K50PSAF1000SQ

## K50 Indicators and Buttons 

## **Rugged, Cost-Efficient Indicators, Touch Buttons, and Touchless Buttons Simplify Inventory and Setup** 

K50 Indicators bring clarity to every process—delivering combinations of vivid color, striking sound, and interactive touch and touchless buttons that make process cues unmistakable. With domed, flat pack, and compact options, each model is built for high visibility, sealed for rugged environments, standardized for consistent fit, and compatible with any control protocol. Whether using discrete signals, IO-Link, Modbus, or PICK-IQ **®** , process states become intuitive feedback that guides action, reduces response time, or confirms progress in real time. Where tasks could move faster, awareness could sharpen, or response time could improve—there is a K50 that can make it happen. 

## K50 Pro rammable Indicators g 

## Your Go-To K50 for Bright, Reliable Indication 

- Save with a cost-efficient, lightweight design that delivers lasting performance in industrial environments with an IP66/IP67/IP69K-rated housing 

- Communicate status using seven default colors (green, red, yellow, blue, white, cyan, magenta), with seven additional colors and 11 animations configurable using Pro Editor software or controllable via IO-Link and Modbus 

- Reduce wiring and I/O count by using the PFM/PWM input on discrete models, giving a single PLC or sensor output dynamic control of up to 16 states configurable via Pro Editor 

- Optimize device communication and enhance operator feedback with Modbus models 

- Simplify device setup and replacement with Pro ID functionality on discrete models 

- Bimodal inputs (PNP/NPN), depending on source wiring 

Housing Color and Input Connection **K50PSL RGB7 Q** aU **RGB7** = RGB (7 colors, 15 states) **Q** =  M12 integral QD **K** = IO-Link **S** = Modbus 

## PRO EDITOR SOFTWARE Co 

Banner’s Pro Editor Software is a free tool that allows users to configure device status, colors, animations, and much more for control via discrete inputs, bringing intuitive indication and interaction to the visual factory. Configurable RGB devices make supply chains more efficient by allowing you to standardize on one model that can be customized as needed. The application-based interface makes it easy to configure a device for a wide range of applications such as displaying machine warm-up time, indicating unique steps in an assembly process, showing distance and position information, and communicating multiple machine states. 

## **PRO-KIT** 

A single Pro-Kit provides everything required to program the K50 using the free Pro Editor software, and is required only for setup, not daily operation. 

Programmable LED indicators offer multiple color choices in a single housing ~~a~~ 

## @ IO- ~~L~~ for Dynamic Control ink°® 

## **Reduced Costs and Increased Efficiency** 

IO-Link models allow for dynamic control—reacting to inputs from other devices—and have additional capabilities that discrete devices do not. IO-Link enables users to change device parameters from the control system as needed, such as during product changeover, which reduces downtime and allows machines to accommodate greater product diversity. These models also offer unique LED color management to provide advanced users with total control. 

www.bannerengineering.com   |   1-888-373-6767 

## Advanced Features for Specialized Applications 

**==> picture [206 x 205] intentionally omitted <==**

**----- Start of picture text -----**<br>
Audible<br>Dome<br>®<br>FDA grade<br>Compact<br>**----- End of picture text -----**<br>


## **• All the capabilities of the Go-To model** 

- Protect against moisture, impact, and mechanical stress with fully encapsulated electronics that ensure reliable performance in high-vibration and washdown environments 

- Integrate easily into low-profile applications with compact models 

- Use in clean, hygienic, or washdown-required environments with FDA-grade models 

- Bimodal inputs (PNP/NPN), depending on source wiring 

Audible Housing Material Color & Input Alarm* Connection **K50L2 RGB7 A1 Q K50L2** = Dome **Blank** = Standard **RGB7** = RGB multicolor (7 colors) **Blank** = No audible **Blank** = 2 m integral cable **K50CL2** = Compact F** = FDA grade **RGBK** = RGB multicolor with IO-Link **A1** = Audible* **Q** = M12 integral QD AL1** = Loud audible* **QP** = M12 pigtail QD *Audible models not available in FDA grade or compact **ALS** =  Sealed audible* 

*Audible models not available in FDA grade or compact 

**Compact and integral QD models not available in FDA grade 

QD models require mating cordset 

## Beacon Models 

- Add unmistakable indication to outdoor or high ambient light environments with bright, visibly distinct LEDs 

- Protect against moisture, impact, and mechanical stress with fully encapsulated electronics that ensure reliable performance in high-vibration and washdown environments 

**==> picture [63 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
M12 Integral QD<br>**----- End of picture text -----**<br>


**==> picture [45 x 19] intentionally omitted <==**

**----- Start of picture text -----**<br>
Dual M12<br>Integral QD<br>**----- End of picture text -----**<br>


- Communicate clearly using seven default colors (green, red, yellow, blue, white, cyan, magenta), with animations configurable using Pro Editor software or controllable via IO-Link or Modbus 

- Optimize device communication and enhance operator feedback with Modbus models 

## **IO-Link and Modbus Models** 

Housing Color & Input Connection **K50PBL RGB7 Q RGB7** = RGB multicolor **Blank** = 2 m integral cable (7 colors) **Q** = M12 integral QD **QP** = M12 pigtail QD QD models require mating cordset 

Housing Control Connection **K50PBL S Q2PS S** = Modbus **Q** = M12 integral QD **K** = IO-Link **QP** = M12 pigtail QD **Q2PS** =  Dual 240 mm PVC shielded * Not available with IO-Link models cables with M12 integral QD* 

QD models require mating cordset 

## K50 Indicators 

## Domed Models 

- Ready out of the box with three bright, uniform colors 

•  Protect against moisture, impact, and mechanical stress with fully encapsulated electronics that ensure reliable performance in high-vibration and washdown environments Housing Color Input Connection **K50L GRY P Q GRY** = Green, Red, Yellow **P** = PNP **Q** = M12 integral QD wv —_ > QD models require mating cordset Hazardous Zone Models •  Certified for use in hazardous zones to ATEX, CSA c/us, UKCA, and IECEx standards •  Built for demanding environments with a fully sealed design rated IP67/IP69K (DIN 40050-9) •  Models available with one, two, or three fixed colors; five total colors available Color Housing Style 1        2        3 Input Connection **K50L M G R Y P Q M** = Ex mb **G** = Green **B** = Blue **P** = PNP **Blank** = 2 m integral cable wv IC) ~~Ee~~ Go **N** =Ex nA **R** = Red **W** = White **Q** = M12 integral QD* **Y** = Yellow **X** = No color QD models require mating cordset * Not available with ex mb models Flat Pack Models • Ready out of the box with up to five bright, uniform colors • Meet space constraints with compact, low-profile models • Match wiring with bimodal input options (PNP/NPN) Housing Color Input Connection **K50FL G R Y P Q G** = Green **B** = Blue **O** = Orange **P** = PNP **Blank** = 2 m integral cable **R** = Red **W** = White **X** = No color* **N** = NPN **Q** = M12 integral QD **Y** = Yellow **QP** = 150 mm PVC cable with M12 QD **QPMA** = 150 mm PUR cable with M12 QD 

* LED color designated with X also indicates that the associated input wire is not used 

QD models require mating cordset 

www.bannerengineering.com   |   1-888-373-6767 

## Beacon Models 

- Add unmistakable indication to outdoor or high ambient light environments with bright, visibly distinct LEDs 

- Ready out of the box with choice of five colors 

- Match wiring with bimodal input options (PNP/NPN) 

|**LED Color(s)**|**Viewable Area**|**Input Type**|**Supply Voltage**|**Connection**|**Models**|
|---|---|---|---|---|---|
|Green<br>Red<br>Yellow<br>Blue<br>White<br>Green, red, yellow|Perimeter view only<br>Perimeter and top view<br>Perimeter view only<br>Perimeter and top view<br>Perimeter view only<br>Perimeter and top view<br>Perimeter view only<br>Perimeter and top view<br>Perimeter view only<br>Perimeter and top view<br>Perimeter view only<br>Perimeter and top view|PNP|12 to 30 V DC|M12 integral QD|**K50BLXGXPQ**<br>**K50BCLXGXPQ**<br>**K50BLXRXPQ**<br>**K50BCLXRXPQ**<br>**K50BLXYXPQ**<br>**K50BCLXYXPQ**<br>**K50BLXBXPQ**<br>**K50BCLXBXPQ**<br>**K50BLXWXPQ**<br>**K50BCLXWXPQ**<br>**K50BLGRYPQ**<br>**K50BCLGRYPQ**|



## e[e] ee© Daylight Visible Models 

- Add unmistakable indication to outdoor daylight applications with high-output, visibly distinct LEDs 

- Meet tight space requirements with a compact, low-profile housing designed for cost efficiency 

- Ready out of the box with one, two, or three fixed colors; five total colors available 

|**LED Color(s)**|**Input Type**|**Supply Voltage**|**Connection**|**Models**|
|---|---|---|---|---|
|Green<br>Red<br>Yellow<br>Blue<br>White<br>Green, red, yellow<br>Green, red, blue|PNP/NPN<br>PNP<br>NPN<br>PNP<br>NPN|15 to 30 V DC|M12 integral QD|**K50LDXGXPQ**<br>**K50LDXRXPQ**<br>**K50LDXYXPQ**<br>**K50LDXBXPQ**<br>**K50LDXWXPQ**<br>**K50LDGRYPQ**<br>**K50LDGRYNQ**<br>**K50LDGRBPQ**<br>**K50LDGRBNQ**|



## K50 Pro rammable Touch Buttons g 

## Your Go-To K50 Touch Button 

- Advanced touch technology reliably detects both bare and gloved hands with no force required, reducing strain on hands and wrists 

- Replace basic on/off buttons with configurable touch response, including momentary or latching operation, normally open or closed states, and adjustable on/off delays—all easily configured on discrete models with Pro Editor software or directly via protocol on IO-Link and Modbus models 

- Easily communicate via three default colors (red, green, yellow), with 11 additional colors and eight animations configurable on discrete models using Pro Editor software or directly via protocol on IO-Link and Modbus models 

Housing Color and Input Connection **K50PST GRY3 Q GRY3** = RGB (3 colors, 3 states) **Q** =  M12 integral QD **K** = IO-Link **S** = Modbus/PICK-IQ 

**RGB14** = RGB (14 colors, 15 states) 

for High Device DensityPICK-IQ® ~~eo~~ **Faster Response Speed and Simplified Programming** PICK-IQ is a purpose-built serial protocol that maintains high speeds even in networks with a high device count. Devices with PICK-IQ allow full access to color, flashing, rotating, and dimming settings as well as advanced animations such as process statuses and LED control. Devices with PICK-IQ are typically used in pick-and-put walls, light-guided assembly, and other high-density installations with close device proximity. 

## Optimizing Operator Visibility and Control on Conveyor Lines 

## **Challenge** 

Mechanical push buttons slow down processes and wear out over time, leading to downtime. Traditional status indicators have limited lateral visibility, making it difficult for workers to see where they are needed at a glance. Solving both issues typically requires multiple devices, adding complexity. 

## **Solution** 

- K50 Pro Select Touch Buttons provide both highly visible 360° indication and configurable touch detection in one convenient device for clear operator guidance from any angle 

- Advanced touch technology is reliable with no moving parts to wear out, minimizing downtime 

- Programmable colors and animations give machines a voice, helping operators quickly identify problem types and locations 

www.bannerengineering.com   |   1-888-373-6767 

## Advanced Features for Specialized Applications 

- Combine proven touch technology and ruggedness with the added versatility of RGB LEDs 

- Models available with FDA-grade materials for use in clean, hygienic, or washdown-required environments 

**==> picture [247 x 144] intentionally omitted <==**

**----- Start of picture text -----**<br>
Haptic  Audible<br>Feedback<br>Compact<br>FDA grade Push Button<br>**----- End of picture text -----**<br>


- Communicate status using up to 14 colors and 11 animations, configurable with Pro Editor software or controllable via IO-Link or Modbus 

- Optimize device communication and enhance operator feedback with PICK-IQ®, Banner’s Modbus-based protocol 

Activation Output Output Color/ Housing Method Style State Function Control Audible Connection **K50P T A M GRY3 A Q Blank** = Dome **A** = Normally open **M** = Momentary **A** = Audible* **Blank** = 2 m integral cable **C** = Compact* **L** = Latching **Q** =  M12 integral QD QP** =  M12 pigtail QD** el Gane eee **T** = Touch **GRY3** =  Programmable multicolor (3 Colors, 5-pin) QD models require mating cordset **TF** =  Touch, FDA grade **RGB7** =  Programmable multicolor (7 colors, 8-pin)* **TV** =  Touch, vibration feedback **RGB14** =  Programmable multicolor (14 colors, 8-pin) **TFV** =  Touch, FDA grade, vibration feedback * Not available in FDA grade or with vibration feedback 

* Not available in FDA grade or with vibration feedback **Not available in FDA grade 

## **IO-Link or PICK-IQ Models** 

Housing Control Connection **K50PT K Q** — **K** = IO-Link **Q** =  M12 integral QD **S** = Serial/PICK-IQ QD models require mating cordset 

## K50 Pro rammable Touchless Buttons g 

## Your Go-To K50 Touchless Button 

- Reliably detect and indicate with one device, with configurable sensing across a 20 to 1000 millimeter range 

- Quickly communicate via three default colors (red, green, yellow), with 11 additional colors and eight animations configurable on discrete models using Pro Editor software or directly via protocol on IO-Link and Modbus models 

- Easily configure sensing range in the three default operating modes (Object, Background, Window) using the teach function—no PC required. Configure alternate modes and logic on discrete models with Pro Editor software or directly via protocol on IO-Link and Modbus models 

**==> picture [386 x 83] intentionally omitted <==**

**----- Start of picture text -----**<br>
Housing Style Color and Input Connection<br>K50 PSAF1000 GRY3 Q<br>PSAF1000  = Adjustable field sensor GRY3  = RGB (3 colors, 3 states) Q  =  M12 integral QD<br>K  = IO-Link<br>S  = Modbus/PICK-IQ<br>RGB14  = RGB (14 colors, 15 states)<br>**----- End of picture text -----**<br>


## Improve Assembly Time and Accuracy with Indication and Optical Sensing 

**==> picture [89 x 18] intentionally omitted <==**

**----- Start of picture text -----**<br>
app image<br>**----- End of picture text -----**<br>


## **Challenge** 

Traditional pick-to-light systems require workers to press a button to confirm a pick, a step that slows cycle times. In high-volume operations, even a onesecond delay per pick compounds into significant lost productivity, reducing overall throughput and operational speed. 

## **Solution** 

- The K50 Programmable Touchless Button combines a bright, multicolor indicator with an optical sensor that requires no physical touching of a button 

- Optical sensing technology is ideal for pick-to-light applications, reliably detecting both bare and gloved hands in many different environments 

- Bright, clear LEDs turn green to indicate pick location, turn yellow to confirm a correct pick, and turn red to show a mispick 

www.bannerengineering.com   |   1-888-373-6767 

## K50 Control and Dis la p y 

## Touch with Display 

- Four-digit, seven-segment LED display 

- Two independent touch areas 

- Excellent immunity to false triggering by water spray, oils, and other foreign materials 

- Can be actuated with bare hands or gloves 

**==> picture [63 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
M12 Integral QD<br>**----- End of picture text -----**<br>


**==> picture [456 x 105] intentionally omitted <==**

**----- Start of picture text -----**<br>
Dual M12<br>Integral QD Activation<br>Housing Method Display Control Connection<br>K50P TC D4 K QP<br>D4  = 4-Digit LED Display K  = IO-Link Q  =  M12 integral QD<br>S  = PICK-IQ QP  = 150 mm (6 in) cable with M12 QD<br>TC  = Touch Q2PS  =  Dual 240 mm (9.45 in) PVC shielded<br>cables with M12 integral QDs*<br>**----- End of picture text -----**<br>


QD models require mating cordset 

*Not available with IO-Link models 

## I/O Touch Control with Display 

- Onboard analog, PWM, PFM, and discrete outputs enable control of core applications such as adjusting VFD speed, dimming LED lights, and signaling part-picking details 

- Two capacitive touch zones provide reliable input with gloved or bare hands—with no mechanical parts to wear out 

- Four-character, 14-segment display improves operator response by showing output values and system messages 

**==> picture [143 x 39] intentionally omitted <==**

**----- Start of picture text -----**<br>
M12 Integral QD<br>Dual M12<br>Integral QD<br>**----- End of picture text -----**<br>


- Bright, multicolor LEDs provide operators with at-a-glance equipment status. All colors and animations are easily configured with Banner’s free Pro Editor software 

**==> picture [155 x 78] intentionally omitted <==**

**----- Start of picture text -----**<br>
Activation<br>Housing Method Display<br>K50P TC D4<br>D4  = 4-Digit LED display<br>TC  = Touch<br>**----- End of picture text -----**<br>


**==> picture [162 x 24] intentionally omitted <==**

**----- Start of picture text -----**<br>
Mode Connection<br>PICK Q<br>**----- End of picture text -----**<br>


**UI4** =  0 to 10 V (4 to 20 mA) (pin 4) **UI5** =  0 to 10 V (4 to 20 mA) (pin 5) **PULS** = PWM/PFM **PICK** = Pick-to-light 

**Q** = M12 integral QD **Q2PS** =  Dual 240 mm PVC-jacketed cables with M12 integral QD* 

QD models require mating cordset 

- *Only available with UI4 models 

## **Additional Indicators and Touch Buttons** 

## Indicators 

**==> picture [497 x 269] intentionally omitted <==**

**----- Start of picture text -----**<br>
‘1 ee ee<br>S18L/S22L S22 GS60 K30 K70 K90 K100<br>\<br>| i |<br>S15L WLF12 WLS15 WLS27 RLS27 WLS28<br>**----- End of picture text -----**<br>


Touch Button and Pick-to-Light 

**==> picture [43 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
S22 Touch<br>**----- End of picture text -----**<br>


**==> picture [158 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
K30 Touch K30 Optical Sensor<br>**----- End of picture text -----**<br>


**==> picture [164 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
K70 Touch PTL110<br>**----- End of picture text -----**<br>


**==> picture [492 x 100] intentionally omitted <==**

**----- Start of picture text -----**<br>
Displays Task Lighting Tower Lights<br>om! Le<br>**----- End of picture text -----**<br>


Banner Engineering Corp. 

1-888-373-6767 • www.bannerengineering.com 

© 2025 Banner Engineering Corp. Minneapolis, MN USA 

PN B_51944414 rev. A