HX05-P/SP2

## **Current Transducer HX 03...50-P/SP2** 

## **I = 3 .. 50 A PN** 

For the electronic measurement of currents: DC, AC, pulsed, mixed, with a galvanic isolation between the primary circuit (high power) and the secondary circuit (electronic circuit). 

## **Electrical data** 

|Primary nominal|Primary current|Primary Conductor|**Type**||||
|---|---|---|---|---|---|---|
|r.m.s. current<br> **I**PN (A)|measuring range<br> **I**P(A)1)|Diameter x Turns<br> (mm)||||**Features**|
|3|± 9<br>0.6d x 20T|0.6d x 20T|**HX 03-P/SP2**|||•Galvanic isolation between primary|
|5<br>10<br>15|± 15<br>0.8d x 12T<br>± 30<br>± 45|0.8d x 12T<br>1.1d x 6T<br>1.4d x 4T|**HX 05-P/SP2**<br>**HX 10-P/SP2**<br>**HX 15-P/SP2**|||and secondary circuit<br>•Hall effect measuring principle|
|20|± 60|1.6d x 3T|**HX 20-P/SP2**|||•Isolation voltage  3000V|
|25|± 75|1.6d x 2T|**HX 25-P/SP2**|||•Low power consumption|
|50|± 150<br>1.2 x 6.3 x 1T|1.2 x 6.3 x 1T|**HX 50-P/SP2**|||•Extended measuring range(3x**I**|
|**V**OUT<br>**R**OUT|Output voltage @ ±**I**PN,**R**L= 2 kΩ,**T**A= 25°C<br>Output impedance||VOE±0.625<br>< 50||V<br>Ω|•Single supply from +12V to +15V<br>•Material according to UL94-V0|
|**R **L|Load resistance||≥2||kΩ||
|**V**C<br>**I **C|Supply voltage (± 5 %)<br>Current consumption||+12 .. +15<br>< 15||V<br>mA|**Advantages**|
|**V**d|R.m.s. voltage for AC isolation test,|R.m.s. voltage for AC isolation test, 50/60Hz, 1 mn > 3|||kV||
|**V**e|R.m.s. voltage for partial discharge extinction|||||• Low insection losses|
||at 10pC||≥1||kV|• Easy to mount with automatic|
||Impulse withstand voltage, 1.2/50µs||≥6||kV|handling system|
|**Accuracy-Dynamic performance data**||||||• Small size and space saving<br>•Only one design for wide current|
|**X**|Accuracy @**I**PN,**T**A= 25°C (without offset)<br>< ± 1||< ± 1|% of**I**PN||ratings range|
|**ε**L|Linearity (0 .. ±**I**PN)|< ± 1|< ± 1|% of**I**PN||• High immunity to external|
|**V**OE|Electrical offset voltage,**T**A= 25°C<br>+2.5V±50||+2.5V±50||mV|interference.|
|**V**OH|Hysteresis offset voltage @**I**P= 0;||||||
||after an excursion of 3 x**I**PN|< ± 10|< ± 10||mV||
|**V**OT<br>**TCε**G|Thermal drift of**V**OEmax.  ±<br>Thermal drift of the gain (% of reading)<br>±||max.  ± 1.5<br>± 0.1|mV/K<br>%/K||**Applications**|
|**t **r|Response time @ 90% of**I**P|≤|≤3||µs|•Switched Mode Power Supplies|
|**f**|Frequency bandwidth (-3 dB)2)|50                 kHz|50                 kHz|50                 kHz|50                 kHz|(SMPS)|
|**General data**|**General data**|||||•AC variable speed drives<br>•Uninterruptible Power Supplies|
|**T**A<br>**T**S|Ambient operating temperature<br>Ambient storage temperature|- 25 .. + 85<br>- 25 .. + 85|- 25 .. + 85<br>- 25 .. + 85||°C<br>°C|(UPS)<br>•Electrical appliances|
|**m**|Mass|8|8||g|•Battery supplied applications|
||Min. internal creepage distance/clearance<br>||≥5.5             mm|5.5             mm|5.5             mm|•DC motor drives|
||Isolation material group|I|I||||
||Standards|EN50178|EN50178||||



- Galvanic isolation between primary and secondary circuit 

- Extended measuring range `(` 3x **I** PN `)` 

- Single supply from +12V to +15V 

- Only one design for wide current ratings range 

Notes :[  1)] With **R** L=2kΩ 

2) Small signal only to avoid excessive heating of the magnetic core 

030210/3 

LEM Components 

www.lem.com 

## **HX 03...50-P/SP2** (in mm) 

## HX 03...25-P/SP2 

## HX 50-P/SP2 

**==> picture [445 x 568] intentionally omitted <==**

**----- Start of picture text -----**<br>
19 Max. 19 Max.<br>3 10.85 3 8.8 5.4<br>d<br>4 OUT 6 4 OUT 6 5<br>3 +V 3 +V<br>2 0 2 0<br>1 -V or 0 5 1 -V or 0<br>1.2<br>3 10.85 3 8.8 5.4<br>Top view<br>HX 05-P/<br>SP2<br>41123<br>Terminal Pin Identification Lot No.<br>1.....0V Primary conductor diameter/ dimension<br>2.....0V<br>HX 03-P/ 05-P/ 10-P/ 15-P/ 20-P/ 25-P/ 50-P/<br>3.....+12V to +15V SP2 SP2 SP2 SP2 SP2 SP2 SP2<br>4.....Output d 0.6 0.8 1.1 1.4 1.6 1.6 1.2x6.3<br>5.....Primary input Current(+) Secondary pins dimension<br>6.....Primary input Current(-) 0.5x0.25<br>20Max. 20Max.<br>0.5<br>0.5<br>3.5 3.5 3.5 3<br>6 5<br>3-P=2.54 15.4 Max. 3-P=2.54 15.4 Max.<br>4.5<br>3.5 3.5 1.3<br>**----- End of picture text -----**<br>


Specifications subject to change without notice.