K50LGRYPQPMA

K50 General Purpose Indicator Datasheet 

## Features 

50 mm Multicolor LED Indicator 

- Bright, uniform indicator light 

- • Rugged IP69K per ISO 20653 and IP67-rated design • 18 V DC to 30 V DC operation • Operate up to three colors in one device • Up to six colors to choose from • PNP or NPN models available • Variety of connector options 

## Models 

**==> picture [490 x 129] intentionally omitted <==**

**----- Start of picture text -----**<br>
Family LED Color Input Connector [(1)]<br>K50L G R Y P Q<br>C1 C2 C3<br>G = Green<br>R = Red Blank = 2 m (6.5 ft) integral PVC-jacketed cable<br>K50L Y = Yellow P = PNP Q = Integral 4-pin M12 male quick-disconnect connector<br>K50FL B = Blue N = NPN QP = 150 mm (6 in) PVC-jacketed cable with a 4-pin M12 male quick-disconnect<br>connector<br>W = White<br>QPMA = 100 mm (6 in) PUR-jacketed cable with a 4-pin M12 quick-disconnect connector<br>O = Orange<br>X = No color [(2)]<br>**----- End of picture text -----**<br>


## Wiring 

**==> picture [434 x 105] intentionally omitted <==**

**----- Start of picture text -----**<br>
4-pin M12 Male Pinout PNP Input NPN Input<br>2 Indicator bu (3) . Indicator bn (1)<br>1 Color bk (4) 18-30 V DC Color bk (4) 18-30 V DC<br>3 C1 C1<br>4 bn (1) bu (3)<br>C2 C2<br>C3 wh (2) C3 wh (2)<br>ger ES<br>**----- End of picture text -----**<br>


## Specifications 

Supply Voltage and Current 18 V DC to 30 V DC 40 mA maximum current per color Supply Protection Circuitry Protected against reverse polarity and transient voltages Leakage Current Immunity 400 µA Input Response Time Indicator On/Off: 1 ms maximum 

Construction Base and dome: Polycarbonate Mounting M30 × 1.5 threaded base, maximum torque 4.5 N·m (40 in-lbf) Mounting nut included 

Environmental Rating Quick-disconnect models meet IP69K per ISO 20653 Cable models rated IP67 

NOTE: Cable models meet IP69K per ISO 20653 if the cable and cable entrance is protected from highpressure spray. 

Connections Integral 4-pin M12 male quick-disconnect connector, 150 mm (6 in) PVC-jacketed or PURjacketed cable with a 4-pin M12 male quickdisconnect connector, or 2 m (6.5 ft) integral PVCjacketed cable, depending on model 

(1) Models with a quick-disconnect connector require a mating cordset. 

(2) LED color designated with X also indicates that the associated input wire is not used. 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

Original Instructions 02-Jun-25 

p/n: 203619 Rev. C 

K50 General Purpose Indicator Datasheet 

## Vibration and Mechanical Shock 

All models meet MIL-STD-202F, Method 201A (Vibration: 10 Hz to 60 Hz maximum, 0.06 inch (1.52 mm) double amplitude, 10G maximum acceleration) requirements. Also meets IEC 60947-5-2 (Shock: 30G 11 ms duration, half sine wave) requirements. 

## Operating Conditions 

–40 °C to +50 °C (–40 °F to +122 °F) 

## Indicator Characteristics 

**==> picture [131 x 95] intentionally omitted <==**

**----- Start of picture text -----**<br>
Dominant Wavelength (nm)  Lumen Output<br>Color or Color Temperature  (Typical at 25<br>(CCT) °C)<br>Green 528 nm 20<br>Red 625 nm 6.0<br>Yellow 590 nm 20<br>Blue 470 nm 5.0<br>Orange 608 nm 11<br>White 6000 K 16<br>**----- End of picture text -----**<br>


## Required Overcurrent Protection 

WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. 

Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. Supply wiring leads < 24 AWG shall not be spliced. For additional product support, go to www.bannerengineering.com. 

**==> picture [125 x 57] intentionally omitted <==**

**----- Start of picture text -----**<br>
Supply  Required  Supply  Required<br>Wiring  Overcurrent  Wiring  Overcurrent<br>(AWG) Protection (A) (AWG) Protection (A)<br>20 5.0 26 1.0<br>22 3.0 28 0.8<br>24 1.0 30 0.5<br>**----- End of picture text -----**<br>


**==> picture [35 x 5] intentionally omitted <==**

**----- Start of picture text -----**<br>
Certifications<br>**----- End of picture text -----**<br>


Banner Engineering BV Park Lane, Culliganlaan 2F bus 3 1831 Diegem, BELGIUM 

**==> picture [85 x 6] intentionally omitted <==**

**----- Start of picture text -----**<br>
UL applies to K50L models only<br>**----- End of picture text -----**<br>


## Dimensions 

All measurements are listed in millimeters [inches], unless noted otherwise. The measurements provided are subject to change. 

**==> picture [452 x 336] intentionally omitted <==**

**----- Start of picture text -----**<br>
K50L Models K50FL Models<br>50.0<br>[1.97"] 44.6 [1.76"]<br>Ø50 [1.97"]<br> 38 [1.50"]<br>M30 x 1.5<br>(mounting nut  60.0<br>included) [2.36"]<br>Max. Torque 4.5 Nm  Le [1.38"]35.0 |<br>(40 in-lbf) read<br>20 [0.79"]<br>Internal Threads<br>½ - 14 NPT  11 [0.43"] 2x 5.0 [0.20"]<br>Max. Torque 2.25 Nm 16.0 [0.63"] 2x 5.5 [0.21"]<br>(20 in-lbf) 17.0 [0.67"]<br>2x 5.0 [0.20"]<br>40.0 [1.58"]<br>K50L Cabled Models<br>58<br>[2.28"]<br>38<br>[1.50"]<br>Internal Threads<br>½ - 14 NPT<br>Max. Torque 2.25 Nm<br>(20 in-lbf)<br>wn =2<br>M30 x 1.5<br>i (mounting nut<br>included)<br>Ø50 Max. Torque 4.5 Nm<br>[1.97"] (40 in-lbf)<br>**----- End of picture text -----**<br>


© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

page 2 

02-Jun-25 

K50 General Purpose Indicator Datasheet 

## Accessories 

## Cordsets 

**==> picture [500 x 551] intentionally omitted <==**

**----- Start of picture text -----**<br>
4-Pin Single-Ended M12 Female Cordsets<br>Model  Length  Style  Dimensions  Pinout (Female)<br>MQDC-406 2 m (6.56 ft)  44 Typ.<br>MQDC-415 5 m (16.4 ft)<br>MQDC-430 9 m (29.5 ft)  2<br>1<br>M12 x 1<br>Straight  ø 14.5 3<br>Ø5.2 mm 4 5<br>MQDC-450 15 m (49.2 ft)<br>7 mm<br>58 mm 1 = Brown<br>2 = White<br>3 = Blue<br>MQDC-406RA 2 m (6.56 ft)  32 Typ. 4 = Black<br>MQDC-415RA 5 m (16.4 ft)  [1.26"] 5 = Not used<br>MQDC-430RA 9 m (29.5 ft)<br>30 Typ. 2<br>[1.18"] 3<br>1<br>Right-Angle  4<br>M12 x 1<br>MQDC-450RA 15 m (49.2 ft)  ø 14.5 [0.57"]<br>Ø5.2 mm<br>7 mm<br>58 mm<br>Brackets<br>45<br>SMB30A<br>• Right-angle bracket with curved slot for versatile orientation C<br>• Clearance for M6 (¼ in) hardware 61<br>• Mounting hole for 30 mm sensor<br>• 12-gauge stainless steel B<br>A<br>Hole center spacing:  A to B=40<br>Hole size:  A=ø 6.3, B= 27.1 × 6.3, C=ø 30.5 69<br>SMB30FA 83.2<br>• Swivel bracket with tilt and pan movement for precise adjustment<br>• Mounting hole for 30 mm sensor<br>• 12-gauge 304 stainless steel<br>• Easy sensor mounting to extrude rail T-slot<br>• Metric- and inch-size bolt available 36.3 B 68.9<br>A<br>Bolt thread:  SMB30FA, A= 3/8 - 16 × 2 in; SMB30FAM10, A= M10 - 1.5 × 50<br>Hole size:  B= ø 30.1<br>SMB30FVK 46<br>• V-clamp, flat bracket and fasteners for mounting to pipe or extensions 118<br>• Clamp accommodates 28 mm dia. tubing or 1 in. square extrusions A<br>• 30 mm hole for mounting sensors<br>Hole size:  A= ø 31<br>**----- End of picture text -----**<br>


© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

02-Jun-25 

page 3 

K50 General Purpose Indicator Datasheet 

**==> picture [500 x 419] intentionally omitted <==**

**----- Start of picture text -----**<br>
70 57<br>SMB30MM<br>• 12-gauge stainless steel bracket with curved mounting slots for versatile orientation<br>• Clearance for M6 (¼ in) hardware C<br>• Mounting hole for 30 mm sensor 57<br>B<br>Hole center spacing:  A = 51, A to B = 25.4<br>Hole size:   A = 42.6 × 7, B = ø 6.4, C = ø 30.1<br>A<br>A<br>SMB30RAVK<br>• V-clamp, right-angle bracket and fasteners for mounting sensors to pipe or extrusion<br>• Clamp accommodates 28 mm dia. tubing or 1 in. square extrusions 46<br>• 30 mm hole for mounting sensors<br>Hole size:  A = ø 30.5 57 90<br>67<br>SMB30SC<br>• Swivel bracket with 30 mm mounting hole for sensor B<br>• Black reinforced thermoplastic polyester 58<br>• Stainless steel mounting and swivel locking hardware included<br>Hole center spacing:  A=ø 50.8<br>Hole size:  A=ø 7.0, B=ø 30.0 29<br>A<br>45<br>SMBAMS30P<br>• Flat SMBAMS series bracket C<br>• 30 mm hole for mounting sensors<br>• Articulation slots for 90°+ rotation A<br>• 12-gauge 300 series stainless steel 93 B<br>Hole center spacing:  A=26.0, A to B=13.0<br>Hole size:  A=26.8 × 7.0, B=ø 6.5, C=ø 31.0<br>SMBAMS30RA 45<br>• Right-angle SMBAMS series bracket C<br>• 30 mm hole for mounting sensors<br>• Articulation slots for 90°+ rotation 53 A<br>• 12-gauge (2.6 mm) cold-rolled steel B<br>Hole center spacing:  A=26.0, A to B=13.0 48<br>Hole size:  A=26.8 × 7.0, B=ø 6.5, C=ø 31.0<br>**----- End of picture text -----**<br>


## Banner Engineering Corp Limited Warranty 

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. 

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. 

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. 

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. 

For patent information, see www.bannerengineering.com/patents. 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

02-Jun-25 

page 4