K50LGRWA120Q

EZ-LIGHT® Indicators—85 V AC to 130 V AC 

## Features 

AC-operated, multi-color, general-purpose indicators 

- Rugged, cost-effective, and easy-to-install indicators available in K50 or K80 housing style 

- Illumination provides easy-to-see operator guidance and equipment status indication 

- Compact devices are completely self-contained, no controller needed 

- • 85 V AC to 130 V AC operation • Displays 3 colors • Immune to ambient light, EMI, and RFI interference 

**==> picture [208 x 30] intentionally omitted <==**

**----- Start of picture text -----**<br>
QPMA<br> Contact Banner Engineering for more information.<br>T<br>FA<br>G<br>C<br>I A<br>L T<br>P IL<br>L O<br>• •<br>A R<br>E P<br>C Y<br>EUROS-TYL UR•CABLE<br>**----- End of picture text -----**<br>


## Models 

**==> picture [488 x 213] intentionally omitted <==**

**----- Start of picture text -----**<br>
Model Construction Connection [(1)] LED Function [(2)] Inputs<br>50 mm dome/ 30 mm mount<br>K50LGRYA120Q<br>polycarbonate Integral 5-pin 1/2 in. 20UNF<br>male quick-disconnect  3 Color: Green, Red, Yellow 85 V AC to 130 V AC<br>50 mm dome/Flat or DIN-mount  connector<br>K80LGRYA120Q<br>polycarbonate<br>Wiring<br>Cabled Models Quick-Disconnect Models Key:<br>1 = Brown<br>2 = White<br>ee nr’ 3 =Yellow<br>@}=)+—___ 4 = Black<br>5 = Blue<br>G = Green<br>R = Red<br>Y = Yellow<br>X = V AC Neutral<br>@L ie)) N.C. Z = Input 85 V AC to 130<br>V AC<br>N.C. = Not Used<br>**----- End of picture text -----**<br>


## Wiring 

## Specifications 

Supply Voltage and Current Environmental Rating 85 AC to 130 V AC at 15 mA maximum Rated IP67. K50L models fully encapsulated; K80L has encapsulated electronics only. K50L quick-disconnect models Supply Protection Circuitry meet IP69K, per DIN 40050-9; cabled models also meet Protected against transient voltages IP69K if the cable and cable entrance are protected from highIndicators pressure spray. LEDs are independently selected: Green, Red, or Yellow. Input Response Time Indicator ON/OFF: 1 ms max. 

- (1) Integral quick-disconnect (QD) connector models are listed. 

   - For 150 mm PVC with QD, replace Q with QP in model number (example, K50LGRYA120QP ). 

   - For 2 m (6.5 ft) PVC cable, omit suffix Q from model number (example, K50LGRYA120 ). 

   - A model with a QD requires a mating cable (see ) 

- (2) Contact Banner Engineering for other colors and color combinations. 

Original Instructions 18-Jun-25 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

p/n: 134548 Rev. D 

EZ-LIGHT® Indicators—85 V AC to 130 V AC 

## Certifications 

## Required Overcurrent Protection 

## K50L and K80L models: 

Banner Engineering BV Park Lane, Culliganlaan 2F bus 3 1831 Diegem, BELGIUM 

WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. 

K50L models only: 

Overcurrent protection is required to be provided by end product application per the supplied table. 

## Connections 

Integral 5-pin 1/2 in. 20UNF male quick-disconnect connector, 150 mm (6 in) PVC-jacketed cable with a 5-pin 1/2 in. 20UNF male quick-disconnect connector (QP), or 2 m (6.5 ft) integral PVC-jacketed cable, depending on model 

K80L models: terminal-wired models available for use with bulk cable; compression fitting optional. Contact Banner Engineering for cable information. 

## Operating Conditions 

–40 °C to +50 °C (–40 °F to +122 °F) 

90% at +55 °C maximum relative humidity (non-condensing) 

Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. Supply wiring leads < 24 AWG shall not be spliced. 

For additional product support, go to www.bannerengineering.com. 

|Supply<br>Wiring<br>(AWG)<br>20|Required Overcurrent<br>Protection (A)<br>5.0|Required Overcurrent<br>Protection (A)<br>5.0|Supply<br>Wiring<br>(AWG)<br>26|Required Overcurrent<br>Protection (A)<br>1.0|Required Overcurrent<br>Protection (A)<br>1.0|
|---|---|---|---|---|---|
|22|3.0||28|0.8||
|24|1.0||30|0.5||



## Dimensions 

All measurements are listed in millimeters [inches], unless noted otherwise. The measurements provided are subject to change. 

**==> picture [469 x 206] intentionally omitted <==**

**----- Start of picture text -----**<br>
K50L Models K80L Models<br>50.0 mm<br>(1.97")<br>80.8 mm<br>(3.18")<br>. oN a 109.5 mm<br>65.0 mm<br> 38 mm (1.50")* 66.3 mm (4.31")<br>M30 x 1.5 (2.56") (2.61")<br>(mounting nut<br>included)<br>Max. Torque 4.5 Nm<br>(40 in-lbf)<br>20 mm (0.79")<br>65.0 mm<br>Internal Threads<br>(2.56")<br>½ - 14 NPSM  11 mm (0.43")<br>Max. Torque 2.25 Nm<br>(20 in-lbf)<br>Internal Threads ½ - 14 NPSM<br>4X Ø 5.5 mm (Ø 0.22")  Max. Torque 2.25 Nm (20 in–lbf)<br>Max. Torque 1.12 Nm (10 in–lbf)<br>with supplied screws 26.0 mm<br>4X 8–32 UNC  \E (1.02")M12 X 1<br>Max. Torque 1.12 Nm (10 in–lbf)<br>**----- End of picture text -----**<br>


page 2 of 4 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

18-Jun-25 

EZ-LIGHT® Indicators—85 V AC to 130 V AC 

## Accessories 

## Cordsets 

**==> picture [500 x 210] intentionally omitted <==**

**----- Start of picture text -----**<br>
5-Pin Single-Ended 1/2-in Dual Key Female Shielded Cordsets<br>Model  Length  Style  Dimensions  Pinout (Female)<br>MQVR3S-506 2 m (6.56 ft)  42 Typ.<br>MQVR3S-515 5 m (16.4 ft)<br>Straight<br>1/2-20 UNF-2B<br>MQVR3S-530 10 m (32.8 ft)<br>ø 14.5 3 4<br>MQVR3S-506RA 2 m (6.56 ft)  2<br>38 mm max. 1 5<br>MQVR3S-515RA 5 m (16.4 ft)<br>1 = Brown<br>2 = White<br>3 = Yellow<br>Right Angle  38 mmmax. 4 = Black 5 = Blue<br>MQVR3S-530RA 10 m (32.8 ft)<br>1/2-20UNF-2B<br>ø 15 mm<br>**----- End of picture text -----**<br>


## Brackets 

All measurements are listed in millimeters, unless noted otherwise. The measurements provided are subject to change. 

- 45 

- SMB30A • Right-angle bracket with curved slot for versatile orientation •• Clearance for M6 (¼ in) hardwareMounting hole for 30 mm sensor 61 C • 12-gauge stainless steel B A 

- Hole center spacing: A to B=40 Hole size: A=ø 6.3, B= 27.1 × 6.3, C=ø 30.5 69 67 

- SMB30SC • Swivel bracket with 30 mm mounting hole for sensor B •• Black reinforced thermoplastic polyesterStainless steel mounting and swivel locking hardware included 58 

- Hole center spacing: A=ø 50.8 Hole size: A=ø 7.0, B=ø 30.0 29 A 

- SMB30FA 83.2 • Swivel bracket with tilt and pan movement for precise adjustment • Mounting hole for 30 mm sensor • 12-gauge 304 stainless steel • Easy sensor mounting to extrude rail T-slot • Metric- and inch-size bolt available 36.3 B 68.9 A 

- Bolt thread: SMB30FA, A= 3/8 - 16 × 2 in; SMB30FAM10, A= M10 - 1.5 × 50 Hole size: B= ø 30.1 45 

- SMBAMS30P • Flat SMBAMS series bracket C • 30 mm hole for mounting sensors • Articulation slots for 90°+ rotation A • 12-gauge 300 series stainless steel 93 B 

Hole center spacing: A=26.0, A to B=13.0 Hole size: A=26.8 × 7.0, B=ø 6.5, C=ø 31.0 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

page 3 of 4 

18-Jun-25 

EZ-LIGHT® Indicators—85 V AC to 130 V AC 

**==> picture [500 x 365] intentionally omitted <==**

**----- Start of picture text -----**<br>
70 57<br>SMB30MM<br>• 12-gauge stainless steel bracket with curved mounting slots for versatile orientation<br>• Clearance for M6 (¼ in) hardware C<br>• Mounting hole for 30 mm sensor 57<br>B<br>Hole center spacing:  A = 51, A to B = 25.4<br>Hole size:   A = 42.6 × 7, B = ø 6.4, C = ø 30.1<br>A<br>SMBAMS30RA 45<br>• Right-angle SMBAMS series bracket C<br>• 30 mm hole for mounting sensors<br>• Articulation slots for 90°+ rotation 53 A<br>• 12-gauge (2.6 mm) cold-rolled steel B<br>Hole center spacing:Hole size:  A=26.8 × 7.0, B=ø 6.5, C=ø 31.0 A=26.0, A to B=13.0 48<br>55<br>35<br>LMBE12RA35 38.25<br>• Direct mounting of stand-off pipe, with common bracket type<br>• Zinc-plated steel<br>• 1/2-14 NPSM nut<br>• Mounting distance from the wall to the center of the 1/2-14 NPSM nut is 35 mm<br>57<br>Hole center spacing: 20.0<br>2X Ø9<br>65<br>45<br>LMBE12RA45 38.25<br>• Direct mounting of stand-off pipe, with common bracket type<br>• Zinc-plated steel<br>• 1/2-14 NPSM nut<br>• Mounting distance from the wall to the center of the 1/2-14 NPSM nut is 45 mm<br>81<br>Hole center spacing: 35.0<br>2X Ø11<br>**----- End of picture text -----**<br>


**==> picture [500 x 127] intentionally omitted <==**

**----- Start of picture text -----**<br>
For K80L<br>SMBDX80DIN<br>• Black reinforced thermoplastic  89<br>• Bracket for mounting on a 35 mm DIN rail<br>89<br>**----- End of picture text -----**<br>


## Banner Engineering Corp Limited Warranty 

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. 

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. 

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. 

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. 

For patent information, see www.bannerengineering.com/patents. 

page 4 of 4 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

18-Jun-25