HS103DR-D53TP25D

## **HS103DR Series Assemblies** 

- 55 amp AC output @ 40°C 

- Single Channel or 3 Phase output 

- 3 to 32 VDC input control voltage 

- DIN Rail mounted 

- UL, CSA, VDE, CE approved SSRs 

## **PRODUCT SELECTION** 

|**Description**|**55 A**|**55 A**|**55 A**|
|---|---|---|---|
|3-32 VDC Control|HS103DR-D2490|HS103DR-HD6090|HS103DR-D53TP25D|
|**OUTPUT SPECIFICATIONS (1)**||||
|**Description**|**HS103DR-D2490**|**HS103DR-HD6090**|**HS103DR-D53TP25D**|
|Operating Voltage (47-63Hz) [Vrms]|24-280|48-660|48-530|
|Transient Overvoltage [Vpk]|600|1200|1200|
|Maximum Off-State Leakage Current @ Rated Voltage [mArms]|10|10|10|
|Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2)|500|500|500|
|Maximum Load Current [Arms]|55|55|55|
|Minimum Load Current [Arms]|0.04|0.04|0.05|
|Maximum Surge Current (16.6ms) [Apk]|1200|1200|250|
|Maximum On-State Voltage Drop @ Rated Current [Vpk]|1.6|1.7|1.6|
|Maximum I²t for Fusing (8.3 msec) [A²sec]|6000|6000|260|
|Minimum Power Factor (with Maximum Load)|0.5|0.5|0.5|



## **OUTPUT SPECIFICATIONS (1)** 

## **INPUT SPECIFICATIONS (1)** 

|**Description**|**HS103DR-D2490**|**HS103DR-HD6090**|**HS103DR-D53TP25D**|
|---|---|---|---|
|Control Voltage Range|3-32 VDC|3-32 VDC|3-32 VDC|
|Minimum Turn-On Voltage|3.0 VDC|3.0 VDC|3.0 VDC|
|Minimum Turn-Off  Voltage|1.0 VDC|1.0 VDC|1.0 VDC|
|Maximum Reverse Voltage|32 VDC|32 VDC|32 VDC|
|Typical Input Current|3.4 mA @ 5 VDC|2.0 mA (3)|10 mA @ 5 VDC|
|Nominal Input Impeadance|1500 Ohms|(3)|450 Ohms|
|Maximum Turn-On Time [msec]|1/2 Cycle|1/2 Cycle|1/2 Cycle|
|Maximum Turn-Off Time [msec]|1/2 Cycle|1/2 Cycle|1/2 Cycle|



## **GENERAL SPECIFICATIONS** 

|**Description**|**HS103DR-Dxx90**|**HS103DR-D53TP25D**|
|---|---|---|
|Dielectric Strength, Input/Output/Base (50/60Hz)|4000 Vrms|4000 Vrms|
|Minimum Insulation Resistance(@500 V DC)|109Ohms|109Ohms|
|Maximum Capacitance, Input/Output|8 pF|10 pF|
|Ambient Operating Temperature Range|-40 to 80˚C|-40 to 80°C|
|Ambient Storage Temperature Range|-40 to 125˚C|-40 to 125°C|
|Status Indicator Display|None|None|
|Weight (typical)|1.39 lb. (631g)|1.84 lb (859g)|
|Encapsulation|Themally Conductive Epoxy|Themally Conductive Epoxy|
|Recommended Terminal Screw Torque Range:|6-32 Screws - 10 in/lbs. 8-32 Screws - 20 in/lbs.|6-32 Screws - 10 in/lbs. 8-32 Screws - 20 in/lbs.|
||(Screws drywithout grease)|(Screws drywithout grease)|
|Thermal pad installed|Yes|Yes|



## **GENERAL NOTES** 

- 1) All parameters at 25°C unless otherwise specified. 

2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 

3) Input circuitry for DC control version incorporates active current limiter (HD  model only) 

## **MECHANICAL SPECIFICATIONS** 

## **THERMAL DERATE INFORMATION** 

## **AGENCY APPROVALS** 

Designed in accordance with the requirements of IEC 62314 Agency approvals are for relay only. 

E116949 (D2490) E116950 (HD6090, D53TP25D) LR81689 (all) 

10143 UG (D2490, HD6090) VDE 5941 UG (D53TP25D) 

Rev. 110811 

**==> picture [529 x 353] intentionally omitted <==**

**----- Start of picture text -----**<br>
crydom ” DIN Rail Mount<br>A DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / PERIGO<br>HAZARD OF RIESGO DE RISQUE DE GEFAHR EINES RISCHIO DI RISCO DE<br>ELECTRIC DESCARGA DESCHARGE ELEKTRISCHE SCOSSA DESCARGA i<br>SHOCK, ELECTRICA O ELECTRIQUE N SCHLAGES ELETTRICA O ELETTRICA OU H<br>EXPLOSION, EXPLOSION. OU EXPLOSION ODER EINER DELL’ESPLOSI EXPLOSAO H<br>OR ARC FLASH. * Desconectar « Eteindre EXPLOSION. ONE. « Desconectar<br>« Disconnect all todos los toutes les « Stellen Sie « Spenga tutta 0 equipamento H<br>power before suministros de sources Jeglichen 'alimentazion de toda a i<br>installing or energia a este d'énergie de Strom ab, der e che fornisce energia antes<br>working with equipo antes cet appareil dieses Gerat questa de instalar ou<br>this equipment. de trabajar avant de versorgt, bevor apparecchiatu trabalhar com |<br>J . con este equipo. travailler Sie an dem ra prima del este equipamen |<br>= Veifeared dessus de cet Gerat Arbeiten lavorare a questa to<br>connectionsand replace all « lasVerificar conexionestodas appareilia " * durchfihrenVor der apparecchiatui ra e Verificar todas<br>covers before y colocar todas « Vérifier tous Inbetriebnahme « Verificare tutti as conexées e |<br>tuming on las tapas antes connections, et alle Anschilisse i collegamenti recolocar todas |<br>power. de energizer remettre tous liberpriifen und e sostituire as tampas |<br>Failure el equipo. couverts en alle Gehauseteile tutte le coperture antes de religar |<br>eI meme sous a<br>instruinstructionstionsto followwi will incumplimiento olace avant de montieren. sull'alimentaziprima della  one oequipamentoi ||<br>result in death de estas De non-suivi de S nfo araias |<br>or serious injury. instrucciones ces instructions Unterlassung L'omissione di estas instrugdes |<br>puede provoquera la di seguire queste pode levar 4 morte<br>la muerte provocar o mort ou des Anweisungeneter =istruz aeioni ou lesées sérias z<br>lesiones serias. lésions sérieuses kénnen zum provochera la<br>sérieuses. Tode oder zu morte o di<br>schweren lesioni serie<br>Verletzungen<br>fiihren.<br>**----- End of picture text -----**<br>


A WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA/ AVVERTENZA/ AVISO RISK OF MATERIAL DAMAGE AND HOT RISQUE DE DOMMAGE MATERIEL ET DE GEFAHR VON MATERIALSCHADEN UND ENCLOSURE SURCHAUFFE DU BOITIER GEHAUSEERHITZUNG + The product's side panels may be hot, allow * Les panneaux latéraux du produit peuvent étre * Die Seitenwande kénnen heif§ sein. Lassen Sie the product to cool before touching. chauds. Laisser le produit refroidir avant de le das Produkt abkiihlen, bevor Sie es berihren. * Follow proper mounting instructions including | toucher. * Beachten Sie die Montageanweisungen, torque values. * Respecter les consignes de montage, et * Fulhren Sie keine Fitissigkeiten oder * Do not allow liquids orforeign objects to enter | "otamment les couples de serrage._ Fremdkérper in das Produkt ein. this product. * Ne pas laisser péneétrer de liquide ni de corps étrangers a l'intérieur du produit. : : ‘ . | Le non-respect de cette directive peut entrainer, Die Nichtbeachtung dieser Anweisung kann pineal pinnae Soak sane “a7 result in| des lésions corporelles graves ou des Kérperverletzung oder Materialschaden jury, or equip ge. dommages matériels. zur Folge haben. RIESGO DE DANOS MATERIALES Y DE : RISCO DE DANO MATERIAL E DE AQUECIMENTO SOBRECALENTAMIENTO DE LA UNIDAD Spal DE DARNEMATERIALE DINVORMERO * Os paineéis laterais do produto podem estar * Los paneles laterales de! producto pueden *| pannelli laterali dell'apparecchio possono quentes; dé tempo ao produto para arrefecer over calentes. Esperar que el producto se scottare; lasciar quindi raffreddare il prodotto antes de lhe tocar. i enfrie antes de tocarlo. . prima di toccarlo. * Siga devidamente as instrugdes de montagem. aaa “ie mst ucciones de me niaye: yen * Seguire le istruzioni di montaggio corrette. * Nao permita a entrada de liquidos e de objectos * particu ar oe pares cle aprelado. * Non far entrare liquidi o oggetti estranei in questo estranhos no produto. No dejar que penetren liquidos 0 cuerpos apparecchio extrafos en el producto. : producirse graves lesiones, dafios materiales. | qannj alle apparecchiature. danos materais. 

ed A brand of Do not forget to visit us at: www.crydom.com F Copyright © 2012 Crydom Inc. Specifications subject to change without notice. 

## **ANNEX - ENVIROMENTAL INFORMATION**