<br>Blank = Terminal-wired<br>B = Blue<br>W = White Q = Integral 4-pin M12 male quick-<br>disconnect connector<br>P = PNP<br>O = Orange<br>QP = 150 mm (6 in) PVC-jacketed cable<br>with a 4-pin M12 male quick-disconnect<br>T = Turquoise connector<br>V = Violet<br>M = Magenta<br>X = No color in this position<br>Example Model Number of LED Colors LED Indicators Connection<br>K80FLGXXPQ Green<br>1 Integral 4-pin M12 male quick-disconnect connector<br>K80FLRXXPQ Red<br>K80FLGBXP 2 Green, Blue Terminal-wired<br>Continued on page 2<br>**----- End of picture text -----**<br>


The following models are no longer available for order but are still covered by the information in this document. 

Original Instructions 04-May-26 

© Banner Engineering Corp. All rights reserved. 

www.bannerengineering.com 

p/n: 162558 Rev. D 

EZ-LIGHT® K80FL 

**==> picture [470 x 195] intentionally omitted <==**

**----- Start of picture text -----**<br>
Continued from page 1<br>Example Model Number of LED Colors LED Indicators Connection<br>K80FLGYXP Green, Yellow<br>K80FLGRYPQP 3 Green, Red, Yellow 150 mm (6 in) PVC-jacketed cable with a 4-pin M12 male quick-disconnect connector<br>Wiring<br>Wiring Image 4-pin M12 Male Pinout Key<br>2 1 1 = Brown<br>Indicator bu (3) 2 = White<br>Color 3 = Blue<br>12-30 V DC<br>bk (4) 4 = Black<br>C1 | —<br>3 4<br>bn (1)<br>C2<br>wh (2)<br>C3<br>8 | . }<br>**----- End of picture text -----**<br>


## Wiring 

## Setup for Solid ON or Flash 

NOTE: The Program DIP switch is located inside the cover. Remove the four screws to remove the cover. 

**==> picture [460 x 153] intentionally omitted <==**

**----- Start of picture text -----**<br>
Switch Number Position Function Switch Number Position Function<br>ON ON Color 2 flash<br>1 No function 4<br>OFF OFF Color 2 solid ON<br>ON ON Color 3 flash<br>2 No function 5<br>OFF OFF Color 3 solid ON<br>ON Color 1 flash ON Flash rate 1 Hz<br>3 6<br>OFF Color 1 solid ON OFF Flash rate 2 Hz<br>Specifications<br>Supply Voltage and Current Environmental Rating<br>**----- End of picture text -----**<br>


## Specifications 

Supply Voltage and Current 12 V DC at 140 mA max. 

IP67 

30 V DC at 60 mA max. 

- Operating Conditions –40 °C to +50 °C (–40 °F to +122 °F) 

## Adjustments 

- 6-position Program DIP switch on the back of the indicator cover 

- Indicators 

- 1, 2, or 3 colors, depending on model 

- Input Response Time 10 ms max. 

For normal operation, no adjustment should be necessary; these switches should remain all in the down position For alternate operation (flash functionality), see Setup for Solid ON or Flash section 

## Construction 

Base: Polycarbonate Translucent Face: Acrylic 

## Connections 

Integral 4-pin M12 male quick-disconnect connector; 150 mm (6 in) PVC-jacketed cable with a 4-pin M12 male quickdisconnect connector; or terminal-wired, depending on model Optional ½-14 NPSM cord grip model BWA-CG.5-1 

2 | 4 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

04-May-26 

EZ-LIGHT® K80FL 

## Indicator Characteristics 

**==> picture [221 x 94] intentionally omitted <==**

**----- Start of picture text -----**<br>
Color Dominant Wavelength (nm) or  Lumen Output (Typical at<br>Color Temperature (CCT) 25 °C)<br>Green 525 nm 39<br>Red 630 nm 28<br>Yellow 589 nm 23<br>Blue 470 nm 8.5<br>Continued on page 3<br>**----- End of picture text -----**<br>


**==> picture [222 x 62] intentionally omitted <==**

**----- Start of picture text -----**<br>
Continued from page 2<br>Color Dominant Wavelength (nm) or  Lumen Output (Typical at<br>Color Temperature (CCT) 25 °C)<br>Orange 606 nm 18<br>White 6000 K 71<br>**----- End of picture text -----**<br>


## Certifications 

Banner Engineering BV Park Lane, Culliganlaan 2F bus 3 1831 Diegem, BELGIUM 

## Dimensions 

All measurements are listed in millimeters [inches], unless noted otherwise. The measurements provided are subject to change. 

**==> picture [253 x 176] intentionally omitted <==**

**----- Start of picture text -----**<br>
80.8 mm<br>(3.18")<br>65.0 mm 109.5 mm<br>(2.56") 41.0 mm (4.31")<br>(1.61")<br>65.0 mm Ø 66.0 mm<br>(2.56") (2.69")<br>Internal Threads ½ - 14 NPSM<br>4X Ø 5.5 mm (Ø 0.22")  Max. Torque 2.25 Nm (20 in–lbf)<br>Max. Torque 1.12 Nm (10 in–lbf)  26.0 mm<br>with supplied screws (1.02")<br>4X 8–32 UNC  M12 X 1<br>Max. Torque 1.12 Nm (10 in–lbf)<br>**----- End of picture text -----**<br>


## Accessories 

## Cordsets 

**==> picture [500 x 146] intentionally omitted <==**

**----- Start of picture text -----**<br>
4-Pin Single-Ended M12 Female Cordsets<br>Model Length Style Dimensions Pinout (Female)<br>MQDC-406 2 m (6.56 ft) 44 Typ.<br>MQDC-415 5 m (16.4 ft)<br>1 = Brown<br>MQDC-430 9 m (29.5 ft) 1 2 2 = White<br>M12 x 1 3 = Blue<br>Straight ø 14.5 5 4 = Black5 = Not used<br>Ø5.2 mm 4 3<br>MQDC-450 15 m (49.2 ft)<br>7 mm<br>58 mm<br>Continued on page 4<br>**----- End of picture text -----**<br>


© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

3 | 4 

04-May-26 

EZ-LIGHT® K80FL 

**==> picture [500 x 174] intentionally omitted <==**

**----- Start of picture text -----**<br>
Continued from page 3<br>4-Pin Single-Ended M12 Female Cordsets<br>Model Length Style Dimensions Pinout (Female)<br>MQDC-406RA 2 m (6.56 ft) 32 Typ.<br>[1.26"]<br>MQDC-415RA 5 m (16.4 ft)<br>MQDC-430RA 9 m (29.5 ft)<br>30 Typ. 2<br>[1.18"] 3<br>1<br>Right-Angle 4<br>M12 x 1<br>ø 14.5 [0.57"]<br>MQDC-450RA 15 m (49.2 ft)<br>Ø5.2 mm<br>7 mm<br>58 mm<br>**----- End of picture text -----**<br>


## Bracket 

- SMBDX80DIN 89 

- • Black reinforced thermoplastic • Bracket for mounting on a 35 mm DIN rail • CAD Files: DXF, PDF, IGS, STP 89 

## Accessory Quadrant Labels 

Transparent self-adhesive cover labels for printing in a standard laser printer; print your own labels to easily identify each quadrant. Clear protective labels provide additional protection for laser print work in many industrial environments. Six labels per sheet; 5 sheets per package. 

Model 

Description Size 

SALK-K80L4-0 1-quadrant transparent laser label (includes 30 labels) 8.5 in × 11 in 

## Banner Engineering Corp Limited Warranty 

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. 

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. 

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. 

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. 

For patent information, see www.bannerengineering.com/patents. 

4 | 4 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

04-May-26