K30LGXXPPB2QP

EZ-LIGHT® K30L Series With Independent Push Button Contact 

## Features 

Compact Indicator with One, Two, or Three Colors and a Momentary Push Button Output 

- Rugged, cost-effective, and easy-to-install multicolor indicator light with pushbutton 

- • Waterproof IP65 construction for washdown environments • Excellent for panel mounting or as a stand-alone device • Immune to EMI and RFI interference • 10 V DC to 30 V DC operation • Cabled and Quick Disconnect models available • Up to three independent colors in one unit 

## WARNING: 

- Do not use this device for personnel protection 

- • Using this device for personnel protection could result in serious injury or death. 

- This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A device failure or malfunction can cause either an energized (on) or de-energized (off) output condition. 

## Models 

**==> picture [490 x 252] intentionally omitted <==**

**----- Start of picture text -----**<br>
Family Color 1 Color 2 Color 3 Input Output Connector [(1)]<br>K30L G R Y P PB2 Q<br>G = Green<br>R = Red<br>Y = Yellow<br>Blank = 2 m (6.5 ft) integral PVC-<br>B = Blue jacketed cable<br>W = White Q = Integral M12 male quick-<br>P = PNP PB2 = Momentary Push  disconnect connector<br>Button<br>O = Orange<br>QP = 150 mm (6 in) PVC-<br>T = Turquoise jacketed cable with an M12 male<br>quick-disconnect connector<br>V = Violet<br>M = Magenta<br>X = No color in this position<br>Example Model # of LED Colors LED Indicators Connection<br>K30LGXXPPB2Q Green<br>1 Integral 4-pin M12 male quick-disconnect connector<br>K30LRXXPPB2Q Red<br>K30LGRXPPB2Q Green, Red<br>2 Integral 5-pin M12 male quick-disconnect connector<br>K30LGYXPPB2Q Green, Yellow<br>K30LGRYPPB2Q 3 Green, Red, Yellow Integral 8-pin M12 male quick-disconnect connector<br>**----- End of picture text -----**<br>


> (1) Integral quick-disconnect connector models are listed. 

- To order the 2 m (6.5 ft) PVC cable model, omit the suffix "Q" in the model number. For example, K30LGXXPPB2 

- To order the 150 mm (6 in) PVC cable model, replace the suffix "Q" with "QP" in the model number. For example, K30LGXXPPB2QP 

- • Models with a quick-disconnect connector require a mating cordset. 

Original Instructions 01-Oct-25 

© Banner Engineering Corp. All rights reserved. 

www.bannerengineering.com 

p/n: 162557 Rev. D 

EZ-LIGHT® K30L Series With Independent Push Button Contact 

## Installation 

Install the K30 at a height and location that is easy for the user and/or supervisor to see the device, and comfortable for the user to press the push-button. 

## Wiring 

**==> picture [500 x 159] intentionally omitted <==**

**----- Start of picture text -----**<br>
4-Pin Models 5-Pin Models<br>PNP Pinout and Key PNP Pinout and Key<br>1 1<br>IndicatorColor bu (3) 2 4 IndicatorColor bu (3) 10-30 V DC 2 4<br>bk (4) 10-30 V DC 3 C1 bk (4) 3 5<br>C1<br>bn (1) 1 = Brown2 = White3 = Blue C2 bn (1) 1 = Brown2 = White3 = Blue<br>PB 4 = Black wh (2) 4 = Black<br>wh (2) C1 = Color 1PB = Push Button PB gy (5) 5 = GrayC1 = Color 1C2 = Color 2<br>PB = Push Button<br>**----- End of picture text -----**<br>


**==> picture [500 x 176] intentionally omitted <==**

**----- Start of picture text -----**<br>
8-Pin Models<br>PNP Pinout and Key<br>1<br>Indicator bu (7) 2 7<br>Color 6<br>10-30 V DC<br>pk (6) 3<br>C1 5<br>4<br>bn (2) 8<br>C2 1 = White<br>2 = Brown<br>C3 ye (4) 3 = Green (not used)4 = Yellow<br>5 = Gray<br>wh (1) 6 = Pink<br>PB 7 = Blue<br>8 = Red (not used)<br>gy (5) C1 = Color 1<br>C2 = Color 2<br>C3 = Color 3<br>PB = Push Button<br>**----- End of picture text -----**<br>


## Specifications 

Supply Voltage and Current 

10 V DC to 30 V DC at 40 mA maximum  per LED color 

Supply Protection Circuitry 

Protected against reverse polarity and transient voltages Indicator Response Time 

ON/OFF: 1 ms maximum 

Switch Contact Rating 150 mA at 30 V DC 

Contact Bounce 10 ms maximum 

Environmental Rating IP65 Enclosure Type 13 

Construction 

Base: polycarbonate Translucent dome: polycarbonate Push button: thermoplastic 

## Connections 

Integral 4-pin, 5-pin, or 8-pin M12 male quick-disconnect connector, 2 m (6.5 ft) integral PVC-jacketed cable, or 150 mm (6 in) PVC-jacketed cable with a 4-pin, 5-pin, or 8-pin M12 quick-disconnect connector, depending on the model ordered 

Operating Conditions 

–40 °C to +50 °C (–40 °F to +122 °F) 

90% at +50 °C maximum relative humidity (non-condensing) Storage Temperature: –40 °C to +70 °C (–40 °F to +158 °F) 

Certifications 

**==> picture [31 x 51] intentionally omitted <==**

Banner Engineering BV Park Lane, Culliganlaan 2F bus 3 1831 Diegem, BELGIUM 

Mounting Torque 2.25 Nm (20 in·lbf) max. 

01-Oct-25 

page 2 of 5 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

EZ-LIGHT® K30L Series With Independent Push Button Contact 

## Required Overcurrent Protection 

WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. 

Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. 

Supply wiring leads < 24 AWG shall not be spliced. For additional product support, go to www.bannerengineering.com. 

|Supply<br>Wiring<br>(AWG)<br>20|Required Overcurrent<br>Protection (A)<br>5.0|Supply<br>Wiring<br>(AWG)<br>26|Required Overcurrent<br>Protection (A)<br>1.0|
|---|---|---|---|
|22|3.0|28|0.8|
|24|2.0|30|0.5|



## Dimensions 

All measurements are listed in millimeters [inches], unless noted otherwise. The measurements provided are subject to change. 

## Accessories 

## Cordsets 

**==> picture [478 x 148] intentionally omitted <==**

**----- Start of picture text -----**<br>
4-Pin Single-Ended M12 Female Cordsets<br>Model  Length  Style  Dimensions  Pinout (Female)<br>MQDC-403 1 m (3.28 ft)<br>44 Typ.<br>MQDC-406 2 m (6.56 ft)<br>MQDC-410 3 m (9.8 ft)<br>2 1 = Brown 2 = White<br>MQDC-415 5 m (16.4 ft)  M12 x 1 1 3 = Blue<br>4 = Black<br>MQDC-430 9 m (29.5 ft)  Straight  (Sti ø 14.5 | : 3 5 = Not used<br>MQDC-450 15 m (49.2 ft)  Ø5.2 mm 4 5<br>MQDC-460 18.3 m (60 ft)  Ss Opus<br>7 mm<br>MQDC-470 21 m (68.9 ft)  58 mm<br>MQDC-4100 30 m (98.43 ft)<br>**----- End of picture text -----**<br>


01-Oct-25 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

page 3 of 5 

EZ-LIGHT® K30L Series With Independent Push Button Contact 

**==> picture [500 x 384] intentionally omitted <==**

**----- Start of picture text -----**<br>
5-Pin Single-Ended M12 Female Cordsets<br>Model  Length  Style  Dimensions  Pinout (Female)<br>MQDC1-501.5 0.5 m (1.5 ft)<br>MQDC1-503 0.9 m (2.9 ft)  44 Typ.<br>MQDC1-506 2 m (6.5 ft)<br>MQDC1-515 5 m (16.4 ft)  Straight<br>MQDC1-530 9 m (29.5 ft)  M12 x 1 2<br>ø 14.5 1<br>MQDC1-560 18 m (59 ft)  3<br>MQDC1-5100 31 m (101.7 ft)  4 5<br>MQDC1-506RA 2 m (6.5 ft)  1 = Brown<br>32 Typ. 2 = White<br>MQDC1-515RA 5 m (16.4 ft)  [1.26"] 3 = Blue 4 = Black<br>MQDC1-530RA 9 m (29.5 ft)  5 = Gray<br>30 Typ.<br>Right-Angle  [1.18"]<br>MQDC1-560RA 19 m (62.3 ft)<br>M12 x 1<br>ø 14.5 [0.57"]<br>8-Pin Single-Ended M12 Female Shielded Cordsets<br>Model  Length  Style  Dimensions  Pinout (Female)<br>2<br>3<br>44 Typ. 1 4<br>MQDC-806 2 m (6.56 ft)  7<br>5<br>6<br>Straight  8<br>M12 x 1<br>ø 14.5<br>MQDC-815 5 m (16.4 ft)  1 = White  5 = Gray<br>2 = Brown  6 = Pink<br>3 = Green  7 = Blue<br>MQDC-830 9 m (29.53 ft)  4 = Yellow  8 = Shield<br>**----- End of picture text -----**<br>


## Brackets 

**==> picture [433 x 97] intentionally omitted <==**

**----- Start of picture text -----**<br>
32<br>• Right-angle bracket with curved slot for versatile orientation  C<br>• 12-ga. stainless steel  41<br>• Mounting hole for 22 mm sensor  B<br>A<br>Hole center spacing:  A to B = 26.0<br>Hole size:  A = ø 4.6, B = 4.6 x 16.9, C = 22.2 46<br>**----- End of picture text -----**<br>


## SMB22A 

## Banner Engineering Corp Limited Warranty 

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. 

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. 

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. 

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. 

01-Oct-25 

page 4 of 5 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

EZ-LIGHT® K30L Series With Independent Push Button Contact 

Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. 

For patent information, see www.bannerengineering.com/patents. 

01-Oct-25 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

page 5 of 5