K100PLNZRGB7Q

K100 Pro Hazardous Indicator Beacon (AC) 

## Features 

Multicolor Indicator with Optional Audible Alarm for Indoor or Outdoor Use 

- Industrial beacon provides bright indication for OEMs and users that need visible status information 

- • Ex/HazLoc approvals for potentially explosive environment applications • Rugged construction provides years of uninterrupted operation • Unique water-shed beacon design helps protect the indicator • Fourteen colors in one device • 36 mm threaded polycarbonate base • Rugged IP69K per ISO 20653, UL Type 4X housing • Variety of connector options • Rugged UV-stabilized polycarbonate base and window • 100 V AC to 240 V AC operating voltage • IK08 impact rating for maximum protection demanding applications 

## Models 

Standard models are shown. Contact the factory for other options. 

**==> picture [472 x 67] intentionally omitted <==**

**----- Start of picture text -----**<br>
Family Style Type Classification Voltage Colors Audible Connector *<br>K100 P L N Z RGB7 A Q<br>P = Pro N = Haz Area (Class I Div 2) Z = AC Blank = None Blank = 2 m integral ITC-ER PVC cable<br>a L = Indicator RGB7 = RGB Multicolor A = Audible Q = 5-pin integral 1/2 in. 20 UNF male<br>       quick disconnect **<br>**----- End of picture text -----**<br>


- Models with a quick disconnect require a mating cordset 

** Must be enclosed with a protected conduit or a suitable enclosure 

## Installation Instructions 

## Ex/HazLoc Applications 

## WARNING: 

- Explosive Atmospheres/Hazardous Locations 

- It is the user's responsibility to ensure that all local, state, and national laws, rules, codes, or regulations relating to the installation and use of this device in any particular application are satisfied. This device must be installed by a Qualified Person[(1)] , in accordance with this document and applicable regulations. 

## WARNING: 

- Explosion Hazard 

- Do not disconnect equipment unless the power has been switched off or the area is known to be nonhazardous. 

## WARNING: 

- Electrostatic Discharge (ESD) Specific Conditions for Safe Use 

- Parts of the enclosure are non-conducting and can generate an ignition-capable level of ESD. 

- • To reduce the risk of ignition due to electrostatic discharge, avoid contact with the equipment while an explosive atmosphere is present. 

- Clean the equipment with only a damp cloth. 

(1) A Qualified Person is a person who, by possession of a recognized degree or certificate of professional training, or who, by extensive knowledge, training and experience, has successfully demonstrated the ability to solve problems relating to the subject matter and work. 

Original Instructions 02-Sep-25 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

p/n: 231074 Rev. B 

K100 Pro Hazardous Indicator Beacon (AC) 

## Specific Conditions for Use and General Notes 

- See Specifications and Wiring Diagrams for important information concerning entity parameters, permissible locations, electrical connections and certifications. 

- In addition to the warning above concerning user responsibility, the installation must comply with the following: 

   - All installations must comply with all manufacturer's instructions. 

   - All applicable wiring methods in accordance with the relevant local regulations and the authority having jurisdiction. 

   - U.S. Installations: The relevant requirements of the National Electric Code® (ANSI/NFPA-70 NEC®). 

   - Canadian Installations: The relevant requirements of the Canadian Electrical Code (CSA C22.1). 

   - ◦ ATEX / IECEx Installations: The relevant requirements of EN IEC 60079-14 and applicable National regulations. 

- Do not attempt any repairs to this device; it contains no field-replaceable parts or components. Tampering and/or replacement with non-factory components may adversely affect the safe use of the system. 

- The nonconducting materials of this device may be susceptible to ignition-capable level of electrostatic charging and precautions must be taken to avoid this. The user/installer shall ensure that the equipment is not installed in a location where it may be subjected to external conditions (such as high-pressure steam) which are conducive to creating a build-up of electrostatic charges. 

- • Clean with a damp cloth only. 

- If the equipment is likely to come into contact with aggressive substances[(2)] , then it is the responsibility of the user to take suitable precautions[(3)] that prevent it from being adversely affected, thus ensuring that the type of protection is not compromised. 

- • The ingress protection (IP rating) of enclosures/panels may be invalidated by the installation of the beacon. The installation of the beacon in a particular enclosure/panel is subject to the evaluation/acceptance of the authority having jurisdiction. 

- Models with integral quick-disconnect (QD) connectors: Use recommended Banner cordsets (see "Cordsets" on page 5), or suitable quick-disconnect cordsets with threaded retaining nut (see"Specifications" on page 3). The cordset must be securely fastened using the quick-disconnect retaining nut to prevent disconnection. Maximum connector torque: 6 ft-lbs. 

   - Must be installed such that the connector is protected from impact and unauthorized disconnection. The method of protection can include conduit (e.g. pole, pendent), enclosed raceway, a listed enclosure suitable for the intended use, and/ or by inaccessible location that excludes possible impact damage. 

- ATEX / IECEx Installations; additional specific conditions of use 

   - The Beacon shall only be installed in areas with low risk of mechanical impact. 

   - Transient protection shall be provided at a level not exceeding 140% of the peak rated voltage at the supply terminals of the Beacon. 

   - For Zone 2: When the equipment is mounted to an external enclosure, the external enclosure shall be rated ATEX/IECEx Zone 2 IP54 minimum, in accordance with IEC/EN 60079-0. To maintain the IP64 rating for the overall assembly of beacon and external enclosure, the external enclosure and any fittings used must be rated IP64 minimum. 

   - For Zone 22: When the equipment is mounted to an external enclosure, the external enclosure shall be rated ATEX/IECEx Zone 22 IP64 minimum, in accordance with IEC/EN 60079-0 and IEC/EN 60079-31. 

- U.S. / Canadian Zone Installations; additional specific conditions of use ◦ Only non-audible K100 Pro Beacon models with 2 m integral cable. ◦ The Beacon shall only be installed in areas with low risk of mechanical impact. 

   - Transient protection shall be provided at a level not exceeding 140% of the peak rated voltage at the supply terminals of the Beacon. 

   - The beacons must be mounted to a conduit/standoff pipe or on an external enclosure. The K100 beacons must be installed on the conduit/standoff pipe or external enclosure in a way that ensures all field wiring is fully contained within the conduit/ standoff pipe or external enclosure. 

      - For Zone 2: When the beacon is mounted to an external enclosure, the external enclosure shall be rated Zone 2 IP54 minimum, in accordance with UL/CSA 60079-0. To maintain the IP64 rating for the overall assembly of beacon and external enclosure, the external enclosure and any fittings used must be rated IP64 minimum. 

      - For Zone 22: When the beacon is mounted to an external enclosure, the external enclosure shall be rated Zone 22 IP64 minimum, in accordance with UL/CSA 60079-0 and UL/CSA 60079-31. 

## Wiring 

**==> picture [500 x 130] intentionally omitted <==**

**----- Start of picture text -----**<br>
Diagram Key<br>wh (3)<br>Neutral<br>100-240 V AC<br>bn (1)<br>1 Hot<br>1 = Brown<br>bu (2) 2 = Blue<br>2 3 = White<br>4 = Black<br>bk (4) 5 = Gray<br>3<br>gy (5)<br>A<br>**----- End of picture text -----**<br>


An "X" denotes an active input. 

> (2) Aggressive substances—for example, acidic liquids or gases that may attack metals, or solvents that may affect polymeric materials. 

(3) Suitable precaution—for example, regular checks as part of routine inspections or establishing from the materials data sheet that is resistant to specific chemicals. 

page 2 of 6 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

02-Sep-25 

K100 Pro Hazardous Indicator Beacon (AC) 

For example: When the black wire and the white wire are both active, the indicator will be Magenta Steady. 

## Default Configuration 

**==> picture [500 x 242] intentionally omitted <==**

**----- Start of picture text -----**<br>
Wiring Operating Mode/Function<br>Brown Blue Black Gray Non-Audible Audible<br>X Red Steady Red Steady<br>X Green Steady Green Steady<br>X Blue Steady Blue Steady<br>X X Yellow Steady Yellow Steady<br>X X Magenta Steady Magenta Steady<br>X X Cyan Steady Cyan Steady<br>X X X White Steady White Steady<br>X Off Audible Steady, Frequency 2.5 KHz, Volume High<br>X X Red Steady Red Steady, Audible Steady, Frequency 2.5 KHz, Volume High<br>X X Green Steady Green Steady, Audible Steady, Frequency 2.5 KHz, Volume High<br>X X Blue Steady Blue Steady, Audible Steady, Frequency 2.5 KHz, Volume High<br>X X X Yellow Steady Yellow Steady, Audible Steady, Frequency 2.5 KHz, Volume High<br>X X X Magenta Steady Magenta Steady, Audible Steady, Frequency 2.5 KHz, Volume High<br>X X X Cyan Steady Cyan Steady, Audible Steady, Frequency 2.5 KHz, Volume High<br>X X X X White Steady White Steady, Audible Steady, Frequency 2.5 KHz, Volume High<br>**----- End of picture text -----**<br>


## Specifications 

Supply Protection Circuitry Protected against reverse polarity and transient voltages Leakage Current Immunity 400 µA 

Application Note: The use of relay output PLC is recommended since there is no leakage current. Solid state output PLCs often have leakage current above 1 mA and, therefore, turn the light on in the off state. To counteract the leakage current, a shunt resistor must be used. A resistor must be applied from the neutral wire of the device to the hot wire of each channel of the device. 

Indicator Response Time On Response: 350 ms (maximum) Off Response: 20 ms (maximum) 

Connections Integral 5-pin 1/2 in. 20UNF male quick-disconnect connector or 2 m (6.5 ft) integral ITC-ER PVC-jacketed cable, depending on model 

Models with a quick disconnect require a mating cordset Connecting 5-pin M12 quick-disconnect cordsets (see "Cordsets" on page 5): Female single-ended Multiconductor cable (at minimum): UL Style 2517, 24 AWG wire, rated ≥ 80 °C; M12 quick-disconnect connector: per IEC 61076-2-101, must have threaded M12 x 1 retaining nut 

Construction Base, Dome, and Nut: Polycarbonate LED Lifetime 

Lumen maintenance L70 

When operating within specifications, output decreases less than 30% after 42,000 hours Mounting M36 by 2.0 threaded base, maximum torque 5.0 N·m (44 inch-lbf) Interior 3/4-14 NPT Thread Mounting nut included 

Adjacent Unit Mounting Separation Distance Minimum: 0 in (mounted with unit flanges touching) Approvals 

NEC and CEC (cULus) • Gas and Vapors: Class I Div 2 Groups ABCD T4 • Dust and Fibers/flyings: Class II Div 2 Groups FG T6; Class III Div 1 and Div 2 T6 Maximum Input Power Light Only: 7.0 W Light and Audible: 9.7 W 

## Audible Characteristics 

Sound Intensity at 2.5 KHz, at 1 m (typical): Low volume setting: 93 dB Medium volume setting: 96 dB High volume setting: 101 dB 

Operating Conditions –40 °C to +60 °C (–40 °F to +140 °F) 90% at +50 °C maximum relative humidity (non-condensing) Storage Temperature: –40 °C to +70 °C (–40 °F to +158 °F) 

## Vibration and Mechanical Shock 

Meets IEC 60068-2-6 requirements (Vibration: 10 Hz to 55 Hz, 1.0 mm amplitude, 5 minutes sweep, 30 minutes dwell) Meets IEC 60068-2-27 requirements (Shock: 30G 11 ms duration, half sine wave) Impact: IK08 (IEC 60068-2-75) Environmental Rating IP66, IP69K per ISO 20653, UL Type 4X Certifications E530817 

02-Sep-25 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

page 3 of 6 

K100 Pro Hazardous Indicator Beacon (AC) 

## Supply Voltage and Current 

100 V AC to 240 V AC, 50 Hz to 60 Hz Maximum current (mA AC at 60 HZ): 

**==> picture [202 x 36] intentionally omitted <==**

**----- Start of picture text -----**<br>
Voltage Light Only Light & Audible<br>100 102 112<br>230 68 70<br>**----- End of picture text -----**<br>


Internal temperature compensation circuitry: Reduces the Lumen Output to decrease the unit's internal operating temperature. The amount of reduction is dependent on the ambient operating temperature, supply voltage, color, and/or audible functions being utilized. 

## Indicator Characteristics 

**==> picture [474 x 258] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||||||||
|---|---|---|---|---|---|---|---|---|
|Color|
|Dominant Wavelength|Lumen Output|ambient operating temperature, supply voltage, color, and/or|
|Color|(nm) or Color|Coordinates|[(4)]|(Typical at 25|audible functions being utilized.|
|Temperature (CCT)|x|y|°C)|Required Overcurrent Protection|
|Red|620 nm|0.6900|0.3081|36|
|WARNING:|Electrical connections must|
|Green|525 nm|0.1620|0.7112|73|
|be made by qualified personnel in|
|Blue|468 nm|0.1400|0.0539|14|accordance with local and national|
|electrical codes and regulations.|
|Yellow|575 nm|0.4780|0.4700|91|
|Magenta|-|0.3877|0.1817|47|Overcurrent protection is required to be provided by end|
|product application per the supplied table.|
|Cyan|492 nm|0.1666|0.3406|83|
|Overcurrent protection may be provided with external fusing|
|White|6000K|0.3379|0.3380|112|or via Current Limiting, Class 2 Power Supply.|
|Supply wiring leads < 24 AWG shall not be spliced.|
|Amber|590 nm|0.5566|0.4098|63|
|For additional product support, go|
|Rose|-|0.5234|0.2310|39|to www.bannerengineering.com.|
|Lime Green|562 nm|0.3987|0.5306|99|Supply Wiring|Required Overcurrent|Supply Wiring|Required Overcurrent|
|Protection (A)|Protection (A)|
|(AWG)|(AWG)|
|Orange|600 nm|0.6135|0.3665|50|
|20|5.0|26|1.0|
|Sky Blue|485 nm|0.1483|0.2476|87|
|22|3.0|28|0.8|
|Violet|-|0.2148|0.0938|28|
|24|2.0|30|0.5|
|Spring|507 nm|0.1780|0.5375|77|
|Green|

**----- End of picture text -----**<br>


(4) Refer to CIE 1931 chromaticity diagram or color chart, to show equivalent color with indicated color coordinates. 

page 4 of 6 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

02-Sep-25 

K100 Pro Hazardous Indicator Beacon (AC) 

## Dimensions 

All measurements are listed in millimeters [inches], unless noted otherwise. The measurements provided are subject to change. 

**==> picture [500 x 475] intentionally omitted <==**

**----- Start of picture text -----**<br>
Standard Models Audible Models<br>Ø 92.8 Ø 92.8<br>[3.65] [3.65]<br>80.9 81.0<br>[3.18] [3.19]<br>134.7 134.8<br>[5.3] [5.31]<br>25.5<br>25.5 M36 x 2.0 [1.01]<br>M36 x 2.0 [1.01]<br>Interior<br>Interior 3/4 - 14 NPT<br>3/4 - 14 NPT<br>13.0 1/2 - 20 13.0<br>1/2 - 20 [0.51] [0.51]<br>Ø 118.5<br>Ø 118.5 [4.67]<br>[4.67]<br>Accessories<br>Cordsets<br>All measurements are listed in millimeters, unless noted otherwise. The measurements provided are subject to change.<br>5-Pin Single-Ended 1/2-in Dual Key Female Cordsets<br>Model  Length  Style  Dimensions  Pinout (Female)<br>MQAC2-506 2 m (6.56 ft)  42 Typ. 3 4<br>MQAC2-515 5 m (16.4 ft)<br>2<br>Straight  1 5<br>1/2-20 UNF-2B 1 = Brown<br>MQAC2-530 9.14 m (30 ft)  2 = Blue<br>ø 14.5 3 = White<br>4 = Black<br>5 = Gray<br>**----- End of picture text -----**<br>


## Brackets 

**==> picture [500 x 86] intentionally omitted <==**

**----- Start of picture text -----**<br>
65 70<br>50.8<br>LMB36RA • Indicator light right-angle mounting  4 X Ø6.5 25.4<br>• 36 mm mounting hole  Ø36.5<br>• Stainless steel  62.5<br>**----- End of picture text -----**<br>


02-Sep-25 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

page 5 of 6 

K100 Pro Hazardous Indicator Beacon (AC) 

## Elevated Mount System 

## Elevated Mount System (1/2" Pipes) 

**==> picture [500 x 209] intentionally omitted <==**

**----- Start of picture text -----**<br>
Adapter/Cover Model Description<br>• Adapter from M36 thread to ½-14 NPSM thread<br>SA-M36E12 •• Streamlined black plastic mounting base adapter/coverDrilled hole<br>Black Anodized Aluminum, ½ in. NPT Pipe  Clear Anodized Aluminum, ½ in. NPT Pipe<br>Models Models Description<br>Pipe<br>SOP-E12-150A , 150 mm (6 in) long SOP-E12-150AC , 150 mm (6 in) long<br>• Elevated-use stand-off pipe<br>SOP-E12-300A , 300 mm (12 in) long SOP-E12-300AC , 300 mm (12 in) long • Threaded at both ends<br>• Compatible with most industrial<br>SOP-E12-600A , 600 mm (24 in) long - environments<br>SOP-E12-900A , 900 mm (36 in) long SOP-E12-900AC , 900 mm (36 in) long<br>Mounting Base Model Description<br>• Elevated-use stand-off pipes (½ in, NPSM/DN15)<br>SA-F12 •• M5 mounting hardware and nitrile gasket includedDie-cast zinc base with black paint<br>**----- End of picture text -----**<br>


## Elevated Mount System (3/4" Pipes) 

**==> picture [500 x 154] intentionally omitted <==**

**----- Start of picture text -----**<br>
Adapter/Cover Model Description<br>Adapter/<br>Cover • M36 thread adapter with clearance for ¾ pipe mount<br>SA-M36SOP •• Streamlined black plastic mounting base adapter/coverDrilled hole<br>Black Anodized Aluminum, ¾ in. NPT Pipe Models Description<br>Pipe<br>SOP-E34-150A , 150 mm (6 in) long<br>SOP-E34-300A , 300 mm (12 in) long •• Elevated-use stand-off pipeThreaded at both ends<br>SOP-E34-600A , 600 mm (24 in) long • Compatible with most industrial environments<br>SOP-E34-900A , 900 mm (36 in) long<br>**----- End of picture text -----**<br>


## Banner Engineering Corp Limited Warranty 

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. 

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. 

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. 

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. 

For patent information, see www.bannerengineering.com/patents. 

page 6 of 6 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

02-Sep-25