K100PLNZRGB7.

K100 Pro Hazardous Indicator Beacon - AC Datasheet 

## Features 

Multicolor Indicator with Optional Audible Alarm for Indoor or Outdoor Use 

**==> picture [59 x 85] intentionally omitted <==**

- Industrial beacon providing bright indication for OEMs and users that need visible status infor­ mation 

- • Ex/HazLoc approvals for potentially explosive environment applications • Rugged construction provides years of uninterrupted operation • Unique water­shed beacon design helps protect the indicator • Fourteen colors in one device • 36 mm threaded polycarbonate base • Rugged IP69K per DIN 40050-9, UL Type 4X housing • Variety of connector options • Rugged UV­stabilized polycarbonate base and window • 100 V AC to 240 V AC operating voltage • IK08 impact rating for maximum protection demanding applications 

## Models 

Standard models shown. Contact factory for other options. 

**==> picture [477 x 84] intentionally omitted <==**

**----- Start of picture text -----**<br>
Family Style Classification Colors Audible Connector *<br>K100 P L N Z RGB7 A Q<br>Blank = None Blank = 2 m integral ITC-ER PVC cable<br>RGB7 = RGB Multicolor Q = 5-pin integral 1/2 in. 20 UNF male<br>       quick disconnect **<br>* Models with a quick disconnect require a mating cordset<br>** Must be enclosed with a protected conduit or a suitable enclosure<br>**----- End of picture text -----**<br>


## Installation Instructions 

## Ex/HazLoc Applications 

**==> picture [32 x 193] intentionally omitted <==**

- WARNING: • Explosive Atmospheres/Hazardous Locations • It is the user's responsibility to ensure that all local, state, and national laws, rules, codes, or regulations relat­ ing to the installation and use of this device in any particular application are satisfied. This device must be in­ stalled by a Qualified Person[(1)] , in accordance with this document and applicable regulations. 

## WARNING: 

- Explosion Hazard 

- • Do not disconnect equipment unless the power has been switched off or the area is known to be non­haz­ ardous. 

## CAUTION: 

- Electrostatic Discharge (ESD) Special Conditions for Safe Use 

- • Parts of the enclosure are non­conducting and can generate an ignition­capable level of ESD. • Clean the equipment with only a damp cloth. 

## General Notes and Conditions for Use 

   - See Specifications and Wiring Diagrams for important information concerning entity parameters, permissible locations, electrical connections and certifications. 

   - In addition to the warning above concerning user responsibility, the installation must comply with the following: 

- (1) A Qualified Person is a person who, by possession of a recognized degree or certificate of professional training, or who, by extensive knowledge, training and experience, has successfully demonstrated the ability to solve problems relating to the subject matter and work. 

Original Instructions June 12, 2023 

© Banner Engineering Corp. 

p/n: 231074 Rev. B 

231074 

K100 Pro Hazardous Indicator Beacon - AC Datasheet 

   - All installations must comply with all manufacturer's instructions. 

   - All applicable wiring methods in accordance with the relevant local regulations and the authority having jurisdiction. 

   - U.S. Installations: The relevant requirements of the National Electric Code® (ANSI/NFPA­70 NEC®). 

   - ◦ Canadian Installations: The relevant requirements of the Canadian Electrical Code (CSA C22.1). 

- Do not attempt any repairs to this device; it contains no field-replaceable parts or components. Tampering and/or replacement with non-factory components may adversely affect the safe use of the system. 

- The nonconducting materials of this device may be susceptible to ignition-capable level of electrostatic charging and precautions must be taken to avoid this. The user/installer shall ensure that the equipment is not installed in a location where it may be subjected to external conditions (such as high-pressure steam) which are conducive to creating a build-up of electrostatic charges. 

- Clean with a damp cloth only. 

- If the equipment is likely to come into contact with aggressive substances[(1)] , then it is the responsibility of the user to take suitable precautions[(2)] that prevent it from being adversely affected, thus ensuring that the type of protection is not compromised. 

- The ingress protection (IP rating) of enclosures/panels may be invalidated by the installation of the beacon. The installation of the beacon in a particular enclosure/panel is subject to the evaluation/acceptance of the authority having jurisdiction. 

- Models with integral quick-disconnect (QD) connectors: 

   - Use recommended Banner cordsets (see "Cordsets" on page 4), or suitable quick­disconnect cordsets with threaded retain­ ing nut (see "Specifications" on page 3). The cordset must be securely fastened using the quick­disconnect retaining nut to prevent disconnection. Maximum connector torque: 6 ft-lbs. 

   - Must be installed such that the connector is protected from impact and unauthorized disconnection. The method of protec­ tion can include conduit (e.g. pole, pendent), enclosed raceway, a listed enclosure suitable for the intended use, and/or by inaccessible location that excludes possible impact damage. 

## Wiring 

**==> picture [500 x 129] intentionally omitted <==**

**----- Start of picture text -----**<br>
Diagram Key<br>3<br>Neutral<br>1<br>1 Hot<br>1 = Brown<br>2 2 = Blue<br>2 3 = White<br>4 = Black<br>4 5 = Gray<br>3<br>5<br>A<br>**----- End of picture text -----**<br>


An "X" denotes an active input. 

For example: When the black wire and the white wire are both active, the indicator will be Magenta Steady. 

## Default Configuration 

**==> picture [500 x 220] intentionally omitted <==**

**----- Start of picture text -----**<br>
Wiring  Operating Mode/Function<br>Brown  Blue  Black  Gray  Non­Audible  Audible<br> X   Red Steady   Red Steady<br> X   Green Steady   Green Steady<br> X   Blue Steady   Blue Steady<br> X   X   Yellow Steady   Yellow Steady<br> X   X   Magenta Steady   Magenta Steady<br> X   X   Cyan Steady   Cyan Steady<br> X   X   X   White Steady   White Steady<br> X   Off   Audible Steady, Frequency 2.5 KHz, Volume High<br> X   X   Red Steady   Red Steady, Audible Steady, Frequency 2.5 KHz, Volume High<br> X   X   Green Steady   Green Steady, Audible Steady, Frequency 2.5 KHz, Volume High<br> X   X   Blue Steady   Blue Steady, Audible Steady, Frequency 2.5 KHz, Volume High<br> X   X   X   Yellow Steady   Yellow Steady, Audible Steady, Frequency 2.5 KHz, Volume High<br> X   X   X   Magenta Steady   Magenta Steady, Audible Steady, Frequency 2.5 KHz, Volume High<br>Continued on page 3<br>**----- End of picture text -----**<br>


(1) Aggressive substances—for example, acidic liquids or gases that may attack metals, or solvents that may affect polymeric materials. 

(2) Suitable precaution—for example, regular checks as part of routine inspections or establishing from the materials data sheet that is resistant to specific chemi­ cals. 

page 2 

June 12, 2023 

© Banner Engineering Corp. 

K100 Pro Hazardous Indicator Beacon - AC Datasheet 

**==> picture [500 x 65] intentionally omitted <==**

**----- Start of picture text -----**<br>
Continued from page 2<br>Wiring  Operating Mode/Function<br>Brown  Blue  Black  Gray  Non­Audible  Audible<br> X   X   X   Cyan Steady   Cyan Steady, Audible Steady, Frequency 2.5 KHz, Volume High<br> X   X   X   X   White Steady   White Steady, Audible Steady, Frequency 2.5 KHz, Volume High<br>**----- End of picture text -----**<br>


## Specifications 

## Supply Protection Circuitry 

Protected against reverse polarity and transient voltages 

## Leakage Current Immunity 

## 400 µA 

- Application Note: The use of relay output PLC is recommend­ ed since there is no leakage current. Solid state output PLCs often have leakage current above 1 mA and, therefore, turn the light on in the off state. To counteract the leakage current, a shunt resistor must be used. A resistor must be applied from the neutral wire of the device to the hot wire of each channel of the device. 

## Indicator Response Time 

On Response: 350 ms (maximum) 

Off Response: 20 ms (maximum) 

## Connections 

Integral 5­pin 1/2 in. 20UNF male quick­disconnect connec­ tor or 2 m (6.5 ft) integral ITC­ER PVC­jacketed cable, de­ pending on model 

Models with a quick disconnect require a mating cordset 

Connecting 5­pin M12 quick­disconnect cordsets (see "Cord­ sets" on page 4): Female single-ended Multiconductor cable (at minimum): UL Style 2517, 24 AWG wire, rated ≥ 80 °C; M12 quick-disconnect connector: per IEC 61076-2-101, must have threaded M12 x 1 retaining nut 

## Construction 

Base, Dome, and Nut: Polycarbonate 

## LED Lifetime 

Lumen maintenance L70 

## Approvals 

NEC and CEC (cULus) 

- Gas and Vapors: Class I Div 2 Groups ABCD T4 

- • Dust and Fibers/flyings: Class II Div 2 Groups FG T6; Class III Div 1 and Div 2 T6 

## Maximum Input Power 

Light Only: 7.0 W 

Light and Audible: 9.7 W 

## Audible Characteristics 

Sound Intensity at 2.5 KHz, at 1 m (typical): Low volume setting: 93 dB Medium volume setting: 96 dB High volume setting: 101 dB 

## Operating Conditions 

–40 °C to +60 °C (–40 °F to +140 °F) 

90% at +50 °C maximum relative humidity (non-condensing) Storage Temperature: –40 °C to +70 °C (–40 °F to +158 °F) 

## Vibration and Mechanical Shock 

Meets IEC 60068-2-6 requirements (Vibration: 10 Hz to 55 Hz, 1.0 mm amplitude, 5 minutes sweep, 30 minutes dwell) Meets IEC 60068­2­27 requirements (Shock: 30G 11 ms dura­ tion, half sine wave) 

Impact: IK08 (IEC 60068-2-75) 

## Environmental Rating 

IP66, IP69K per DIN 40050-9, UL Type 4X 

## Certifications 

When operating within specifications, output decreases less than 30% after 42,000 hours 

## Mounting 

M36 by 2.0 threaded base, maximum torque 5.0 N·m (44 inch-lbf) 

Interior 3/4-14 NPT Thread 

Mounting nut included 

Adjacent Unit Mounting Separation Distance Minimum: 0 in (mounted with unit flanges touching) 

## Indicator Characteristics 

**==> picture [221 x 109] intentionally omitted <==**

**----- Start of picture text -----**<br>
Color Coordi­<br>Dominant Wavelength  Lumen Output<br>Color  (nm) or Color Tempera­ nates [(1)] (Typical at 25<br>ture (CCT)  x  y  °C)<br> Red   620 nm   0.6900   0.3081   36<br> Green   525 nm   0.1620   0.7112   73<br> Blue   468 nm   0.1400   0.0539   14<br> Yellow   575 nm   0.4780   0.4700   91<br>Continued on page 4<br>**----- End of picture text -----**<br>


(1) Refer to CIE 1931 chromaticity diagram or color chart, to show equivalent color with indicated color coordinates. 

E530817 

## Supply Voltage and Current 

100 V AC to 240 V AC, 50 Hz to 60 Hz 

Maximum current (mA AC at 60 HZ): 

**==> picture [222 x 203] intentionally omitted <==**

**----- Start of picture text -----**<br>
Voltage  Light Only  Light & Audible<br> 100   102   112<br> 230   68   70<br>Continued from page 2<br>Dominant Wavelength  Color Coordinates  Lumen Output<br>Color  (nm) or Color Tempera­ (Typical at 25<br>ture (CCT)  x  y  °C)<br> Magenta   ­   0.3877   0.1817   47<br> Cyan   492 nm   0.1666   0.3406   83<br> White   6000K   0.3379   0.3380   112<br> Amber   590 nm   0.5566   0.4098   63<br> Rose   ­   0.5234   0.2310   39<br> Lime<br> 562 nm   0.3987   0.5306   99<br>Green<br>Continued on page 4<br>**----- End of picture text -----**<br>


June 12, 2023 

page 3 

© Banner Engineering Corp. 

K100 Pro Hazardous Indicator Beacon - AC Datasheet 

**==> picture [221 x 109] intentionally omitted <==**

**----- Start of picture text -----**<br>
Continued from page 3<br>Dominant Wavelength  Color Coordinates  Lumen Output<br>Color  (nm) or Color Tempera­ (Typical at 25<br>ture (CCT)  x  y  °C)<br> Orange   600 nm   0.6135   0.3665   50<br> Sky Blue   485 nm   0.1483   0.2476   87<br> Violet   ­   0.2148   0.0938   28<br> Spring   507 nm   0.1780   0.5375   77<br>Green<br>**----- End of picture text -----**<br>


Internal temperature compensation circuitry: Reduces the Lu­ men Output to decrease the unit's internal operating tempera­ ture. The amount of reduction is dependent on the ambient operating temperature, supply voltage, color, and/or audible functions being utilized. 

## Required Overcurrent Protection 

**==> picture [32 x 42] intentionally omitted <==**

WARNING: Electrical connections must be made by qualified personnel in ac­ cordance with local and national electri­ cal codes and regulations. 

Overcurrent protection is required to be provided by end prod­ uct application per the supplied table. 

Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. 

Supply wiring leads < 24 AWG shall not be spliced. For additional product support, go to www.bannerengineering.com. 

**==> picture [222 x 79] intentionally omitted <==**

**----- Start of picture text -----**<br>
Supply  Supply<br>Required Overcurrent  Required Overcurrent<br>Wiring  Wiring<br>Protection (A) Protection (A)<br>(AWG) (AWG)<br>20 5.0 26 1.0<br>22 3.0 28 0.8<br>24 1.0 30 0.5<br>**----- End of picture text -----**<br>


## Dimensions 

All measurements are listed in millimeters [inches], unless noted otherwise. 

**==> picture [500 x 281] intentionally omitted <==**

**----- Start of picture text -----**<br>
Standard Models Audible Models<br>Ø 92.8 Ø 92.8<br>[3.65] [3.65]<br>80.9 81.0<br>[3.18] [3.19]<br>134.7 134.8<br>[5.3] [5.31]<br>25.5<br>25.5 M36 x 2.0 [1.01]<br>M36 x 2.0 [1.01]<br>Interior<br>Interior<br>T<br>13.0 1/2 - 20 13.0<br>1/2 - 20 [0.51] [0.51]<br>Ø 118.5 [4.67]<br>[4.67]<br>**----- End of picture text -----**<br>


Accessories 

## Cordsets 

All measurements are listed in millimeters, unless noted otherwise. 

June 12, 2023 

page 4 

© Banner Engineering Corp. 

K100 Pro Hazardous Indicator Beacon - AC Datasheet 

**==> picture [500 x 125] intentionally omitted <==**

**----- Start of picture text -----**<br>
5­Pin 1/2­in Dual Key Cordsets—Single Ended<br>Model  Length  Style  Dimensions  Pinout<br>MQAC2-506 2 m (6.56 ft)<br>MQAC2-515 5 m (16.4 ft)  3 4<br>2<br>Straight  1 5<br>MQAC2-530 9.14 m (30 ft)  1/2-20 UNF-2B 1 = Brown 2 = Blue<br>ø 14.5 3 = White<br>4 = Black<br>5 = Gray<br>**----- End of picture text -----**<br>


## Brackets 

**==> picture [500 x 86] intentionally omitted <==**

**----- Start of picture text -----**<br>
65 70<br>50.8<br>LMB36RA • Indicator light right­angle mounting  4 X Ø6.5 25.4<br>• 36 mm mounting hole  Ø36.5<br>• Stainless steel<br>62.5<br>**----- End of picture text -----**<br>


## Elevated Mount System 

**==> picture [500 x 331] intentionally omitted <==**

**----- Start of picture text -----**<br>
Model<br>Black Anodized Alu­ Black Anodized Aluminum  Clear Anodized Aluminum Features Components<br>minum<br>½ in. NPT ½ in. NPT<br>¾ in. NPT<br>SOP-E34-150A  150 mm  SOP-E12-150A  150 mm (6  SOP-E12-150AC  150 mm<br>(6 in) long  in) long  (6 in) long<br>• Elevated­use stand­off pipe<br>SOP-E34-300A  300 mm  SOP-E12-300A  300 mm  SOP-E12-300AC  300  • Black anodized aluminum or clear an­<br>(12 in) long   (12 in) long  mm (12 in) long   odized aluminum surface<br>• Threaded at both ends<br>SOP-E34-600A (24 in) long    600 mm  (24 in) long  SOP-E12-600A  600 mm   —  • Compatible with most industrial environ­ments<br>SOP-E34-900A  900 mm  SOP-E12-900A  900 mm  SOP-E12-900AC  900<br>(36 in) long   (36 in) long  mm (36 in) long<br>• Adapter from M36 thread to 12-14 NPSM<br>thread<br>SA-M36E12 • Streamlined black plastic mounting base<br>adapter/cover<br>• Drilled hole<br>• M36 thread adapter with clearance for ¾<br>pipe mount<br>SA-M36SOP • Streamlined black plastic mounting base<br>adapter/cover<br>• Drilled hole<br>Pipe Mounting Flange<br>Model  Features  Construction<br>• Elevated-use stand-off pipes (½ in, NPSM/ 4x ø5.5 54<br>DN15)  Die-cast zinc base with black<br>SA-F12 • M5 mounting hardware and nitrile gasket  paint  ø28<br>included  10 ø70<br>**----- End of picture text -----**<br>


## Banner Engineering Corp Limited Warranty 

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of ship­ ment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the 

June 12, 2023 

page 5 

© Banner Engineering Corp. 

K100 Pro Hazardous Indicator Beacon - AC Datasheet 

factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. 

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUD­ ING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. 

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BAN­ NER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. 

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or lia­ bilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installa­ tion of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the prod­ uct warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other lan­ guage. For the most recent version of any documentation, refer to: www.bannerengineering.com. 

For patent information, see www.bannerengineering.com/patents. 

page 6 

June 12, 2023 

© Banner Engineering Corp.