K50FLGRY6P

K50 Series I/O Block Compatible 

## Features 

50mm Multicolor LED Indicator 

- Bright, uniform indicator light 

- • Rugged IP69K per ISO 20653 and IP67-rated design • 18 V DC to 30 V DC operation • Operate up to three colors using only 2 inputs • Up to six colors to choose from • PNP or NPN models available • Variety of connector options 

## Models 

**==> picture [493 x 96] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||||||
|---|---|---|---|---|---|---|
|Family|LED Color|Function|Input|Connector|
|K50L|G|R|Y|6|P|Q|
|G = Green|
|Blank = 2 m (6.5 ft) integral PVC-jacketed cable|
|R = Red|
|Q = Integral 5-pin M12 male quick-disconnect connector|
|K50L|Y = Yellow|P = PNP|
|6 = I/O Block|
|QP = 150 mm (6 in) PVC-jacketed cable with a 5-pin M12|
|K50FL|B = Blue|Compatible|N = NPN|male quick-disconnect connector|
|W = White|QPMA = 150 mm (6 in) PUR-jacketed cable with a 5-pin M12|
|male quick-disconnect connector|

**----- End of picture text -----**<br>


O = Orange 

Wiring 

**==> picture [432 x 119] intentionally omitted <==**

**----- Start of picture text -----**<br>
PNP Input NPN Input<br>IndicatorColor bu (3) IndicatorColor bn (1) Key<br>bk (4) 18-30 V DC bk (4) 18-30 V DC 1 = Brown<br>C1 C1 2 = White<br>wh (2) wh (2) 3 = Blue<br>C2 C2<br>4 = Black<br>C3 Pins 2 & 4 C3 Pins 2 & 4 5 = Gray<br>bn (1) bu (3) C1 = Color 1 (Input Pin 4)<br>C2 = Color 2 (Input Pin 2)<br>gy (5) gy (5) C3 = Color 3 (Inputs to Pins 2 & 4)<br>iP<br>**----- End of picture text -----**<br>


## Specifications 

## Supply Voltage and Current 

- 18 V DC to 30 V DC 

50 mA maximum current at 18 V DC to 30 V DC 

Supply Protection Circuitry Protected against reverse polarity and transient voltages 

Leakage Current Immunity 400 µA 

Input Response Time Indicator On: 250 ms maximum Indicator Off: 10 ms maximum 

## Connections 

Integral 5-pin M12 male quick-disconnect connector, or 150 mm (6 in) PVC-jacketed cable with a quick disconnect , or 2 m (6.5 ft) integral PVC-jacketed cable, depending on model 

Construction Base and dome: Polycarbonate 

Mounting M30 × 1.5 threaded base, maximum torque 4.5 N·m (40 in-lbf) 

Mounting nut included 

## Indicator Characteristics 

**==> picture [131 x 95] intentionally omitted <==**

**----- Start of picture text -----**<br>
Dominant Wavelength (nm)  Lumen Output<br>Color or Color Temperature  (Typical at 25<br>(CCT) °C)<br>Green 528 nm 20<br>Red 625 nm 6<br>Yellow 590 nm 20<br>Blue 470 nm 5<br>Orange 608 nm 11<br>White 6000 K 16<br>**----- End of picture text -----**<br>


Certifications 

Banner Engineering BV Park Lane, Culliganlaan 2F bus 3 1831 Diegem, BELGIUM 

Environmental Rating 

QD models meet IP69K per ISO 20653 Cable models rated IP67 

NOTE: Cable models meet IP69K per ISO 20653 if the cable and cable entrance is protected from highpressure spray. 

Original Instructions 10-Jun-25 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

p/n: 196759 Rev. C 

K50 Series I/O Block Compatible 

## Vibration and Mechanical Shock 

All models meet MIL-STD-202F, Method 201A (Vibration: 10 Hz to 60 Hz maximum, 0.06 inch (1.52 mm) double amplitude, 10G maximum acceleration) requirements. Also meets IEC 60947-5-2 (Shock: 30G 11 ms duration, half sine wave) requirements. 

Operating Conditions –40 °C to +50 °C (–40 °F to +122 °F) 

## Required Overcurrent Protection 

**==> picture [133 x 87] intentionally omitted <==**

**----- Start of picture text -----**<br>
WARNING:  Electrical<br>connections must be<br>made by qualified<br>personnel in<br>accordance with local<br>and national electrical<br>codes and<br>regulations.<br>Overcurrent protection is required to be provided<br>by end product application per the supplied table.<br>**----- End of picture text -----**<br>


**==> picture [136 x 110] intentionally omitted <==**

**----- Start of picture text -----**<br>
Overcurrent protection may be provided with<br>external fusing or via Current Limiting, Class 2<br>Power Supply.<br>Supply wiring leads < 24 AWG shall not be spliced.<br>For additional product support, go<br>to www.bannerengineering.com.<br>Supply  Required  Supply  Required<br>Wiring  Overcurrent  Wiring  Overcurrent<br>(AWG) Protection (A) (AWG) Protection (A)<br>20 5.0 26 1.0<br>22 3.0 28 0.8<br>24 1.0 30 0.5<br>**----- End of picture text -----**<br>


## Dimensions 

All measurements are listed in millimeters [inches], unless noted otherwise. The measurements provided are subject to change. 

**==> picture [452 x 158] intentionally omitted <==**

**----- Start of picture text -----**<br>
K50L Models K50FL Models<br>50.0<br>[1.97"] 44.6 [1.76"]<br>Ø50 [1.97"]<br> 38 [1.50"]<br>M30 x 1.5<br>(mounting nut  60.0<br>included) [2.36"]<br>Max. Torque 4.5 Nm  35.0<br>(40 in-lbf) i" [1.38"] FT<br>20 [0.79"]<br>Internal Threads<br>½ - 14 NPT  11 [0.43"] 2x 5.0 [0.20"]<br>Max. Torque 2.25 Nm 16.0 [0.63"] 2x 5.5 [0.21"]<br>(20 in-lbf) 17.0 [0.67"]<br>UE | 2x 5.0 [0.20"]<br>40.0 [1.58"]<br>**----- End of picture text -----**<br>


## Accessories 

## Cordsets 

**==> picture [471 x 259] intentionally omitted <==**

**----- Start of picture text -----**<br>
4-Pin Single-Ended M12 Female Cordsets<br>Model  Length  Style  Dimensions  Pinout (Female)<br>MQDC-406 2 m (6.56 ft)  44 Typ.<br>MQDC-415 5 m (16.4 ft)<br>MQDC-430 9 m (29.5 ft)  2<br>1<br>M12 x 1<br>Straight  ) aaa ø 14.5 3<br>Ø5.2 mm 4 5<br>MQDC-450 15 m (49.2 ft)  =<br>7 mm<br>58 mm 1 = Brown<br>2 = White<br>3 = Blue<br>MQDC-406RA 2 m (6.56 ft)  32 Typ. 4 = Black<br>MQDC-415RA 5 m (16.4 ft)  [1.26"] 5 = Not used<br>MQDC-430RA 9 m (29.5 ft)  _f-<br>se | 30 Typ.[1.18"] 2 3 °<br>1<br>Right-Angle  4<br>M12 x 1<br>MQDC-450RA 15 m (49.2 ft)  ø 14.5 [0.57"] =<br>Ø5.2 mm =a<br>a<br>7 mm<br>58 mm<br>**----- End of picture text -----**<br>


© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

page 2 

10-Jun-25 

K50 Series I/O Block Compatible 

**==> picture [500 x 225] intentionally omitted <==**

**----- Start of picture text -----**<br>
5-Pin Single-Ended M12 Female Cordsets<br>Model  Length  Style  Dimensions  Pinout (Female)<br>MQDC1-501.5 0.5 m (1.5 ft)<br>MQDC1-503 0.9 m (2.9 ft)  44 Typ.<br>MQDC1-506 2 m (6.5 ft)<br>MQDC1-515 5 m (16.4 ft)  Straight<br>2<br>MQDC1-530 9 m (29.5 ft)  M12 x 1<br>1<br>MQDC1-560 18 m (59 ft)  ø 14.5 3<br>MQDC1-5100 31 m (101.7 ft)  4 5<br>MQDC1-506RA 2 m (6.5 ft)  1 = Brown<br>32 Typ. 2 = White<br>MQDC1-515RA 5 m (16.4 ft)  [1.26"] 3 = Blue<br>4 = Black<br>MQDC1-530RA 9 m (29.5 ft)<br>5 = Gray<br>30 Typ.<br>Right-Angle  [1.18"]<br>MQDC1-560RA 19 m (62.3 ft)<br>M12 x 1<br>ø 14.5 [0.57"]<br>**----- End of picture text -----**<br>


## Brackets 

NOTE: K50FL models include a 48 mm (1.9 in) circular velcro mounting kit for easy mounting with no additional hardware. 

**==> picture [442 x 166] intentionally omitted <==**

**----- Start of picture text -----**<br>
45<br>• Right-angle bracket with curved slot for versatile orientation C<br>• Clearance for M6 (¼ in) hardware 61<br>• Mounting hole for 30 mm sensor<br>• 12-gauge stainless steel B<br>A<br>Hole center spacing:  A to B=40<br>Hole size:  A=ø 6.3, B= 27.1 × 6.3, C=ø 30.5 69<br>83.2<br>• Swivel bracket with tilt and pan movement for precise adjustment<br>• Mounting hole for 30 mm sensor<br>• 12-gauge 304 stainless steel<br>• Easy sensor mounting to extrude rail T-slot<br>• Metric- and inch-size bolt available 36.3 B 68.9<br>A<br>Bolt thread:  SMB30FA, A= 3/8 - 16 × 2 in; SMB30FAM10, A= M10 - 1.5 × 50<br>Hole size:  B= ø 30.1<br>**----- End of picture text -----**<br>


## SMB30A 

## SMB30FA 

**==> picture [429 x 164] intentionally omitted <==**

**----- Start of picture text -----**<br>
46<br>• V-clamp, flat bracket and fasteners for mounting to pipe or extensions 118<br>• Clamp accommodates 28 mm dia. tubing or 1 in. square extrusions A<br>• 30 mm hole for mounting sensors<br> A= ø 31<br>70 57<br>• 12-gauge stainless steel bracket with curved mounting slots for versatile orientation<br>• Clearance for M6 (¼ in) hardware C<br>• Mounting hole for 30 mm sensor 57<br>B<br>Hole center spacing:  A = 51, A to B = 25.4<br> A = 42.6 × 7, B = ø 6.4, C = ø 30.1<br>A<br>**----- End of picture text -----**<br>


## SMB30FVK 

Hole size: A= ø 31 

## SMB30MM 

- Hole center spacing: A = 51, A to B = 25.4 Hole size: A = 42.6 × 7, B = ø 6.4, C = ø 30.1 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

10-Jun-25 

page 3 

K50 Series I/O Block Compatible 

**==> picture [500 x 333] intentionally omitted <==**

**----- Start of picture text -----**<br>
A<br>SMB30RAVK<br>• V-clamp, right-angle bracket and fasteners for mounting sensors to pipe or extrusion<br>• Clamp accommodates 28 mm dia. tubing or 1 in. square extrusions 46<br>• 30 mm hole for mounting sensors<br>Hole size:  A = ø 30.5 57 90<br>67<br>SMB30SC<br>• Swivel bracket with 30 mm mounting hole for sensor B<br>• Black reinforced thermoplastic polyester 58<br>• Stainless steel mounting and swivel locking hardware included<br>Hole center spacing:  A=ø 50.8<br>Hole size:  A=ø 7.0, B=ø 30.0 29<br>A<br>45<br>SMBAMS30P<br>• Flat SMBAMS series bracket C<br>• 30 mm hole for mounting sensors<br>• Articulation slots for 90°+ rotation A<br>• 12-gauge 300 series stainless steel 93 B<br>Hole center spacing:  A=26.0, A to B=13.0<br>Hole size:  A=26.8 × 7.0, B=ø 6.5, C=ø 31.0<br>SMBAMS30RA 45<br>• Right-angle SMBAMS series bracket C<br>• 30 mm hole for mounting sensors<br>• Articulation slots for 90°+ rotation 53 A<br>• 12-gauge (2.6 mm) cold-rolled steel B<br>Hole center spacing:  A=26.0, A to B=13.0 48<br>Hole size:  A=26.8 × 7.0, B=ø 6.5, C=ø 31.0<br>**----- End of picture text -----**<br>


## Banner Engineering Corp Limited Warranty 

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. 

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. 

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. 

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. 

For patent information, see www.bannerengineering.com/patents. 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

10-Jun-25 

page 4