ICB18L50N08NC

**Proximity Inductive SensorsICB, M18 Standard Range, Nickel-Plated Brass Housing Types ICB, M18** 

- **Sensing distance: 5 to 8 mm** 

- **Flush or non-flush types** 

- **Short or long body versions** 

- **Rated operational voltage (Ub): 10 - 36 VDC** 

- **Output: DC 200 mA, NPN or PNP** 

- **Normally open or Normally closed** 

- **LED indication for output ON** 

- **Protection: reverse polarity, short circuit, transients** 

- **Cable or M12 plug versions** 

- **According to IEC 60947-5-2** 

- **Laser engraved on front cap, permanently legible** 

- **CSA certified for Hazardous Locations** 

## **Product Descri tion p** 

## **Orderin Ke g y** 

**ICB18S30F05NOM1** A family of inductive proxOutput is open collector **Type** imity switches in industriNPN or PNP transistors. **Housing style** al ~~|~~ standard nickel-plated **Housing material** brass housings. They are **Housing size** able to handle applications **Housing length** where high sensing range is **Thread length** requested. **Detection principle Sensing distance Output type Output configuration Connection** 

## **T e Selection yp** 

**ConnecBody Rated Ordering no. Ordering no. Ordering no. Ordering no. tion style operating NPN, PNP, NPN, PNP, distance Sn Normally open Normally open Normally closed Normally closed** Cable Short 5 mm[1)] **ICB18S30F05NO ICB18S30F05PO ICB18S30F05NC ICB18S30F05PC** Cable Short 8 mm[2)] **ICB18S30N08NO ICB18S30N08PO ICB18S30N08NC ICB18S30N08PC** Plug Short 5 mm[1)] **ICB18S30F05NOM1 ICB18S30F05POM1 ICB18S30F05NCM1 ICB18S30F05PCM1** Plug Short 8 mm[2)] **ICB18S30N08NOM1 ICB18S30N08POM1 ICB18S30N08NCM1 ICB18S30N08PCM1** Cable Long 5 mm[1)] **ICB18L50F05NO ICB18L50F05PO ICB18L50F05NC ICB18L50F05PC** Cable Long 8 mm[2)] **ICB18L50N08NO ICB18L50N08PO ICB18L50N08NC ICB18L50N08PC** Plug Long 5 mm[1)] **ICB18L50F05NOM1 ICB18L50F05POM1 ICB18L50F05NCM1 ICB18L50F05PCM1** Plug Long 8 mm[2)] **ICB18L50N08NOM1 ICB18L50N08POM1 ICB18L50N08NCM1 ICB18L50N08PCM1** 

1) For flush mounting in metal 

2) For non-flush mounting in metal 

## **S ecifications p** 

|**Specifications**||
|---|---|
|**Rated operational voltage (Ub**)10 to 36 VDC|10 to 36 VDC(ripple incl.)|
|**Ripple**|≤ 10%|
|**Output current (Ie)**|≤ 200 mA @ 50°C<br>(≤ 150 mA @ 50-70°C)|
|**OFF-state current** **(Ir)** <br>**No load supply current** **(Io)**<br>**Voltage drop (Ud) **<br>**Protection**<br>**Voltage transient**<br>**Power ON delay (tv)**|≤ 50μA<br>≤ 15 mA<br>Max. 2.5 VDC @ 200 mA<br>Reverse polarity,<br>short-circuit,transients<br>1 kV/0.5 J<br>≤ 20 ms|
|**Operating frequency (f)**|≤ 1500 Hz|
|**Indication for output ON**|Activated LED, yellow|
|NO version<br>NC version|Target present<br>Target not present|



|**Indication for short circuit/**||
|---|---|
|**overload**|LED blinking (f = 2 Hz)|
|**Assured operating**||
|**sensing distance(Sa) **|0 ≤ Sa≤ 0.81 x Sn|
|**Effective operating**||
|**distance(Sr) **|0.9 x Sn≤ Sr≤ 1.1 x Sn|
|**Usable operating distance(Su) **|0.9 x Sr≤ Su≤ 1.1 x Sr|
|**Repeat accuracy (R) **|≤ 10%|
|**Differential travel (H)**||
|(Hysteresis)|1 to 20% of sensingdist.|
|**Ambient temperature**||
|Operating|-25° to +70°C (-13° to +158°F)|
|Storage|-30° to +80°C(-22° to +176°F)|
|**Shock and vibration**|IEC 60947-5-2/7.4|
|**Housing material**||
|Body|Nickel-plated brass|
|Front|Grey thermoplastic polyester|



**1** 

Specifications are subject to change without notice (16.01.2017) 

**ICB, M18** 

## **Specifications (cont.)** 

|**Connection**|||
|---|---|---|
|Cable||Ø4.1 x 2 m, 3 x 0.25 mm2,|
|Plug||grey PVC, oil proof<br>M12 x 1|
|**Degree ofprotection**||IP 67|
|**Weight**(cable/nuts included)|||
|Cable||Max. 150 g|
|Plug||Max. 70g|
|**Dimensions**<br>**Tightening torque**<br> Non-flush version<br>Flush version|**Tightening torque**<br>Non-flush version|See diagrams below<br>25 Nm|
|From 0 to 7 mm||20 Nm|
|> 7 mm||25 Nm|
|**Approvals**|**cULus**|(UL508)|
||**cCSAus**|As Process Control|
|||Equipment for Hazardous|
|Note: The terminal connector||Locations.|
|(version ...M1) was not||- Class I, Division 2,|
|evaluated. The suitability of||Groups A, B, C and D.|
|the terminal connector should||-T5 up to 150 mA, T4A for a|
|be determined in the end-use||load current > 150 mA and|
|application.||up to 200 mA, Enclosure|
|||Type 4.|



**Approvals (cont.)** Ambient temperature Ta: -25° to +60°C CCC is not required for products with a maximum operating voltage of ≤ 36 V **EMC protection** According to IEC 60947-5-2 IEC 61000-4-2 (ESD) 8 KV air discharge, 4 KV contact discharge IEC 61000-4-3 3 V/m IEC 61000-4-4 2 kV IEC 61000-4-6 3 V IEC 61000-4-8 30 A/m **MTTFd** 850 years @ 50°C (122°F) 

## **Dimensions (mm)** 

**==> picture [230 x 329] intentionally omitted <==**

**----- Start of picture text -----**<br>
7.5 LED<br>30.0 20.1<br>53.0<br>Short body, flush version, cable<br>S S<br>7.5 LED (4 x 90°)<br>4 3<br>1 2<br>30.0<br>54.0<br>Short body, flush version, plug<br>7.5 LED<br>50.0<br>73.1<br>Long body, flush version, cable<br>M18x1<br>M18x1<br>M18x1<br>**----- End of picture text -----**<br>


**==> picture [156 x 94] intentionally omitted <==**

**----- Start of picture text -----**<br>
7.5 LED<br>10.0 30.0 20.1<br>63.0<br>Short body, non-flush version, cable<br>M18x1<br>**----- End of picture text -----**<br>


**==> picture [225 x 206] intentionally omitted <==**

**----- Start of picture text -----**<br>
7.5 LED (4 x 90°)<br>4 3<br>1 2<br>10.0 30.0<br>64.0<br>Short body, non-flush version, plug<br>7.5 LED<br>10.0 50.0<br>83.1<br>Long body, non-flush version, cable<br>M18x1<br>M18x1<br>**----- End of picture text -----**<br>


**2** 

Specifications are subject to change without notice (16.01.2017) 

**ICB, M18** 

## **Dimensions (mm) (cont.)** 

**==> picture [492 x 97] intentionally omitted <==**

**----- Start of picture text -----**<br>
7.5 LED (4 x 90°) 7.5 LED (4 x 90°)<br>4 3 4 3<br>1 2 1 2<br>50.0 10.0 50.0<br>74.0 84.0<br>Long body, flush version, plug Long body, non-flush version, plug<br>M18x1 M18x1<br>**----- End of picture text -----**<br>


## **Installation** 

Flush sensor, when installed in damping material, must be according to Picture 1A. 

**==> picture [180 x 140] intentionally omitted <==**

**----- Start of picture text -----**<br>
Picture 1A<br>Free zone or<br>≥ 3 x Sn non-damping<br>d<br>material<br>Sn : nominal sensing distance<br>d : sensor diameter (18 mm)<br>**----- End of picture text -----**<br>


Non-flush sensor, when installed in damping material, must be according to Picture 1B. 

**==> picture [210 x 140] intentionally omitted <==**

**----- Start of picture text -----**<br>
Picture 1B<br>Free zone or<br>≥ 3 x d<br>≥ 3 x Sn non-damping<br>d<br>material<br>Sn : nominal sensing distance<br>d : sensor diameter (18 mm)<br>≥ 2 x Sn<br>**----- End of picture text -----**<br>


Flush sensors, when installed together in damping material, must be according to Picture 2A. 

**==> picture [150 x 141] intentionally omitted <==**

**----- Start of picture text -----**<br>
Picture 2A<br>d  d  d<br>d : sensor diameter (18 mm)<br>**----- End of picture text -----**<br>


Non-flush sensors, when installed together in damping material, must be according to Picture 2B. 

**==> picture [192 x 140] intentionally omitted <==**

**----- Start of picture text -----**<br>
Picture 2B<br>d d 2 x d d d<br>d : sensor diameter (18 mm)<br>**----- End of picture text -----**<br>


For sensors installed opposite each other, a minimum space of 6 x Sn (the nominal sensing distance) must be observed (See Picture 3). 

**Picture 3** 

**==> picture [99 x 64] intentionally omitted <==**

**----- Start of picture text -----**<br>
≥ 6 x Sn<br>Sn : nominal sensing distance<br>**----- End of picture text -----**<br>


**3** 

Specifications are subject to change without notice (16.01.2017) 

**ICB, M18** 

## **Wiring Diagram** 

**==> picture [481 x 100] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 BN + 1 BN + 1 BN + 1 BN +<br>4 BK<br>2 BK 2 BK<br>4 BK<br>3 BU 3 BU<br>- - 3 BU 3 BU<br>an ;7 LV, - x0, -<br>NPN - Normally open NPN - Normally closed PNP - Normally open PNP - Normally closed<br>**----- End of picture text -----**<br>


## **Reduction Factors** 

The rated operating distance is reduced by the use of metals and alloys other than Fe360. 

The most important reduction factors for inductive proximity sensors are shown in Picture 4. 

**Picture 4 Fe360 : Steel CrNi : Chrome-nickel CuZn : Brass Al : Aluminium** St approx. (%] **Cu : Copper** 100 | Fe360 **Sr : Effective operating distance** 

## **Accessories for Plu Versions g** 

**PVC PUR** 3-wire angled connector, 2 m cable **CONB13NF-A2 CONB13NF-A2P** 3-wire angled connector, 5 m cable **CONB13NF-A5 CONB13NF-A5P** 3-wire angled connector, 10 m cable **CONB13NF-A10 CONB13NF-A10P** ~~CO~~ 3-wire angled connector, 15 m cable **CONB13NF-A15 CONB13NF-A15P** ~~<a~~ 3-wire straight connector, ~~e~~ 2 m cable **CONB13NF-S2 CONB13NF-S2P** ~~Cee~~ 3-wire straight connector, 5 m cable **CONB13NF-S5 CONB13NF-S5P** ~~—________] nnn~~ 3-wire straight connector, 10 m cable **CONB13NF-S10 CONB13NF-S10P** ~~ne~~ 3-wire straight connector, ~~——iSY~~ 15 m cable **CONB13NF-S15 CONB13NF-S15P** 

## **Deliver Contents y** 

- Inductive proximity switch ICB. 

- 2 nuts NPB 

**For any additional information or different options, please refer to the “General Accessories - Connector Cables -Type CONB1...” datasheets.** 

- Packaging: plastic bag 

**4** 

Specifications are subject to change without notice (16.01.2017)