K5590S

Sentry 

**271** 

## circuit protection 

**range introduction** 

The Sentry range of Consumer Units from MK Electric has been stylishly designed to blend in with its environment. The curved lines and slim-line appearance mean it won’t look out of place when installed in hallways, lounges or kitchens of new properties. The expanded range includes a 21-module unit for larger installations and also a 4-module unit to cater for small one-off installations and extensions to existing ones. 

The MK Electric Design Service offers a pre-assembly service for custom built boards with all devices fitted, busbars cut and fitted with devices, live and neutral cables terminated. This service is available across the entire range of Metal, Insulated, Flush and Skeleton units. 

## **Supports 17th Edition compliance** 

Full range of products to support compliance with the 17th Edition of the Wiring Regulations including RCBOs and pre-assembled split load boards with a variety of RCD configurations. 

## **Sentry Skeleton boards for social housing** 

For use in a Mantel or Clifton type enclosure, a complete offering of blank and pre-configured skeleton units for use in buildings with multi-occupancy dwellings. 

**MK Electric design Service for pre-assembled consumer Units** Save time and money by specifying project requirements through the MK Electric Design Service. Pre-assembled custom built boards, with all devices prefitted with busbars and cables are available to suit any installation. Available across the entire range of Metal, Insulated, Flush and Skeleton units. 

## **Flush mounting versions** 

Flush mounting available for even neater installations. 

## **Protective lid** 

Opaque and downward opening lid conceals protective devices and labelling. 

## **Floating busbar system** 

Gives maximum installation flexibility. 

## **broad selection of pre-assembled split load units available** 

Suits a variety of applications and saves installation time. 

## **Stacking options** 

For larger installations dual rail 24, 32 and 42 module units possible in both insulated and metal. 

**272** ™ Sentry cq circuit protection www.mkelectric.co.uk eee 

**MK Sentry consumer Unit Features and benefits** 

**UniTS can** oO **bE STacKEd FOr larGEr inSTallaTiOnS** 

## **cOMPacT SiZE** 

But wiring space increased **lOW PrOFilE** where required most **and cUrvEd dESiGn** Blends unobtrusively into the environment 

**OPTiOnal lOcKinG MEchaniSM** 

## **diScrEET MOUldEd in lOGO** 

No visible fixing screws 

## **cOnSUMEr UniT SElEcTiOn GUidE** 

## **FlUSh MOUnTablE OPTiOnS** 

For an even neater installation 

**STEP 1** Determine the type of consumer unit configuration required. e.g Split Load, Standard or combination of split load / single RCD or dual RCD. For each Switch Disconnector or RCD to be used allow 2 modular ways. 

**STEP 2** Determine the number of outgoing circuits required. e.g Cooker, Lighting, Ring Main etc. For each circuit to be protected by an MCB or RCBO allow 1 modular way. 

## **OPaQUE and dOWnWard OPEninG lid** 

Hides labels and devices 

**STEP 3** Determine what control products are required. e.g Bell Transformer, Time Delay Switch, contactors, timeswitches etc. 

**STEP 4** Determine the number of ‘spare’ modular ways required for future upgrades. For each ‘spare’ modular way select 1 Sentry blank module – 5544s or K5545sMAG (cover mounted blanks supplied with consumer units. See page 291). 

**STEP 5** Now add together the total number of modular ways required. 

**STEP 6** Select from our range of Insulated, Metal, Flush or stacked consumer units (using standard consumer units plus stacking kits). Choose the type and size most appropriate for your requirements. 

Sentry 

**273** 

## circuit protection 

**==> picture [328 x 626] intentionally omitted <==**

**----- Start of picture text -----**<br>
cOlOUr cOdEd<br>EarTh and nEUTral<br>° TErMinal lOcaTEd<br>aT TOP OF UniT FOr<br>EaSE OF WirinG<br>aMPlE 360º KnOcK-OUTS<br>FOr cablE rOUTinG<br>rf)I ! Open cable entry at   !I<br>rear plus optional rear<br>knock-outs<br>eje © eee e eee<br>2 =. B=<br>ctkis Son ein aia<br>OFFSET incOMEr<br>O4 3 -<br>Provides additional wiring<br>space making mains input<br>connections easier<br>EaSily<br>FlOaTinG<br>; ; bUSbar  rEMOvablE<br>aMPlE WirinG<br>din-rail<br>SySTEM<br>SPacE Improves first fix<br>For maximum<br>installation<br>raiSEd din-rail<br>flexibility<br>For improved<br>including<br>cable routing<br>acceptance of<br>STacKinG OPTiOnS availablE  control modules<br>**----- End of picture text -----**<br>


## **FlExiblE nEUTral bar cOnFiGUraTiOn** 

Enables installer to select a wide combination of protected and unprotected circuits 

**==> picture [119 x 38] intentionally omitted <==**

**----- Start of picture text -----**<br>
bacKEd OUT and caPTivE<br>cOMbi-hEad ScrEWS<br>Allows speedy installation<br>**----- End of picture text -----**<br>


## **TriPOd FixinG hOlES** 

Allow tripod fixing to cope with uneven surfaces. Hole locations allow access for cordless drills and power drivers 

## **STacKinG OPTiOnS availablE** 

For 12, 16 & 21 Module Units ideal for larger applications, or where space may be limited 

**274** Sentry 

## **The MK Electric design Service** 

The MK Electric Design Service is perfect for when only a customised solution can meet your requirements, or when fully assembled Consumer Units can be provided for your project to save you installation time. 

Our dedicated team can help you to build the best configurations for your project, and then assemble the boards ready for installation. The service is available for all MK Consumer Units – Metalclad, Insulated, Flush and Skeleton. Using standard and non-standard Sentry components we can build and supply fully assembled units to an agreed design. For example, have your split load boards supplied with all the devices pre-fitted with busbars and cables to suit the installation This service is ideal for housing developers, or any application requiring typically more than twenty units. 

- l Dedicated team on hand to build configuration to meet your needs 

- l Service is available for all MK Consumer Units and Skeleton Units 

- l Ideal for housing developments, or any application requiring typically more than 20 units l Faster installation time on site 

- l Fast turnaround – 1 working day response time to initial enquiry 

**To find out more call the MK Electric Technical Services Team on 01268 563720 or visit www.mkelectric. co.uk and follow the links to the design Service.** 

|**STEP 1**|Call the MK Electric Technical Services Team on 01268 563720**or**visit www.mkelectric.co.uk and follow the<br>links to the Design Service|
|---|---|
|**STEP 2**|Discuss the details of your project and Circuit Protection requirements with a member of the MK Technical<br>Services Team**or**complete the online enquiry and click send|
|**STEP 3**<br>~~|~~|Within one working day you will have a response to your initial enquiry<br>~~rr.~~|
|**STEP 4**|Confirm the configurations and quantities<br>‘abate“EE|
|**STEP 5**|Receive the quote for your order<br>‘a bate “EE|
|**STEP 6**|Place your order with your wholesaler<br>"]|
|**STEP 7**|Your order will be delivered to the wholesaler of your choice. All boards will be fully assembled and ready<br>for installation|



Sentry 

**275** 

## circuit protection 

## **MK Sentry Skeleton Unit Features and benefits** 

**==> picture [483 x 594] intentionally omitted <==**

**----- Start of picture text -----**<br>
FlExiblE nEUTral bar  SUiTablE FOr USE in MOST ManTEl and<br>cOnFiGUraTiOn  cliFTOn TyPE EnclOSUrES<br>Enables a wide combination<br>of protected and<br>unprotected circuits<br>raiSEd  s\ i amr= a |7 ‘\ I<br>1 I 1 I<br>TErMinal<br>bar<br>bacKEd OUT and caPTivE  ElOnGaTEd FixinG SlOTS<br>Allows easier<br>yo cOMbi-hEad ScrEWS  ! Allows easy positioning of the<br>wiring of  I I I<br>devices into  II II Quick and easy to install I| unit within the enclosure II<br>the terminals<br>I I I I<br>~~! ——_I I, 2!I<br>oT) OD de cekeeencden<br>7 fi Og? onl . = ee.| = = ae ag Mi Nr Mag aM a Ma ig<br>Ty ak nia<br>f<br>-¢ =a |2]@' @/e/el@ elles<br>— ae = Ble | : Fi fe wae 2 in iL = 7 + i al om -<br>Beer sel<br>j 8 mieele elie]:I y |<br>Aw<br>FlOaTinG bUSbar<br>—_| O =<br>! SySTEM<br>I EaSily<br>Busbar can be cut<br>I<br>rEMOvablE<br>\ according to devices<br>din-rail<br>fitted<br>.<br>aMPlE WirinG SPacE  Improves first fix<br>Quick and easy to install<br>**----- End of picture text -----**<br>


**276** Sentry 

## **Selecting the right consumer Unit for your installation** 

## **Sentry consumer Units are designed to be fully flexible and offer a range of configurations.** 

## **independent circuit Protection** 

Boards with Switch Disconnectors and RCBOs give maximum protection and potentially less annoyance to the end user. In the event of fault conditions or nuisance tripping the disconnect will only effect the dedicated circuit. 

## **K5612SMAG** 

|**consumer unit options**|**consumer unit options**|**consumer unit options**|**consumer unit options**|
|---|---|---|---|
|Insulated|Metal|Flush|Number of ways in bare board|
|K5612sMAG|K5512sMAG|K6512sMAG|12|
|K5616sMAG|K5516sMAG|K6516sMAG|16|
|K5621sMAG|K5521sMAG|K6521sMAG|21|



## **Typical Enclosure configuration** 

|**SWiTch**|RCBO|RCBO|RCBO|RCBO|RCBO|RCBO|RCBO|RCBO|RCBO|RCBO|
|---|---|---|---|---|---|---|---|---|---|---|
||Shower|Sockets<br>Upstairs|Sockets<br>Downstairs|Cooker|Outside<br>Sockets|Immersion<br>Heater|Lighting<br>Upstairs|Lighting<br>Downstairs|Burglar<br>Alarm|Smoke<br>Alarm|



## **Split load configurations, up to half independent circuits** 

Split load boards with RCDs, MCBs and RCBOs are ideal for protection of key designated circuits, for example upstairs lighting, downstairs lighting, smoke alarms and showers. Configurations shown include a Switch and RCD, with a further 8 and 12 ways respectively. 

## **K5686SMAG17ED** 

|**consumer unit options**|**consumer unit options**|**consumer unit options**|
|---|---|---|
|Insulated|Metal|Number of ways in bare board|
|K5682sMAG17ED|K5582sMAG17ED|8|
|K5686sMAG17ED|K5586sMAG17ED|12|
|K5681sMAG17ED|K5581sMAG17ED|17|



## **Some Examples of 8 way configurations** 

|**SWiTch**|RCBO||RCD|RCD||||MCB|||MCB|MCB|MCB|MCB|MCB|SPARE|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|**SWiTch**|RCBO|RCBO||||RCD|||||MCB|MCB|MCB|MCB|MCB|SPARE|
|**SWiTch**|RCBO|RCBO|||RCBO||||RCD|||MCB|MCB|MCB|MCB|MCB|



Sentry 

**277** 

circuit protection 

## **dual rcd Protection, with some independent circuits** 

Dual RCD boards with MCB’s and RCBOs give both general and essential protection. The configurations shown include a Switch and 2 RCDs, with a further 10 and 15 ways respectively. 

**K5681SMAG17ED** 

|**consumer unit options**|**consumer unit options**|**consumer unit options**|
|---|---|---|
|Insulated|Metal|Number of ways in bare board|
|K5666sMAG17ED|K5566sMAG17ED|10|
|K5686sMAG17ED|K5586sMAG17ED|10|
|K5681sMAG17ED|K5581sMAG17ED|15|
|K5683sMAG17ED|K5583sMAG17ED|15|



**Some Examples of 10 way configurations SWiTch** RCBO RCD MCB MCB MCB MCB MCB RCD MCB MCB MCB MCB ~~ce~~ **SWiTch** RCBO RCBO RCD MCB MCB MCB MCB MCB RCD MCB MCB MCB ~~ce~~ **SWiTch** RCD MCB MCB MCB MCB MCB RCD MCB MCB MCB MCB MCB ~~eee~~ 

**Some Examples of 15 way configurations SWiTch** RCBO RCBO RCD MCB MCB MCB MCB MCB MCB MCB MCB RCD MCB MCB MCB MCB MCB ~~eee~~ **SWiTch** RCBO RCD MCB MCB MCB MCB MCB MCB MCB MCB MCB MCB RCD MCB MCB MCB MCB ~~ee~~ **SWiTch** RCD MCB MCB MCB MCB MCB MCB MCB MCB MCB MCB RCD MCB MCB MCB MCB MCB ~~eee~~ 

These are some examples of Standard, Neutral and Earth bar configurations. Additional labelling is included in the box to allow for further alternatives 

**TErMinal bar cOnFiGUraTiOn** ~~a~~ **Modules Empty Earth Terminals neutral Terminals Total Ways Unprotected rcd1 rcd2 rcd3** ~~a~~ **circuits bond Total Separate blocks** ~~a~~ K5604sMAG 4 4 1 4 1 2 2 n/a n/a n/a ~~a~~ K5608sMAG 8 8 2 8 1 10 6 n/a n/a n/a ~~a~~ K5612sMAG 12 12 3 15 6 + 9 8 3 or 10* 8 n/a n/a ~~a~~ K5616sMAG 16 14 3 19 6 + 7 + 6 16 2 or 7 or 14* 5 5 n/a 2 or 7 or 12 or K5621sMAG 21 18 3 27 7 + 7 + 7+ 6 21 5 5 3 ~~eee eee~~ 18* ~~a~~ K5504sMAG 4 4 1 4 1 2 2 n/a n/a n/a ~~a~~ K5508sMAG K6508sMAG 8 8 2 8 1 6 6 n/a n/a n/a ~~a~~ K5512sMAG K6512sMAG 12 12 3 15 6 + 9 8 3 or 10* 8 n/a n/a ~~a~~ K5516sMAG K6516sMAG 16 14 3 19 6 + 7 + 6 16 2 or 7 or 14* 5 5 n/a 2 or 7 or 12 or K5521sMAG K6521sMAG 21 18 3 27 7 + 7 + 7+ 6 21 5 5 3 18* ~~ee~~ * Dependant on RCDs fitted ~~aee ee ee~~ 

Note: Additional Terminal labels supplied on main sheet to support alternative terminal configurations 

**278** Sentry 

||**Switch**||**MCB**||**RCBo**||**Residential**|||**Industrial**||
|---|---|---|---|---|---|---|---|---|---|---|---|
||**Disconnector**||**Single**||**with Solid**||**6kA RCD**|||**10kA RCD**||
||||**Pole**||**neutral**||**230v**|||**110v**||
||||**Type B**|**Type C**|**Type B**||**Double Pole**|||**Double Pole**||
||||||**30mA**||**30mA**|**100mA**|**300mA**|**10mA**|**30mA**|
||**Two**||**one**|**one**|**one**||**Two**|**Two**|**Two**|**Two**|**Two**|
||BE|||||||||||:|||
|**RATIng**||||||||||||
|**3A**|||**5903s**|**8703s**||||||||
|**6A**|||**5906s**|**8706s**|**7932s**|||||||
|**10A**|||**5910s**|**8710s**|**7933s**|||||||
|**16A**|||**5916s**|**8716s**|**7934s**||**7816s**|||**6016s**|**6416s**|
|**20A**|||**5920s**|**8720s**|**7935s**|||||||
|**25A**|||**5925s**|**8725s**||||||||
|**32A**|||**5932s**|**8732s**|**7936s**||**7832s**||||**6032s**|
|**40A**|||**5940s**|**8740s**|**7937s**||**7840s**|||||
|**45A**|||**5945s**||**7938s**|||||||
|**50A**|||**5950s**|**8750s**|**7939s**|||||||
|**63A**|**5560s**||||||**7860s**|**7560s**|**7660s**|||
|**80A**|||||||**7880s**|**7580s**|**7680s**||**6080s**|
|**100A**|**5500s**|||||||||||



**TO bUild a SPliT lOad rcd cOnSUMEr UniT WiTh rcbOS e.g. 3+5 split-load requires: K5612sMaG** Insulated Consumer Unit, 12 Mod **K5563s** Split Load Cable Kit **5500s** Switch Disconnector **5780s** RCD, 80A 30mA Select up to 3 RCBOs and 5 MCBs. 

Sentry 

**279** 

circuit protection 

|**Industrial**||||**Industrial**|**Industrial**|||**Industrial**|**Industrial**|**note: only suitable as**|**note: only suitable as**||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|**10kA RCD**||||**10kA RCD**||||**10kA RCD**|**10kA RCD**|**standalone devices, in Sentry**||**standalone devices, in Sentry**|
|**230v**||||**Pulsating DC Fault**||**Pulsating DC Fault**||**Time Delayed**|**230/400v**|**four module enclosures and**|||
|**Double Pole**||||**Current Sensitive**||||**230v**|**Four Pole**|**Commando Combi**|||
|||||||||**Double Pole**|||||
|**10mA**|**30mA**|**100mA**|**300mA**||**10mA**|**30mA**||**100mA**|**30mA**|**100mA**|**300mA**||
|**Two**|**Two**|**Two**|**Two**||**Two**|**Two**||**Two**|**FouR**|**FouR**|**FouR**||
|an.<br>t<br>i<br>I<br>I|||||Leal||i|De)<br>t<br>j<br>||||||
|||||||||||||**RATIng**|
|||||||||||||**3A**|
|||||||||||||**6A**|
|||||||||||||**10A**|
|**6316s**|**5716s**|||**6216s**||**6716s**||||||**16A**|
|||||||||||||**20A**|
||||||||||**6425s**|||**25A**|
||**6730s**|||||**6630s**||||||**32A**|
||**5740s**|||||**5640s**|||**6440s**|**6240s**||**40A**|
|||||||||||||**45A**|
|||||||||||||**50A**|
||**5760s**|**6160s**|**5860s**|||**5660s**|||**6463s**|**6363s**|**6263s**|**63A**|
||**5780s**|**6180s**|**5880s**|||||**6980s**||||**80A**|
||**7700s**|**6600s**|**7800s**|||||**6400s**||||**100A**|



**TO bUild a dUal rcd cOnSUMEr UniT e.g. 2 + 3 + 5 split-load requires: K5616sMaG** Insulated Consumer Unit, 12 Mod **K5568s** Split Load Cable Kit twin RCD arrangement **5500s** Switch Disconnector **5780s** RCD, 80A 30mA **5760s** RCD, 63A 30mA Select up to 10 MCBs. 

**280** Sentry 

## **Consumer units** 

## **Stacking Kits** 

## METAL SURFACE 

FOR METAL AND INSULATED CONSUMER UNITS 

**==> picture [417 x 105] intentionally omitted <==**

**----- Start of picture text -----**<br>
K5504sMAG K5512sMAG K5521sMAG A <<br>K6063sMAG<br>K5508sMAG K5516sMAG<br>**----- End of picture text -----**<br>


K5561s 

## **K5504sMAG** 

aCCePtS 4 

one moDule PRoDuCtS (1 inteGRal neutRal BaR) 

## **K5508sMAG** 

aCCePtS 8 one moDule PRoDuCtS (1 inteGRal neutRal BaR) 

all units are magnolia coloured. all units feature an enclosure box of welded construction finished in a tough coating of polyester epoxy paint containing ample knockouts in top, bottom, side and rear surfaces. 

the units have an impact resistant, flame retardant, thermoplastic cover and lid. Dual rail units are available for the 12, 16 and 21 module units to enable single tariff and split load (up to 80a) using Stacking Kits K6061smaG, K6062smaG and K6063s maG respectively in between the units. 

Degree of Protection to BS en 60529 to iP2x C 

Precautions must be taken to maintain the iP rating, e.g. use of cable glands and knockouts BS en 60439-3: 1999 

## **K5512sMAG** 

aCCePtS 12 

one moDule PRoDuCtS (2 inteGRal neutRal BaRS FitteD witH linK) 

## **K5516sMAG** 

aCCePtS 16 one moDule PRoDuCtS (3 inteGRal neutRal BaRS FitteD witH linK) 

DimenSionS: 

wiDtH HeiGHt DePtH K5504smaG: 140  x  230  x  110mm K5508smaG: 234  x  230  x  110mm K5512smaG: 306  x  230  x  110mm K5516smaG: 378  x  230  x  110mm K5521smaG: 468  x  230  x  110mm 

thickness of all Stacking Kits: 15mm main incomer maximum rating K5604smaG and K5504smaG: 63a all other consumer units: 100a 

Cover mounted blanks are supplied with all consumer units (2 off x 1 for 4, 8 and 12 module and 2 off x 2 for 16 and 21 module) 

## **K5521sMAG** 

aCCePtS 21 

one moDule PRoDuCtS (4 inteGRal neutRal BaRS FitteD witH linKS) 

## **K6061sMAG** 

SuitaBle FoR uSe witH 12 moDule unitS 

**K6062sMAG** SuitaBle FoR uSe witH 16 moDule unitS 

**K6063sMAG** 

SuitaBle FoR uSe witH 21 moDule unitS 

**K5561s** CaBle Kit FoR StaCKeD SentRy unitS 

Dual Rail unitS Can Be CReateD uSinG 12. 16 anD 21 moDule unitS anD tHe aPPRoPRiate StaCKinG Kit. 

ideal for large applications or if additional capacity is required or for dual tariff applications. 

K6061smaG, K6062smaG, K6063smaG enables two consumer units to be stacked (joined together) to form one integral consumer unit. includes frame nuts, bolts and earth cable (for bonding earth terminal bars together). 

Knockout holes in the base and top of consumer units align, allowing cables to pass through easily. 

K5561s 

includes 3 cables (2 neutral and 1 live) for use when electronically connecting the upper and lower units of a stacking assembly for either main incomer or split load arrangements. 

assembly using a stacking kit 

this kit must be used to ensure compliance with BS en 60439-3: 1999 . 

Sentry 

**281** 

circuit protection 

technical hotline +44 (0)1268 563720 ee 

## **Consumer units** 

## INSULATED SURFACE 

**==> picture [414 x 200] intentionally omitted <==**

**----- Start of picture text -----**<br>
METAL<br>FLUSH<br>K5604sMAG K5612sMAG K6508sMAG K6516sMAG<br>K5608sMAG K5616sMAG K6512sMAG K6521sMAG<br>**----- End of picture text -----**<br>


**==> picture [38 x 6] intentionally omitted <==**

**----- Start of picture text -----**<br>
K5621sMAG<br>**----- End of picture text -----**<br>


## **K6508sMAG** 

## **K5604sMAG** 

## **K5612sMAG** 

aCCePtS 8 

aCCePtS 4 

aCCePtS 12 

one moDule PRoDuCtS (1 inteGRal neutRal BaR) 

one moDule PRoDuCtS (1 inteGRal neutRal BaR) 

one moDule PRoDuCtS (2 inteGRal neutRal BaRS FitteD witH linK) 

## **K6512sMAG** 

## **K5608sMAG** 

aCCePtS 12 

## **K5616sMAG** 

aCCePtS 8 one moDule PRoDuCtS aCCePtS 16 (1 inteGRal neutRal BaR) one moDule PRoDuCtS (3 inteGRal neutRal BaRS FitteD witH linK) 

one moDule PRoDuCtS (2 inteGRal neutRal BaRS FitteD witH linK) 

**K5621sMAG** all units feature a tough galvanised metal box for insertion into the wall cavity, aCCePtS 21 which can be secured at the rear or panelone moDule PRoDuCtS mounted using the brackets supplied. (4 inteGRal neutRal BaRS the Din rail embodies a useful alignment FitteD witH linKS) adjusting mechanism to make for a speedy installation. the units have an impact resistant, flame retardant, thermoplastic Degree of protection to BS en 60529 to cover, lid and a flush moulded frame is iP2xC. supplied to overlap the exposed cavity to Precautions must be taken to maintain produce a smooth line between unit and wall. 

all units are magnolia coloured. 

all units feature a robust base together with an all over front cover and moulded lid in an impact resistant, flame retardant thermoplastic. Cable entry points are located on top, bottom, side and rear surfaces. DimenSionS: 

Degree of protection to BS en 60529 to iP2xC. 

wiDtH HeiGHt DePtH K5604smaG: 140  x  230  x  110mm Precautions must be taken to maintain the iP rating, e.g. use of cable glands and K5608smaG: 234  x  230  x  110mm knockouts. K5612smaG: 306  x  230  x  110mm BS en 60439-3: 1999 K5616smaG: 378  x  230  x  110mm K5621smaG: 468  x  230  x  110mm 

Degree of protection to BS en 60529 to iP2xC. 

Precautions must be taken to maintain the iP rating, e.g. use of cable glands and knockouts. 

main incomer maximum rating K5604smaG and K5504smaG: 63a 

FaCtoRy Built SeRViCe Cover mounted blanks are supplied mK can save you time and money by with all consumer units pre-assembling Consumer units (2 off x 1 for 4, 8 and 12 module and with your required Sentry components 2 off x 2 for 16 and 21 module) a 

all other consumer units: 100a 

## **K6516sMAG** 

aCCePtS 16 

one moDule PRoDuCtS (3 inteGRal neutRal BaRS FitteD witH linK) 

**K6521sMAG** aCCePtS 21 one moDule PRoDuCtS (4 inteGRal neutRal BaRS FitteD witH linKS) 

BS en 60439-3: 1999 DimenSionS: wiDtH HeiGHt DePtH K6508smaG: 234  x  230  x  106.5mm K6512smaG: 306  x  230  x  106.5mm K6516smaG: 378  x  230  x  106.5mm K6521smaG: 468  x  230  x  106.5mm Flush frame adds 38mm per side to the unit wall CaVity DimenSionS: wiDtH HeiGHt DePtH (min) K6508smaG: 245  x  235  x  67mm K6512smaG: 315  x  235  x  67mm K6516smaG: 390  x  235  x  67mm K6521s:maG 480  x  235  x  67mm Depth of flush consumer unit visible on wall: 50mm 

**282** - Sentry ) circuit protection www.mkelectric.co.uk hee 

## **Consumer units** 

wITH SPLIT-LOAD SINGLE RCD ARRANGEMENTS METAL SURFACE 

wITH SPLIT-LOAD SINGLE RCD ARRANGEMENTS INSULATED SURFACE 

K5582sMAG K5586sMAG K5682sMAG K5686sMAG ~~~ K5566sMAG K5581sMAG K5662sMAG K5681sMAG a — K5666sMAG 

## **K5582sMAG K5586sMAG** 

100a SwitCH DiSConneCtoR anD 80a 30ma RCD. aCCePtS a FuRtHeR 12 one moDule PRoDuCtS in any ConFiGuRation oF RCD PRoteCteD anD unPRoteCteD CiRCuitS Between 1/8 anD 8/1 

100a SwitCH DiSConneCtoR anD 63a 30ma RCD. aCCePtS a FuRtHeR 8 one moDule PRoDuCtS in any ConFiGuRation oF RCD PRoteCteD anD unPRoteCteD CiRCuitS Between 1/6 anD 6/1 

## **K5566sMAG K5581sMAG** 

100a SwitCH DiSConneCtoR anD 100a SwitCH DiSConneCtoR anD 63a 30ma RCD. aCCePtS a FuRtHeR 12 80a 30ma RCD. aCCePtS a FuRtHeR 17 one moDule PRoDuCtS in any one moDule PRoDuCtS in any ConFiGuRation oF RCD PRoteCteD anD ConFiGuRation oF RCD PRoteCteD anD unPRoteCteD CiRCuitS Between unPRoteCteD CiRCuitS Between 1/8 anD 8/1 1/14 anD 14/1 

all units are magnolia coloured. Degree of Protection to all units are pre-fitted with a switch BS en 60529 to iP2xC disconnector and RCD together with all Precautions must be taken to maintain necessary split-load cabling. the flexibility of the iP rating e.g. use of cable glands and design allows the RCD to be positioned to suit knockouts the required configuration of RCD protected and non-protected circuits, subject to the BS en 60439-3: 1999 rating of either the switch or RCD not being exceeded. mK recommends the use of RCBoS for non RCD protected circuits to comply with the 17th edition of the wiring Regulations. 

DimenSionS: wiDtH HeiGHt DePtH K5582smaG: 306  x  230  x  110mm Cover mounted blanks are supplied K5566smaG: 378  x  230  x  110mm with all consumer units K5586smaG: 378  x  230  x  110mm (2 off x 1 for 4, 8 and 12 module and K5581smaG: 468 x 230 x 110mm 2 off x 2 for 16 and 21 module) 

## **K5682sMAG** 

100a SwitCH DiSConneCtoR anD 63a 30ma RCD. aCCePtS a FuRtHeR 8 one moDule PRoDuCtS in any ConFiGuRation oF RCD PRoteCteD & unPRoteCteD CiRCuitS Between 1/6 anD 6/1 

## **K5662sMAG** 

100a SwitCH DiSConneCtoR anD 80a 30ma RCD. aCCePtS a FuRtHeR 8 one moDule PRoDuCtS in any ConFiGuRation oF RCD PRoteCteD & unPRoteCteD CiRCuitS Between 1/6 anD 6/1 

## **K5666sMAG** 

100a SwitCH DiSConneCtoR anD 63a 30ma RCD. aCCePtS a FuRtHeR 12 one moDule PRoDuCtS in any ConFiGuRation oF RCD PRoteCteD & unPRoteCteD CiRCuitS Between 1/8 anD 8/1 

all units are magnolia coloured. all units are pre-fitted with a switch disconnector and RCD together with all necessary split load cabling. the flexibility of design allows the RCD to be positioned to suit the required configuration of RCD protected and non-protected circuits, subject to the rating of either the switch or RCD not being exceeded. mK recommends the use of RCBoS for non RCD protected circuits to comply with the 17th edition of the wiring Regulations. 

## **K5686sMAG** 

100a SwitCH DiSConneCtoR anD 80a 30ma RCD. aCCePtS a FuRtHeR 12 one moDule PRoDuCtS in any ConFiGuRation oF RCD PRoteCteD & unPRoteCteD CiRCuitS Between 1/8 anD 8/1 

## **K5681sMAG** 

100a SwitCH DiSConneCtoR anD 80a 30ma RCD. aCCePtS a FuRtHeR 17 one moDule PRoDuCtS in any ConFiGuRation oF RCD PRoteCteD & unPRoteCteD CiRCuitS Between 14/1 anD 1/14 

DimenSionS: wiDtH HeiGHt DePtH K5682smaG: 306 x 230 x 110mm K5662smaG: 306 x 230 x 110mm K5666smaG: 378 x 230 x 110mm K5686smaG: 378 x 230 x 110mm K5681smaG: 468 x 230  x 110mm Degree of protection to BS en 60529:1992 iP2xC Precautions must be taken to maintain the iP rating. eg. correct use of cable glands and knockouts BS en 60439-3: 1999 

FaCtoRy Built SeRViCe mK can save you time and money by pre-assembling Consumer units with your required Sentry components 

Sentry 

**283** 

circuit protection 

wITH SPLIT LOAD wITH SPLIT LOAD DUAL/TRIPLE RCD DUAL/TRIPLE RCD ARRANGEMENT ARRANGEMENT METAL INSULATED SURFACE SURFACE 

**==> picture [436 x 168] intentionally omitted <==**

**----- Start of picture text -----**<br>
K5566sMAG17ED K5581sMAG17ED K5666sMAG17ED K5688sMAG17ED<br> —————<br>K5586sMAG17ED K5583sMAG17ED K5686sMAG17ED K5687sMAG17ED<br>i [ual]<br>SS—<br>K5584sMAG17ED<br>**----- End of picture text -----**<br>


## **K5566sMAG17ED** 

100a SwitCH DiSConneCtoR anD 2 x 63a 30ma RCDS. aCCePtS a FuRtHeR 10 one moDule PRoDuCtS * 

## **K5586sMAG17ED** 

100a SwitCH DiSConneCtoR 80a anD 63a 30ma RCDS. aCCePtS a FuRtHeR 10 one moDule PRoDuCtS * 

## **K5581sMAG17ED** 

100a SwitCH DiSConneCtoR, 80a anD 63a 30ma RCDS. aCCePtS a FuRtHeR 15 one moDule PRoDuCtS * 

## **K5583sMAG17ED** 

100a SwitCH DiSConneCtoR anD 2 x 63a 30ma RCDS. aCCePtS a FuRtHeR 15 one moDule PRoDuCtS * 

## **K5666sMAG17ED** 

100a SwitCH DiSConneCtoR anD 2 x 63a 30ma RCDS. aCCePtS a FuRtHeR 10 one moDule PRoDuCtS * 

## **K5686sMAG17ED** 

100a SwitCH DiSConneCtoR 80a anD 63a 30ma RCDS. aCCePtS a FuRtHeR 10 one moDule PRoDuCtS * 

## **K5688sMAG17ED** 

100a SwitCH DiSConneCtoR anD 2 x 80a 30ma RCDS. aCCePtS a FuRtHeR 10 one moDule PRoDuCtS * 

## **K5687sMAG17ED** 

100a SwitCH DiSConneCtoR anD 2 x 80a 30ma RCDS. aCCePtS a FuRtHeR 15 one moDule PRoDuCtS* 

**K5584sMAG17ED** 

100a SwitCH DiSConneCtoR, 2 x 63a anD one 40a 30ma RCDS. aCCePtS a FuRtHeR 13 one moDule PRoDuCtS * 

all units are magnolia coloured. all units are pre-fitted with a switch disconnector and either two or three RCDs together with all necessary split-load cabling. all units have the capacity to substitute Protected with unprotected circuits for use with fridges, freezers, burglar alarms and other critical circuits. mK recommends the use of RCBoS for non RCD protected circuits to comply with the 17th edition of the wiring Regulations. 

all units are magnolia coloured. all units are pre-fitted with a switch disconnector and *For potential either two or three RCDs together with all necessary split-load cabling. all units have configurations, please the capacity to substitute Protected with unprotected circuits for use with fridges, refer to pages 276-277 freezers, burglar alarms and other critical circuits. mK recommends the use of RCBoS for non RCD protected circuits to comply with the 17th edition of the wiring Regulations. 

DimenSionS: wiDtH HeiGHt DePtH K5566smaG17eD: 378 x 230 x 110mm K5586smaG17eD: 378 x 230 x 110mm Degree of Protection to DimenSionS: K5581smaG17eD: 468 x 230 x 110mm BS en 60529 to iP2xC wiDtH HeiGHt DePtH K5681smaG17eD: 468 x 230 x 110mm K5583smaG17eD: 468 x 230 x 110mm Precautions must be taken to maintain the iP K5666smaG17eD: 378 x 230 x 110mm K5687smaG17eD: 468 x 230 x 110mm K5584smaG17eD: 468 x 230 x 110mm rating e.g. use of cable glands and knockouts K5686smaG17eD: 378 x 230 x 110mm K5683smaG17eD: 468 x 230 x 110mm K5687smaG17eD: 468 x 230 x 110mm BS en 60439-3: 1999 K5688smaG17eD: 378 x 230 x 110mm K5684smaG17eD: 468 x 230 x 110mm 

**284** Sentry 

**==> picture [80 x 10] intentionally omitted <==**

**----- Start of picture text -----**<br>
Consumer units<br>**----- End of picture text -----**<br>


## **Skeleton units** 

**==> picture [96 x 12] intentionally omitted <==**

**----- Start of picture text -----**<br>
garage/Shower Kits<br>**----- End of picture text -----**<br>


**==> picture [155 x 31] intentionally omitted <==**

**----- Start of picture text -----**<br>
FOR MOUNTING IN A<br>MANTEL/CLIFTON TyPE<br>ENCLOSURE  IP65<br>**----- End of picture text -----**<br>


**==> picture [458 x 184] intentionally omitted <==**

**----- Start of picture text -----**<br>
K6000s<br>K5681sMAG17ED K5683sMAG17ED<br>| pean poem<br>5702sP1<br>K5684sMAG17ED K6001s<br>5702sP2<br>Both K6000s and K6001s are supplied<br>with a 2 piece cover<br>**----- End of picture text -----**<br>


## **K5681sMAG17ED** 

100a SwitCH DiSConneCtoR, 80a anD 63a 30ma RCDS. aCCePtS a FuRtHeR 15 one moDule PRoDuCtS* 

## **K5683sMAG17ED** 

100a SwitCH DiSConneCtoR anD 2 x 63a 30ma RCDS. aCCePtS a FuRtHeR 15 one moDule PRoDuCtS* 

## **K5684sMAG17ED** 

100a SwitCH DiSConneCtoR, two 63a anD one 40a 30ma RCDS. aCCePtS a FuRtHeR 13 one moDule PRoDuCtS* 

**K6000s** 

inCluDeS 1 x 100a SwitCH DiSConneCtoR aCCePtS a FuRtHeR 12 one moDule PRoDuCtS in any ConFiGuRation oF RCD PRoteCteD anD unPRoteCteD CiRCuitS Between 2/10 anD 10/2 (note RCDS taKe two SPaCeS) 1 inteGRal neutRal BaR 

**K6001s** 

inCluDeS 1 x 100a SwitCH DiSConneCtoR anD 1 x 63a 30ma RCD aCCePtS a FuRtHeR 10 one moDule PRoDuCtS in any ConFiGuRation oF RCD PRoteCteD anD unPRoteCteD CiRCuitS Between 2/8 anD 8/2 (note RCDS taKe two SPaCeS) 

## **5702sP1** 

inSulateD 4 moDule iP65 GaRaGe Kit. ComPlete witH 40a 30ma RCD anD 2 x mCB (1 x B tyPe 6a, 1 x B tyPe 16a) 

## **5702sP2** 

inSulateD 4 moDule iP65 SHoweR Kit. ComPlete witH 63a 30ma RCD anD 1 x 50a mCB 

*For potential configurations, please refer to pages 276-277 

Degree of Protection to BS en 60529 to iP2xC Precautions must be taken to maintain the iP rating e.g. use of cable glands and knockouts BS en 60439-3: 1999 

Degree of Protection to BS en 60529 to iP2xC Precautions must be taken to maintain the iP rating e.g. use of cable glands and knockouts BS en 60439-3: 1999 

DimenSionS: 

wiDtH HeiGHt DePtH K5681smaG17eD: 468 x 230 x 110mm K5666smaG17eD: 378 x 230 x 110mm K5687smaG17eD: 468 x 230 x 110mm K5686smaG17eD: 378 x 230 x 110mm K5683smaG17eD: 468 x 230 x 110mm K5688smaG17eD: 378 x 230 x 110mm K5684smaG17eD: 468 x 230 x 110mm 

these units are suitable for use in most mantel and Clifton type enclosures. Factory assembled units are available for specific installations. 

DimenSionS witH CoVeR: 

wiDtH HeiGHt DePtH 

K6000s: 333 x 216 x 65mm K6001s: 333 x 216 x 65mm Degree of Protection to BS en 60529:1992 iP30 

Precautions must be taken to maintain the iP rating, eg. correct use of cable glands and knockouts. 

BS en 60439-3:1999 

DimenSionS: 

wiDtH HeiGHt DePtH 5702sP1:  123 x  200 x 112mm 5792sP2:  123 x  200 x 112mm 

Sentry 

**285** 

## circuit protection 

## **enclosures** 

**Switch Disconnectors Double Pole** 

**MCBs Single Pole** 

IP65 wEATHERPROOF ENCLOSURE IP30 ENCLOSURE 

TyPE B TwO MODULE ONE MODULE 

5502s 5702s 5500s 5903s 5906s 5920s 5940s . oe © eo ee e¢ 5504s oO 3 win nw 5704s oO ¢ e@ e|e e | 5604s 5560s 5910s 5916s 5945s 5950s **5502s 5500s 5903s 5920s** 1 | 1| inSulateD ComPlete witH 100a 230V 3a 230V 20a 230V mountinG Rail, neutRal anD eaRtH teRminalS **5560s 5906s 5925s** two moDule 63a 230V 6a 230V 25a 230V ul **5504s** m1] **5910s 5932s** metal 10a 230V 32a 230V witH mountinG Rail, **5916s 5940s** eaRtH teRminalS anD 16a 230V 40a 230V moulDeD FRont Plate FouR moDule **5945s 5604s** " 45a 230V inSulateD **5950s** witH mountinG Rail, 50a 230V 

## **5702s** 

weatHeRPRooF ComPlete witH neutRal anD eaRtH teRminal BloCK aCCePtS uP to 4 moDuleS 

## **5704s** 

weatHeRPRooF ComPlete witH neutRal anD eaRtH teRminal BloCK aCCePtS uP to 8 moDuleS 

> **5604s** " inSulateD witH mountinG Rail, two inteGRal BlanKinG PlateS anD tamPeR-PRooFinG ComPonentS FouR moDule 

Suitable for installation Suitable for installation in Sentry Consumer units in Sentry Consumer units and two or four module and two or four module enclosures. enclosures. 

Suitable for installation in Sentry Consumer units and two or four module enclosures. accepts direct to busbar or cable-in / cable-out connection. Category of duty: aC22a for switching of resistive and inductive loads. 

typical applications for enclosures are house extensions, garages and small workshops. these enclosures will accommodate two or four module Sentry RCDs or a combination of Sentry modules, excluding contactors and RCBos. DimenSionS: wiDtH HeiGHt DePtH 5702S: 123 x 200 x 112mm 5704S: 195 x 200 x 112mm 5502S: 130 x 90 x 90mm 5504S: 188 x 121 x 74mm 5604S: 150 x 110 x 90mm 

Positive contact status Positive contact status indication in accordance indication in accordance with 17th edition iee with 17th edition iee wiring Regulations wiring Regulations (537.2.2.2 and 537.3.2.2) (537.2.2.2 and 537.3.2.2) DimenSionS: DimenSionS: 83 x 18 x 74mm 83 x 18 x 74mm 

Degree of Protection to BS en 60529:1992 5702s: iP65 5704s: iP65 5502s: iP30 5504s: iP30 5604s: iP30 

Positive contact status indication in accordance with 17th edition iee wiring Regulations (537.2.2.2 and 537.3.2.2) DimenSionS: 81 x 36 x 76mm 

CaBle CaPaCity: CaBle CaPaCity: 3, 6, 10, 16a: 35mm[2] 20, 32, 40, 50a : 35mm[2] Short-circuit breaking Short-circuit breaking capacity: 6Ka capacity: 6Ka BS en 60898: 2003 BS en 60898: 2003 

Precautions must be taken to maintain the iP rating, eg. correct use of cable glands and knockouts iP65 enclosures to en 60670 

CaBle CaPaCity: 50mm[2] BS en 60947-3: 1999 

**286** Sentry 

## **MCB Single Pole** 

## **RCBos with Solid neutral Single Pole** 

**Residential 6kA RCD Double Pole** 

## TyPE C ONE MODULE 

TyPE B ONE MODULE 

16 AMP 32 AMP 40 AMP TwO MODULE TwO MODULE TwO MODULE 

8703s 8706s 8720s 8732s 7932s 7933s 7934s 7935s 7816s 7832s 7840s GHAR EEEcinch s: r] a P| | | ce) elle e¢ % F FF 8710s 8716s 8740s 8750s 7936s 7937s 7938s 7939s 

**8703s 8720s 7932s 7935s 7816s 7832s 7840s** 3a 230V 20a 230V 6a 230V 20a 230V 16a 230V 32a 230V 40a 230V 30ma 30ma tRiPPinG CuRRent 30ma tRiPPinG CuRRent 30ma tRiPPinG CuRRent 30ma tRiPPinG CuRRent **8706s 8725s** tRiPPinG CuRRent 6a 230V 25a 230V **7936s 7933s** 32a 230V **8710s 8732s** 10a 230V 30ma tRiPPinG CuRRent 10a 230V 32a 230V 30ma **8716s 8740s** tRiPPinG CuRRent **7937s** 40a 230V 16a 230V 40a 230V **7934s** 30ma tRiPPinG CuRRent **8750s** 16a 230V   30ma **7938s** 50a 230V tRiPPinG CuRRent 45a 230V 30ma tRiPPinG CuRRent **7939s** 50a 230V 30ma tRiPPinG CuRRent 

Suitable for installation in Suitable for installation Suitable for installation Sentry Consumer units. in Sentry Consumer units in Sentry Consumer units and two or four module and two or four module Positive contact status enclosures. enclosures. indication in accordance with 17th edition iee Positive contact status Positive contact status indication in accordance indication in accordance wiring Regulations with 17th edition iee with 17th edition iee (537.2.2.2 and 537.3.2.2) wiring Regulations wiring Regulations DimenSionS: (537.2.2.2 and 537.3.2.2) (537.2.2.2 and 537.3.2.2) 119 x 18 x 73mm 

Positive contact status Positive contact status indication in accordance indication in accordance with 17th edition iee with 17th edition iee wiring Regulations wiring Regulations (537.2.2.2 and 537.3.2.2) (537.2.2.2 and 537.3.2.2) DimenSionS: DimenSionS: 83 x 18 x 74mm 83 x 18 x 74mm 

CaBle CaPaCity: live 25mmneutral 25mm[2] ,[2] 

CaBle CaPaCity: CaBle CaPaCity: 3, 6, 10, 16a: 35mm[2] 20, 32, 40, 50a : 35mm[2] Short-circuit breaking Short-circuit breaking capacity: 6Ka capacity: 6Ka BS en 60898: 2003 BS en 60898: 2003 

Short circuit breaking capacity: 6Ka BS en 61009-1 

BS ieC61009-2-2 

Sentry 

**287** 

circuit protection 

## **Industrial 10kA RCDs Double Pole** 

63 AMP 80 AMP 16 AMP 32 AMP 40 AMP 63 AMP 80 AMP 100 AMP TwO MODULE TwO MODULE TwO MODULE TwO MODULE TwO MODULE TwO MODULE TwO MODULE TwO MODULE 

|7860s|||7880s|||6016s||6032s|||5740s||5760s|||6080s|||6600s|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|¢€||||||Ley||||||||LJ||||||LA|
|7660s|||7680s|||6316s||6730s|||||5860s|||5880s|||7800s|
|||||||||||||||||||||
|**7860s**|||**7880s**|||**6016s**||**6032s**|||**5740s**||**5760s**|||**6080s**|||**7700s**|
|63a 230V|||80a 230V|||16a 110V||32a 110V|||40a 230V||63a 230V|||80a 110V|||100a 230V|
|30ma tRiPPinG|||30ma tRiPPinG|||10ma tRiPPinG||30ma tRiPPinG|||30ma tRiPPinG||30ma tRiPPinG|||30ma tRiPPinG|||30ma tRiPPinG|
|CuRRent|||CuRRent|||CuRRent||CuRRent|||CuRRent||CuRRent|||CuRRent|||CuRRent|
|**7560s**|||**7580s**|||**6416s**||**6730s**|||||**6160s**|||**5780s**|||**6600s**|
|63a 230V|||80a 230V|||16a 110V||32a 230V|||||63a 230V|||80a 230V|||100a 230V|
|100ma|||100ma tRiPPinG|||30ma tRiPPinG||30ma tRiPPinG|||||100ma tRiPPinG|||30ma tRiPPinG|||100ma tRiPPinG|
|tRiPPinG CuRRent|||CuRRent|||CuRRent||CuRRent|||||CuRRent|||CuRRent|||CuRRent|
|**7660s**|||**7680s**|||**6316s**|||||||**5860s**|||**6180s**|||**7800s**|
|63a 230V|||80a 230V|||16a 230V|||||||63a 230V|||80a 230V|||100a 230V|
|300ma tRiPPinG|||300ma tRiPPinG|||10ma tRiPPinG|||||||300ma tRiPPinG|||100ma tRiPPinG|||300ma tRiPPinG|
|CuRRent|||CuRRent|||CuRRent|||||||CuRRent|||CuRRent|||CuRRent|
|||||||**5716s**||||||||||**5880s**||||
|||||||16a 230V||||||||||80a 230V||||
|||||||30ma tRiPPinG||||||||||300ma tRiPPinG||||
|||||||CuRRent||||||||||CuRRent||||



Suitable for installation in Sentry Consumer units and two or four module enclosures. 

Positive contact status indication in accordance with 17th edition iee wiring Regulations (537.2.2.2 and 537.3.2.2) Dimension 85 x 36 x 75mm CaBle CaPaCity: 50mm[2] 

BS en 61008: 1995 

**288** a Sentry 

**Industrial 10kA RCDs Pulsating D.C. Fault Current Sensitive Double Pole** 

## TwO MODULE 

**Industrial Industrial 10kA 10kA RCDs RCDs Time Four Pole Delayed Double Pole** 25 AMP 40 AMP TwO MODULE FOUR MODULE FOUR MODULE 

**==> picture [460 x 138] intentionally omitted <==**

**----- Start of picture text -----**<br>
6216s  6716s 5640s  6980s  6440s<br>oe ee Hd<br>_ ee lee<br>6630s  5660s  6400s<br>6425s<br>**----- End of picture text -----**<br>


**==> picture [20 x 5] intentionally omitted <==**

**----- Start of picture text -----**<br>
6240s<br>**----- End of picture text -----**<br>


**6216s 6630s 6980s 6425s** 16a 230V 32a 230V 80a 230V 25a 230/400V 10ma tRiPPinG CuRRent 30ma tRiPPinG CuRRent 100ma tRiPPinG 30ma tRiPPinG CuRRent CuRRent **6716s 5640s** time DelayeD 16a 230V 40a 230V 30ma tRiPPinG CuRRent 30ma tRiPPinG CuRRent **6400s** 100a 230V **5660s** 100ma tRiPPinG 63a 230V CuRRent 30ma tRiPPinG CuRRent time DelayeD 

## **6216s** 

**6716s** 

**6440s** 40a 230/400V 30ma tRiPPinG CuRRent **6240s** 40a 230/400V 100ma tRiPPinG CuRRent 

Suitable for installation in Sentry Consumer units and two or four module enclosures. Positive contact status indication in accordance with 17th edition iee wiring Regulations (537.2.2.2 and 537.3.2.2) DimenSionS: 85 x 36 x 75mm 

CaBle CaPaCity: 50mm[2] BS en 61008:1995 

FaCtoRy Built SeRViCe mK can save you time and money by pre-assembling Consumer units with your required Sentry components 

Suitable for installation Suitable for installation in Sentry four module in Sentry Consumer enclosures and Commando Combi. units and Four module enclosures. when Positive contact status indication in used as a mains accordance with 17th edition iee wiring incomer these units will Regulations provide discrimination (537.2.2.2 and 537.3.2.2) with downstream DimenSionS: instantaneously 85 x 72 x 75mm operating 10ma or 30 ma RCD’s. For CaBle CaPaCity: example, they can be 50mm[2] used as main incomers BS en 61008:1995 on split load consumer units where it is not required to the indirect contact desirable, because protection requirements of the of the possibility of iee wiring regulations. unwanted tripping, to place all of the circuits DimS: 81 x 36 x 76mm on an instantaneous CaBle CaPaCity: 50mm[2] 30ma RCD, but where earth leakage protection BS en 61008: 1995 is still required for not to Be uSeD FoR these circuits or PeRSonal PRoteCtion where compliance is aGainSt eleCtRiC SHoCK 

Sentry 

**289** 

circuit protection 

**Industrial 10kA RCD Pulsating D.C. Fault Current Sensitive Four Pole** 

## 63 AMP FOUR MODULE 

## FOUR MODULE 

**==> picture [155 x 6] intentionally omitted <==**

**----- Start of picture text -----**<br>
6463s  6640s<br>**----- End of picture text -----**<br>


**==> picture [20 x 5] intentionally omitted <==**

**----- Start of picture text -----**<br>
6363s<br>**----- End of picture text -----**<br>


**6463s 6640s** 1 | 1 | 63a 230/400V 40a 230/400V 30ma tRiPPinG CuRRent 30ma tRiPPinG CuRRent **6363s** 1 | Suitable for installation in Sentry two or four 63a 230/400V module enclosures. 100ma tRiPPinG CuRRent Positive contact status indication in accordance with 17th edition iee wiring Regulations **6263s** 1 | (537.2.2.2 and 537.3.2.2) 63a 230/400V DimenSionS: 300ma tRiPPinG CuRRent 85 x 72 x 75mm 

CaBle CaPaCity: 50mm[2] BS en 61008: 1995 

## **Contactors** 

## ONE MODULE TwO MODULE THREE MODULE 

**==> picture [187 x 136] intentionally omitted <==**

**----- Start of picture text -----**<br>
6220s  7240s  7440s<br>oe psa<br>6720s  7263s  7463s<br>**----- End of picture text -----**<br>


|**6220s**<br>20a<br>1 ||**6220s**<br>20a<br>1 ||**6420s**<br>20a<br>1 ||**6420s**<br>20a<br>1 ||**7440s**<br>40a|||||1||1||
|---|---|---|---|---|---|---|---|---|---|---|
|DouBle Pole||FouR Pole||FouR Pole|||||||
|**6720s**<br>20a<br>1 |||**7240s**<br>40a<br>1 |||**7463s**<br>63a|||||1|||
|DouBle Pole||DouBle Pole||FouR Pole|||||||
|witH manual<br>oVeRRiDe||**7263s**<br>63a<br>DouBle Pole<br>1||||||||||
|Suitable for installation||**ConTACToR RATIngS:**|||||||||
|in Sentry Consumer||**List no**||||**6220s**|**7240s**|**7263s**|||
|units and two or four<br>module enclosures.<br>automatically switches||||||**6420s**<br>**6720s**|**7440s**|**7463s**|||
|higher loads than||RateD CuRRentIth||||20a|40a|63a|||
|possible with a time<br>switch eg; off peak<br>tariffs.||HeatinG:  Single phase 230V<br>three phase 400V||||5.4kw<br>16kw|8.6kw<br>26kw|13.6kw<br>41kw||13.6kw|
|a manual override||motoRS:  Single phase 230V||||1.1kw|2.2kw|4kw|||
|enables the temporary||three phase 400V||||4kw|7.5kw|11kw|||
|setting of the contactor<br>in either the on or off<br>position in addition<br>to normal automatic||liGHtinG:<br>incandescent and Halogen lamps:<br>Fluorescent lamps: (electronic Ballast)||||2,800w<br>2,000w|7,000w<br>4,200w|10,000w<br>6,300w|||
|operation.||VoltaGe RatinG: (coil)||||230V 50Hz|230V 50Hz|230V 50Hz|||
|when a contactor is<br>mounted alongside an||CaBle CaPaCity:||||6mm2rigid|25mm2rigid 25mm|rigid 25mm2rigid|||
|mCB of greater than<br>10 amp current rating||BS en 61095|||||||||
|or two contractors are<br>mounted alongside an<br>mCB or side by side, it||DimenSionS:<br>6220s:  84 x 18 x 66mm   6420s:  84 x 36 x 66mm  6720s:  84 x 18 x 66mm||6220s:  84 x 18 x 66mm   6420s:  84 x 36 x 66mm  6720s:  84 x 18 x 66mm||6220s:  84 x 18 x 66mm   6420s:  84 x 36 x 66mm  6720s:  84 x 18 x 66mm|||6220s:  84 x 18 x 66mm   6420s:  84 x 36 x 66mm  6720s:  84 x 18 x 66mm|6220s:  84 x 18 x 66mm   6420s:  84 x 36 x 66mm  6720s:  84 x 18 x 66mm|
|is necessary to insert a<br>blank module between||7240s:  84 x 36 x 66mm   7263s:  84 x 36 x 66mm   7440s:  84 x 54 x 66mm||7240s:  84 x 36 x 66mm   7263s:  84 x 36 x 66mm   7440s:  84 x 54 x 66mm||7240s:  84 x 36 x 66mm   7263s:  84 x 36 x 66mm   7440s:  84 x 54 x 66mm|||7240s:  84 x 36 x 66mm   7263s:  84 x 36 x 66mm   7440s:  84 x 54 x 66mm|7240s:  84 x 36 x 66mm   7263s:  84 x 36 x 66mm   7440s:  84 x 54 x 66mm|
|them (list no.5544s)||7463s:  84 x 54 x 66mm    (including half module blank)||7463s:  84 x 54 x 66mm    (including half module blank)||7463s:  84 x 54 x 66mm    (including half module blank)|||||



6220s:  84 x 18 x 66mm   6420s:  84 x 36 x 66mm  6720s:  84 x 18 x 66mm 7240s:  84 x 36 x 66mm   7263s:  84 x 36 x 66mm   7440s:  84 x 54 x 66mm 7463s:  84 x 54 x 66mm    (including half module blank) 

**290** Sentry 

## **Bell Time Transformer Switches** 

TwO MODULE 

QUARTZ SyNCHRONOUS STABILISED SyNCHRONOUS THREE MODULE THREE MODULE ONE MODULE 

DIGITAL DIGITAL DIGITAL ONE CHANNEL ONE CHANNEL TwO CHANNEL TwO MODULE ONE MODULE TwO MODULE 

**==> picture [488 x 15] intentionally omitted <==**

**----- Start of picture text -----**<br>
5707s  5824s<br>5833s  5731s  5733s  5732s<br>5711s<br>**----- End of picture text -----**<br>


5724s 

## **5707s** 

**5824s 5833s** 24 HouR Dial 24 HouR Dial min SettinG 30 min SettinG 30 minuteS minuteS 

## **5711s** 

RatinG 1a at 8V 7 Day Dial PRimaRy min SettinG 3 HouRS 220 – 240V a.C.50Hz 

**5724s** 

24 HouR Dial min SettinG 30 minuteS 

Suitable for installation in Sentry Consumer Suitable for Din rail units and two or four mounting in Sentry module enclosures. Consumer units and Suitable for Din rail note: when installed in Suitable for Din rail two or four module enclosures. mounting in Sentry Consumer units and two a consumer unit, ensure mounting in Sentry Power reserve 150 hours or four module enclosures that output cables Consumer units or four inside the enclosures module enclosures. VoltaGe RatinG: VoltaGe RatinG: are suitable for a 230V 220-240Va.c. 50-60Hz 240V 50Hz environment, either by sleeving the bell wire to VoltaGe RatinG:  220-240Va.c. 50Hz CuRRent RatinG: Resistive load 16a CuRRent RatinG: Resistive load 16a BS 2848 or using 230V CuRRent RatinG: inductive load 4a inductive load 4a cable.Complete with terminal Resistive load 16a  inductive load 4a tungsten lamps 6a (1350w) tungsten lamps 6a (1350w) covers. also suitable for tungsten lamps 6a Fluorescent lamps 1350w Fluorescent lamps 1350w surface mounting. (1350w) Fluorescent lamps 1350w DimenSionS: DimenSionS: DimenSionS: 85 x 54 x 68mm 90 x 18 x 68mm 88 x 36 x 67mm DimenSionS: 85 x 54 x 68mm CaBle CaPaCity: CaBle CaPaCity: CaBle CaPaCity: 2 x 2.5mm[2] or 4 x 2 x 2.5mm[2] or 4 x 1 x 2.5mm[2] CaBle CaPaCity: 1.5mm[2] 1.5mm[2] 2 x 2.5mm[2] or 4 x en 61558-2-8 1.5mm[2] en 60730-2-7: 1993 en 60730-2-7: 1993 

> **5733s** a **5732s** a 24 HouR Dial 24 HouR/7 Day DiSPlay min SettinG 1 minute min SettinG 1 minute 

**5731s** 24 HouR/7 Day DiSPlay min SettinG 1 minute 

Pre-programmed with uK time and automatic Provides 50 programming summer/winter selections. Freely Pre-programmed with adjustment. selectable day grouping uK time and automatic Provides 50 programming facility. manual override, summer/winter selections. Freely winter/summer time adjustment. selectable day grouping adjustment, holiday Provides 50 programming facility. manual override, programme and random selections. Freely selectable winter/summer time adjustment. generator are standard facilities. day grouping facility. manual override, winter/ Power reserve of 3 years. Power reserve of 150 summer time adjustment. Suitable for Din-rail hours. Power reserve of 3 years. mounting in Sentry Suitable for Din rail Suitable for Din-rail Consumer units and mounting in Sentry mounting in Sentry two or four module Consumer units and two Consumer units and two enclosures. or four module enclosures or four module enclosures. 

VoltaGe RatinG: VoltaGe RatinG: VoltaGe RatinG: 240V 50/60Hz 240V 50/60Hz 240V 50/60Hz CuRRent RatinG: CuRRent RatinG: CuRRent RatinG: Resistive load 16a Resistive load 16a Resistive load 16a inductive load 2.5a inductive load 2.5a inductive load 2.5a tungsten lamps 5a tungsten lamps 5a tungsten lamps 5a (1000w) (1000w) (1000w) Fluorescent lamps 1000w Fluorescent lamps 1000w Fluorescent lamps 1000w DimenSionS: DimenSionS: DimenSionS: 85 x 36 x 68mm 90 x 18 x 74mm 85 x 36 x 68mm CaBle CaPaCity: CaBle CaPaCity: CaBle CaPaCity: 2 x 2.5mm[2] or 4 x 2 x 2.5mm[2] or 4 x 2 x 2.5mm[2] or 4 x 1.5mm[2] 1.5mm[2] 1.5mm[2] en 60730-2-7: 1993 en 60730-2-7: 1993 en 60730-2-7: 1993 

Sentry 

**291** 

## circuit protection 

**Time Consumer Delay unit Cable Kits Switches** 

## **Accessories** 

## ONE MODULE 

**==> picture [474 x 248] intentionally omitted <==**

**----- Start of picture text -----**<br>
Our Ref:Version: Ono:Date:Size:Ref: MK Electrics22852F64125.03.08v. 2228.6 x 320 Pantone485PantoneBlue?? Pantone102PantoneBlack Pantone355<br>y Y. a = esa = ; —_—_— A RESETTING INSTRUCTION LABEL  If a device switches 'OFF' in the eventof a fault, take the following action:MCB • Check each appliance connected to   that device and remove if faulty.• Push the lever up, to switch on.• Under fault detection the MCB will trip to a   mid-"trip" position.   Reset MCB by switching "off", then "on".   Reset RCBO by switching to "on".RCD• Reset the lever to the off position, if necessary.• Push the lever up, to switch on.• If the RCD trips again, switch off   all MCB's & switch on the RCD.• Switch each MCB on, one at a time.   the RCD will switch off when the   faulty circuit is reconnected. 1 / RCBOor for general guidance, MK Technical Services on 01268 563720.If any device still switches off (or if the RCD cannot be switchedon with all MCB's switched off) then call a qualified electrician, 2 RESETTING INSTRUCTIONS 1791 SENTRY CONSUMER UNIT - LABEL SHEETPlease leave any unused labels with the consumer 3 4 101852 6 MCB 7 PUSH LEVER 19 SWITCH ON 113 UP TOOnOff 8 Mid-TripPUSH LEVERSWITCH ON 9 TEST BUTTONUP TORCD 1220104 BUTTON 11 TESTRCBO 1213215 B RCD 'TEST' Label13Fit to prominent position on or nearConsumer Unit. This installation, or part of it, isprotected by a device whichautomatically switches off the supplyif an earth fault develops.Test quarterly by pressing the buttonmarked 'T' or 'Test'. The deviceshould switch off the supply andshould then be switched on to restorethe supply.If the device does not switch off thesupply when the button is pressed,seek expert advice. 1414226 15237 16248 |<br>PROTECTEDTEST QUARTERLYCIRCUITSRCD PROTECTEDTEST QUARTERLYCIRCUITSRCD PROTECTEDTEST QUARTERLYCIRCUITSRCD<br># (ll ; . F Circuit ID Labels “Se SWITCHMAIN11 12 131 142 153 (Cut as required)164 175 186 I 197 208 l 219 10<br>‘ . 5562s  5544s ! SOCKETSFREEZERCIRCUITHEATERLIGHTSWATERBASE-BASE-BASE-MENTMENTMENTRING 22 SOCKETSGROUNDGROUNDGROUNDCIRCUITHEATERFRIDGELIGHTSWATERFLOORFLOORFLOORRING 23 SOCKETSCENTRALHEATINGCOOKERCIRCUITLIGHTSFLOORFLOORFLOORFIRSTFIRSTFIRSTRING 24 COMPUTERSTORAGESOCKETSSECONDSECONDSECONDCIRCUITHEATERLIGHTSFLOORFLOORFLOORRING STORAGESOCKETSOUTSIDEKITCHENCIRCUITHEATERSMOKELIGHTSALARMRING U1 SOCKETSSHOWERCIRCUITSMOKELIGHTSALARMRING U2 LL G Individual Circuit Labels SECURITYSOCKETSSHOWERKITCHENLIGHTSALARMCLEANEARTH U3 SECURITYSOCKETSBUILDINGGARAGEGARAGELIGHTSALARMDOORBELLOUT CONSUMER UNIT 4 module unit MUST NOT EXCEED220-250V 50Hz a.c.RATED CURRENTBEFORE REMOVING OFF DISCONNECT THEWARNINGTO BS EN 60439-3MK SENTRY ON MAINS SUPPLYTHIS COVER63A MAX H Main Switches  CONSUMER UNITMUST NOT EXCEED220-250V 50Hz a.c.RATED CURRENTTO BS EN 60439-3 8, 12, 16 & 21 module units MK SENTRY100A MAXDISCONNECT THE UNITOFF TO COMPLETELYALL MAIN SWITCHESMUST BE SWITCHED Warning Labels FROM THE SUPPLYIMPORTANT OFFON BEFORE REMOVINGDISCONNECT THEWARNINGMAINS SUPPLYTHIS COVER<br>K5563s Liability cannot be accepted by PPL for errors or omissions once the proof and job specification has been approved.This proof has been printed on a low resolution colour proofer. Colours may vary from final print.<br>| K5597s<br>5650s<br>= . [7] :<br>:<br>K8041s K5545sMAG<br>gai<br>K5511s<br>; SS<br>= tst.=--- =<br>rete:<br>~~ [60<br>N K5593s TEDECPCCTe ee eee eee a =e<br>K5565s KAx26s K5599s<br>C Busbar Shield Warning Label   (Factory fitted)  WARNING ENSURE ALL TERMINAL SCREWS ARE FULLY TIGHTENED BEFORE FITTING FRONT COVER<br>ADDITIONAL INFORMATION<br>CIRCUIT NUMBER E Additional Information Label<br>TIME DELAYED RCD<br>**----- End of picture text -----**<br>


## **K5563s** 

**5650s** Delay RanGe 

SPlit-loaD Kit Consists of 3 cables (2 neutral and 1 live) for use when assembling a split load arrangement. 

1 - 7 minuteS (aPPRox) 

## **K5565s** 

multi-inComeR Kit Consists of a blue flexible cable with pre-fitted terminal for the neutral return Suitable for installation in Sentry from switch or RCD to second or third Consumer units and two or four neutral bar. module enclosures. offers time delay control for complete circuits of either tungsten or fluorescent lighting **K5568s** with any number of standard push 17th edition cable kit for switch and switches. it can also be used to twin RCD arrangement control fans in bathrooms without a window. Delay setting can be over- **K5567s** ridden by setting to ‘Perm-on’ mode, or by fitting a remote overriding a&D cable kit for switch plus switch. Switch has a switching triple RCD arrangement capacity of 16a Resistive loads (upf) Fluorescent lamps uncompensated Series compensated 1300w **K5563s** Parallel compensated 480w For use when assembling split-load 

**K5563s** For use when assembling split-load arrangement. 

CFlS 100w max. maximum of 9 units can be connected incandescent lamps 2000w neon glow lamp load (locating lamp for Push Switch) 50ma max VoltaGe RatinG: 230V 50Hz DimenSionS: 84 x 18 x 70mm CaBle CaPaCity: 1 x 4mm[2] or 2 x 1.5mm[2] 

**K5565s** For use when assembling a consumer unit in a multi-incomer arrangement with separate supply to each incomer. these kits must be used to ensure compliance with BS en 60439-3 

## **5562s** 

extenSion 

teRminal 

For use when assembling a consumer unit as a distribution board. enables direct connection of cables to the neutral bar. Consists of a 25mm[2] capacity terminal with clamp screw. 

## **K8041s** 

loCKinG DeViCe For use when locking a Sentry mCB, RCBo, RCD or switch disconnector in either the on or off position. 

## **K5593s** 

BaRRel loCK anD Key Kit Suitable for securing ‘K’ series Sentry Consumer unit lids. 

## **5544s** 

mCB BlanK – GRey Designed to fill unused modules in Sentry Consumer units and small enclosures. Din-rail mounted. 

## **K5545sMAG** 

CoVeR mounteD BlanK For filling spaces in the ‘K’ series Sentry consumer unit cover, where there are unused modules. 

## **K5511s** 

BuSBaR 11 module. 

## **K5590s** 

BuSBaR 20 module. 

## **KAx26s** 

BuSBaR CoVeR Suitable for insulating the busbars K5511s and K5590s 20 module. 

## **K5597s** 

ConSumeR unit laBelS additional printed and blank labels, for identifying devices and circuits on Dual & triple RCD boards 

## **K5599s** 

ConSumeR unit laBelS additional printed and blank labels, for identifying devices and circuits on single RCD boards.