ISD400-7311

ISD400-7311 ISD400 

**OPTICAL DATA TRANSMISSION** 

**ISD400-7311 | ISD400** OPTICAL DATA TRANSMISSION 

## Ordering information 

|**Type**|**Part no.**|
|---|---|
|ISD400-7311|1071522|



Data transmission requires two devices. The second device must be ordered separately. Other models and accessories > www.sick.com/ISD400 

**==> picture [63 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
Illustration may differ<br>**----- End of picture text -----**<br>


**==> picture [69 x 24] intentionally omitted <==**

**----- Start of picture text -----**<br>
CEO:LISTED<br>**----- End of picture text -----**<br>


## Detailed technical data 

## Mechanics/electronics 

|**Supply voltage Vs**|DC 18 V ... 30 V|
|---|---|
|**Power consumption**|≤ 3.6 W1)|
|**Connection type**|1 x Ethernet female connector M12, 4-pin, D-coded<br>1 x power supply male connector M12, 4-pin, A-coded|
|**Frequency**|F1|
|**Enclosure rating**|IP65|
|**Protection class**|III|



1) Without load. 

## Performance 

|**Transmission range**|0.2 m ... 200 m|
|---|---|
|**Light source**|Laser, red (660 nm)|
||Laser, infrared (785 nm)|
|**Laser class**|1M (IEC 60825-1:2014, EN 60825-1:2014)|
|**Typ. light spot size (distance)**|1.75 m (at 100 m)|
|**Aperture angle**|1° (sender)|
||1.5° (receiver)|



## Interfaces 

|**Ethernet**<br>Data transmission rate|✔<br>100 Mbit/s|
|---|---|
|**Digital input**|Vs: sender deactivated|
|**Digital output**<br>Number<br>Type<br>Function|11)<br>Push-pull: PNP/NPN<br>Output active for LOW and HIGH level<br>Warning messages as the laser ages, if the permissible limits of the interior device tempera-<br>ture are exceeded or undercut, if the optical path is interrupted, if no Ethernet cable is con-<br>nected, if the receiving level is undercut, if the laser is not ready for operation, if the heating is<br>switched on.|



1) HIGH: Uv – 3 V, LOW: < 2 V. 

**Product data sheet | 2024-04-23 12:44:46 Subject to change without notice** 

**2 INTEGRATION PRODUCTS | SICK** 

**ISD400-7311 | ISD400** OPTICAL DATA TRANSMISSION 

## Ambient data 

|**Electromagnetic compatibility (EMC)**|EN 61000-6-21)<br>EN 61000-6-4|
|---|---|
|**Ambient temperature, operation**|–20 °C ... +55 °C|
|**Ambient temperature, storage**|–40 °C ... +75 °C|
|**Max. rel. humidity (not condensing)**|90 %, Non-condensing|



1) This is a Class A device. This device can cause radio interference in living quarters. 

## General notes 

|**Note**|Setting up a data transmission path requires a pair of devices, where one device has frequen-<br>cy F1 (ISD400-7xx1) and the other device has frequency F2 (ISD400-7xx2). A wide variety of<br>Ethernet protocols can be used in protocol-free transmission (e.g., PROFINET, PROFIsafe, Ether-<br>Net/IP, EtherCAT, TCP/IP, etc.).|
|---|---|



## Classifications 

|**ECLASS 5.0**|19039001|
|---|---|
|**ECLASS 5.1.4**|19039001|
|**ECLASS 6.0**|19179090|
|**ECLASS 6.2**|19179090|
|**ECLASS 7.0**|19179090|
|**ECLASS 8.0**|19179090|
|**ECLASS 8.1**|19179090|
|**ECLASS 9.0**|19179090|
|**ECLASS 10.0**|19179090|
|**ECLASS 11.0**|19170500|
|**ECLASS 12.0**|19170500|
|**ETIM 5.0**|EC000515|
|**ETIM 6.0**|EC000515|
|**ETIM 7.0**|EC000515|
|**ETIM 8.0**|EC000515|
|**UNSPSC 16.0901**|43201404|



**2024-04-23 12:44:46 | Product data sheet Subject to change without notice** 

**INTEGRATION PRODUCTS | SICK** 

**3** 

**ISD400-7311 | ISD400** OPTICAL DATA TRANSMISSION 

## Dimensional drawing (Dimensions in mm (inch)) 

**==> picture [358 x 321] intentionally omitted <==**

**----- Start of picture text -----**<br>
71.7 30<br>(2.82) (1.18)<br>(Bey 1<br>60 (2.34) 123.5 (4.86)<br>2<br>1 5<br>4<br>6<br>SS 116.2 (4.57) Mae<br>7 8 9<br>= 68.7 (2.70)<br>3<br>M6<br>40 (3.27) (4.13)<br>(1.57)<br>83  105<br>11<br>(0.43)<br>32<br>(1.26)<br>Esc<br>Set<br>**----- End of picture text -----**<br>


- ① Threaded mounting hole M6 

- ② Center of optical axis, sender 

- ③ Receive indicator 

- ④ Center of optical axis, receiver 

- ⑤ Ethernet female connector M12, 4-pin, D-coded 

- ⑥ Power supply male connector M12, 4-pin, A-coded 

- ⑦ Display with pushbuttons 

- ⑧ Optical adjustment aid 

- ⑨ Alignment sight 

## Connection type 

Ethernet connection type 

**==> picture [118 x 66] intentionally omitted <==**

**----- Start of picture text -----**<br>
3 4<br>2 1<br>Voltage supply connection type<br>**----- End of picture text -----**<br>


1 4 2 ~~&)~~ 3 

**4** 

**Product data sheet | 2024-04-23 12:44:46 Subject to change without notice** 

**INTEGRATION PRODUCTS | SICK** 

**ISD400-7311 | ISD400** OPTICAL DATA TRANSMISSION 

## Connection diagram 

Voltage supply connection diagram 

|brn|1|L+|
|---|---|---|
|wht|2|MF2|
|blu|3|M|
|blk|4|MF1|



Ethernet connection diagram 

1 Tx+ 2 Rx+ 3 Tx– 4 Rx– 

## Adjustment possible 

**==> picture [55 x 35] intentionally omitted <==**

**----- Start of picture text -----**<br>
6<br>Set Esc<br>**----- End of picture text -----**<br>


⑥ Liquid crystal display with function keys 

## Recommended accessories 

|Recommended accessories|||
|---|---|---|
|Other models and accessories<br> www.sick.com/ISD400|||
|**Brief description**<br>**Type**<br>**Part no.**<br>a~~es~~|||
|Terminal and alignment brackets|||
|Alignment unit for DME4000/ISD400, aluminum, anodised|BEF-DME/ISD|2046052|



**2024-04-23 12:44:46 | Product data sheet Subject to change without notice** 

**INTEGRATION PRODUCTS | SICK** 

**5** 

## SICK At A GlAnCe 

SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applications. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. 

We have extensive experience in a wide range of industries and understand their processes and requirements. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. 

Comprehensive services complete our offering: SICK lifetime Services provide support throughout the machine life cycle and ensure safety and productivity. 

For us, that is “Sensor Intelligence.” 

## WOrldWIde preSenCe: 

Contacts and other locations www.sick.com 

SICK AG | Waldkirch | Germany | www.sick.com