Image not available
Illustrative purposes only
HVGC-650-U-AB
LED Driver, 649.6 W, 58 VDC, 11.2 A, Constant Current, Constant Voltage, 180 V
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: MEAN WELL
- Product type: AC / DC LED Power Supplies
- SVHC: No SVHC (25-Jun-2025)
- Product Range: HVGC-650
- Output Current: 11.2A
- LED Driver Mode: Constant Current, Constant Voltage
- Output Power Max: 649.6W
- Input Voltage Max: 528V
- Input Voltage Min: 180V
- Output Voltage Max: 58VDC
- Power Supply Applications: -
| Delivery and price | |
|---|---|
| Units per pack | 5 |
| Price | 191.64 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
**HVGC - 650 series**
650W Constant Power Mode LED Driver
## ■
## **IP67** 05 & cWA US Ke FE EAL CB C € Type HL ■
## Ⅰ
Ⅰ
**==> picture [13 x 11] intentionally omitted <==**
**----- Start of picture text -----**<br>
■<br>**----- End of picture text -----**<br>
**==> picture [13 x 11] intentionally omitted <==**
**----- Start of picture text -----**<br>
■<br>**----- End of picture text -----**<br>
for -40 ℃ ~+85 ℃ case temperature ingress protection level allows this lighting and stadium light HVGC-650 is so as to provide the optimal Function options Rated output current(2800/4200/5600/1 ： fsL] ： AuxiliaryNone DC output(12V@200mA)(by
_File Name:HVGC-650-SPEC 2019-10-01_
**HVGC - 650 series**
650W Constant Power Mode LED Driver
## **SPECIFICATION**
|**MODEL**<br>**RATED CURRENT**<br>**RATED POWER**<br>**FULL POWER CURRENT RANGE**<br>**OUTPUT**<br>**CURRENT ADJ. RANGE**<br>**VOLTAGE RANGE**<br>**Note.3**<br>**FREQUENCY RANGE**<br>**POWER FACTOR (Typ.)**<br>**EFFICIENCY (Typ.)**<br>**AC CURRENT (Typ.)**<br>**INPUT**<br>**INRUSH CURRENT(Typ.)**<br>**LEAKAGE CURRENT**<br>**SAFETY STANDARDS**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**OVER VOLTAGE**<br>**OVER TEMPERATURE**<br>1400~3500mA<br>47 ~ 63Hz<br>2.1A / 347VAC 1.5A / 480VAC<br><0.75mA / 480VAC<br>Compliance toEN61000-4-2,3,4,5,6,8,11, EN61547,light industry level (surge immunity Line-Earth 8KV, Line-Line 4KV),EAC TP TC 020<br>20 ~ 95% RH non-condensing<br>-40 ~ +80<br>, 10 ~ 95% RH non-condensing<br>℃<br>10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes<br>UL8750 (type”HL”),CSA C22.2 No. 250.13-12,IP67,<br>approved<br>EAC TP TC 004<br>218.8K hrs min.<br>Telcordia SR-332(Bellcore) ; 60.2K hrs min. MIL-HDBK-217F (25<br>)<br>℃<br>280*144*48.5mm (L*W*H)<br>**ENVIRONMENT**<br>**SAFETY &**<br>**EMC**<br>**PROTECTION**<br>**SHORT CIRCUIT**<br>95%<br>95%<br>95%<br>95.5%<br>2800mA<br>649.6W<br>2800~3500mA<br>651W<br>649.6W<br>649.6W<br>4200mA<br>5600mA<br>11200mA<br>**EMC IMMUNITY**<br>**EMC EMISSION**<br>COLD START 40A(t<br>=1250 s measured at 50% I<br>) at 480VAC;<br>width<br>peak<br>Per NEMA 410<br>**TOTAL HARMONIC DISTORTION**<br>**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>I/P-O/P:4.2KVAC I/P-FG:2.1KVAC O/P-FG:1.5KVAC<br>I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃<br>**CONSTANT CURRENT REGION Note.2**<br>**PACKING**<br>3.9Kg;4pcs/16.6Kg/0.98CUFT<br>**NOTE**<br>**MAX. NO. of PSUs on 16A**<br>**CIRCUIT BREAKER**<br>2 unit(circuit breaker of type B) / 4 units(circuit breaker of type C) at 480VAC<br>Constant current limiting, recovers automatically after fault condition is removed<br>Shut down output voltage, re-power on to recovery<br>(Please refer to "STATIC CHARACTERISTIC" section)<br>180 ~ 528VAC 254VDC ~ 747VDC<br>92.8 ~ 232V<br>62 ~ 155V<br>46.4 ~ 116V<br>24 ~ 58V<br>**OPEN CIRCUIT VOLTAGE (max.)** 240V<br>240 ~ 259V<br>158 ~ 178V<br>118 ~ 136V<br>62 ~ 78V<br>Shut down output voltage, re-power on to recovery<br>160V<br>120V<br>70V<br>2100~5250mA<br>2800~7000mA<br>5600~14000mA<br>4200~5250mA<br>5600~7000mA<br>11200~14000mA<br>**TEMP. COEFFICIENT**<br>±<br>℃<br>℃<br>0.03%/<br>(0 ~ 55<br>)<br>**HVGC-650 -L-**<br>**HVGC-650 -M-**<br>**HVGC-650 -H-**<br>**HVGC-650 -U-**<br>μ<br>PF<br>0.9 / 230VAC, PF<br>0.9 / 277VAC<br>full load<br>≧<br>≧<br>≧<br>≧<br>≧<br>8<br>8<br>, PF<br>0.97 / 347VAC, PF<br>0.96 / 400VAC, PF<br>0.95 / 480VAC at<br>(Please refer to "<br>"<br>)<br>Power Factor Characteristic section<br>THD< 20% (@ load<br>50% at 230VAC/277VAC/347VAC/400VAC/480VAC input<br>≧<br>(Please refer to “TOTAL HARMONIC DISTORTION (THD)” section)<br>℃<br>℃<br>℃<br>℃<br>For any application note and IP water proof function installation caution, please refer our user manual before using.<br>https://www.meanwell.com/Upload/PDF/LED_EN.pdf<br>Compliance toEN55015, EN61000-3-2 Class C (<br>); EN61000-3-3, FCC Part 15 class B,<br>@ load<br>50%<br>EAC TP TC 020<br>≧<br>**WORKING TEMP.**<br>Tcase=-40 ~ +85<br>(Please refer to "OUTPUT LOAD vs TEMPERATURE" section)<br>℃<br>**MAX. CASE TEMP.**<br>Tcase=+85℃<br>**CURRENT RIPPLE**<br>5.0% max. @rated current<br>**CURRENT TOLERANCE**<br>±5%<br>**SET UP TIME**<br>**Note.4** 500ms/230VAC, 347VAC, 480VAC<br>**AUXILIARY POWER**<br>Nominal 12V (Tolerance:<br>10%, R&N:150mVp-p)@200mA for HVGC-650A only<br>±<br>~~GC~~<br>~~GC~~<br>~~eG~~<br>~~eG~~<br>a ~~GC~~<br>~~GC~~<br>a<br>a<br>aa<br>IeG<br>ee<br>a<br>~~RsaPO~~<br>~~ie~~<br>a<br>a~~ee~~<br>RR<br>a<br>a<br>a<br>rs<br>a<br>Re<br>a<br>RR~~ee~~<br>a<br>1. All parameters NOT specially mentioned are measured at347VAC input, rated current and 25 —_of ambient temperature.<br>2. Please refer to "DRIVING METHODS OF LED MODULE".<br>3. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.<br>4. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.<br>5. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the<br>complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.<br>6. This series meets the typical life expectancy of>50,000 hours of operation when Tcase, particularly tc point (orTMP, per DLC), is about 80 _ or less.<br>7. Please refer to the warranty statement on MEAN WELL's website at http:/Wwww.meanwell.com<br>8. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED driver can only be used behind a switch without permanently connected to<br>the mains.<br>9. The ambient temperature derating of 3.5<br>/1000m with fanless models and of<br>5<br>/1000m with fan models for operating altitude higher than 2000m(6500ft).<br>10.|**MODEL**<br>**RATED CURRENT**<br>**RATED POWER**<br>**FULL POWER CURRENT RANGE**<br>**OUTPUT**<br>**CURRENT ADJ. RANGE**<br>**VOLTAGE RANGE**<br>**Note.3**<br>**FREQUENCY RANGE**<br>**POWER FACTOR (Typ.)**<br>**EFFICIENCY (Typ.)**<br>**AC CURRENT (Typ.)**<br>**INPUT**<br>**INRUSH CURRENT(Typ.)**<br>**LEAKAGE CURRENT**<br>**SAFETY STANDARDS**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**OVER VOLTAGE**<br>**OVER TEMPERATURE**<br>1400~3500mA<br>47 ~ 63Hz<br>2.1A / 347VAC 1.5A / 480VAC<br><0.75mA / 480VAC<br>Compliance toEN61000-4-2,3,4,5,6,8,11, EN61547,light industry level (surge immunity Line-Earth 8KV, Line-Line 4KV),EAC TP TC 020<br>20 ~ 95% RH non-condensing<br>-40 ~ +80<br>, 10 ~ 95% RH non-condensing<br>℃<br>10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes<br>UL8750 (type”HL”),CSA C22.2 No. 250.13-12,IP67,<br>approved<br>EAC TP TC 004<br>218.8K hrs min.<br>Telcordia SR-332(Bellcore) ; 60.2K hrs min. MIL-HDBK-217F (25<br>)<br>℃<br>280*144*48.5mm (L*W*H)<br>**ENVIRONMENT**<br>**SAFETY &**<br>**EMC**<br>**PROTECTION**<br>**SHORT CIRCUIT**<br>95%<br>95%<br>95%<br>95.5%<br>2800mA<br>649.6W<br>2800~3500mA<br>651W<br>649.6W<br>649.6W<br>4200mA<br>5600mA<br>11200mA<br>**EMC IMMUNITY**<br>**EMC EMISSION**<br>COLD START 40A(t<br>=1250 s measured at 50% I<br>) at 480VAC;<br>width<br>peak<br>Per NEMA 410<br>**TOTAL HARMONIC DISTORTION**<br>**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>I/P-O/P:4.2KVAC I/P-FG:2.1KVAC O/P-FG:1.5KVAC<br>I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃<br>**CONSTANT CURRENT REGION Note.2**<br>**PACKING**<br>3.9Kg;4pcs/16.6Kg/0.98CUFT<br>**NOTE**<br>**MAX. NO. of PSUs on 16A**<br>**CIRCUIT BREAKER**<br>2 unit(circuit breaker of type B) / 4 units(circuit breaker of type C) at 480VAC<br>Constant current limiting, recovers automatically after fault condition is removed<br>Shut down output voltage, re-power on to recovery<br>(Please refer to "STATIC CHARACTERISTIC" section)<br>180 ~ 528VAC 254VDC ~ 747VDC<br>92.8 ~ 232V<br>62 ~ 155V<br>46.4 ~ 116V<br>24 ~ 58V<br>**OPEN CIRCUIT VOLTAGE (max.)** 240V<br>240 ~ 259V<br>158 ~ 178V<br>118 ~ 136V<br>62 ~ 78V<br>Shut down output voltage, re-power on to recovery<br>160V<br>120V<br>70V<br>2100~5250mA<br>2800~7000mA<br>5600~14000mA<br>4200~5250mA<br>5600~7000mA<br>11200~14000mA<br>**TEMP. COEFFICIENT**<br>±<br>℃<br>℃<br>0.03%/<br>(0 ~ 55<br>)<br>**HVGC-650 -L-**<br>**HVGC-650 -M-**<br>**HVGC-650 -H-**<br>**HVGC-650 -U-**<br>μ<br>PF<br>0.9 / 230VAC, PF<br>0.9 / 277VAC<br>full load<br>≧<br>≧<br>≧<br>≧<br>≧<br>8<br>8<br>, PF<br>0.97 / 347VAC, PF<br>0.96 / 400VAC, PF<br>0.95 / 480VAC at<br>(Please refer to "<br>"<br>)<br>Power Factor Characteristic section<br>THD< 20% (@ load<br>50% at 230VAC/277VAC/347VAC/400VAC/480VAC input<br>≧<br>(Please refer to “TOTAL HARMONIC DISTORTION (THD)” section)<br>℃<br>℃<br>℃<br>℃<br>For any application note and IP water proof function installation caution, please refer our user manual before using.<br>https://www.meanwell.com/Upload/PDF/LED_EN.pdf<br>Compliance toEN55015, EN61000-3-2 Class C (<br>); EN61000-3-3, FCC Part 15 class B,<br>@ load<br>50%<br>EAC TP TC 020<br>≧<br>**WORKING TEMP.**<br>Tcase=-40 ~ +85<br>(Please refer to "OUTPUT LOAD vs TEMPERATURE" section)<br>℃<br>**MAX. CASE TEMP.**<br>Tcase=+85℃<br>**CURRENT RIPPLE**<br>5.0% max. @rated current<br>**CURRENT TOLERANCE**<br>±5%<br>**SET UP TIME**<br>**Note.4** 500ms/230VAC, 347VAC, 480VAC<br>**AUXILIARY POWER**<br>Nominal 12V (Tolerance:<br>10%, R&N:150mVp-p)@200mA for HVGC-650A only<br>±<br>~~GC~~<br>~~GC~~<br>~~eG~~<br>~~eG~~<br>a ~~GC~~<br>~~GC~~<br>a<br>a<br>aa<br>IeG<br>ee<br>a<br>~~RsaPO~~<br>~~ie~~<br>a<br>a~~ee~~<br>RR<br>a<br>a<br>a<br>rs<br>a<br>Re<br>a<br>RR~~ee~~<br>a<br>1. All parameters NOT specially mentioned are measured at347VAC input, rated current and 25 —_of ambient temperature.<br>2. Please refer to "DRIVING METHODS OF LED MODULE".<br>3. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.<br>4. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.<br>5. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the<br>complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.<br>6. This series meets the typical life expectancy of>50,000 hours of operation when Tcase, particularly tc point (orTMP, per DLC), is about 80 _ or less.<br>7. Please refer to the warranty statement on MEAN WELL's website at http:/Wwww.meanwell.com<br>8. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED driver can only be used behind a switch without permanently connected to<br>the mains.<br>9. The ambient temperature derating of 3.5<br>/1000m with fanless models and of<br>5<br>/1000m with fan models for operating altitude higher than 2000m(6500ft).<br>10.|**HVGC-650 -L-**|**HVGC-650 -M-**|**HVGC-650 -H-**|**HVGC-650 -U-**|
|---|---|---|---|---|---|
||**RATED CURRENT**<br>~~GC~~|2800mA<br>~~GC~~|4200mA<br>~~GC~~|5600mA<br>~~GC~~|11200mA<br>~~GC~~|
||**RATED POWER**<br>~~GC~~<br>~~GC~~|649.6W<br>~~GC~~<br>~~GC~~|651W<br>~~GC~~<br>~~GC~~|649.6W<br>~~GC~~<br>~~GC~~|649.6W<br>~~GC~~<br>~~GC~~|
||**CONSTANT CURRENT REGION Note.2**<br>~~GC~~<br>~~eG~~|92.8 ~ 232V<br>~~GC~~<br>~~eG~~|62 ~ 155V<br>~~GC~~<br>~~eG~~|46.4 ~ 116V<br>~~GC~~<br>~~eG~~|24 ~ 58V<br>~~GC~~<br>~~eG~~|
||**FULL POWER CURRENT RANGE**<br>~~eG~~<br>~~eG~~|2800~3500mA<br>~~eG~~<br>~~eG~~|4200~5250mA<br>~~eG~~<br>~~eG~~|5600~7000mA<br>~~eG~~<br>~~eG~~|11200~14000mA<br>~~eG~~<br>~~eG~~|
||**OPEN CIRCUIT VOLTAGE (max.)** <br>~~eG~~<br>a|240V<br>~~eG~~<br>~~GC~~|160V<br>~~eG~~<br>~~GC~~|120V<br>~~eG~~<br>~~GC~~|70V<br>~~eG~~<br>~~GC~~|
||**CURRENT ADJ. RANGE**<br>a <br>~~GC~~<br>a|1400~3500mA<br> ~~GC~~<br>~~GC~~|2100~5250mA<br>~~GC~~<br>~~GC~~|2800~7000mA<br>~~GC~~<br>~~GC~~|5600~14000mA<br>~~GC~~<br>~~GC~~|
||**CURRENT RIPPLE**<br>~~GC~~<br>a|5.0% max. @rated current<br>~~GC~~||||
||**CURRENT TOLERANCE**<br>**AUXILIARY POWER**<br>a<br>a<br>aa|±5%<br>Nominal 12V (Tolerance:<br>10%, R&N:150mVp-p)@200mA for HVGC-650A only<br>±||||
||**SET UP TIME**<br>**Note.4** <br>aa|500ms/230VAC, 347VAC, 480VAC||||
||**VOLTAGE RANGE**<br>**Note.3**<br>a<br>I|(Please refer to "STATIC CHARACTERISTIC" section)<br>180 ~ 528VAC 254VDC ~ 747VDC<br>||||
||**FREQUENCY RANGE**<br>I|47 ~ 63Hz<br>||||
||**POWER FACTOR (Typ.)**<br>I|PF<br>0.9 / 230VAC, PF<br>0.9 / 277VAC<br>full load<br>≧<br>≧<br>≧<br>≧<br>≧<br>8<br>8<br>, PF<br>0.97 / 347VAC, PF<br>0.96 / 400VAC, PF<br>0.95 / 480VAC at<br>(Please refer to "<br>"<br>)<br>Power Factor Characteristic section<br>||||
||**TOTAL HARMONIC DISTORTION**<br>|THD< 20% (@ load<br>50% at 230VAC/277VAC/347VAC/400VAC/480VAC input<br>≧<br>(Please refer to “TOTAL HARMONIC DISTORTION (THD)” section)<br>||||
||**EFFICIENCY (Typ.)**<br>eG<br>ee|95%<br>eG|95%<br>eG|95%<br>eG|95.5%<br>eG|
||**AC CURRENT (Typ.)**<br>ee|2.1A / 347VAC 1.5A / 480VAC||||
||**INRUSH CURRENT(Typ.)**<br>ee|COLD START 40A(t<br>=1250 s measured at 50% I<br>) at 480VAC;<br>width<br>peak<br>Per NEMA 410<br>μ||||
||**MAX. NO. of PSUs on 16A**<br>**CIRCUIT BREAKER**|2 unit(circuit breaker of type B) / 4 units(circuit breaker of type C) at 480VAC||||
||**LEAKAGE CURRENT**<br>a<br>~~Rs~~|<0.75mA / 480VAC<br>~~a~~||||
||**SHORT CIRCUIT**<br>~~Rs~~|Constant current limiting, recovers automatically after fault condition is removed<br>~~a~~||||
||**OVER VOLTAGE**<br>~~Rs~~<br>~~ie~~|240 ~ 259V<br>158 ~ 178V<br>118 ~ 136V<br>62 ~ 78V<br>Shut down output voltage, re-power on to recovery<br>~~aPO~~||||
||**OVER TEMPERATURE**<br><br>~~ie~~<br>a|Shut down output voltage, re-power on to recovery<br>~~PO~~||||
||**WORKING TEMP.**<br><br>~~ie~~<br>a|Tcase=-40 ~ +85<br>(Please refer to "OUTPUT LOAD vs TEMPERATURE" section)<br>℃<br>~~PO~~||||
||**MAX. CASE TEMP.**<br>a<br>a|Tcase=+85℃<br>||||
||**WORKING HUMIDITY**<br>~~ee~~<br>RR|20 ~ 95% RH non-condensing<br>~~ee~~||||
||**STORAGE TEMP., HUMIDITY**<br>RR<br>a|-40 ~ +80<br>, 10 ~ 95% RH non-condensing<br>℃||||
||**TEMP. COEFFICIENT**<br>RR<br>a<br>a|±<br>℃<br>℃<br>0.03%/<br>(0 ~ 55<br>)||||
||**VIBRATION**<br>a|10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes||||
||**SAFETY STANDARDS**<br>a<br>a<br>rs|UL8750 (type”HL”),CSA C22.2 No. 250.13-12,IP67,<br>approved<br>EAC TP TC 004||||
||**WITHSTAND VOLTAGE**<br>rs|I/P-O/P:4.2KVAC I/P-FG:2.1KVAC O/P-FG:1.5KVAC||||
||**ISOLATION RESISTANCE**<br>rs<br>a<br>Re|I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃||||
||**EMC EMISSION**<br>Re<br>a|Compliance toEN55015, EN61000-3-2 Class C (<br>); EN61000-3-3, FCC Part 15 class B,<br>@ load<br>50%<br>EAC TP TC 020<br>≧||||
||**EMC IMMUNITY**<br>Re<br>a<br>RR|Compliance toEN61000-4-2,3,4,5,6,8,11, EN61547,light industry level (surge immunity Line-Earth 8KV, Line-Line 4KV),EAC TP TC 020<br>||||
||**MTBF**<br>a<br>RR|218.8K hrs min.<br>Telcordia SR-332(Bellcore) ; 60.2K hrs min. MIL-HDBK-217F (25<br>)<br>℃<br>||||
||**DIMENSION**<br>RR~~ee~~<br>a|280*144*48.5mm (L*W*H)<br>~~ee~~||||
||**PACKING**<br>a|3.9Kg;4pcs/16.6Kg/0.98CUFT||||
||℃<br>℃<br>℃<br>℃<br>For any application note and IP water proof function installation caution, please refer our user manual before using.<br>https://www.meanwell.com/Upload/PDF/LED_EN.pdf<br>a<br>1. All parameters NOT specially mentioned are measured at347VAC input, rated current and 25 —_of ambient temperature.<br>2. Please refer to "DRIVING METHODS OF LED MODULE".<br>3. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.<br>4. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.<br>5. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the<br>complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.<br>6. This series meets the typical life expectancy of>50,000 hours of operation when Tcase, particularly tc point (orTMP, per DLC), is about 80 _ or less.<br>7. Please refer to the warranty statement on MEAN WELL's website at http:/Wwww.meanwell.com<br>8. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED driver can only be used behind a switch without permanently connected to<br>the mains.<br>9. The ambient temperature derating of 3.5<br>/1000m with fanless models and of<br>5<br>/1000m with fan models for operating altitude higher than 2000m(6500ft).<br>10.|||||
ambient temperature derating of 3.5 ℃ /1000m with fanless models and of 5 ℃ /1000m with fan models for For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf
_File Name:HVGC-650-SPEC 2019-10-01_
## 650W Constant Power Mode LED Driver
## **HVGC - 650 series**
## **BLOCK DIAGRAM**
**==> picture [493 x 400] intentionally omitted <==**
**----- Start of picture text -----**<br>
PFC fosc : 45KHz<br>PWM fosc : 75KHz<br>EMI FILTER PFC POWER RECTIFIERS +V<br>I/P & CIRCUIT SWITCHING & -V<br>RECTIFIERS FILTER<br>DIM+<br>O.L.P.<br>DIM-<br>(AB Type)<br>FG O.L.P. PWM DETECTION<br>PFC CONTROL CIRCUIT<br>CONTROL<br>O.T.P.<br>O.V.P.<br>DRIVING METHODS OF LED MODULE<br>※ I-V Operating Area<br>◎ HVGC-650-L ◎ HVGC-650-M<br>260V 175V<br>168mA, 232V 1400mA, 232V 2800mA, 232V 252mA, 155V 2100mA, 155V 4200mA, 155V<br>230V 155V<br>200V 135V<br>3500mA, 185.6V 5250mA, 124V<br>170V 115V<br>140V 95V<br>168mA, 116V 2800mA, 116V 252mA, 77.5V 4200mA, 77.5V<br>110V 75V<br>80V 210mA, 92.8V 3500mA, 92.8V 55V 315mA, 62V 5250mA, 62V<br>0mA 400mA 800mA 1200mA 1600mA 2000mA 2400mA 2800mA 3200mA 3600mA 0mA 650mA 1300mA 1950mA 2600mA 3250mA 3900mA 4550mA 5200mA 5850mA<br>Recommended High Performance Region Allowed Operational Region Recommended High Performance Region Allowed Operational Region<br>**----- End of picture text -----**<br>
## ◎ **HVGC-650-H**
## ◎ **HVGC-650-U**
**==> picture [504 x 189] intentionally omitted <==**
**----- Start of picture text -----**<br>
130V 68V<br>336mA, 116V 2800mA, 116V 5600mA, 116V<br>115V 60V<br>11200mA, 58V<br>672mA, 58V 5600mA, 58V<br>100V 52V<br>7000mA, 92.8V<br>14000mA, 46.4V<br>85V 44V<br>70V 36V<br>336mA, 58V 5600mA, 58V 672mA, 29V 11200mA, 29V<br>55V 28V<br>40V 420mA, 46.4V 7000mA, 46.4V 20V 840mA, 23.2V 14000mA, 23.2V<br>0mA 800mA 1600mA 2400mA 3200mA 4000mA 4800mA 5600mA 6400mA 7200mA 0mA 1750mA 3500mA 5250mA 7000mA 8750mA 10500mA 12250mA 14000mA 15750mA<br>Recommended High Performance Region Allowed Operational Region Recommended High Performance Region Allowed Operational Region<br>**----- End of picture text -----**<br>
_File Name:HVGC-650-SPEC 2019-10-01_
**HVGC - 650 series**
650W Constant Power Mode LED Driver
## **DIMMING OPERATION**
**==> picture [486 x 651] intentionally omitted <==**
**----- Start of picture text -----**<br>
Vo+(Red)<br>FG (Green/Yellow) HVGC-650 Io Vo+(Red)<br>AC/L(Brown) ADJ. Vo-(Black)<br>AC/N(Blue) Vo-(Black)<br>DIM+(Blue)*<br>DIM-(White)**<br>* DIM+ for AB-Type<br>PROG+ for D2-Type<br>※ 3 in 1 dimming function (for Blank-Type) DA+ for DA-Type<br>�Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: * *DIM- for AB-TypePROG- for D2-Type<br>0 ~ 10VDC, or 10V PWM signal or resistance. DA- for DA-Type<br>�Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.<br>�Dimming source current from power supply: 100μA (typ.)<br>◎ Applying additive 0 ~ 10VDC 100%<br>90%<br>80%<br>+<br>+V + 70%<br>60%<br>-<br>-V - 50%<br>DIM+ 40%<br>+<br>Additive Voltage 30%<br>- 20%<br>DIM-<br>10%<br>“DO NOT connect "DIM- to -V" 0%<br>0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V<br>Dimming input: Additive voltage<br>◎ Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz): 100%<br>90%<br>80%<br>+<br>+V + 70%<br>60%<br>-<br>-V - 50%<br>DIM+ 40%<br>Additive PWM signal 30%<br>20%<br>DIM-<br>10%<br>“DO NOT connect "DIM- to -V" 0%<br>0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%<br>Duty cycle of additive 10V PWM signal dimming input<br>◎ Applying additive resistance: 100%<br>90%<br>+V + + 80%<br>70%<br>-<br>-V - 60%<br>DIM+ 50%<br>40%<br>Additive Resistance<br>30%<br>DIM- 20%<br>“DO NOT connect "DIM- to -V" 10%<br>0%<br>Short 10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N<br>(N=driver quantity for synchronized dimming operation)<br>Dimming input: Additive resistance<br>Note : 1. Min. dimming level is about 6% and the output current is not defined when 0%< Iout<6%.<br>2. The output current could drop down to 0% when dimming input is about 0kΩ or 0Vdc, or 10V PWM signal with 0% duty cycle.<br>Output current (%)<br>Output current (%)<br>Output current (%)<br>**----- End of picture text -----**<br>
_File Name:HVGC-650-SPEC 2019-10-01_
**HVGC - 650 series**
650W Constant Power Mode LED Driver
※ **Smart timer dimming function (for Dxx-Type by User definition)** MEAN WELL Smart timer dimming primarily provides the adaptive proportion dimming profile for the output constant current level to perform up to 14 consecutive hours. 3 dimming profiles hereunder are defined accounting for the most frequently seen applications. If other options may be needed, please contact MEAN WELL for details.
**==> picture [389 x 210] intentionally omitted <==**
**----- Start of picture text -----**<br>
Ex : ◎ D01-Type: the profile recommended for residential lighting<br>100<br>- |ft<br>- |ft<br>=| T1 T2<br>e{| ff<br>TIME** 06:00 07:00<br>a | fof<br>40 LEVEL** 100% 70%<br>30<br>20<br>10<br>a 02:00 04:00 06:00 08:00 10:00 12:00 14:00<br>Operating Time(HH:MM)<br>**: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level.<br>Example: If a residential lighting application adopts D01-Type, when turning on the power supply at 6:00pm, for instance:<br>Dimming Level(%)<br>**----- End of picture text -----**<br>
**==> picture [199 x 75] intentionally omitted <==**
**----- Start of picture text -----**<br>
Set up for D01-Type in Smart timer dimming software program:<br>T1 T2 T3 T4<br>TIME** 06:00 07:00 11:00 ---<br>LEVEL** 100% 70% 50% 70%<br>**----- End of picture text -----**<br>
- [1] The power supply will switch to the constant current level at 100% starting from 6:00pm.
- [2] The power supply will switch to the constant current level at 70% in turn, starting from 0:00am, which is 06:00 after the power supply turns on.
- [3] The power supply will switch to the constant current level at 50% in turn, starting from 1:00am, which is 07:00 after the power supply turns on.
- [4] The power supply will switch to the constant current level at 70% in turn, starting from 5:00am, which is 11:00 after the power supply turns on. The constant current level remains till 8:00am, which is 14:00 after the power supply turns on.
**==> picture [367 x 205] intentionally omitted <==**
**----- Start of picture text -----**<br>
Ex: ◎ D02-Type: the profile recommended for street lighting<br>100<br>90<br>60<br>70 T1 T2<br>60<br>TIME** 01:00 03:00<br>50<br>40 LEVEL** 50% 80%<br>30<br>20<br>10<br>a 02:00 O00 06:00 08:00 10:00 12:00 14:00<br>Operating Time(HH:MM)<br>**: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level.<br>Example: If a street lighting application adopts D02-Type, when turning on the power supply at 5:00pm, for instance:<br>Dimming Level(%)<br>**----- End of picture text -----**<br>
**==> picture [219 x 75] intentionally omitted <==**
**----- Start of picture text -----**<br>
Set up for D02-Type in Smart timer dimming software program:<br>T1 T2 T3 T4 T5<br>TIME** 01:00 03:00 8:00 11:00 ---<br>LEVEL** 50% 80% 100% 60% 80%<br>**----- End of picture text -----**<br>
- [1] The power supply will switch to the constant current level at 50% starting from 5:00pm.
- [2] The power supply will switch to the constant current level at 80% in turn, starting from 6:00pm, which is 01:00 after the power supply turns on.
- [3] The power supply will switch to the constant current level at 100% in turn, starting from 8:00pm, which is 03:00 after the power supply turns on.
- [4] The power supply will switch to the constant current level at 60% in turn, starting from 1:00am, which is 08:00 after the power supply turns on.
- [5] The power supply will switch to the constant current level at 80% in turn, starting from 4:00am, which is 11:00 after the power supply turns on. The constant current level remains till 6:30am, which is 14:00 after the power supply turns on.
_File Name:HVGC-650-SPEC 2019-10-01_
**HVGC - 650 series**
650W Constant Power Mode LED Driver
**==> picture [194 x 114] intentionally omitted <==**
**----- Start of picture text -----**<br>
Ex: ◎ D03-Type: the profile recommended for tunnel lighting<br>100|<br>x<br>70<br>60<br>50<br>40<br>30<br>Dimming Level(%)<br>**----- End of picture text -----**<br>
||T1|T2|T3|T4|
|---|---|---|---|---|
|TIME**|18:00|20:00|24:00|04:00|
|LEVEL**|100%|75%|50%|25%|
Operating Time(HH:MM)
**: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level. Example: If a tunnel lighting application adopts D03-Type, when turning on the power supply at 4:30pm, for instance: [1] The power supply will switch to the constant current level at 70% starting from 4:30pm. [2] The power supply will switch to the constant current level at 100% in turn, starting from 6:00pm, which is 01:30 after the power supply turns on. [3] The power supply will switch to the constant current level at 70% in turn, starting from 5:00am, which is 11:00 after the power supply turns on. The constant current level remains till 6:30am, which is 14:00 after the power supply turns on.
## ※ **DALI interface(primary side; for DA-Type)**
Apply DALI signal between DA+ and DA-. DALI protocol comprises 16 groups and 64 addresses. First step is fixed at 6% of output.
_File Name:HVGC-650-SPEC 2019-10-01_
**HVGC - 650 series**
## 650W Constant Power Mode LED Driver
## **OUTPUT LOAD vs TEMPERATURE**
**==> picture [493 x 371] intentionally omitted <==**
**----- Start of picture text -----**<br>
100 100<br>80 200VAC 80<br>230VAC<br>60 60<br>Above 277VAC<br>40 40<br>20 20<br>-40 -25 -10 0 15 30 45 50 55 60 65 (HORIZONTAL) -40 -25 0 20 45 55 65 75 85 (HORIZONTAL)<br>AMBIENT TEMPERATURE,Ta ( ℃ ) Tcase ( ℃ )<br>If HVGC-650 operates in Constant Power mode with the rated<br>current, the maximum workable Ta is 50℃(Typ. 230VAC)<br>STATIC CHARACTERISTIC POWER FACTOR (PF) CHARACTERISTIC<br>※ Tcase at 80℃<br>100 1.00<br>0.95<br>90<br>0.90<br>80 0.85<br>0.80<br>70 480VAC<br>0.75<br>400VAC<br>60 0.70<br>347VAC<br>0.65<br>50 0.60 277VAC<br>40 0.55 230VAC<br>0.50<br>10% 20% 30% 40% 50% 60% 70% 80% 90% 100%<br>180 200 347 440 480 528 (650W)<br>LOAD<br>INPUT VOLTAGE (V) 60Hz<br>LOAD (%) LOAD (%)<br>PF<br>LOAD (%)<br>**----- End of picture text -----**<br>
## **TOTAL HARMONIC DISTORTION (THD)**
## **EFFICIENCY vs LOAD**
**==> picture [232 x 30] intentionally omitted <==**
**----- Start of picture text -----**<br>
HVGC-650 series possess superior working efficiency that up to 95% can<br>be reached in field applications.<br>※ L Model, Tcase at 80℃ L Model, Tcase at 80℃℃<br>**----- End of picture text -----**<br>
**==> picture [495 x 179] intentionally omitted <==**
**----- Start of picture text -----**<br>
※ L Model, Tcase at 80℃ be reached in field applications.<br>※ L Model, Tcase at 80℃ L Model, Tcase at 80℃℃<br>50 100<br>45<br>95<br>40 E<br>35 90<br>30 480VAC 85 480VAC<br>25 400VAC<br>400VAC<br>20 80 347VAC<br>347VAC<br>15 277VAC 75 277VAC<br>10 230VAC<br>5 230VAC 70<br>0 65<br>10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%<br>LOAD LOAD<br>THD(%)<br>EFFICIENCY(%)<br>**----- End of picture text -----**<br>
_File Name:HVGC-650-SPEC 2019-10-01_
**HVGC - 650 series**
650W Constant Power Mode LED Driver
## **LIFE TIME**
**==> picture [296 x 217] intentionally omitted <==**
**----- Start of picture text -----**<br>
120<br>100<br>80<br>60<br>40<br>20<br>0<br>20 25 30 35 40 45 50 55 60 65 70 75 80 85<br>Tcase ( ℃ )<br>LIFETIME(Kh)<br>**----- End of picture text -----**<br>
## **MECHANICAL SPECIFICATION**
## **Cable information**
|**Type**|**Input cable**|**Output cable**|**Dimming cable**|**AUX cable**|
|---|---|---|---|---|
|AB|SOOW 17AWG<br>3C /<br>×<br>H07RN-F 3G 1.0mm<br>2|**U type:**<br>SJOW 17AWG<br>4C /<br>×<br>H05RN-F<br>**L/M/H type:**<br>SJOW 17AWG<br>2C /<br>×<br>H05RN-F|SJOW 17AWG<br>2C /<br>×<br>H05RN-F|SJOW 17AWG<br>2C /<br>×<br>H05RN-F|
|D2|SOOW 17AWG<br>3C /<br>×<br>H07RN-F 3G 1.0mm<br>2|**U type:**<br>SJOW 17AWG<br>4C /<br>×<br>H05RN-F<br>**L/M/H type:**<br>SJOW 17AWG<br>2C /<br>×<br>H05RN-F|SJOW 17AWG<br>2C /<br>×<br>H05RN-F|SJOW 17AWG<br>2C /<br>×<br>H05RN-F|
|Dx|SOOW 17AWG<br>3C /<br>×<br>H07RN-F 3G 1.0mm<br>2|**U type:**<br>SJOW 17AWG<br>4C /<br>×<br>H05RN-F<br>**L/M/H type:**<br>SJOW 17AWG<br>2C /<br>×<br>H05RN-F|------|SJOW 17AWG<br>2C /<br>×<br>H05RN-F|
|DA|SOOW 17AWG<br>3C /<br>×<br>H07RN-F 3G 1.0mm<br>2|**U type:**<br>SJOW 17AWG<br>4C /<br>×<br>H05RN-F<br>**L/M/H type:**<br>SJOW 17AWG<br>2C /<br>×<br>H05RN-F|SJOW 17AWG<br>2C /<br>×<br>H05RN-F|SJOW 17AWG<br>2C /<br>×<br>H05RN-F|
_File Name:HVGC-650-SPEC 2019-10-01_
## 650W Constant Power Mode LED Driver
## **HVGC - 650 series**
**==> picture [511 x 668] intentionally omitted <==**
**----- Start of picture text -----**<br>
Case No. 228 Unit:mm<br>※ HVGC-650 - -<br>= U type 280<br>= AB/D2/DA types 13.4 253.2<br>8.9<br>ψ4.5×4PL<br>300±20 126.6 300±20 Vo+(Red)<br>FG (Green/Yellow) T case tc Io Vo+(Red)<br>AC/L(Brown) ADJ. Vo-(Black)<br>AC/N(Blue) SOOW 17AWG×3C / H07RN-F 3G 1.0mm2 SJOW 17AWG×4C / H05RN-F 1.0mm2 Vo-(Black)<br>DIM+/PROG+/DA+(Blue)<br>SJOW 17AWG×2C / H05RN-F 1.0mm2 DIM-/PROG-/DA-(White)<br>�tc : Max. Case Temperature<br>※ HVGC-650 - -<br>= L/M/H type 280<br>= AB/D2/DA types 13.4 253.2<br>8.9<br>ψ4.5×4PL<br>300±20 126.6 300±20<br>AC/L(Brown)FG (Green/Yellow) T case tc ADJ.Io Vo+(Red)<br>AC/N(Blue) SOOW 17AWG×3C / H07RN-F 3G 1.0mm2 SJOW 17AWG×2C / H05RN-F 1.0mm2 Vo-(Black)<br>DIM+/PROG+/DA+(Blue)<br>SJOW 17AWG×2C / H05RN-F 1.0mm2 DIM-/PROG-/DA-(White)<br>�tc : Max. Case Temperature<br>48.5<br>48.5<br>15<br>97 144<br>15<br>15<br>97 144<br>15<br>47<br>47<br>**----- End of picture text -----**<br>
_File Name:HVGC-650-SPEC 2019-10-01_
## 650W Constant Power Mode LED Driver
## **HVGC - 650 series**
**==> picture [506 x 594] intentionally omitted <==**
**----- Start of picture text -----**<br>
Unit:mm<br>※ HVGC-650A - - with auxiliary power optional<br>= U type 280<br>= AB/D2/DA types 13.4 253.2<br>8.9<br>ψ4.5×4PL<br>300±20<br>AUX+(Gray)<br>FG (Green/Yellow) 300±20 T case tc 126.6Io SJOW 17AWG×2C / H05RN-F 1.0mm2 AUX-(Black)Vo+(Red)<br>AC/L(Brown) ADJ. Vo+(Red)<br>AC/N(Blue) SOOW 17AWG×3C / H07RN-F 3G 1.0mm2 SJOW 17AWG×4C / H05RN-F 1.0mm2 Vo-(Black)Vo-(Black)<br>DIM+/PROG+/DA+(Blue)<br>SJOW 17AWG×2C / H05RN-F 1.0mm2 DIM-/PROG-/DA-(White)<br>�tc : Max. Case Temperature<br>※ HVGC-650A - - with auxiliary power optional<br>= L/M/H type 280<br>= AB/D2/DA types 13.4 253.2<br>8.9<br>ψ4.5×4PL<br>300±20<br>AUX+(Gray)<br>AC/L(Brown)FG (Green/Yellow) 300±20 T case tc 126.6ADJ.Io SJOW 17AWG×2C / H05RN-F 1.0mm2 Vo+(Red)AUX-(Black)<br>AC/N(Blue) SOOW 17AWG×3C / H07RN-F 3G 1.0mm2 SJOW 17AWG×2C / H05RN-F 1.0mm2 Vo-(Black)<br>DIM+/PROG+/DA+(Blue)<br>SJOW 17AWG×2C / H05RN-F 1.0mm2 DIM-/PROG-/DA-(White)<br>�tc : Max. Case Temperature<br>INSTALLATION MANUAL<br>48.5<br>48.5<br>15<br>97 144<br>15<br>15<br>97 144<br>15<br>47<br>47<br>**----- End of picture text -----**<br>
Please refer to : http://www.meanwell.com/manual.html
_File Name:HVGC-650-SPEC 2019-10-01_
Updated at April 17, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →