IDPV-45A-60

LED Driver, 45 W, 60 VDC, 750 mA, Constant Voltage, 90 V

⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
Manufacturer: MEAN WELL
Product type: AC / DC LED Power Supplies
SVHC: No SVHC (12-Jan-2017)
Product Range: IDPV-45
Output Current: 750mA
LED Driver Mode: Constant Voltage
Output Power Max: 45W
Input Voltage Max: 295V
Input Voltage Min: 90V
Output Voltage Max: 60VDC
Power Supply Applications: -
Delivery and price
Units per pack	20
Price	13.77 €
Current stock	10+
Lead time	30 days
Datasheet
**- IDPV 45 series** 

45W PWM Output LED Driver 

## ■ 

S&E O ~~P~~ sev GD) Kos Whis© CBCE ■ 

## ■ 

～ to the ℃ ~+40 ℃ 

## ■ 

**==> picture [245 x 16] intentionally omitted <==**

**----- Start of picture text -----**<br>
|«| A [2] [in] [1] [dimming] [and] [Auxiliary] DC [output]<br>**----- End of picture text -----**<br>


_File Name:IDPV-45-SPEC   2018-01-15_ 

**- IDPV 45 series** 

45W PWM Output LED Driver 

## **SPECIFICATION** 

|**IDPV-45    -12**<br>**IDPV-45    -24**<br>**IDPV-45    -36**<br>**IDPV-45    -48**<br>**IDPV-45    -60**<br>**MODEL**<br>**OUTPUT**<br>**FREQUENCY RANGE**<br>**POWER FACTOR (Typ.)**<br>**EFFICIENCY (Typ.)**<br>**AC CURRENT (Typ.)**<br>**INPUT**<br>**INRUSH CURRENT(Typ.)**<br>**LEAKAGE CURRENT**<br>**SAFETY STANDARDS**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**TEMP. COEFFICIENT**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**NOTE**<br>**PACKING**<br>**OVER CURRENT**<br>47 ~ 63Hz<br>105 ~ 115%<br>20 ~ 90% RH non-condensing<br>-40 ~ +80<br>, 10 ~ 95% RH<br>℃<br>±<br>℃<br>℃<br>0.03%/<br>(0 ~ 40<br>)<br>10 ~ 500Hz, 2G 10min./1cycle, period for  60min. each along X, Y, Z axes<br>**ENVIRONMENT**<br>**SAFETY &**<br>**EMC**<br>**PROTECTION**<br>**EMC IMMUNITY**<br>**EMC EMISSION**<br>**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>**TOTAL HARMONIC DISTORTION**<br>I/P-O/P:3.75KVAC<br>I/P-O/P:100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃<br>±10%<br>0~100%<br>84%<br>86%<br>88%<br>88%<br>90%<br>0.6A / 115VAC       0.4A / 230VAC          0.3A / 277VAC<br><0.75mA / 277VAC<br>120*66.5*22mm (L*W*H)<br>0.14Kg;81pcs/12.5Kg/ 1.32CUFT<br>**SHORT CIRCUIT**<br>**DIMMING RANGE**<br>**DC VOLTAGE**<br>**RATED POWER**<br>**SETUP TIME Note.3**<br>**VOLTAGE TOLERANCE**<br>**VOLTAGE RANGE Note.2**<br>1KHz( 20%)<br>±<br>500ms / 230VAC             1200ms/115VAC<br>12V<br>24V<br>36V<br>48V<br>60V<br>3.0A<br>1.88A<br>1.25A<br>0.94A<br>36W<br>45.12W<br>45W<br>45.12W<br>0.75A<br>45W<br>**PWM FREQUENCY (Typ.)**<br>**AUXILIARY DC OUTPUT Note.4**<br>Nominal 12V(deviation 11.4~12.6)@50mA for A-Type only<br>(Please refer to "STATIC CHARACTERISTIC" section)<br>90 ~ 295VAC          127 ~ 417VDC<br>PF>0.95/115VAC, PF>0.92/230VAC, PF>0.9/277VAC@full load<br>(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)<br>THD< 20%(@load 60%/115VAC,230VAC; @load 75%/277VAC)<br>≧<br>≧<br>(Please refer to “TOTAL HARMONIC DISTORTION” section)<br>COLD START 30A(twidth=<br>s measured at 50% Ipeak) at 230VAC<br>150μ<br>;Per NEMA 410<br><0.5W for Blank-Type, <1.2W for A-Type<br>**NO LOAD POWER CONSUMPTION**<br>**WORKING TEMP.**<br>Ta=-20 ~ +40<br>(Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)<br>℃<br>UL8750,CSA C22.2 NO.250.13-12;ENEC EN61347-1 & EN61347-2-13 independent, EN62384,GB19510.1,GB19510.14 approved<br>Compliance to EN55015, EN61000-3-2 Class C (<br>) ; EN61000-3-3,GB17743,GB17625.1<br>@load<br>60%<br>≧<br>Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level(<br>)<br>surge immunity:Line-Line:1KV<br>℃<br>**MAX. No. of PSUs on 16A**<br>**CIRCUIT BREAKER**<br>32 units (circuit breaker of type B) / 32 units  (circuit breaker of type C) at 230VAC<br>**RATED CURRENT**<br>Protection type : Hiccup mode, recovers automatically after fault condition is removed<br>Shut down O/P voltage, re-power on to recovery<br>397.61K hrs min.      MIL-HDBK-217F (25<br>)<br>℃<br>1. All parameters NOT specially mentioned are measured at230VAC input, rated currentand 25 _of ambient temperature.<br>2. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.<br>3. Length of set up time is measured at cold first start. Turning ON/OFF the driver may lead to increase of the set up time.<br>4. Aux. 12V will be damaged with short circuit; It will not be available with dimming off or output no load condition.<br>5. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be<br>affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.|**IDPV-45    -12**<br>**IDPV-45    -24**<br>**IDPV-45    -36**<br>**IDPV-45    -48**<br>**IDPV-45    -60**<br>**MODEL**<br>**OUTPUT**<br>**FREQUENCY RANGE**<br>**POWER FACTOR (Typ.)**<br>**EFFICIENCY (Typ.)**<br>**AC CURRENT (Typ.)**<br>**INPUT**<br>**INRUSH CURRENT(Typ.)**<br>**LEAKAGE CURRENT**<br>**SAFETY STANDARDS**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**TEMP. COEFFICIENT**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**NOTE**<br>**PACKING**<br>**OVER CURRENT**<br>47 ~ 63Hz<br>105 ~ 115%<br>20 ~ 90% RH non-condensing<br>-40 ~ +80<br>, 10 ~ 95% RH<br>℃<br>±<br>℃<br>℃<br>0.03%/<br>(0 ~ 40<br>)<br>10 ~ 500Hz, 2G 10min./1cycle, period for  60min. each along X, Y, Z axes<br>**ENVIRONMENT**<br>**SAFETY &**<br>**EMC**<br>**PROTECTION**<br>**EMC IMMUNITY**<br>**EMC EMISSION**<br>**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>**TOTAL HARMONIC DISTORTION**<br>I/P-O/P:3.75KVAC<br>I/P-O/P:100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃<br>±10%<br>0~100%<br>84%<br>86%<br>88%<br>88%<br>90%<br>0.6A / 115VAC       0.4A / 230VAC          0.3A / 277VAC<br><0.75mA / 277VAC<br>120*66.5*22mm (L*W*H)<br>0.14Kg;81pcs/12.5Kg/ 1.32CUFT<br>**SHORT CIRCUIT**<br>**DIMMING RANGE**<br>**DC VOLTAGE**<br>**RATED POWER**<br>**SETUP TIME Note.3**<br>**VOLTAGE TOLERANCE**<br>**VOLTAGE RANGE Note.2**<br>1KHz( 20%)<br>±<br>500ms / 230VAC             1200ms/115VAC<br>12V<br>24V<br>36V<br>48V<br>60V<br>3.0A<br>1.88A<br>1.25A<br>0.94A<br>36W<br>45.12W<br>45W<br>45.12W<br>0.75A<br>45W<br>**PWM FREQUENCY (Typ.)**<br>**AUXILIARY DC OUTPUT Note.4**<br>Nominal 12V(deviation 11.4~12.6)@50mA for A-Type only<br>(Please refer to "STATIC CHARACTERISTIC" section)<br>90 ~ 295VAC          127 ~ 417VDC<br>PF>0.95/115VAC, PF>0.92/230VAC, PF>0.9/277VAC@full load<br>(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)<br>THD< 20%(@load 60%/115VAC,230VAC; @load 75%/277VAC)<br>≧<br>≧<br>(Please refer to “TOTAL HARMONIC DISTORTION” section)<br>COLD START 30A(twidth=<br>s measured at 50% Ipeak) at 230VAC<br>150μ<br>;Per NEMA 410<br><0.5W for Blank-Type, <1.2W for A-Type<br>**NO LOAD POWER CONSUMPTION**<br>**WORKING TEMP.**<br>Ta=-20 ~ +40<br>(Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)<br>℃<br>UL8750,CSA C22.2 NO.250.13-12;ENEC EN61347-1 & EN61347-2-13 independent, EN62384,GB19510.1,GB19510.14 approved<br>Compliance to EN55015, EN61000-3-2 Class C (<br>) ; EN61000-3-3,GB17743,GB17625.1<br>@load<br>60%<br>≧<br>Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level(<br>)<br>surge immunity:Line-Line:1KV<br>℃<br>**MAX. No. of PSUs on 16A**<br>**CIRCUIT BREAKER**<br>32 units (circuit breaker of type B) / 32 units  (circuit breaker of type C) at 230VAC<br>**RATED CURRENT**<br>Protection type : Hiccup mode, recovers automatically after fault condition is removed<br>Shut down O/P voltage, re-power on to recovery<br>397.61K hrs min.      MIL-HDBK-217F (25<br>)<br>℃<br>1. All parameters NOT specially mentioned are measured at230VAC input, rated currentand 25 _of ambient temperature.<br>2. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.<br>3. Length of set up time is measured at cold first start. Turning ON/OFF the driver may lead to increase of the set up time.<br>4. Aux. 12V will be damaged with short circuit; It will not be available with dimming off or output no load condition.<br>5. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be<br>affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.|**IDPV-45    -12**|**IDPV-45    -24**|**IDPV-45    -36**|**IDPV-45    -48**|**IDPV-45    -60**|
|---|---|---|---|---|---|---|
||**DC VOLTAGE**|12V|24V|36V|48V|60V|
||**RATED CURRENT**|3.0A|1.88A|1.25A|0.94A|0.75A|
||**RATED POWER**|36W|45.12W|45W|45.12W|45W|
||**DIMMING RANGE**|0~100%|||||
||**VOLTAGE TOLERANCE**|±10%|||||
||**PWM FREQUENCY (Typ.)**|1KHz( 20%)<br>±|||||
||**SETUP TIME Note.3**|500ms / 230VAC             1200ms/115VAC|||||
||**AUXILIARY DC OUTPUT Note.4**|Nominal 12V(deviation 11.4~12.6)@50mA for A-Type only|||||
||**VOLTAGE RANGE Note.2**|(Please refer to "STATIC CHARACTERISTIC" section)<br>90 ~ 295VAC          127 ~ 417VDC|||||
||**FREQUENCY RANGE**|47 ~ 63Hz|||||
||**POWER FACTOR (Typ.)**|PF>0.95/115VAC, PF>0.92/230VAC, PF>0.9/277VAC@full load<br>(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)|||||
||**TOTAL HARMONIC DISTORTION**|THD< 20%(@load 60%/115VAC,230VAC; @load 75%/277VAC)<br>≧<br>≧<br>(Please refer to “TOTAL HARMONIC DISTORTION” section)|||||
||**EFFICIENCY (Typ.)**|84%|86%|88%|88%|90%|
||**AC CURRENT (Typ.)**|0.6A / 115VAC       0.4A / 230VAC          0.3A / 277VAC|||||
||**INRUSH CURRENT(Typ.)**|COLD START 30A(twidth=<br>s measured at 50% Ipeak) at 230VAC<br>150μ<br>;Per NEMA 410|||||
||**MAX. No. of PSUs on 16A**<br>**CIRCUIT BREAKER**|32 units (circuit breaker of type B) / 32 units  (circuit breaker of type C) at 230VAC|||||
||**LEAKAGE CURRENT**|<0.75mA / 277VAC|||||
||**NO LOAD POWER CONSUMPTION**|<0.5W for Blank-Type, <1.2W for A-Type|||||
||**SHORT CIRCUIT**|Shut down O/P voltage, re-power on to recovery|||||
||**OVER CURRENT**|105 ~ 115%<br>Protection type : Hiccup mode, recovers automatically after fault condition is removed|||||
||**WORKING TEMP.**|Ta=-20 ~ +40<br>(Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)<br>℃|||||
||**WORKING HUMIDITY**|20 ~ 90% RH non-condensing|||||
||**STORAGE TEMP., HUMIDITY**|-40 ~ +80<br>, 10 ~ 95% RH<br>℃|||||
||**TEMP. COEFFICIENT**|±<br>℃<br>℃<br>0.03%/<br>(0 ~ 40<br>)|||||
||**VIBRATION**|10 ~ 500Hz, 2G 10min./1cycle, period for  60min. each along X, Y, Z axes|||||
||**SAFETY STANDARDS**|UL8750,CSA C22.2 NO.250.13-12;ENEC EN61347-1 & EN61347-2-13 independent, EN62384,GB19510.1,GB19510.14 approved|||||
||**WITHSTAND VOLTAGE**|I/P-O/P:3.75KVAC|||||
||**ISOLATION RESISTANCE**|I/P-O/P:100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃|||||
||**EMC EMISSION**|Compliance to EN55015, EN61000-3-2 Class C (<br>) ; EN61000-3-3,GB17743,GB17625.1<br>@load<br>60%<br>≧|||||
||**EMC IMMUNITY**|Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level(<br>)<br>surge immunity:Line-Line:1KV|||||
||**MTBF**|397.61K hrs min.      MIL-HDBK-217F (25<br>)<br>℃|||||
||**DIMENSION**|120*66.5*22mm (L*W*H)|||||
||**PACKING**|0.14Kg;81pcs/12.5Kg/ 1.32CUFT|||||
||℃<br>1. All parameters NOT specially mentioned are measured at230VAC input, rated currentand 25 _of ambient temperature.<br>2. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.<br>3. Length of set up time is measured at cold first start. Turning ON/OFF the driver may lead to increase of the set up time.<br>4. Aux. 12V will be damaged with short circuit; It will not be available with dimming off or output no load condition.<br>5. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be<br>affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.||||||



_File Name:IDPV-45-SPEC   2018-01-15_ 

**- IDPV 45 series** 

45W PWM Output LED Driver 

## **DIMMING OPERATION** 

**==> picture [185 x 103] intentionally omitted <==**

**----- Start of picture text -----**<br>
T 3.15AL/250VAC<br>/300VAC<br>ACLACLACNACN TB1 +<br>HS1<br>C107<br>DIM+DIM-Vo+Vo- TB2<br>-<br>I<br>**----- End of picture text -----**<br>


※ **Dimming principle for PWM style output** 

Dimming is achieved by varying the duty cycle of the output current. 

**==> picture [436 x 435] intentionally omitted <==**

**----- Start of picture text -----**<br>
ON<br>Output DC current<br>TON<br>Duty cycle(%) = ×100%<br>T<br>OFF Output PWM frequency : 1KHz(±20%)<br>Io=0A<br>TON<br>T<br> 2 in 1 dimming function<br>Applying additive 0 ~ 10VDC 100%<br>90%<br>80%<br>+<br>Vo+ + 70%<br>60%<br>-<br>Vo- - 50%<br>DIM+ 40%<br>+<br>Additive Voltage 30%<br>- 20%<br>DIM-<br>10%<br>“DO NOT connect "DIM- to Vo-” 0%<br>0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V<br>Dimming input: Additive voltage<br>Applying additive 10V PWM signal (frequency range 300~3000Hz): 100%<br>90%<br>80%<br>+<br>Vo+ + 70%<br>60%<br>-<br>Vo- - 50%<br>DIM+ 40%<br>Additive PWM signal 30%<br>20%<br>DIM-<br>10%<br>“DO NOT connect "DIM- to Vo-” 0%<br>0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%<br>Duty cycle of additive 10V PWM signal dimming input<br>Duty cycle of output current (%)<br>Duty cycle of output current (%)<br>**----- End of picture text -----**<br>


※ **2 in 1 dimming function** 

**==> picture [98 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
◎ Applying additive 0 ~ 10VDC<br>**----- End of picture text -----**<br>


**==> picture [219 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
◎ Applying additive 10V PWM signal (frequency range 300~3000Hz):<br>**----- End of picture text -----**<br>


Note : 1. Min. duty cycle of output current is about 8% and the output current is not defined when 0%< Iout<8%. 2. The duty cycle of output current could drop down to 0% when dimming input is about 0Vdc or 10V PWM signal with 0% duty cycle. 

_File Name:IDPV-45-SPEC   2018-01-15_ 

**- IDPV 45 series** 

45W PWM Output LED Driver 

## **OUTPUT LOAD vs TEMPERATURE** 

**==> picture [517 x 601] intentionally omitted <==**

**----- Start of picture text -----**<br>
100<br>80<br>70<br>60<br>40<br>20<br>-20 -10 0 10 20 30 40 (HORIZONTAL)<br>AMBIENT TEMPERATURE,Ta ( ℃ )<br>STATIC CHARACTERISTIC POWER FACTOR (PF) CHARACTERISTIC<br>100<br>90 for 12V model 1.00<br>80 0.95<br>70 for others 0.90 277(45W)<br>230(45W)<br>60 0.85 115(36W)<br>50<br>0.80<br>40<br>0.75<br>50% 60% 70% 80% 90% 100%<br>90 100 135 180 200 230 295<br>INPUT VOLTAGE (V) LOAD<br>※De-rating is needed under low input voltage.<br>TOTAL HARMONIC DISTORTION (THD) EFFICIENCY vs LOAD<br>IDPV-45 series possess superior working efficiency that up to 90% can<br>be reached in field applications.<br>※ 60V Model ※ 60V Model<br>91%<br>19.00%<br>90%<br>17.00%<br>15.00% 89% 277(45W)<br>13.00% 277(45W)230(45W) 88% 230(45W)115(36W)<br>11.00% 115(36W)<br>87%<br>9.00%<br>7.00% 86%<br>5.00%<br>50% 60% 70% 80% 90% 100% 85%<br>50% 60% 70% 80% 90% 100%<br>LOAD LOAD<br>LOAD (%)<br>PF<br>LOAD (%)<br>THD(%)<br>EFFICIENCY(%)<br>**----- End of picture text -----**<br>


_File Name:IDPV-45-SPEC   2018-01-15_ 

**- IDPV 45 series** 

45W PWM Output LED Driver 

**==> picture [511 x 668] intentionally omitted <==**

**----- Start of picture text -----**<br>
BLOCK DIAGRAM<br>fosc :  70~150KHz<br>RECTIFIERS AUX+(for A-Type)<br>AUX-(for A-Type)<br>EMI FILTER POWER RECTIFIERS Vo+<br>I/P & SWITCHING &<br>RECTIFIERS FILTER Vo-<br>CURRENT DIM+<br>LIMIT DIM-<br>O.L.P. DETECTION<br>PWM&PFC CIRCUIT<br>CONTROL<br>MECHANICAL SPECIFICATION<br>※  Blank-Type Unit:mm<br>120<br>112<br>T 3.15AL/250VAC<br>/300VAC<br>ACLACL TB1 +<br>ACN<br>ACN<br>HS1<br>C107<br>DIM+TB2<br>DIM-<br>Vo+<br>Vo-<br>Terminal Pin No. Assignment(TB1)<br>Pin No. Assignment Terminal Pin No. Assignment(TB2)<br>1 ACL Pin No. Assignment<br>2 ACL 1 DIM+<br>3 ACN 2 DIM-<br>4 ACN 3 Vo+<br>4 Vo-<br>58.5 66.5<br>22<br>-<br>3<br>I<br>**----- End of picture text -----**<br>


_File Name:IDPV-45-SPEC   2018-01-15_ 

**- IDPV 45 series** 

45W PWM Output LED Driver 

**==> picture [327 x 332] intentionally omitted <==**

**----- Start of picture text -----**<br>
120<br>112<br>T 3.15AL/250VAC<br>/300VAC<br>ACLACL TB1 +<br>ACN<br>ACN<br>HS1<br>C107<br>DIM+TB2<br>DIM-<br>Vo+<br>Vo-<br>AUX+<br>AUX-<br>Terminal Pin No. Assignment(TB2)<br>Pin No. Assignment Pin No. Assignment<br>1 DIM+ 4 Vo-<br>2 DIM- 5 AUX+<br>3 Vo+ 6 AUX-<br>58.5 66.5<br>22<br>-<br>3<br>I<br>**----- End of picture text -----**<br>


※ **A-Type** 

|Terminal Pin No. Assignment(TB1)<br>Pin No.<br>1<br>2<br>Assignment<br>ACL<br>ACL<br>3<br>4<br>ACN<br>ACN|Terminal Pin No. Assignment(TB1)<br>Pin No.<br>1<br>2<br>Assignment<br>ACL<br>ACL<br>3<br>4<br>ACN<br>ACN|
|---|---|
|Pin No.|Assignment|
|1|ACL|
|2|ACL|
|3|ACN|
|4|ACN|



## **INSTALLATION MANUAL** 

Please refer to : http://www.meanwell.com/manual.html 

_File Name:IDPV-45-SPEC   2018-01-15_
Updated at April 17, 2026
About Novapart

Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →
Stock Shortage Specialist

When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →
Compliant Alternatives

We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →