K50LDGA120Q

EZ-LIGHT® K50LD Daylight Visible Indicators (AC) 

## Features 

## AC-Operated Indicators for Outdoor Applications 

To view or download the latest technical information about this product, including specifications, dimensions, accessories, and wiring, go to www.bannerengineering.com. 

      - Intense levels of light output for outdoor applications 

      - • Controlled field of view for signage and narrow lane use • May also be used for low-cost vision sensor illumination • Rugged, cost-effective, and easy to install • Compact devices are completely self-contained, no controller needed • Immune to EMI and RFI interference • 50 mm (2 in) diameter with flat profile and 30 mm (1.2 in) mounting base • 85 V AC to 130 V AC operation 

- WARNING: • Do not use this device for personnel protection • Using this device for personnel protection could result in serious injury or death. 

   - This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A device failure or malfunction can cause either an energized (on) or de-energized (off) output condition. 

## Models 

NOTE: Optional sun shield model K50DS is available for enhanced visibility in desert sun brightness levels (see Sun Shields). 

**==> picture [421 x 77] intentionally omitted <==**

**----- Start of picture text -----**<br>
Model  [(1)] LED Function Inputs<br>K50LDGA120Q 1 Color: Green<br>K50LDRA120Q 1 Color: Red<br>K50LDYA120Q 1 Color: Yellow 85 V AC to 130 V AC<br>K50LDWA120Q 1 Color: White<br>K50LDBA120Q 1 Color: Blue<br>**----- End of picture text -----**<br>


## Wiring 

**==> picture [363 x 74] intentionally omitted <==**

**----- Start of picture text -----**<br>
Quick-Disconnect Models Cabled Models<br>2 wh (3)<br>00 + Wiring Key: -<br>3 1 = Green (not used)<br>|) ee —_ 2 = Red/Black<br>1 bk (1)<br>3 = Red/White<br>)— o— +<br>**----- End of picture text -----**<br>


- (1) 

Integral quick-disconnect connector models are listed. 

- To order the 2 m (6.5 ft) cable model, omit the suffix Q from model number (example, K50LDGA120 ). 

- Models with a quick-disconnect connector require a mating cordset (see Accessories). 

Original Instructions 30-Jun-25 

© Banner Engineering Corp. All rights reserved. 

www.bannerengineering.com 

p/n: 152843 Rev. E 

EZ-LIGHT® K50LD Daylight Visible Indicators (AC) 

## Specifications 

## Supply Voltage and Current 

85 V AC to 130 V AC, or 75 V DC to 120 V DC, at 16 mA maximum 

## Supply Protection Circuitry 

Protected against transient voltages 

Indicators 

**==> picture [221 x 101] intentionally omitted <==**

**----- Start of picture text -----**<br>
Color Typical Wavelength or Color  Typical Intensity (lm)<br>Temperature<br>Green 525 nm 14<br>Red 625 nm 4<br>Yellow 590 nm 5<br>Blue 470 nm 5<br>White 6200 K 12<br>**----- End of picture text -----**<br>


## Input Response Time 

Indicator ON/OFF: 500 μs maximum 

## Construction 

Polycarbonate, 30 mm mount 

## Connections 

Integral 3-pin 1/2 in. 20UNF male quick-disconnect connector or 2 m (6.5 ft) integral PVC-jacketed cable, depending on model 

## Environmental Rating 

Fully encapsulated, IP67 

## Operating Conditions 

–40 °C to +50 °C (–40 °F to +122 °F) 90% at +55 °C maximum relative humidity (non-condensing) 

Certifications 

Banner Engineering BV Park Lane, Culliganlaan 2F bus 3 1831 Diegem, BELGIUM 

## Dimensions 

All measurements are listed in millimeters [inches], unless noted otherwise. The measurements provided are subject to change. 

**==> picture [54 x 10] intentionally omitted <==**

**----- Start of picture text -----**<br>
Ø50 mm (1.97")<br>**----- End of picture text -----**<br>


**==> picture [111 x 115] intentionally omitted <==**

**==> picture [311 x 113] intentionally omitted <==**

**----- Start of picture text -----**<br>
13 mm<br>(0.51")<br>49.5 mm<br>(1.95")<br>20 mm<br>(0.79") M30 × 1.5<br>(mounting nut included)<br>max. torque 4.5 Nm (40 lbs/in.)<br>11 mm<br> Internal Threads<br>(0.43")<br>½- 14 NPSM<br>M12 × 1<br>**----- End of picture text -----**<br>


page 2 of 5 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

30-Jun-25 

EZ-LIGHT® K50LD Daylight Visible Indicators (AC) 

## Percent of Maximum Intensity vs Viewing Angle 

X: Viewing Angle (Deg) Y: Intensity (Percent) 

## Accessories 

**==> picture [460 x 171] intentionally omitted <==**

**----- Start of picture text -----**<br>
3-pin Single-Ended 1/2-in Dual Key Female Cordsets<br>Model  Length  Style  Dimensions  Pinout (Female)<br>MQDC-306 2 m (6.56 ft)  42 Typ.<br>MQDC-315 5 m (16.40 ft)<br>Straight  [fl<br>MQDC-330 9 m (29.53 ft)  1/2-20 UNF-2B<br>ø 14.5<br>MQDC-306RA 1.83 m (6 ft)<br>32 Typ<br>MQDC-315RA 4.57 m (15 ft)  a .<br>1 = Green<br>2 = Red/Black<br>(=a 28 Typ 3 = Red/White<br>Right-Angle<br>MQDC-330RA 9.14 m (30 ft)<br>1/2-20 UNF-2B<br>ø 14.5<br>**----- End of picture text -----**<br>


## Mounting Brackets 

- 45 

- SMB30A • Right-angle bracket with curved slot for versatile orientation •• Clearance for M6 (¼ in) hardwareMounting hole for 30 mm sensor 61 C • 12-gauge stainless steel B A 

- Hole center spacing: A to B=40 Hole size: A=ø 6.3, B= 27.1 × 6.3, C=ø 30.5 69 SSSsO 

- SMBAMS30RA 45 • Right-angle SMBAMS series bracket C • 30 mm hole for mounting sensors ‘Ca • Articulation slots for 90°+ rotation 53 A • 12-gauge (2.6 mm) cold-rolled steel (2 B 

- Hole center spacing:Hole size: A=26.8 × 7.0, B=ø 6.5, C=ø 31.0 A=26.0, A to B=13.0 48 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

page 3 of 5 

30-Jun-25 

EZ-LIGHT® K50LD Daylight Visible Indicators (AC) 

**==> picture [451 x 240] intentionally omitted <==**

**----- Start of picture text -----**<br>
45<br>SMBAMS30P<br>•• Flat SMBAMS series bracket30 mm hole for mounting sensors fa C<br>• Articulation slots for 90°+ rotation O) A<br>• 12-gauge 300 series stainless steel 93<br>B<br>Hole center spacing:  A=26.0, A to B=13.0<br>Hole size:  A=26.8 × 7.0, B=ø 6.5, C=ø 31.0<br>67<br>SMB30SC<br>• Swivel bracket with 30 mm mounting hole for sensor B<br>•• Black reinforced thermoplastic polyesterStainless steel mounting and swivel locking hardware included 58 ly:<br>Hole center spacing:  A=ø 50.8<br>Hole size:  A=ø 7.0, B=ø 30.0 Nasi 29 A<br>70 57<br>SMB30MM<br>•• 12-gauge stainless steel bracket with curved mounting slots for versatile orientationClearance for M6 (¼ in) hardware pe C<br>• Mounting hole for 30 mm sensor 57<br>B<br>Hole center spacing:Hole size:   A = 42.6 × 7, B = ø 6.4, C = ø 30.1 A = 51, A to B = 25.4 AN 57<br>A<br>**----- End of picture text -----**<br>


**==> picture [455 x 304] intentionally omitted <==**

**----- Start of picture text -----**<br>
67<br>SMB3018SC B<br>•• 18 mm swivel side or barrel-mount bracketBlack reinforced thermoplastic polyester 59 AD<br>• Stainless steel swivel locking hardware included<br>Hole center spacing:  A = 50.8<br>Hole size:  A = ø 7.0, B = ø 18.0<br>29 He<br>A<br>55<br>LMBE12RA35 35 38.25<br>• Direct mounting of stand-off pipe, with common bracket type<br>• Zinc-plated steel  re<br>• 1/2-14 NPSM nut<br>• Mounting distance from the wall to the center of the 1/2-14 NPSM nut is 35 mm<br>NPSM NUT 57<br>Hole center spacing:  20.0 a)<br>2X Ø9<br>1/2-14 5]<br>65<br>45<br>LMBE12RA45 38.25<br>• Direct mounting of stand-off pipe, with common bracket type<br>•• Zinc-plated steel 1/2-14 NPSM nut  ——>,<br>• Mounting distance from the wall to the center of the 1/2-14 NPSM nut is 45 mm<br>NPSM NUT 81<br>Hole center spacing:  35.0<br>2X Ø11 8)<br>112-14 A<br>**----- End of picture text -----**<br>


## Sun Shields 

K50DS 

- Use for enhanced visibility in desert sun brightness levels 

- • Thermoplastic polyester 

page 4 of 5 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

30-Jun-25 

EZ-LIGHT® K50LD Daylight Visible Indicators (AC) 

## K90DS 

- Use for enhanced visibility in direct sunlight conditions 

- • Polycarbonate 

## Banner Engineering Corp Limited Warranty 

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. 

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. 

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. 

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. 

For patent information, see www.bannerengineering.com/patents. 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

page 5 of 5 

30-Jun-25