K50LGRYB4PQP

EZ-LIGHT® Indicators — 4-Color, Multi-Function 

## Features 

DC-Operated Indicators with 4 Colors and Multiple Flashing Frequencies 

- Rugged, cost-effective, and easy-to-install indicators in K50, K50 Flat Pack, or K80 housing style 

- Displays 4 colors and multiple flashing frequencies: steady ON, flashing, or alternating 

- Illuminated dome provides easy-to-see operator guidance and indication of equipment status 

- Compact devices are completely self-contained, no controller needed 

- • Choose NPN or PNP input, depending on model • Immune to ambient light, EMI, and RFI interference • 18 V DC to 30 V DC operation 

**==> picture [131 x 39] intentionally omitted <==**

**----- Start of picture text -----**<br>
QPMA<br>Contact factory for more information.<br>T<br>FA<br>G<br>C<br>I A<br>L T<br>P IL<br>L O<br>• •<br>A R<br>E P<br>C Y<br>EUROS-TYL UR•CABLE<br>**----- End of picture text -----**<br>


## WARNING: 

- Do not use this device for personnel protection 

- Using this device for personnel protection could result in serious injury or death. 

- This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A device failure or malfunction can cause either an energized (on) or de-energized (off) output condition. 

## Models 

**==> picture [454 x 91] intentionally omitted <==**

**----- Start of picture text -----**<br>
Models Construction Connection LED Function  [(1)] Inputs<br>K50LGRYB4PQ PNP<br>50 mm dome / 30 mm mount<br>K50LGRYB4NQ polycarbonate NPN<br>K50FLGRYB4PQ 4 Color:  Choose Green, Red,  PNP<br>50 mm polycarbonate dome /  Integral 5-pin M12 male quick-<br>K50FLGRYB4NQ polycarbonate base disconnect connector Yellow or Blue ON, flashing or alternative NPN<br>K80LGRYB4PQ PNP<br>50 mm dome / Flat or DIN-<br>K80LGRYB4NQ mount polycarbonate NPN<br>**----- End of picture text -----**<br>


## For the K50L and K50FL Models: 

- To order the 150 mm PVC cable with QD model, replace the Q with a QP in model number (example, K50LGRYB4PQP ). 

- To order the 2 m (6.5 ft) cable model, omit the suffix Q from model number (example, K50LGRYB4P ). 

- Models with a QD require a mating cable. 

For the K80L Models: To order the terminal-wired model, omit the suffix Q from model number (example, K80LGRYB4P ). 

> (1) Contact the factory for other colors and color combinations. 

Original Instructions 23-Jun-25 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

p/n: 137329 Rev. D 

EZ-LIGHT® Indicators — 4-Color, Multi-Function 

## Wiring Diagrams 

**==> picture [500 x 613] intentionally omitted <==**

**----- Start of picture text -----**<br>
Function PNP Wiring NPN Wiring<br>bu (3) bn (1)<br>bk (4) 18-30 V DC bk (4) 18-30 V DC<br>Wiring Key: G G<br>1 = Brown2 = White3 = Blue R bn (1) R bu (3)<br>4 = Black wh (2) wh (2)<br>5 = Gray Y Y<br>gy (5) gy (5)<br>B B<br>bk (4) bk (4)<br>Green steady<br>bk (4) bk (4)<br>Green flashes wh (2) wh (2)<br>bn (1) bu (3)<br>Red steady<br>bk (4) bk (4)<br>Red flashes bn (1) bu (3)<br>wh (2) wh (2)<br>Yellow steady<br>wh (2) wh (2)<br>Yellow flashes bn (1) bu (3)<br>gy (5) gy (5)<br>Blue steady<br>bn (1) bu (3)<br>Blue flashes gy (5) gy (5)<br>bk (4) bk (4)<br>Green, Red flash cycle gy (5) gy (5)<br>wh (2) wh (2)<br>Red, Blue flash cycle gy (5) gy (5)<br>bk (4) bk (4)<br>wh (2) wh (2)<br>Green, Yellow flash cycle<br>gy (5) gy (5)<br>bk (4) bk (4)<br>bn (1) bu (3)<br>Green, Blue flash cycle<br>gy (5) gy (5)<br>bn (1) bu (3)<br>wh (2) wh (2)<br>Red, Yellow flash cycle<br>gy (5) gy (5)<br>Continued on page 2<br>**----- End of picture text -----**<br>


page 2 of 6 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

23-Jun-25 

EZ-LIGHT® Indicators — 4-Color, Multi-Function 

**==> picture [440 x 125] intentionally omitted <==**

**----- Start of picture text -----**<br>
Continued from page 2<br>Function PNP Wiring NPN Wiring<br>bk (4) bk (4)<br>bn (1) bu (3)<br>Yellow, Blue flash cycle<br>wh (2) wh (2)<br>bk (4) bk (4)<br>bn (1) bu (3)<br>Green, Red, Yellow, Blue flash cycle wh (2) wh (2)<br>gy (5) gy (5)<br>= SS<br>**----- End of picture text -----**<br>


## Specifications 

## Supply Voltage and Current 

## Required Overcurrent Protection 

18 V DC to 30 V DC at 50 mA maximum 

## Indicators 

Entire translucent diffuser or dome provides indication. LEDs are independently selected: Green, Red, Yellow, or Blue; ON steady or flashing, alternating or rotating 

WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. 

## Input Response Time 

Indicator ON: 250 ms maximum 

Indicator OFF: 10 ms maximum 

## Operating Conditions 

–40 °C to +50 °C (–40 °F to +122 °F) 

## Environmental Rating 

K50L and K50FL models: fully encapsulated, rated IP67 and IP69K per DIN 40050-9. Cabled models also meet IP69K if the cable and cable entrance are protected from highpressure spray. 

K80L models: IP67 (encapsulated electronics) 

## Indicator Flash Rate 

1-Color: 1-second flash rate (500 ms ON) 

2- and 4-Color Flash: 500 ms per color 

## Construction 

See Models table 

## Connections 

Integral 5-pin M12 male quick-disconnect connector; 150 mm (6 in) PVC-jacketed cable with a 5-pin M12 male quickdisconnect connector; or 2 m (6.5 ft) unterminated 5-wire PVC-jacketed cable depending on the model ordered 

Overcurrent protection is required to be provided by end product application per the supplied table. 

Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. Supply wiring leads < 24 AWG shall not be spliced. For additional product support, go to www.bannerengineering.com. 

**==> picture [233 x 155] intentionally omitted <==**

**----- Start of picture text -----**<br>
Supply  Supply<br>Required Overcurrent  Required Overcurrent<br>Wiring  Wiring<br>Protection (A) Protection (A)<br>(AWG) (AWG)<br>20 5.0 26 1.0<br>22 3.0 28 0.8<br>24 1.0 30 0.5<br>Certifications<br>Banner Engineering BV<br>Park Lane, Culliganlaan 2F bus 3<br>C€ 1831 Diegem, BELGIUM<br>All models:<br>K50L models only:  us<br>**----- End of picture text -----**<br>


© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

page 3 of 6 

23-Jun-25 

EZ-LIGHT® Indicators — 4-Color, Multi-Function 

## Dimensions 

**==> picture [500 x 602] intentionally omitted <==**

**----- Start of picture text -----**<br>
K50L K50FL<br>50.0 mm<br>(1.97")<br>44.6 [1.76"]<br>Ø50 [1.97"]<br>M30 x 1.5  38 mm (1.50")* 60.0<br>[2.36"]<br>(mounting nut  35.0<br>included) [1.38"]<br>Max. Torque 4.5 Nm<br>(40 in-lbf) 20 mm (0.79") 2x 5.0 [0.20"]<br>16.0 [0.63"] 2x 5.5 [0.21"]<br>Internal Threads  2x 5.0 [0.20"] 17.0 [0.67"]<br>½ - 14 NPSM  11 mm (0.43")<br>Max. Torque 2.25 Nm 40.0 [1.58"]<br>(20 in-lbf)<br>K80L<br>80.8 mm<br>(3.18")<br>109.5 mm<br>65.0 mm 66.3 mm (4.31")<br>(2.56") (2.61")<br>65.0 mm<br>(2.56")<br>Internal Threads ½ - 14 NPSM<br>4X Ø 5.5 mm (Ø 0.22")  Max. Torque 2.25 Nm (20 in–lbf)<br>Max. Torque 1.12 Nm (10 in–lbf) with supplied screws 26.0 mm<br>(1.02")<br>4X 8–32 UNC  M12 X 1<br>Max. Torque 1.12 Nm (10 in–lbf)<br>Accessories<br>Cordsets<br>5-Pin Single-Ended M12 Female Cordsets<br>Model  Length  Style  Dimensions  Pinout (Female)<br>MQDC1-501.5 0.5 m (1.5 ft)<br>2<br>MQDC1-503 0.9 m (2.9 ft)  44 Typ. 1<br>MQDC1-506 2 m (6.5 ft)  3<br>MQDC1-515 5 m (16.4 ft)  Straight  4 5<br>MQDC1-530 9 m (29.5 ft)  M12 x 1 1 = Brown 2 = White<br>ø 14.5 3 = Blue<br>MQDC1-560 18 m (59 ft)  4 = Black<br>5 = Gray<br>MQDC1-5100 31 m (101.7 ft)<br>Continued on page 5<br>**----- End of picture text -----**<br>


page 4 of 6 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

23-Jun-25 

EZ-LIGHT® Indicators — 4-Color, Multi-Function 

**==> picture [500 x 144] intentionally omitted <==**

**----- Start of picture text -----**<br>
Continued from page 4<br>5-Pin Single-Ended M12 Female Cordsets<br>Model  Length  Style  Dimensions  Pinout (Female)<br>MQDC1-506RA 2 m (6.5 ft)<br>32 Typ.<br>MQDC1-515RA 5 m (16.4 ft)  [1.26"]<br>MQDC1-530RA 9 m (29.5 ft)<br>30 Typ.<br>Right-Angle  [1.18"]<br>MQDC1-560RA 19 m (62.3 ft)<br>M12 x 1<br>ø 14.5 [0.57"]<br>**----- End of picture text -----**<br>


## Brackets 

Brackets for K80L models 

## SMBDX80DIN 

- Black reinforced thermoplastic 89 

- • Bracket for mounting on a 35 mm DIN rail 89 

## Brackets for K50L and K50FL models 

- 45 

- • Right-angle bracket with curved slot for versatile orientation •• Clearance for M6 (¼ in) hardwareMounting hole for 30 mm sensor 61 C • 12-gauge stainless steel B A 

- Hole center spacing: A to B=40 Hole size: A=ø 6.3, B= 27.1 × 6.3, C=ø 30.5 69 83.2 

- • Swivel bracket with tilt and pan movement for precise adjustment • Mounting hole for 30 mm sensor • 12-gauge 304 stainless steel • Easy sensor mounting to extrude rail T-slot • Metric- and inch-size bolt available 36.3 B 68.9 A 

## SMB30A 

## SMB30FA 

Bolt thread: SMB30FA, A= 3/8 - 16 × 2 in; SMB30FAM10, A= M10 - 1.5 × 50 Hole size: B= ø 30.1 

## SMB30FVK 

- V-clamp, flat bracket and fasteners for mounting to pipe or extensions 

- • Clamp accommodates 28 mm dia. tubing or 1 in. square extrusions • 30 mm hole for mounting sensors 

**==> picture [61 x 23] intentionally omitted <==**

**----- Start of picture text -----**<br>
46<br>118<br>A<br>**----- End of picture text -----**<br>


Hole size: A= ø 31 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

page 5 of 6 

23-Jun-25 

EZ-LIGHT® Indicators — 4-Color, Multi-Function 

- 70 57 

- • 12-gauge stainless steel bracket with curved mounting slots for versatile orientation • Clearance for M6 (¼ in) hardware C • Mounting hole for 30 mm sensor 57 B 

- Hole center spacing: A = 51, A to B = 25.4 Hole size: A = 42.6 × 7, B = ø 6.4, C = ø 30.1 A A 

- • V-clamp, right-angle bracket and fasteners for mounting sensors to pipe or extrusion • Clamp accommodates 28 mm dia. tubing or 1 in. square extrusions 46 • 30 mm hole for mounting sensors 

- Hole size: A = ø 30.5 57 90 

## SMB30MM 

## SMB30RAVK 

67 • Swivel bracket with 30 mm mounting hole for sensor B •• Black reinforced thermoplastic polyesterStainless steel mounting and swivel locking hardware included 58 Hole center spacing: A=ø 50.8 Hole size: A=ø 7.0, B=ø 30.0 29 A 

## SMB30SC 

- 45 

- • Flat SMBAMS series bracket C • 30 mm hole for mounting sensors • Articulation slots for 90°+ rotation A • 12-gauge 300 series stainless steel 93 B 

- Hole center spacing: A=26.0, A to B=13.0 Hole size: A=26.8 × 7.0, B=ø 6.5, C=ø 31.0 45 

- • Right-angle SMBAMS series bracket C • 30 mm hole for mounting sensors • Articulation slots for 90°+ rotation 53 A • 12-gauge (2.6 mm) cold-rolled steel B 

- Hole center spacing:Hole size: A=26.8 × 7.0, B=ø 6.5, C=ø 31.0 A=26.0, A to B=13.0 48 

## SMBAMS30P 

## SMBAMS30RA 

NOTE: K50FL models include a 48 mm (1.9 in) circular velcro mounting kit for easy mounting with no additional hardware. 

## Banner Engineering Corp Limited Warranty 

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. 

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. 

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. 

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. 

For patent information, see www.bannerengineering.com/patents. 

page 6 of 6 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

23-Jun-25