Image not available
Illustrative purposes only
HLG-600H-24B
LED Driver, 600 W, 24 VDC, 25 A, Constant Current, Constant Voltage, 90 V
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: MEAN WELL
- Product type: AC / DC LED Power Supplies
- Output Power Max:600W; Output Voltage Max:24V; Output Current:25A; LED Driver Mode:Constant Current, Constant Voltage; Input Voltage Min:90V; Input Voltage Max:305V; Product Range:HLG-600
- SVHC: No SVHC (25-Jun-2025)
- Product Range: HLG-600H
- Output Current: 25A
- LED Driver Mode: Constant Current, Constant Voltage
- Output Power Max: 600W
- Input Voltage Max: 305V
- Input Voltage Min: 90V
- Output Voltage Max: 24VDC
- Power Supply Applications: -
| Delivery and price | |
|---|---|
| Units per pack | 5 |
| Price | 194.82 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
**HLG - 600H series** 600W Constant Voltage + Constant Current LED Driver **==> picture [214 x 53] intentionally omitted <==** **----- Start of picture text -----**<br> tawan (6) ©) \7 V7 WW WW( for 24A,36A,48A,54A only IG )sew<br>■<br>**----- End of picture text -----**<br> **==> picture [57 x 10] intentionally omitted <==** **----- Start of picture text -----**<br> IP65 IP67<br>**----- End of picture text -----**<br> **==> picture [13 x 11] intentionally omitted <==** **----- Start of picture text -----**<br> ■<br>**----- End of picture text -----**<br> Metal housing with class I design Standby power consumption <0.5W at remote off • Ⅰ ## ■ current output. HLG-600H operates from 90～305VAC and offers models with different rated voltage ranging between 12V and 54V. Thanks to the high efficiency up to 96%, with the fanless design, the entire series is able to operate for -40℃ ~ +90℃ case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. HLG-600H is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system. **==> picture [13 x 10] intentionally omitted <==** **----- Start of picture text -----**<br> ■<br>**----- End of picture text -----**<br> **==> picture [424 x 75] intentionally omitted <==** **----- Start of picture text -----**<br> IPLevel | Function<br>I<br>B<br>IP6 57 | 3ino and1 dimming Vo adjustablefunction through(0~10VDC,built-in10V potentiometer PWM signal and resistance)<br>I<br>AB IP65 3oinand1 dimming Vo adjustablefunctionthrough(0~10VDC,10Vbuilt-in potentiometerPWM signal&and resistance)<br>IP67 I o and Vo fixed<br>**----- End of picture text -----**<br> _File Name:HLG-600H-SPEC 2018-09-18_ > 600W Constant Voltage + Constant Current LED Driver **HLG - 600H series** ## **SPECIFICATION** |**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC<br>I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃<br>Compliance to<br>Class B, EN55015, EN61000-3-2 Class C (<br>) ; EN61000-3-3,<br>;<br>EN55032 (CISPR32)<br>@ load<br>50%<br>EAC TP TC 020<br>≧<br>KC KN15, KN61547(for<br>)<br>24A,36A,48A,54A only<br>Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (<br>),<br>surge immunity Line-Earth 4KV, Line-Line 2KV<br>EAC TP TC 020 KC KN15, KN61547<br>;<br>(for<br>)<br>24A,36A,48A,54A only<br>**CONSTANT CURRENT REGION Note.4**<br>**MODEL**<br>**DC VOLTAGE**<br>**RATED CURRENT**<br>**RATED POWER**<br>**OUTPUT**<br>**VOLTAGE ADJ. RANGE**<br>**CURRENT ADJ. RANGE**<br>**LINE REGULATION**<br>**LOAD REGULATION**<br>**SETUP, RISE TIME**<br>**Note.6**<br>**HOLD UP TIME (Typ.)**<br>**VOLTAGE RANGE**<br>**Note.5**<br>**FREQUENCY RANGE**<br>**POWER FACTOR (Typ.)**<br>**EFFICIENCY**<br>**(Typ.)**<br>**AC CURRENT (Typ.)**<br>**INPUT**<br>**INRUSH CURRENT(Typ.)**<br>**LEAKAGE CURRENT**<br>**STANDBY POWER CONSUMPTION**<br>**SAFETY STANDARDS**<br>**Note.7**<br>**WORKING TEMP.**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**TEMP. COEFFICIENT**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**OVER CURRENT**<br>**Note.4**<br>**OVER VOLTAGE**<br>**OVER TEMPERATURE**<br>Adjustable for A-Type only (via built-in potentiometer)<br>Adjustable for A-Type only (via built-in potentiometer)<br>500ms, 80ms/ 115VAC, 230VAC<br>15ms/ 115VAC, 230VAC<br>90 ~ 305VAC 127 ~ 431VDC<br>(Please refer to "STATIC CHARACTERISTIC" section)<br>47 ~ 63Hz<br>7A / 115VAC 3.3A / 230VAC 2.9A / 277VAC<br><0.75mA / 277VAC<br><0.5W at remote off<br>95 ~ 108%<br>Constant current limiting, recovers automatically after fault condition is removed<br>20 ~ 95% RH non-condensing<br>-40 ~ +85<br>, 10 ~ 95% RH non-condensing<br>℃<br>±<br>℃<br>℃<br>0.03%/<br>(0 ~ 55<br>)<br>10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes<br>UL60950-1, UL8750(type”HL”), CSA C22.2 No. 250.13-12, ENEC EN61347-1, EN61347-2-13 independent, EN62384,<br>IP65 or IP67, J61347-1, J61347-2-13, CCC GB4943.1, EAC TP TC 004,<br>,<br>AS/NZS 60950.1(by CB)<br>KC KN61347-1, KN61347-2-13<br>24A,36A,48A,54A only<br>(for<br>) approved<br>76.9K hrs min. MIL-HDBK-217F (25<br>)<br>℃<br>280*144*48.5mm (L*W*H)<br>Shut down o/p voltage, re-power on to recover<br>Shut down o/p voltage, re-power on to recover<br>**RIPPLE & NOISE (max.) Note.2**<br>**VOLTAGE TOLERANCE Note.3**<br>**ENVIRONMENT**<br>**SAFETY &**<br>**EMC**<br>**(Note 10)**<br>**PROTECTION SHORT CIRCUIT**<br>Constant current limiting, recovers automatically after fault condition is removed<br>13 ~ 16V<br>16.5 ~ 20.5V 22 ~ 26V<br>26 ~ 30V<br>32.5 ~ 36.5V 39.5 ~ 43.5V<br>52.5 ~ 56.5V<br>46 ~ 50V<br>59 ~ 63V<br>92%<br>92.5%<br>93.5%<br>93.5%<br>94.5%<br>94.5%<br>95%<br>95%<br>95%<br>95%<br>95.5%<br>95.5%<br>96%<br>96%<br>96%<br>96%<br>96%<br>96%<br>±3.0%<br>20 ~ 40A<br>±2.0%<br>18 ~ 36A<br>±1.5%<br>14 ~ 28A<br>±1.0%<br>12.5 ~ 25A<br>±1.0%<br>10 ~ 20A<br>±1.0%<br>8.3 ~ 16.7A<br>±1.0%<br>6.2 ~ 12.5A<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±2.0%<br>±1.5%<br>±1.0%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±1.0%<br>5.6 ~ 11.2A<br>±0.5%<br>±0.5%<br>±1.0%<br>7.1 ~ 14.3A<br>±0.5%<br>±0.5%<br>12V<br>6 ~12V<br>15V<br>7.5 ~ 15V<br>20V<br>10 ~ 20V<br>24V<br>12 ~ 24V<br>30V<br>15 ~ 30V<br>36V<br>18 ~ 36V<br>48V<br>24 ~ 48V<br>40A<br>36A<br>28A<br>25A<br>20A<br>16.7A<br>12.5A<br>480W<br>540W<br>560W<br>600W<br>600W<br>601.2W<br>600W<br>150mVp-p<br>150mVp-p<br>12.7 ~ 15.8V<br>150mVp-p<br>17 ~ 21V<br>150mVp-p<br>20.4 ~ 25.2V<br>200mVp-p<br>25.5 ~ 31.5V<br>250mVp-p<br>30.6 ~ 37.8V<br>250mVp-p<br>40.8 ~ 50.4V<br>10.2 ~ 12.6V<br>54V<br>27 ~ 54V<br>11.2A<br>604.8W<br>350mVp-p<br>45.9 ~ 56.7V<br>42V<br>21 ~ 42V<br>14.3A<br>600.6W<br>250mVp-p<br>35.7 ~ 44.1V<br>**EMC IMMUNITY**<br>**EMC EMISSION**<br>**Note.7**<br>COLD START 70A(t<br>=1000 s measured at 50% I<br>) at 230VAC;<br>width<br>peak<br>Per NEMA 410<br>μ<br>230VAC<br>277VAC<br>**FUNCTION REMOTE ON/OFF CONTROL** Power on : "High" >2 ~ 5V or Open circuit Power off : "Low" <0 ~ 0.5V or Short circuit<br>**5V STANDBY**<br>5V<br>: 5V@0.5A ; tolerance<br>5%, ripple : 100mVp-p(max.)<br>SB<br>±<br>**HLG-600H-12**<br>**HLG-600H-15**<br>**HLG-600H-20**<br>**HLG-600H-24**<br>**HLG-600H-30**<br>**HLG-600H-36**<br>**HLG-600H-48**<br>**HLG-600H-54**<br>**HLG-600H-42**<br>**MAX. No. of PSUs on 16A**<br>**CIRCUIT BREAKER**<br>1 unit (circuit breaker of type B) / 2 units (circuit breaker of type C) at 230VAC<br>**TOTAL HARMONIC DISTORTION** THD< 20% (@ load<br>50% /115VAC, 230VAC; @ load<br>75%/277VAC)<br>≧<br>≧<br>(Please refer to “TOTAL HARMONIC DISTORTION (THD)” section)<br>**PACKING**<br>3.9Kg; 4pcs/16.6Kg/0.9CUFT<br>**NOTE**<br>PF<br>0.98/115VAC, PF<br>0.95/230VAC, PF<br>0.93/277VAC @ full load<br>≧<br>≧<br>≧<br>(Please refer to "<br>"<br>)<br>POWER FACTOR (PF) CHARACTERISTIC section<br>℃<br>℃<br>℃<br>℃<br>Tcase=-40 ~ +90℃(Please refer to "OUTPUT LOAD vs TEMPERATURE" section)<br>Tcase=+90℃<br>**MAX. CASE TEMP.**<br>Rs GG QO<br>se<br>GO<br>Rs~~GG~~<br>~~Po~~<br>es es~~CG~~<br>~~(~~<br>~~RC~~<br>~~GD~~<br>~~a~~<br>~~a~~<br>eeGCG<br>eea<br>ss<br>~~Po~~<br>a~~Ce~~<br>a<br>Po<br>Po<br>es<br>as<br>a~~Ce~~<br>~~|~~<br>~~Ce~~<br>asPoCn<br>a<br>a<br>a<br>~~Ce~~<br>a<br>Rs<br>a<br>rs<br>~~Ge~~<br>es<br>as<br>a<br>as<br>~~Cn~~<br>1. All parameters NOT specially mentioned are measured at230VAC input, rated current and 25 —_of ambienttemperature.<br>2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.<br>3. Tolerance : includes set up tolerance, line regulation and load regulation.<br>4. Please refer to "DRIVING METHODS OF LED MODULE".<br>5. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.<br>6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.<br>7. The model certified for CCC(GB19510.14, GB19510.1, GB17743 and GB17625.1) is an optional model<br>. Please contact MEAN WELL for details.<br>8. This series meets the typical life expectancy of>62,000 hours ofoperation when Tcase, particularly© point (orTMP, per DLC), is about75<br>or less.<br>9. Please refer to the warranty statement on MEAN WELL's website at http:/www.meanwell.com<br>10. The driver is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a<br>360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to<br>perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http:/Avww.meanwell.com)<br>11. The ambient temperature derating of 3.55<br>/1000m with fanless models and of<br>5<br>/1000m with fan models for operating altitude higher than 2000m(6500ft),|**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC<br>I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃<br>Compliance to<br>Class B, EN55015, EN61000-3-2 Class C (<br>) ; EN61000-3-3,<br>;<br>EN55032 (CISPR32)<br>@ load<br>50%<br>EAC TP TC 020<br>≧<br>KC KN15, KN61547(for<br>)<br>24A,36A,48A,54A only<br>Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (<br>),<br>surge immunity Line-Earth 4KV, Line-Line 2KV<br>EAC TP TC 020 KC KN15, KN61547<br>;<br>(for<br>)<br>24A,36A,48A,54A only<br>**CONSTANT CURRENT REGION Note.4**<br>**MODEL**<br>**DC VOLTAGE**<br>**RATED CURRENT**<br>**RATED POWER**<br>**OUTPUT**<br>**VOLTAGE ADJ. RANGE**<br>**CURRENT ADJ. RANGE**<br>**LINE REGULATION**<br>**LOAD REGULATION**<br>**SETUP, RISE TIME**<br>**Note.6**<br>**HOLD UP TIME (Typ.)**<br>**VOLTAGE RANGE**<br>**Note.5**<br>**FREQUENCY RANGE**<br>**POWER FACTOR (Typ.)**<br>**EFFICIENCY**<br>**(Typ.)**<br>**AC CURRENT (Typ.)**<br>**INPUT**<br>**INRUSH CURRENT(Typ.)**<br>**LEAKAGE CURRENT**<br>**STANDBY POWER CONSUMPTION**<br>**SAFETY STANDARDS**<br>**Note.7**<br>**WORKING TEMP.**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**TEMP. COEFFICIENT**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**OVER CURRENT**<br>**Note.4**<br>**OVER VOLTAGE**<br>**OVER TEMPERATURE**<br>Adjustable for A-Type only (via built-in potentiometer)<br>Adjustable for A-Type only (via built-in potentiometer)<br>500ms, 80ms/ 115VAC, 230VAC<br>15ms/ 115VAC, 230VAC<br>90 ~ 305VAC 127 ~ 431VDC<br>(Please refer to "STATIC CHARACTERISTIC" section)<br>47 ~ 63Hz<br>7A / 115VAC 3.3A / 230VAC 2.9A / 277VAC<br><0.75mA / 277VAC<br><0.5W at remote off<br>95 ~ 108%<br>Constant current limiting, recovers automatically after fault condition is removed<br>20 ~ 95% RH non-condensing<br>-40 ~ +85<br>, 10 ~ 95% RH non-condensing<br>℃<br>±<br>℃<br>℃<br>0.03%/<br>(0 ~ 55<br>)<br>10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes<br>UL60950-1, UL8750(type”HL”), CSA C22.2 No. 250.13-12, ENEC EN61347-1, EN61347-2-13 independent, EN62384,<br>IP65 or IP67, J61347-1, J61347-2-13, CCC GB4943.1, EAC TP TC 004,<br>,<br>AS/NZS 60950.1(by CB)<br>KC KN61347-1, KN61347-2-13<br>24A,36A,48A,54A only<br>(for<br>) approved<br>76.9K hrs min. MIL-HDBK-217F (25<br>)<br>℃<br>280*144*48.5mm (L*W*H)<br>Shut down o/p voltage, re-power on to recover<br>Shut down o/p voltage, re-power on to recover<br>**RIPPLE & NOISE (max.) Note.2**<br>**VOLTAGE TOLERANCE Note.3**<br>**ENVIRONMENT**<br>**SAFETY &**<br>**EMC**<br>**(Note 10)**<br>**PROTECTION SHORT CIRCUIT**<br>Constant current limiting, recovers automatically after fault condition is removed<br>13 ~ 16V<br>16.5 ~ 20.5V 22 ~ 26V<br>26 ~ 30V<br>32.5 ~ 36.5V 39.5 ~ 43.5V<br>52.5 ~ 56.5V<br>46 ~ 50V<br>59 ~ 63V<br>92%<br>92.5%<br>93.5%<br>93.5%<br>94.5%<br>94.5%<br>95%<br>95%<br>95%<br>95%<br>95.5%<br>95.5%<br>96%<br>96%<br>96%<br>96%<br>96%<br>96%<br>±3.0%<br>20 ~ 40A<br>±2.0%<br>18 ~ 36A<br>±1.5%<br>14 ~ 28A<br>±1.0%<br>12.5 ~ 25A<br>±1.0%<br>10 ~ 20A<br>±1.0%<br>8.3 ~ 16.7A<br>±1.0%<br>6.2 ~ 12.5A<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±2.0%<br>±1.5%<br>±1.0%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±1.0%<br>5.6 ~ 11.2A<br>±0.5%<br>±0.5%<br>±1.0%<br>7.1 ~ 14.3A<br>±0.5%<br>±0.5%<br>12V<br>6 ~12V<br>15V<br>7.5 ~ 15V<br>20V<br>10 ~ 20V<br>24V<br>12 ~ 24V<br>30V<br>15 ~ 30V<br>36V<br>18 ~ 36V<br>48V<br>24 ~ 48V<br>40A<br>36A<br>28A<br>25A<br>20A<br>16.7A<br>12.5A<br>480W<br>540W<br>560W<br>600W<br>600W<br>601.2W<br>600W<br>150mVp-p<br>150mVp-p<br>12.7 ~ 15.8V<br>150mVp-p<br>17 ~ 21V<br>150mVp-p<br>20.4 ~ 25.2V<br>200mVp-p<br>25.5 ~ 31.5V<br>250mVp-p<br>30.6 ~ 37.8V<br>250mVp-p<br>40.8 ~ 50.4V<br>10.2 ~ 12.6V<br>54V<br>27 ~ 54V<br>11.2A<br>604.8W<br>350mVp-p<br>45.9 ~ 56.7V<br>42V<br>21 ~ 42V<br>14.3A<br>600.6W<br>250mVp-p<br>35.7 ~ 44.1V<br>**EMC IMMUNITY**<br>**EMC EMISSION**<br>**Note.7**<br>COLD START 70A(t<br>=1000 s measured at 50% I<br>) at 230VAC;<br>width<br>peak<br>Per NEMA 410<br>μ<br>230VAC<br>277VAC<br>**FUNCTION REMOTE ON/OFF CONTROL** Power on : "High" >2 ~ 5V or Open circuit Power off : "Low" <0 ~ 0.5V or Short circuit<br>**5V STANDBY**<br>5V<br>: 5V@0.5A ; tolerance<br>5%, ripple : 100mVp-p(max.)<br>SB<br>±<br>**HLG-600H-12**<br>**HLG-600H-15**<br>**HLG-600H-20**<br>**HLG-600H-24**<br>**HLG-600H-30**<br>**HLG-600H-36**<br>**HLG-600H-48**<br>**HLG-600H-54**<br>**HLG-600H-42**<br>**MAX. No. of PSUs on 16A**<br>**CIRCUIT BREAKER**<br>1 unit (circuit breaker of type B) / 2 units (circuit breaker of type C) at 230VAC<br>**TOTAL HARMONIC DISTORTION** THD< 20% (@ load<br>50% /115VAC, 230VAC; @ load<br>75%/277VAC)<br>≧<br>≧<br>(Please refer to “TOTAL HARMONIC DISTORTION (THD)” section)<br>**PACKING**<br>3.9Kg; 4pcs/16.6Kg/0.9CUFT<br>**NOTE**<br>PF<br>0.98/115VAC, PF<br>0.95/230VAC, PF<br>0.93/277VAC @ full load<br>≧<br>≧<br>≧<br>(Please refer to "<br>"<br>)<br>POWER FACTOR (PF) CHARACTERISTIC section<br>℃<br>℃<br>℃<br>℃<br>Tcase=-40 ~ +90℃(Please refer to "OUTPUT LOAD vs TEMPERATURE" section)<br>Tcase=+90℃<br>**MAX. CASE TEMP.**<br>Rs GG QO<br>se<br>GO<br>Rs~~GG~~<br>~~Po~~<br>es es~~CG~~<br>~~(~~<br>~~RC~~<br>~~GD~~<br>~~a~~<br>~~a~~<br>eeGCG<br>eea<br>ss<br>~~Po~~<br>a~~Ce~~<br>a<br>Po<br>Po<br>es<br>as<br>a~~Ce~~<br>~~|~~<br>~~Ce~~<br>asPoCn<br>a<br>a<br>a<br>~~Ce~~<br>a<br>Rs<br>a<br>rs<br>~~Ge~~<br>es<br>as<br>a<br>as<br>~~Cn~~<br>1. All parameters NOT specially mentioned are measured at230VAC input, rated current and 25 —_of ambienttemperature.<br>2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.<br>3. Tolerance : includes set up tolerance, line regulation and load regulation.<br>4. Please refer to "DRIVING METHODS OF LED MODULE".<br>5. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.<br>6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.<br>7. The model certified for CCC(GB19510.14, GB19510.1, GB17743 and GB17625.1) is an optional model<br>. Please contact MEAN WELL for details.<br>8. This series meets the typical life expectancy of>62,000 hours ofoperation when Tcase, particularly© point (orTMP, per DLC), is about75<br>or less.<br>9. Please refer to the warranty statement on MEAN WELL's website at http:/www.meanwell.com<br>10. The driver is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a<br>360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to<br>perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http:/Avww.meanwell.com)<br>11. The ambient temperature derating of 3.55<br>/1000m with fanless models and of<br>5<br>/1000m with fan models for operating altitude higher than 2000m(6500ft),|**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC<br>I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃<br>Compliance to<br>Class B, EN55015, EN61000-3-2 Class C (<br>) ; EN61000-3-3,<br>;<br>EN55032 (CISPR32)<br>@ load<br>50%<br>EAC TP TC 020<br>≧<br>KC KN15, KN61547(for<br>)<br>24A,36A,48A,54A only<br>Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (<br>),<br>surge immunity Line-Earth 4KV, Line-Line 2KV<br>EAC TP TC 020 KC KN15, KN61547<br>;<br>(for<br>)<br>24A,36A,48A,54A only<br>**CONSTANT CURRENT REGION Note.4**<br>**MODEL**<br>**DC VOLTAGE**<br>**RATED CURRENT**<br>**RATED POWER**<br>**OUTPUT**<br>**VOLTAGE ADJ. RANGE**<br>**CURRENT ADJ. RANGE**<br>**LINE REGULATION**<br>**LOAD REGULATION**<br>**SETUP, RISE TIME**<br>**Note.6**<br>**HOLD UP TIME (Typ.)**<br>**VOLTAGE RANGE**<br>**Note.5**<br>**FREQUENCY RANGE**<br>**POWER FACTOR (Typ.)**<br>**EFFICIENCY**<br>**(Typ.)**<br>**AC CURRENT (Typ.)**<br>**INPUT**<br>**INRUSH CURRENT(Typ.)**<br>**LEAKAGE CURRENT**<br>**STANDBY POWER CONSUMPTION**<br>**SAFETY STANDARDS**<br>**Note.7**<br>**WORKING TEMP.**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**TEMP. COEFFICIENT**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**OVER CURRENT**<br>**Note.4**<br>**OVER VOLTAGE**<br>**OVER TEMPERATURE**<br>Adjustable for A-Type only (via built-in potentiometer)<br>Adjustable for A-Type only (via built-in potentiometer)<br>500ms, 80ms/ 115VAC, 230VAC<br>15ms/ 115VAC, 230VAC<br>90 ~ 305VAC 127 ~ 431VDC<br>(Please refer to "STATIC CHARACTERISTIC" section)<br>47 ~ 63Hz<br>7A / 115VAC 3.3A / 230VAC 2.9A / 277VAC<br><0.75mA / 277VAC<br><0.5W at remote off<br>95 ~ 108%<br>Constant current limiting, recovers automatically after fault condition is removed<br>20 ~ 95% RH non-condensing<br>-40 ~ +85<br>, 10 ~ 95% RH non-condensing<br>℃<br>±<br>℃<br>℃<br>0.03%/<br>(0 ~ 55<br>)<br>10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes<br>UL60950-1, UL8750(type”HL”), CSA C22.2 No. 250.13-12, ENEC EN61347-1, EN61347-2-13 independent, EN62384,<br>IP65 or IP67, J61347-1, J61347-2-13, CCC GB4943.1, EAC TP TC 004,<br>,<br>AS/NZS 60950.1(by CB)<br>KC KN61347-1, KN61347-2-13<br>24A,36A,48A,54A only<br>(for<br>) approved<br>76.9K hrs min. MIL-HDBK-217F (25<br>)<br>℃<br>280*144*48.5mm (L*W*H)<br>Shut down o/p voltage, re-power on to recover<br>Shut down o/p voltage, re-power on to recover<br>**RIPPLE & NOISE (max.) Note.2**<br>**VOLTAGE TOLERANCE Note.3**<br>**ENVIRONMENT**<br>**SAFETY &**<br>**EMC**<br>**(Note 10)**<br>**PROTECTION SHORT CIRCUIT**<br>Constant current limiting, recovers automatically after fault condition is removed<br>13 ~ 16V<br>16.5 ~ 20.5V 22 ~ 26V<br>26 ~ 30V<br>32.5 ~ 36.5V 39.5 ~ 43.5V<br>52.5 ~ 56.5V<br>46 ~ 50V<br>59 ~ 63V<br>92%<br>92.5%<br>93.5%<br>93.5%<br>94.5%<br>94.5%<br>95%<br>95%<br>95%<br>95%<br>95.5%<br>95.5%<br>96%<br>96%<br>96%<br>96%<br>96%<br>96%<br>±3.0%<br>20 ~ 40A<br>±2.0%<br>18 ~ 36A<br>±1.5%<br>14 ~ 28A<br>±1.0%<br>12.5 ~ 25A<br>±1.0%<br>10 ~ 20A<br>±1.0%<br>8.3 ~ 16.7A<br>±1.0%<br>6.2 ~ 12.5A<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±2.0%<br>±1.5%<br>±1.0%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±1.0%<br>5.6 ~ 11.2A<br>±0.5%<br>±0.5%<br>±1.0%<br>7.1 ~ 14.3A<br>±0.5%<br>±0.5%<br>12V<br>6 ~12V<br>15V<br>7.5 ~ 15V<br>20V<br>10 ~ 20V<br>24V<br>12 ~ 24V<br>30V<br>15 ~ 30V<br>36V<br>18 ~ 36V<br>48V<br>24 ~ 48V<br>40A<br>36A<br>28A<br>25A<br>20A<br>16.7A<br>12.5A<br>480W<br>540W<br>560W<br>600W<br>600W<br>601.2W<br>600W<br>150mVp-p<br>150mVp-p<br>12.7 ~ 15.8V<br>150mVp-p<br>17 ~ 21V<br>150mVp-p<br>20.4 ~ 25.2V<br>200mVp-p<br>25.5 ~ 31.5V<br>250mVp-p<br>30.6 ~ 37.8V<br>250mVp-p<br>40.8 ~ 50.4V<br>10.2 ~ 12.6V<br>54V<br>27 ~ 54V<br>11.2A<br>604.8W<br>350mVp-p<br>45.9 ~ 56.7V<br>42V<br>21 ~ 42V<br>14.3A<br>600.6W<br>250mVp-p<br>35.7 ~ 44.1V<br>**EMC IMMUNITY**<br>**EMC EMISSION**<br>**Note.7**<br>COLD START 70A(t<br>=1000 s measured at 50% I<br>) at 230VAC;<br>width<br>peak<br>Per NEMA 410<br>μ<br>230VAC<br>277VAC<br>**FUNCTION REMOTE ON/OFF CONTROL** Power on : "High" >2 ~ 5V or Open circuit Power off : "Low" <0 ~ 0.5V or Short circuit<br>**5V STANDBY**<br>5V<br>: 5V@0.5A ; tolerance<br>5%, ripple : 100mVp-p(max.)<br>SB<br>±<br>**HLG-600H-12**<br>**HLG-600H-15**<br>**HLG-600H-20**<br>**HLG-600H-24**<br>**HLG-600H-30**<br>**HLG-600H-36**<br>**HLG-600H-48**<br>**HLG-600H-54**<br>**HLG-600H-42**<br>**MAX. No. of PSUs on 16A**<br>**CIRCUIT BREAKER**<br>1 unit (circuit breaker of type B) / 2 units (circuit breaker of type C) at 230VAC<br>**TOTAL HARMONIC DISTORTION** THD< 20% (@ load<br>50% /115VAC, 230VAC; @ load<br>75%/277VAC)<br>≧<br>≧<br>(Please refer to “TOTAL HARMONIC DISTORTION (THD)” section)<br>**PACKING**<br>3.9Kg; 4pcs/16.6Kg/0.9CUFT<br>**NOTE**<br>PF<br>0.98/115VAC, PF<br>0.95/230VAC, PF<br>0.93/277VAC @ full load<br>≧<br>≧<br>≧<br>(Please refer to "<br>"<br>)<br>POWER FACTOR (PF) CHARACTERISTIC section<br>℃<br>℃<br>℃<br>℃<br>Tcase=-40 ~ +90℃(Please refer to "OUTPUT LOAD vs TEMPERATURE" section)<br>Tcase=+90℃<br>**MAX. CASE TEMP.**<br>Rs GG QO<br>se<br>GO<br>Rs~~GG~~<br>~~Po~~<br>es es~~CG~~<br>~~(~~<br>~~RC~~<br>~~GD~~<br>~~a~~<br>~~a~~<br>eeGCG<br>eea<br>ss<br>~~Po~~<br>a~~Ce~~<br>a<br>Po<br>Po<br>es<br>as<br>a~~Ce~~<br>~~|~~<br>~~Ce~~<br>asPoCn<br>a<br>a<br>a<br>~~Ce~~<br>a<br>Rs<br>a<br>rs<br>~~Ge~~<br>es<br>as<br>a<br>as<br>~~Cn~~<br>1. All parameters NOT specially mentioned are measured at230VAC input, rated current and 25 —_of ambienttemperature.<br>2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.<br>3. Tolerance : includes set up tolerance, line regulation and load regulation.<br>4. Please refer to "DRIVING METHODS OF LED MODULE".<br>5. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.<br>6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.<br>7. The model certified for CCC(GB19510.14, GB19510.1, GB17743 and GB17625.1) is an optional model<br>. Please contact MEAN WELL for details.<br>8. This series meets the typical life expectancy of>62,000 hours ofoperation when Tcase, particularly© point (orTMP, per DLC), is about75<br>or less.<br>9. Please refer to the warranty statement on MEAN WELL's website at http:/www.meanwell.com<br>10. The driver is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a<br>360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to<br>perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http:/Avww.meanwell.com)<br>11. The ambient temperature derating of 3.55<br>/1000m with fanless models and of<br>5<br>/1000m with fan models for operating altitude higher than 2000m(6500ft),|**HLG-600H-12**<br>GG|**HLG-600H-15**<br>GG|**HLG-600H-20**<br>GG|**HLG-600H-24**<br>QO|**HLG-600H-30**<br>QO|**HLG-600H-36**|**HLG-600H-42**|**HLG-600H-48**|**HLG-600H-54**| |---|---|---|---|---|---|---|---|---|---|---|---| ||**DC VOLTAGE**<br>Rs||12V<br>GG|15V<br>GG|20V<br>GG|24V<br>QO|30V<br>QO|36V|42V|48V|54V| ||**CONSTANT CURRENT REGION Note.4**<br>Rs <br>se<br>Rs||6 ~12V<br> GG<br>se<br>~~GG~~|7.5 ~ 15V<br>GG<br>~~GG~~|10 ~ 20V<br>GG <br>GO<br>~~GG~~|12 ~ 24V<br> QO<br>GO<br>~~GG~~|15 ~ 30V<br>QO<br>GO<br>~~GG~~|18 ~ 36V<br>GO<br>~~GG~~|21 ~ 42V<br>~~GG~~|24 ~ 48V<br>~~GG~~|27 ~ 54V<br>~~GG~~| ||**RATED CURRENT**<br>se<br>Rs||40A<br>se<br>~~GG~~|36A<br>~~GG~~|28A<br>GO<br>~~GG~~|25A<br>GO<br>~~GG~~|20A<br>GO<br>~~GG~~|16.7A<br>GO<br>~~GG~~|14.3A<br>~~GG~~|12.5A<br>~~GG~~|11.2A<br>~~GG~~| ||**RATED POWER**<br>Rs<br>~~Po~~<br>es<br>~~RC~~||480W<br>~~GG~~<br>~~Po~~<br>es<br>~~RC~~|540W<br>~~GG~~<br>~~Po~~<br>~~CG~~<br>~~RC~~|560W<br>~~GG~~<br>~~Po~~<br>~~CG~~|600W<br>~~GG~~<br>~~Po~~<br>~~CG~~|600W<br>~~GG~~<br>~~Po~~<br>~~CG~~|601.2W<br>~~GG~~<br>~~Po~~<br>~~CG~~|600.6W<br>~~GG~~<br>~~Po~~<br>~~CG~~<br>~~(~~|600W<br>~~GG~~<br>~~Po~~<br>~~CG~~<br>~~(~~|604.8W<br>~~GG~~<br>~~Po~~<br>~~CG~~<br>~~(~~| ||**RIPPLE & NOISE (max.) Note.2**<br>~~Po~~<br>es<br>~~RC~~||150mVp-p<br>~~Po~~<br>es<br>~~RC~~|150mVp-p<br>~~Po~~<br>~~CG~~<br>~~RC~~|150mVp-p<br>~~Po~~<br>~~CG~~|150mVp-p<br>~~Po~~<br>~~CG~~|200mVp-p<br>~~Po~~<br>~~CG~~|250mVp-p<br>~~Po~~<br>~~CG~~|250mVp-p<br>~~Po~~<br>~~CG~~<br>~~(~~|250mVp-p<br>~~Po~~<br>~~CG~~<br>~~(~~|350mVp-p<br>~~Po~~<br>~~CG~~<br>~~(~~| ||**VOLTAGE ADJ. RANGE**<br>es <br>~~RC~~||Adjustable for A-Type only (via built-in potentiometer)<br>12.7 ~ 15.8V<br>17 ~ 21V<br>20.4 ~ 25.2V<br>25.5 ~ 31.5V<br>30.6 ~ 37.8V<br>40.8 ~ 50.4V<br>10.2 ~ 12.6V<br>45.9 ~ 56.7V<br>35.7 ~ 44.1V<br> es~~CG~~<br>~~(~~<br>~~RC~~<br>~~GD~~||||||||| ||**CURRENT ADJ. RANGE**<br>ee||Adjustable for A-Type only (via built-in potentiometer)<br>20 ~ 40A<br>18 ~ 36A<br>14 ~ 28A<br>12.5 ~ 25A<br>10 ~ 20A<br>8.3 ~ 16.7A<br>~~GD~~<br>~~a~~<br>~~a~~<br>GCG||||||6.2 ~ 12.5A<br>5.6 ~ 11.2A<br>7.1 ~ 14.3A<br>~~GD~~<br>~~a~~<br>~~a~~<br>GCG||| ||**VOLTAGE TOLERANCE Note.3**<br>ee<br>eea||±3.0%<br>~~a~~<br>GCG<br>a|±2.0%<br>~~a~~<br>GCG<br>ss|±1.5%<br>~~a~~<br>GCG<br>ss|±1.0%<br>~~a~~<br>GCG|±1.0%<br>~~a~~<br>GCG|±1.0%<br>~~a~~<br>GCG|±1.0%<br>~~a~~<br>GCG|±1.0%<br>~~a~~<br>GCG|±1.0%<br>~~a~~<br>GCG| ||**LINE REGULATION**<br>ee<br>eea||±0.5%<br>GCG<br>a|±0.5%<br>GCG<br>ss|±0.5%<br>GCG<br>ss|±0.5%<br>GCG|±0.5%<br>GCG|±0.5%<br>GCG|±0.5%<br>GCG|±0.5%<br>GCG|±0.5%<br>GCG| ||**LOAD REGULATION**<br>eea<br>~~Po~~||±2.0%<br>a<br>~~Po~~|±1.5%<br>ss<br>~~Po~~|±1.0%<br>ss<br>~~Po~~|±0.5%<br>~~Po~~|±0.5%<br>~~Po~~|±0.5%<br>~~Po~~|±0.5%<br>~~Po~~|±0.5%<br>~~Po~~|±0.5%<br>~~Po~~| ||**SETUP, RISE TIME**<br>**Note.6**<br>~~Po~~<br>a||500ms, 80ms/ 115VAC, 230VAC<br>~~Po~~<br>||||||||| ||**HOLD UP TIME (Typ.)**<br>~~Ce~~||15ms/ 115VAC, 230VAC<br>~~Ce~~||||||||| ||**VOLTAGE RANGE**<br>**Note.5**||90 ~ 305VAC 127 ~ 431VDC<br>(Please refer to "STATIC CHARACTERISTIC" section)||||||||| ||**FREQUENCY RANGE**<br>a||47 ~ 63Hz||||||||| ||**POWER FACTOR (Typ.)**||PF<br>0.98/115VAC, PF<br>0.95/230VAC, PF<br>0.93/277VAC @ full load<br>≧<br>≧<br>≧<br>(Please refer to "<br>"<br>)<br>POWER FACTOR (PF) CHARACTERISTIC section||||||||| ||**TOTAL HARMONIC DISTORTION** <br>Po||THD< 20% (@ load<br>50% /115VAC, 230VAC; @ load<br>75%/277VAC)<br>≧<br>≧<br>(Please refer to “TOTAL HARMONIC DISTORTION (THD)” section)||||||||| ||**EFFICIENCY**<br>**(Typ.)**<br>Po<br>Po<br>es|230VAC<br>277VAC<br>Po<br>Po<br>es|92%<br>92.5%|93.5%<br>93.5%|94.5%<br>94.5%|95%<br>95%|95%<br>95%|95.5%<br>95.5%|96%<br>96%|96%<br>96%|96%<br>96%| ||**AC CURRENT (Typ.)**<br>Po<br>es<br>as||7A / 115VAC 3.3A / 230VAC 2.9A / 277VAC||||||||| ||**INRUSH CURRENT(Typ.)**<br>es<br>as||COLD START 70A(t<br>=1000 s measured at 50% I<br>) at 230VAC;<br>width<br>peak<br>Per NEMA 410<br>μ||||||||| ||**MAX. No. of PSUs on 16A**<br>**CIRCUIT BREAKER**<br>as<br>a||1 unit (circuit breaker of type B) / 2 units (circuit breaker of type C) at 230VAC<br>||||||||| ||**LEAKAGE CURRENT**<br>a~~Ce~~||<0.75mA / 277VAC<br>~~Ce~~||||||||| ||**STANDBY POWER CONSUMPTION**<br>~~Ce~~||<0.5W at remote off<br>~~Ce~~||||||||| ||**OVER CURRENT**<br>**Note.4**<br>~~Ce~~<br>as||95 ~ 108%<br>Constant current limiting, recovers automatically after fault condition is removed<br>~~Ce~~<br>~~|~~<br>~~Ce~~<br>||||||||| ||**SHORT CIRCUIT**<br>asPo||Constant current limiting, recovers automatically after fault condition is removed<br>~~Ce~~<br>Po||||||||| ||**OVER VOLTAGE**<br> <br>asPo||Shut down o/p voltage, re-power on to recover<br>13 ~ 16V<br>16.5 ~ 20.5V 22 ~ 26V<br>26 ~ 30V<br>32.5 ~ 36.5V 39.5 ~ 43.5V<br>52.5 ~ 56.5V<br>46 ~ 50V<br>59 ~ 63V<br>~~Ce~~<br>PoCn||||||||| ||**OVER TEMPERATURE**<br>a||Shut down o/p voltage, re-power on to recover||||||||| ||**REMOTE ON/OFF CONTROL** <br>a||Power on : "High" >2 ~ 5V or Open circuit Power off : "Low" <0 ~ 0.5V or Short circuit||||||||| ||<br>**5V STANDBY**<br>a<br>~~Ce~~||5V<br>: 5V@0.5A ; tolerance<br>5%, ripple : 100mVp-p(max.)<br>SB<br>±<br>~~Ce~~||||||||| ||**WORKING TEMP.**<br>~~Ce~~<br>a||Tcase=-40 ~ +90℃(Please refer to "OUTPUT LOAD vs TEMPERATURE" section)<br>~~Ce~~||||||||| ||**MAX. CASE TEMP.**<br>a<br>Rs||Tcase=+90℃||||||||| ||**WORKING HUMIDITY**<br>a<br>Rs<br>a||20 ~ 95% RH non-condensing||||||||| ||**STORAGE TEMP., HUMIDITY**<br>Rs<br>a<br>rs||-40 ~ +85<br>, 10 ~ 95% RH non-condensing<br>℃||||||||| ||**TEMP. COEFFICIENT**<br>rs<br>~~Ge~~||±<br>℃<br>℃<br>0.03%/<br>(0 ~ 55<br>)<br>~~Ge~~||||||||| ||**VIBRATION**<br>rs<br>~~Ge~~||10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes<br>~~Ge~~||||||||| ||**SAFETY STANDARDS**<br>**Note.7**<br>es||UL60950-1, UL8750(type”HL”), CSA C22.2 No. 250.13-12, ENEC EN61347-1, EN61347-2-13 independent, EN62384,<br>IP65 or IP67, J61347-1, J61347-2-13, CCC GB4943.1, EAC TP TC 004,<br>,<br>AS/NZS 60950.1(by CB)<br>KC KN61347-1, KN61347-2-13<br>24A,36A,48A,54A only<br>(for<br>) approved||||||||| ||**WITHSTAND VOLTAGE**<br>es<br>as||I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC||||||||| ||**ISOLATION RESISTANCE**<br>es<br>as||I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃||||||||| ||**EMC EMISSION**<br>**Note.7**<br>as||Compliance to<br>Class B, EN55015, EN61000-3-2 Class C (<br>) ; EN61000-3-3,<br>;<br>EN55032 (CISPR32)<br>@ load<br>50%<br>EAC TP TC 020<br>≧<br>KC KN15, KN61547(for<br>)<br>24A,36A,48A,54A only||||||||| ||**EMC IMMUNITY**<br>a||Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (<br>),<br>surge immunity Line-Earth 4KV, Line-Line 2KV<br>EAC TP TC 020 KC KN15, KN61547<br>;<br>(for<br>)<br>24A,36A,48A,54A only||||||||| ||**MTBF**<br>a<br>as||76.9K hrs min. MIL-HDBK-217F (25<br>)<br>℃||||||||| ||**DIMENSION**<br>a<br>as||280*144*48.5mm (L*W*H)||||||||| ||**PACKING**<br>3.9Kg; 4pcs/16.6Kg/0.9CUFT<br>℃<br>℃<br>℃<br>℃<br>as<br>~~Cn~~<br>1. All parameters NOT specially mentioned are measured at230VAC input, rated current and 25 —_of ambienttemperature.<br>2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.<br>3. Tolerance : includes set up tolerance, line regulation and load regulation.<br>4. Please refer to "DRIVING METHODS OF LED MODULE".<br>5. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.<br>6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.<br>7. The model certified for CCC(GB19510.14, GB19510.1, GB17743 and GB17625.1) is an optional model<br>. Please contact MEAN WELL for details.<br>8. This series meets the typical life expectancy of>62,000 hours ofoperation when Tcase, particularly© point (orTMP, per DLC), is about75<br>or less.<br>9. Please refer to the warranty statement on MEAN WELL's website at http:/www.meanwell.com<br>10. The driver is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a<br>360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to<br>perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http:/Avww.meanwell.com)<br>11. The ambient temperature derating of 3.55<br>/1000m with fanless models and of<br>5<br>/1000m with fan models for operating altitude higher than 2000m(6500ft),||||||||||| ℃ ℃ /1000m with fanless models and of 5 ℃ /1000m with fan _File Name:HLG-600H-SPEC 2018-09-18_ **HLG - 600H series** ## 600W Constant Voltage + Constant Current LED Driver ## **BLOCK DIAGRAM** **==> picture [475 x 201] intentionally omitted <==** **----- Start of picture text -----**<br> fosc : 100KHz(5V)<br>70KHz(12V~54V)<br>+5VSB<br>DETECTION<br>CIRCUIT<br>RECTIFIERS<br>POWER SWITCHING<br>& +5VSB<br>PWM CONTROL<br>FILTER<br>EMI FILTER PFC POWER RECTIFIERS +V<br>I/P & CIRCUIT SWITCHING & -V<br>RECTIFIERS FILTER<br>DIM+<br>O.L.P.<br>DIM-<br>(B Type)<br>DETECTION<br>FG O.L.P.<br>PWM & PFC CIRCUIT<br>PFC CONTROL<br>CONTROL<br>O.V.P.<br>PS/ON<br>PS/ON<br>CONTROL<br>**----- End of picture text -----**<br> ## **DRIVING METHODS OF LED MODULE** - ※ This series is able to work in either Constant Current mode (a direct drive way) or Constant Voltage mode (usually through additional DC/DC driver) to drive the LEDs. **==> picture [454 x 158] intentionally omitted <==** **----- Start of picture text -----**<br> In the constant current region, the highest voltage at the output of the driver<br>100<br>depends on the configuration of the end systems.<br>Should there be any compatibility issues, please contact MEAN WELL.<br>(A) Constant (B)<br>Voltage area Constant<br>Current region<br>50 100 Io (%)<br>Typical output current normalized by rated current (%)<br>Vo(%)<br>**----- End of picture text -----**<br> _File Name:HLG-600H-SPEC 2018-09-18_ **HLG - 600H series** 600W Constant Voltage + Constant Current LED Driver ## **DIMMING OPERATION** **==> picture [504 x 104] intentionally omitted <==** **----- Start of picture text -----**<br> RC+(Brown)<br>RC- & GND(Black)<br>+5VSB(Yellow)<br>DIM+(Blue)<br>DIM-(White)<br>FG AC/L(Brown) (Green/Yellow) HLG-600H -V(Black)+V(Red)<br>AC/N(Blue) -V(Black)+V(Red)<br>**----- End of picture text -----**<br> ## ※ **3 in 1 dimming function (for B-Type)** - �Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 0 ~ 10VDC, or 10V PWM signal or resistance. - �Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers. �Dimming source current from power supply: 100μA (typ.) ◎ Applying additive 0 ~ 10VDC 100% **==> picture [443 x 474] intentionally omitted <==** **----- Start of picture text -----**<br> Applying additive 0 ~ 10VDC 100%<br>90%<br>80%<br>+<br>+V + 70%<br>60%<br>-<br>-V - 50%<br>DIM+ 40%<br>+<br>Additive Voltage 30%<br>- 20%<br>DIM-<br>10%<br>“DO NOT connect "DIM- to -V" 0%<br>0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V<br>Dimming input: Additive voltage<br>◎ Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz): 100%<br>90%<br>80%<br>+<br>+V + 70%<br>60%<br>-<br>-V - 50%<br>DIM+ 40%<br>Additive PWM signal 30%<br>20%<br>DIM-<br>10%<br>“DO NOT connect "DIM- to -V" 0%<br>0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%<br>Duty cycle of additive 10V PWM signal dimming input<br>◎ Applying additive resistance: 100%<br>90%<br>+ 80%<br>+V +<br>70%<br>- 60%<br>-V -<br>50%<br>DIM+<br>40%<br>Additive Resistance 30%<br>DIM- 20%<br>10%<br>“DO NOT connect "DIM- to -V"<br>0%<br>Short 10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N<br>(N=driver quantity for synchronized dimming operation)<br>Note : 1. Min. dimming level is about 6% and the output current is not defined when 0%< Iout<6%. Dimming input: Additive resistance<br>2. The output current could drop down to 0% when dimming input is about 0kΩ or 0Vdc, or 10V PWM signal with 0% duty cycle.<br>Output current (%)<br>Output current (%)<br>Output current (%)<br>**----- End of picture text -----**<br> _File Name:HLG-600H-SPEC 2018-09-18_ > 600W Constant Voltage + Constant Current LED Driver **HLG - 600H series** ## **OUTPUT LOAD vs TEMPERATURE** **==> picture [510 x 644] intentionally omitted <==** **----- Start of picture text -----**<br> 100 100<br>80 80<br>60 60<br>40 40<br>20 20<br>-40 -25 -10 0 15 30 50 55 60 70 (HORIZONTAL) -40 -25 0 20 45 55 65 75 90 (HORIZONTAL)<br>AMBIENT TEMPERATURE,Ta ( ℃ ) Tcase ( ℃ )<br>◎ If HLG-600H operates in constant current mode with the<br>rated current, the maximum workable Ta is 55℃.<br>STATIC CHARACTERISTICS POWER FACTOR(PF) CHARACTERISTIC<br>※ Tcase at 80 ℃<br>Constant Current Mode<br>1.00<br>100<br>0.98<br>90 0.96<br>80 0.94<br>0.92<br>70 0.90 277V<br>60 0.88 230V<br>0.86<br>115V<br>50<br>0.84<br>40 0.82<br>0.80<br>90 115 125 135 145 155 165 175 180 200 230 305 0.78<br>50% 60% 70% 80% 90% 100%<br>INPUT VOLTAGE (V) 60Hz (600W)<br>LOAD<br>※ De-rating is needed under low input voltage.<br>TOTAL HARMONIC DISTORTION (THD) EFFICIENCY vs LOAD<br>HLG-600H series possess superior working efficiency that up to 96%<br>※ 48V Model, Tcase at 80℃ can be reached in field applications.<br>※ 48V Model, Tcase at 80℃<br>16<br>100<br>14<br>98<br>12 96<br>10 94<br>8 277VAC 92 277V<br>230V<br>6 230VAC 90<br>115V<br>115VAC<br>4 88<br>2 86<br>0 84<br>50% 60% 70% 80% 90% 100% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%<br>LOAD LOAD<br>LOAD (%) LOAD (%)<br>LOAD (%)<br>THD(%)<br>EFFICIENCY (%)<br>PF<br>**----- End of picture text -----**<br> _File Name:HLG-600H-SPEC 2018-09-18_ **HLG - 600H series** 600W Constant Voltage + Constant Current LED Driver ## **LIFETIME** **==> picture [313 x 217] intentionally omitted <==** **----- Start of picture text -----**<br> 120<br>100<br>80<br>60<br>40<br>20<br>0<br>20 30 40 50 60 70 80 90<br>Tcase (℃ )<br>LIFETIME(Kh)<br>**----- End of picture text -----**<br> _File Name:HLG-600H-SPEC 2018-09-18_ ## 600W Constant Voltage + Constant Current LED Driver ## **HLG - 600H series** **==> picture [511 x 668] intentionally omitted <==** **----- Start of picture text -----**<br> MECHANICAL SPECIFICATION Case No. 228 Unit:mm<br>※ A-Type<br>280<br>13.4 253.2<br>8.9<br>300±20<br>UL2517 22AWG×3C RC+(Brown)<br>RC- & GND(Black)<br>SJTW 14AWG×2C +5VSB(Yellow)<br>300±20 126.6 -V(Black)<br>FG (Green/Yellow) T case tc Io Vo +V(Red)<br>AC/L(Brown) ADJ. ADJ. -V(Black)<br>AC/N(Blue) SJOW 17AWG×3C & H05RN-F 3×1.0mm2 SJTW 14AWG×2C +V(Red)<br>ψ4.5×4PL<br>LED<br>�tc : Max. Case Temperature<br>25±2<br>※ B-Type<br>280<br>13.4 253.2<br>8.9<br>350±20<br>300±20<br>UL2517 22AWG×3C RC+(Brown)<br>RC- & GND(Black)<br>+5VSB(Yellow)<br>UL2517 18AWG×2C DIM+(Blue)<br>FG (Green/Yellow) 300±20 T case tc 126.6 SJTW 14AWG×2C -V(Black)DIM-(White)<br>AC/L(Brown) +V(Red)<br>AC/N(Blue) SJOW 17AWG×3C & H05RN-F 3×1.0mm2 SJTW 14AWG×2C -V(Black)+V(Red)<br>ψ4.5×4PL<br>�tc : Max. Case Temperature<br>25±2<br>48.5<br>48.5<br>15<br>97 144<br>15<br>15<br>97 144<br>15<br>47<br>47<br>**----- End of picture text -----**<br> _File Name:HLG-600H-SPEC 2018-09-18_ **HLG - 600H series** 600W Constant Voltage + Constant Current LED Driver **==> picture [504 x 529] intentionally omitted <==** **----- Start of picture text -----**<br> ※ AB-Type<br>280<br>13.4 253.2<br>8.9<br>350±20<br>300±20<br>UL2517 22AWG×3C RC+(Brown)<br>RC- & GND(Black)<br>+5VSB(Yellow)<br>UL2517 18AWG×2C DIM+(Blue)<br>FG (Green/Yellow) 300±20 T case tc 126.6Io Vo SJTW 14AWG×2C -V(Black)DIM-(White)<br>AC/L(Brown) ADJ. ADJ. +V(Red)<br>AC/N(Blue) SJOW 17AWG×3C & H05RN-F 3×1.0mm2 SJTW 14AWG×2C -V(Black)+V(Red)<br>ψ4.5×4PL<br>�tc : Max. Case Temperature<br>25±2<br>※ Blank-Type<br>280<br>13.4 253.2<br>8.9<br>300±20<br>UL2517 22AWG×3C RC+(Brown)<br>RC- & GND(Black)<br>SJTW 14AWG×2C +5VSB(Yellow)<br>300±20 126.6 -V(Black)<br>FG (Green/Yellow) T case tc +V(Red)<br>AC/L(Brown) -V(Black)<br>AC/N(Blue) SJOW 17AWG×3C & H05RN-F 3×1.0mm2 SJTW 14AWG×2C +V(Red)<br>ψ4.5×4PL<br>�tc : Max. Case Temperature<br>25±2<br>48.5<br>48.5<br>15<br>97 144<br>15<br>15<br>97 144<br>15<br>47<br>47<br>**----- End of picture text -----**<br> ## **INSTALLATION MANUAL** Please refer to : http://www.meanwell.com/manual.html _File Name:HLG-600H-SPEC 2018-09-18_
Updated at April 17, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →