HM72E-06R47LFTR13

Make Possible @ Electronics 

## **Magnetics** 

## **High Power High Performance Molded Surface Mount Inductors** 

## **Model HM72E-06** 

## Features and Benefits 

- Operating Temperature Range -40°C to +155°C 

- Temperature Rise, Maximum 50°C Operating Frequency Up to 3MHz RoHS Compliant 

## Specifications @ 25°C 

|**Part Number**|**(1)**<br>**μH±20%**<br>**Inductance**|**Heating**<br>**Current(2)**<br>**(Adc)**|**(3)**<br>**(Adc)**<br>**Isat**|**DCR (mΩ)**|**DCR (mΩ)**|
|---|---|---|---|---|---|
|||||**Typ.**|**Max.**|
|HM72E-06R10LF|0.10|26.2|45.0|1.5|1.7|
|HM72E-06R20LF<br>~~a~~|0.20<br>|20.3<br>|34.0<br>|2.5<br>|2.8<br>|
|HM72E-06R33LF<br>~~aGG~~|0.33<br>~~GG~~|18.0<br>~~GG~~|22.0<br>~~GG~~|3.2<br>~~GG~~|3.9<br>~~GG~~|
|HM72E-06R47LF<br>~~a~~|0.47<br>|16.1<br>|19.0<br>|4.0<br>|4.2<br>|
|HM72E-06R68LF<br>~~aGG~~|0.68<br>~~GG~~|14.4<br>~~GG~~|16.5<br>~~GG~~|5.0<br>~~GG~~|5.5<br>~~GG~~|
|HM72E-061R0LF<br>~~GG~~|1.00<br>~~GG~~|10.3<br>~~GG~~|15.0<br>~~GG~~|9.0<br>~~GG~~|10.0<br>~~GG~~|
|HM72E-061R5LF<br>~~a~~|1.50<br>|8.4<br>|10.0<br>|13.0<br>|14.0<br>|
|HM72E-062R2LF<br>~~aGG~~|2.20<br>~~GG~~|8.3<br>~~GG~~|8.5<br>~~GG~~|18.0<br>~~GG~~|20.0<br>~~GG~~|
|HM72E-063R3LF<br>~~a~~|3.30<br>|6.6<br>|8.0<br>|26.5<br>|30.0<br>|
|HM72E-064R7LF<br>~~aGG~~|4.70<br>~~GG~~|5.4<br>~~GG~~|6.5<br>~~GG~~|39.0<br>~~GG~~|42.0<br>~~GG~~|
|HM72E-066R8LF<br>~~a~~|6.80<br>|4.1<br>|5.0<br>|62.0<br><br>~~OO~~|68.0<br><br>~~OO~~|
|HM72E-068R2LF<br>~~aGG~~|8.20<br>~~GG~~|3.5<br>~~GG~~|4.2<br>~~GG~~|80.0<br>~~GG~~<br>~~OO~~|100.0<br>~~GG~~<br>~~OO~~|
|HM72E-06100LF<br>~~QO~~|10.0<br>~~QO~~|3.2<br>~~QO~~|4.0<br>~~QO~~|100.0<br>~~OO~~<br>~~QO~~|105.0<br>~~OO~~<br>~~QO~~|
|HM72E-06330LF|33.0|1.8|2.5|302.0|332.0|



Notes:    (1)  Inductance is measured at 100 kHz, 0.1Vac without DC current. 

(2)  The Heating Current is the approximate DC current which causes the component temperature to increase by 50°C. This current is determined by soldering the component on a typical application PCB, and then applying the current to the device for 30 minutes. 

(3)  The saturation current (Isat) is the approximate current at which the inductance will be decreased by 20% typical from its initial (zero DC) value. (4)  The part temperature (ambient + temperature rise) should not exceed 155°C. 

## Mechanical Outline Dimensions (mm) 

## General Note 

TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. 

www.ttelectronicsmagnetics.com 

© TT Electronics plc 

Rev. 02 

Electronics Make Possible e 

**High Power High Performance Molded Surface Mount Inductors** 

**Model HM72E-06** 

## Electrical Characteristic @ 25°C 

## Packing / Ordering Information 

**==> picture [386 x 187] intentionally omitted <==**

**----- Start of picture text -----**<br>
One reel (13”) 2000 pcs<br>One shipping carton (6 reels) 12000 pcs<br>HM72E  -  06 R33 LF TR13<br>Model<br>Series 13” tape & reel packing<br>Case  Lead Free<br>Size:<br>Inductance Code:<br>First 2 digits are significant. Last digit<br>denotes number of trailing zeros. For<br>values below 10μH, “R” denotes the<br>decimal point.<br>**----- End of picture text -----**<br>


General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. 

www.ttelectronicsmagnetics.com 

© TT Electronics plc 

Rev. 02