JUWT1105MCD

**ELECTRIC  DOUBLE  LAYER  CAPACITORS "EVerCAP  "** 

## **JUW** 

Radial Lead Type, High Capacitance 

**==> picture [289 x 66] intentionally omitted <==**

**----- Start of picture text -----**<br>
JUM<br>High Capacitance type (2.7V).<br>Higher<br>Higher capacitance than JUM. Capacitance<br>Wide temperature range (– 25 to  [+] 70°C).<br>Compliant to the RoHS directive (2011/65/EU). os<br>JUW<br>CL}<br>**----- End of picture text -----**<br>


**==> picture [494 x 197] intentionally omitted <==**

**----- Start of picture text -----**<br>
|_| Specifications<br>a Item Performance Characteristics<br>Category Temperature Range – 25 to +70°C<br>Rs<br>Rated Voltage 2.7V<br>Re<br>Rated Capacitance Range 1 to 82F   See Note<br>Re<br>Capacitance Tolerance ± 20% , 20°C<br>Re<br>Stability at Low Temperature Capacitance (– 25°C) / Capacitance (+20°C) ×100 70% ESR (– 25°C) / ESR (+20°C)  4<br>Re<br>a ESR,  DCR* Refer to the table below (20°C). *DC internal resistance<br>The specifications listed at right shall be met when the capacitors  Capacitance change Within ±30% of the initial capacitance value<br>Endurance are restored to 20°C after the rated voltage is applied for 1000 hours ESR 300% or less than the initial specified value<br>at 70°C.<br>The specifications listed at right shall be met when the capacitors  Capacitance change Within ±30% of the initial capacitance value<br>Shelf Life are restored to 20°C after storing the capacitors under no load ESR 300% or less than the initial specified value<br>for 1000 hours at 70°C.<br>The specifications listed at right shall be met when the capacitors  Capacitance change Within ±30% of the initial capacitance value<br>Humidity Endurance are restored to 20°C after the rated voltage is applied for 500 hours ESR 300% or less than the initial specified value<br>at 40°C 90%RH.<br>Marking Printed with white color letter on black sleeve.<br>**----- End of picture text -----**<br>


## Drawing 

**==> picture [220 x 150] intentionally omitted <==**

**----- Start of picture text -----**<br>
Sleeve (P.E.T.)  φd<br>= 6<br>Pressure<br>relief vent<br>L [+][   MAX.] 15 [MIN] 4 [MIN]<br>ie OLE<br>(mm)<br>φD 6.3 8 10 12.5 16 18 (φD < 10) 1.5<br>P 2.5 3.5 5.0 5.0 7.5 7.5   (φD    10) 2.0<br>| | f | | | {tf<br>φd 0.5 0.6 0.6 0.6 0.8 0.8<br>| | [| [| *| * JT |<br>     In case L>25 for the φ10 and φ12.5 dia unit, lead dia  φ d=0.8<br>0.5MAX 0.5<br>D+φ P±<br>**----- End of picture text -----**<br>


## Type numbering system (Example : 2.7V 1F) 

**==> picture [217 x 148] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 2 3 4 5 6 7 8 9 10 11<br>J U W T 1 1 0 5 M C D<br>Configuration<br>Capacitance tolerance (±20%)<br>Rated capacitance (1 F)<br>Rated voltage (2.7V)<br>Series name<br>Type<br> Configuration<br>φ D Pb-free lead finishingPb-free PET sleeve<br>6.3 CD<br>8 10 PD<br>12.5 to 18 HD<br>**----- End of picture text -----**<br>


- Please refer to page 20 about the end seal configuration. 

## Dimensions 

Rated ESR Rated Voltage( Code ) Capacitance(F) Code (at 1kHz)(Ω) Typical (DCR Ω) φ Case sizeD × L (mm) Pe of 1.0 tT 105 | ~~dt~~ 1.8 4 6.3 × 9 es 1.5 155 1.2 2.5 8 × 11.5 Re ~~ds~~ 2.7 275 0.6 1.2 8 × 20 es ~~es~~ 3.3 335 0.5 1.1 10 × 12.5 4.7 475 0.4 0.8 10 × 20 2.7V es 6.8 685 0.3 0.7 12.5 × 20 (T1) Re 12 126 0.3 0.6 10 × 31.5 es 22 226 0.2 0.4 12.5 × 31.5 es 33 336 0.12 0.28 16 × 31.5 es 47 476 0.1 0.22 18 × 31.5 es 82 826 0.06 0.13 18 × 40 Re ds The listed DCR value is typical and therefore not a guaranteed value. 

## Note : 

The capacitance calculated from discharge time (ΔT) with constant current ( i ) after 30minuite charge with rated voltage (2.7V). 

The discharge current ( i ) is 0.01 × rated capacitance (F). The discharge time (ΔT) measured between 2V and 1V with constant current. The capacitance calculated bellow. 

Capacitance (F) = i × ΔT 

CAT.8100F 

370