IK 8800.11 DC 24V

**Installation technique** 

**Remote switch IK 8800, IL 8800** 

According to IEC/EN 60 669 

**==> picture [5 x 22] intentionally omitted <==**

**----- Start of picture text -----**<br>
0222086<br>**----- End of picture text -----**<br>


## **Circuit diagram** 

**==> picture [258 x 516] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||||||
|---|---|---|---|---|---|---|
|14|14|24|14|24|34|
|A1|A2|
|A1|A2|
|A1|A2|
|13|14|
|13|14|
|13|14|23|24|
|23|24|
|33|34|
|A1|A2|A1|A2|A1|A2|
|13|13|23|13|23|33|
|M2107_b|M2108_b|M2115_b|
|IK 8800.01|IK 8800.02|IL 8800.03|
|12|12|24|
|14|24|34|44|14|14|22|
|A1|A2|
|A1|A2|
|A1|A2|
|13|14|
|12|
|23|24|12|11|14|
|11|22|
|33|34|14|
|21|
|24|
|43|44|
|A1|A2|A1|A2|A1|A2|
|13|23|33|43|11|11|21|
|TL|fH.|fH.|
|M2111_b|M2109_b|M2110_b|
|IL 8800.04|IK 8800.11|IK 8800.12|
|14|22|34|12|24|32|44|
|12|24|32|14|22|34|42|
|A1|A2|A1|A2|
|12|
|12|11|
|11|14|
|14|22|
|22|21|24|
|21|24|31|32|
|32|34|
|31|42|
|34|41|
|44|
|A1|A2|A1|A2|
|11|21|31|11|21|31|41|
|M2116_b|M2112_b|
|IL 8800.13|IL 8800.14|

**----- End of picture text -----**<br>


Optionally contacts with up to a maximum of 4 changeover contacts Pushbutton for manual actuation of the contacts Operating position display Width 17,5 mm or 35 mm 

## **Approvals and marking** 

**==> picture [34 x 5] intentionally omitted <==**

**----- Start of picture text -----**<br>
Deutschland<br>**----- End of picture text -----**<br>


## **Function** 

The contacts are actuated with every current pulse and they stay in the operating position they have adopted in each case until the next pulse occurs. It is possible to actuate the contacts manually by pressing a pushbutton provided on the unit. The contact position is shown by an indicator. 

The units can be installed in rows close next to each other for pulse operation. The gap between the relays is 7 mm when they are on permanently. 

## **Indicators** 

red indicator: **Technical data** 

is visible when output contacts are activated 

## **Input** 

**==> picture [251 x 122] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||
|---|---|---|
|Nominal voltage UN:|AC 8, 24, 42, 230 V|
|DC 12, 24 V,|
|other voltages on request|
|Voltage range:|0,9 ... 1,1 UN|
|Nominal consumption:|1,2 contacts|4 contacts|
|apparent power:|5,2 VA|10,4 VA|
|actual power:|4,2 W|8,4 W|
|Nominal frequency:|50 or 60 Hz|
|Frequency range:|5 %|
|Glow lamp parallel|
|to the pushbutton:|||max. 8 lamps à 0,5 mA|
|(corresponds to 4 mA residual current)|
|Minimum on time|> 50 ms|

**----- End of picture text -----**<br>


## **Output** 

**==> picture [235 x 152] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||||
|---|---|---|---|---|---|
|Contacts|
|IK 8800.01:|1 NO contact|
|IK 8800.02:|2 NO contacts|
|IL 8800.03:|3 NO contacts|
|IL 8800.04:|4 NO contacts|
|IK 8800.11:|1 changeover contact|
|IK 8800.12:|2 changeover contacts|
|IL 8800.13:|3 changeover contacts|
|IK 8800.14:|4 changeover contacts|
|Operate time:|< 30 ms|
|Nominal output voltage:|AC 230 V / 400 V|
|Electrical life|
|with resistive load AC 230 V|
|and 500 switching cycles / h:|6 A|150|x 10|[4]|switching cycles|
|10 A|75|x 10|[4]|switching cycles|
|16 A|10|x 10|[4]|switching cycles|

**----- End of picture text -----**<br>


All technical data in this list relate to the state at the moment of edition. We reserve the right for technical improvements and changes at any time. 

IK 8800, IL 8800 / 16.09.03 d 

1 

GL-approval 

IK 8800._ _/66: 

## **Technical data** 

## **Variant** 

## **Switching capacity with lamp load:** 

fluorescent lamp load: duo circuit (series compensated): 

20 lamps with 58 W / contact each 

2 x 20 lamps with 58 W / contact each 5 x 10[4] switching cycles 2 000 W 5 x 10[4] switching cycles 

bulb load: 

**Nominal switching-off capacity:** 

cos. � 1 ... 0,7, AC 230 V: 16 A **Thermal current Ith:** 16 A **Permissible switching frequency:** 1 000 switching cycles / h **Short circuit strength max. fuse rating:** 16 A gL IEC/EN 60 947-5-1 **Mechanical life:** 3 x 10[6] switching cycles 

## **General data** 

**Operating mode:** Pulse operation **Temperature range:** - 20 ... + 45°C **Clearance and creepage distances** 

overvoltage category / contamination level: 4 kV / 2 IEC 60 664-1 **EMC** Electrostatic discharge: 6 kV (contact) IEC/EN 61 000-4-2 Fast transients: 4 kV IEC/EN 61 000-4-4 Surge voltages between wires for power supply: 2 kV IEC/EN 61 000-4-5 between wire and ground: 4 kV IEC/EN 61 000-4-5 HF wire guided: 10 V IEC/EN 61 000-4-6 **Degree of protection:** Housing: IP 30 IEC/EN 60 529 Terminals: IP 20 IEC/EN 60 529 **Housing:** Thermoplastic with V0 behaviour according to UL subject 94 **Vibration resistance:** Amplitude 0,35 mm frequency 10 ... 55 HzIEC/EN 60 068-2-6 **Climate resistance:** Humid heat IEC/EN 60 068-2-30 **Terminal designation:** EN 50 005 **Wire connection:** 2 x 2,5 mm² solid or 2 x 1,5 mm² stranded ferruled DIN 46 228-1/-2/-3/-4 or 2 x 1 mm² stranded ferruled DIN 46 228-1/-2/-3/-4 **Wire fixing:** Flat terminals with self-lifting clamping piece IEC/EN 60 999-1 **Mounting:** DIN rail IEC/EN 60 715 **Weight** IK 8800: 110 g IL 8800: 210 g 

## **Dimensions** 

**Width x height x depth** IK 8800: 17,5 x 89 x 58 mm IL 8800: 35 x 89 x 58 mm 

## **Standard type** 

|IK 8800.01   AC 230 V   50/60 Hz|IK 8800.01   AC 230 V   50/60 Hz||
|---|---|---|
|Article number:|0009273|stock item|
|�Output:|1 NO contact||
|�Nominal voltage UN:|AC 230 V||
|�Width:|17,5 mm||



## **Ordering example for Variant** 

IK 8800 .01 /_ _ AC 230 V 50 Hz Nominal frequency Nominal voltage Variant, if required Contacts Type 

## **Connection examples** 

**==> picture [259 x 189] intentionally omitted <==**

**----- Start of picture text -----**<br>
L<br>N max. 8<br>individual<br>buttons<br>...<br>load<br>A1 A2 13<br>IK8800<br>14<br>M2254_a<br>**----- End of picture text -----**<br>


This circuit can be used with up to 8 illuminated pushbuttons. 

**==> picture [259 x 192] intentionally omitted <==**

**----- Start of picture text -----**<br>
L<br>N<br>unlimited<br>number of<br>individual<br>buttons<br>...<br>load<br>A1 A2 13<br>IK8800<br>14<br>M2255_a<br>**----- End of picture text -----**<br>


With this circuit it is possible to connect as many illuminated pushbuttons as required to a remote switch. 

When low voltages are being used, the control circuit has to be disconnected from the mains system by means of a transformer. It is only possible to illuminate the pushbuttons here by providing a third control wire. 

2 

## **Specifiaction for tender for IK 8800** 

Remote switch according to IEC/EN 60 669 to be built in consumer units, 1 NO contact, pushbutton for manual actuation of the contacts and operating position display. Width 17,5 mm. Type IK 8800.01 Manufactured by: E. DOLD & SÖHNE KG 

Remote switch according to IEC/EN 60 669 to be built in consumer units, 2 NO contacts, pushbutton for manual actuation of the contacts and operating position display. Width 17,5 mm. Type IK 8800.02 Manufactured by: E. DOLD & SÖHNE KG 

Remote switch according to IEC/EN 60 669 to be built in consumer units, 4 NO contacts, pushbutton for manual actuation of the contacts and operating position display. Width 35 mm. Type IK 8800.04 Manufactured by: E. DOLD & SÖHNE KG 

Remote switch according to IEC/EN 60 669 to be built in consumer units, 1 changeover contact, pushbutton for manual actuation of the contacts and operating position display. Width 17,5 mm. Type IK 8800.11 Manufactured by: E. DOLD & SÖHNE KG 

Remote switch according to IEC/EN 60 669 to be built in consumer units, 2 changeover contacts, pushbutton for manual actuation of the contacts and operating position display. Width 17,5 mm. Type IK 8800.12 Manufactured by: E. DOLD & SÖHNE KG 

Remote switch according to IEC/EN 60 669 to be built in consumer units, 4 changeover contacts, pushbutton for manual actuation of the contacts and operating position display. Width 17,5 mm. Type IK 8800.14 Manufactured by: E. DOLD & SÖHNE KG 

3 

**E. DOLD & SÖHNE KG • D-78114 Furtwangen** • Postf. 1251 • Tel. +49 7723 654 0 • Telefax +49 7723 654 356 

e-mail dold-relays@t-online.de • internet http://www.dold.com 

4