K30L2GRYPQ-803685

K30 Pro Indicator 

## Features 

30 mm Programmable Multicolor RGB Indicator with Flashing Input Control 

- Bright, uniform indicator light 

- • Seven default colors in one device (Green, Red, Yellow, Blue, White, Cyan, Magenta) • Programmable using Banner's Pro Editor software and Pro Converter Cable • 22 mm threaded polycarbonate base • Translucent polycarbonate dome • Rugged IP67, IP69K per ISO 20653, UL Type 12, and UL Type 4X and UL Type 13 design • Bimodal inputs (PNP/NPN), depending on source wiring • All models have flashing input control • Variety of connector options • Terminal connection models available for panel wiring applications 

## Pro Editor 

Use Banner's Pro Editor software and Pro Converter Cable to create custom configurations by selecting different colors, flash patterns, and animations. For more information visit www.bannerengineering.com/proeditor. 

## Models 

**==> picture [450 x 84] intentionally omitted <==**

**----- Start of picture text -----**<br>
Family Material Color and Input Connector [(1)]<br>K30L2 RGB7 Q<br>Blank = 2 m (6.5 ft) integral PVC-jacketed cable<br>Q = Integral 5-pin M12 male quick-disconnect connector<br>Blank = Standard RGB7 = RGB multicolor (7<br>colors) QP = 150 mm (6 in) PVC-jacketed cable with a 5-pin M12 male quick-disconnect<br>connector<br>T = Terminal screw<br>**----- End of picture text -----**<br>


## Wiring 

**==> picture [433 x 108] intentionally omitted <==**

**----- Start of picture text -----**<br>
PNP NPN<br>bu (3) bu (3)<br>- +<br>10–30 V DC 10–30 V DC 1<br>bk (4) bk (4)<br>1 1 2<br>2 bn (1) 2 bn (1) 4<br>OK OK 3 NS 5<br>wh (2) wh (2)<br>3 3 Gray wire (flashing input)<br>gy (5) gy (5)<br>C) F _ C) F =<br>OF Or<br>**----- End of picture text -----**<br>


(1) Models with a quick-disconnect connector require a mating cordset. 

Original Instructions 29-Sep-25 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

p/n: 197814 Rev. H 

K30 Pro Indicator 

## Default Color Definition 

**==> picture [500 x 58] intentionally omitted <==**

**----- Start of picture text -----**<br>
Red Yellow Green Cyan Blue Magenta White<br>Input 1 X X X X<br>Input 2 X X X X<br>Input 3 X X X X<br>**----- End of picture text -----**<br>


An "X" denotes an active input, for example when Input 1 and Input 3 are active, the indicator will show Magenta. 

## Specifications 

## Supply Voltage and Current 

10 V DC to 30 V DC 

- 60 mA at 10 V DC 

- • 50 mA at 12 V DC • 35 mA at 24 V DC • 30 mA at 30 V DC 

## Supply Protection 

Protected against reverse polarity and transient voltages 

Leakage Current Immunity 400 µA 

Input Response Time 250 milliseconds maximum 

## Flash 

Default 1.5 Hz flash rate through flash input wire 

## Vibration and Mechanical Shock 

Meets IEC 60068-2-6 requirements (Vibration: 10 Hz to 55 Hz, 1.0 mm amplitude, 5 minutes sweep, 30 minutes dwell) Meets IEC 60068-2-27 requirements (Shock: 30G 11 ms duration, half sine wave) 

Operating Conditions 

- –40 °C to +50 °C (–40 °F to +122 °F) 

90% at +50 °C maximum relative humidity (non-condensing) Storage Temperature: –40 °C to +70 °C (–40 °F to +158 °F) 

## Environmental Rating 

IP67, IP69K per ISO 20653. Cabled models also meet IP69K per ISO 20653 if the cable and cable entrance are protected from high-pressure spray. Indicator side of terminal models meet IP69K per ISO 20653 when installed in an enclosure. 

Screw connection points meet IP00. 

Meets UL Type 12. 

Meets UL Type 4X and UL Type 13 when used in a suitable enclosure. 

## Connections 

Integral 5-pin M12 male quick-disconnect connector, 150 mm (6 in) PVC-jacketed cable with a 5-pin M12 male quickdisconnect connector, or 2 m (6.5 ft) integral PVC-jacketed cable, depending on model 

Models with a quick-disconnect connector require a mating cordset 

## Pro Editor Configuration 

Connection to Pro Editor software enables control of: 

- Animation: On, Flash, Two Color Flash, 50/50, 50/50 Rotate, Chase, Intensity Sweep, Color Sweep, Sequence, Wave, Double Wave 

- Color: Green, Red, Yellow, Blue, White, Cyan, Magenta, Amber, Rose, Lime Green, Orange, Sky Blue, Violet, Spring Green 

- Intensity: Low, Medium, High 

- • Speed: Slow, Standard, Fast 

Pro Converter Cable required to interface between PC and indicator, see accessories 

## Default Indicator Characteristics 

**==> picture [222 x 280] intentionally omitted <==**

**----- Start of picture text -----**<br>
Dominant  Color Coordinates [(2)]<br>Wavelength  Lumen<br>Color (nm) or  Output<br>Color  x y (Typical at<br>Temperature  25 °C)<br>(CCT)<br>Green 522 0.154 0.7 7.7<br>Red 620 0.689 0.309 3.1<br>Yellow 576 0.467 0.463 7.8<br>Blue 466 0.14 0.054 1.7<br>White 5700K 0.328 0.337 9.6<br>Cyan 493 0.157 0.331 8.7<br>Magenta – 0.392 0.186 4.2<br>Amber 589 0.556 0.42 5.8<br>Rose – 0.525 0.237 3.5<br>Lime Green 562 0.383 0.523 10<br>Sky Blue 486 0.145 0.24 9.2<br>Orange 599 0.616 0.37 4.6<br>Violet – 0.224 0.099 3.4<br>Spring  508 0.155 0.524 8<br>Green<br>**----- End of picture text -----**<br>


## Mounting 

M22 by 1.5 threaded base, maximum torque 2.25 N·m (20 inch·ibf) 

Mounting nut included 

Construction 

Base, Dome, and Nut: Polycarbonate 

(2) Refer to the CIE 1931 (x,y) Chromaticity Diagram to show equivalent color with indicated color coordinates. Actual coordinates may differ ± 10%. 

page 2 of 6 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

29-Sep-25 

K30 Pro Indicator 

## Required Overcurrent Protection 

|Required Overcurrent Protection<br>WARNING:Electrical connections must<br>be made by qualified personnel in<br>accordance with local and national<br>electrical codes and regulations.|Supply<br>Wiring<br>(AWG)<br>Required Overcurrent<br>Protection (A)<br>Supply<br>Wiring<br>(AWG)<br>Required Overcurrent<br>Protection (A)<br>20<br>5.0<br>26<br>1.0<br>22<br>3.0<br>28<br>0.8<br>24<br>2.0<br>30<br>0.5|
|---|---|



Overcurrent protection is required to be provided by end product application per the supplied table. 

Certifications 

Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. Supply wiring leads < 24 AWG shall not be spliced. For additional product support, go to www.bannerengineering.com. 

**==> picture [101 x 64] intentionally omitted <==**

**----- Start of picture text -----**<br>
Banner Engineering BV<br>Park Lane, Culliganlaan 2F bus 3<br>1831 Diegem, BELGIUM<br>Turck Banner LTD Blenheim House<br>Blenheim Court<br>Wickford, Essex SS11 8YT<br>GREAT BRITAIN<br>**----- End of picture text -----**<br>


## FCC Part 15 Class B for Unintentional Radiators 

(Part 15.105(b)) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 

- Reorient or relocate the receiving antenna. 

- Increase the separation between the equipment and receiver. 

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

- • Consult the dealer or an experienced radio/TV technician for help. 

(Part 15.21) Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. 

## Industry Canada ICES-003(B) 

This device complies with CAN ICES-3 (B)/NMB-3(B). Operation is subject to the following two conditions: 1) This device may not cause harmful interference; and 2) This device must accept any interference received, including interference that may cause undesired operation. 

Cet appareil est conforme à la norme NMB-3(B). Le fonctionnement est soumis aux deux conditions suivantes : (1) ce dispositif ne peut pas occasionner d'interférences, et (2) il doit tolérer toute interférence, y compris celles susceptibles de provoquer un fonctionnement non souhaité du dispositif. 

## Dimensions 

All measurements are listed in millimeters [inches], unless noted otherwise. The measurements provided are subject to change. 

**==> picture [473 x 151] intentionally omitted <==**

**----- Start of picture text -----**<br>
Quick Disconnect Models Cabled Models Terminal Models<br>. 30.0 mm (1.18")<br>27<br>[1.06] 42<br>58.0 mm (2.28") a [1.65] 44.5[1.75] [1.65]42 52.4<br>___ (_ ( [2.06]<br>31.0 mm  TG |<br>(1.22") M22 X 1.5 -6g<br>M22 X 1.5<br>16.0 mm (0.63") M22 X 1.5 -6g<br>M12 X 1<br>**----- End of picture text -----**<br>


29-Sep-25 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

page 3 of 6 

K30 Pro Indicator 

## Accessories 

## Pro Editor Hardware 

## MQDC-506-USB 

- Pro Converter Cable 

- • 1.83 m (6 ft) length 5-pin M12 quick disconnect to Device and USB to PC • Required for connection to the configuration software 

**==> picture [91 x 38] intentionally omitted <==**

## CSB-M1251FM1251M 

- 5-pin parallel Y splitter (Male-Male-Female) 

- • For full Pro Editor preview capability • Requires external power supply, sold separately 

## PSW-24-1 

- 24 V DC, 1 A power supply 

- • 2 m (6.5 ft) PVC cable with M12 quick disconnect • Provides external power with splitter cable, sold separately 

## ACC-PRO-CABLE5 

- Mating accessory for cabled and terminal models 

- 150 mm (6 inch) PVC cable with M12 quick disconnect 

- • Lever wire nuts included (qty 5) 

- Required to connect cabled models and screw terminal models to Pro Converter Cable, sold separately x5 

## Cordsets 

**==> picture [500 x 237] intentionally omitted <==**

**----- Start of picture text -----**<br>
5-Pin Single-Ended M12 Female Cordsets<br>Model  Length  Style  Dimensions  Pinout (Female)<br>MQDC1-501.5 0.5 m (1.5 ft)<br>MQDC1-503 0.9 m (2.9 ft)  44 Typ.<br>MQDC1-506 2 m (6.5 ft)<br>MQDC1-515 5 m (16.4 ft)  Straight<br>MQDC1-530 9 m (29.5 ft)  M12 x 1 2<br>ø 14.5 1<br>MQDC1-560 18 m (59 ft)<br>3<br>MQDC1-5100 31 m (101.7 ft)  4 5<br>MQDC1-506RA 2 m (6.5 ft)  1 = Brown<br>32 Typ. 2 = White<br>MQDC1-515RA 5 m (16.4 ft)  [1.26"] 3 = Blue 4 = Black<br>MQDC1-530RA 9 m (29.5 ft)  5 = Gray<br>30 Typ.<br>Right-Angle  [1.18"]<br>MQDC1-560RA 19 m (62.3 ft)<br>M12 x 1<br>ø 14.5 [0.57"]<br>**----- End of picture text -----**<br>


page 4 of 6 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

29-Sep-25 

K30 Pro Indicator 

**==> picture [480 x 108] intentionally omitted <==**

**----- Start of picture text -----**<br>
5-Pin Single-Ended M12 Female Washdown, Shielded Cordsets<br>Model  Length  Style  Dimensions  Pinout (Female)<br>MQDCWD-506 2 m (6.56 ft)  2<br>42 Typ. 1<br>[1.65"]<br>= 3<br>ø 15.0 4 5<br>Straight  [0.57"]<br>MQDCWD-530 9 m (29.5 ft)  os 1 = Brown<br>M12 x 1 2 = White<br>3 = Blue<br>4 = Black<br>5 = Gray<br>**----- End of picture text -----**<br>


## Splitter Cables for Use with IO-Blocks 

**==> picture [480 x 433] intentionally omitted <==**

**----- Start of picture text -----**<br>
5-Pin M12 to 4-Pin M12 Combiner Cordset with Flat Junction<br>Model  Branches (Male)  Trunk (Female)  Pinout<br>CSF-M12F51M12M41 4-pin Quick Disconnect, 2 × 0.31 m  5-pin Quick Disconnect, 0.31 m   Female<br>(1.02 ft)  (1.02 ft)  2<br>1<br>3<br>4 5<br>Male<br>ø4.5 18.0 49.0 Typ.<br>44.0 Typ. 1<br>ø14.5 2<br>oe fae<br>ø14.5 4<br>M12 x 1<br>__OLO M12 x 1  eal > 3 e9<br>35.0 43.0 -_<br>1 = brown (trunk); no connection (branches 1 and 2)<br>2 = white (trunk); brown (branch 1); gray (branch 2)<br>3 = blue (trunk; branches 1 and 2)<br>4 = black (trunk); black (branch 1); white (branch 2)<br>5 = gray (trunk only)<br>Brackets<br>32<br>SMB22A<br>• Right-angle bracket with curved slot for versatile orientation  C<br>• 12-ga. stainless steel  41<br>• Mounting hole for 22 mm sensor  B<br>A<br>Hole center spacing:  A to B = 26.0<br>Hole size:  A = ø 4.6, B = 4.6 x 16.9, C = 22.2 (eq 46<br>Ss<br>SMB22FVK 46 118<br>•• V-clamp, flat bracket and fasteners for mounting to pipe or extensions Clamp accommodates 28 mm diameter tubing or 1 in. square extrusions  ø22.5<br>• 22 mm hole for mounting sensor  A<br>34<br>Hole size:  A = ø 22.5<br>**----- End of picture text -----**<br>


## Brackets 

29-Sep-25 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

page 5 of 6 

K30 Pro Indicator 

**==> picture [500 x 283] intentionally omitted <==**

**----- Start of picture text -----**<br>
A<br>SMB22RAVK<br>• V-clamp, right-angle bracket and fasteners for mounting to pipe or extensions  46<br>• Clamp accommodates 28 mm diameter tubing or 1 in. square extrusions<br>• 22 mm hole for mounting sensor<br>57 90<br>Hole size:  A = ø 22.5<br>45<br>SMBAMS22P<br>C<br>• Flat SMBAMS series bracket with 22 mm hole for mounting sensors<br>• Articulation slots for 90+° rotation<br>• 12-ga. (2.6 mm) cold-rolled steel  93 A<br>B<br>Hole center spacing:  A = 26.0, A to B = 13.0<br>Hole size:  A = 26.8 x 7.0, B = ø 6.5, C = ø 22.5<br>45<br>SMBAMS22RA<br>• Right-angle SMBAMS series bracket with 22 mm hole for mounting sensors  C<br>• Articulation slots for 90+° rotation  53<br>• 12-ga. (2.6 mm) cold-rolled steel  A<br>B<br>Hole center spacing:  A = 26.0, A to B = 13.0<br>Hole size:  A = 26.8 x 7.0, B = ø 6.5, C = ø 22.5<br>48<br>**----- End of picture text -----**<br>


- 45 

- LMB22LPC Ø22 • For 28 mm tubular racking 65 • Toolless mount to racking • 22 mm mounting hole 43 Ø27.8 

## Banner Engineering Corp Limited Warranty 

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. 

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. 

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. 

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. 

For patent information, see www.bannerengineering.com/patents. 

page 6 of 6 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

29-Sep-25