HLG-480H-36

> 480W  Constant Voltage + Constant Current LED Driver **HLG - 480H  series** 

## **  IP65 IP67** ~~BA~~ Y 

## ® (except for AB,Dx,D2-type) Ca (for Blank/A-type) AL: **** K= © Fl CBC€ 

## ■ **** 

- ‧ 

- ‧Metal housing with class I design 

- ‧Built-in active PFC function 

- ‧ 

- ‧   

## ■ **** 

   - ‧  

   - ‧ 

   - ‧ 

   - ‧ 

   - ‧Ⅰ,  

- ‧ 

- ‧ 

## ■ **** 

 current output. HLG-480H operates from 90～305VAC and offers models with different rated voltage ranging between 24V and 54V. Thanks to the high efficiency up to 95.5%, with the fanless design, the entire series is able to operate for -40℃ ~ +90℃ case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications.HLG-480H is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system. 

## ■ **** 

## **  ** LL **** 

 

   

|||||
|---|---|---|---|
|||I||
|||I||
|B||||
|||<br>I||
|Dx||||
|||||



_File Name:HLG-480H-SPEC   2020-03-30_ 

## 480W  Constant Voltage + Constant Current LED Driver **HLG - 480H  series** 

## **SPECIFICATION** 

||**CONSTANT CURRENT REGIONNote.4**<br>**MODEL**<br>**DC VOLTAGE**<br>**OUTPUT**<br>**CURRENT ADJ. RANGE**<br>**LINE REGULATION**<br>**LOAD REGULATION**<br>**SETUP, RISE TIMENote.6**<br>**HOLD UP TIME (Typ.)**<br>**VOLTAGE RANGENote.5**<br>**FREQUENCY RANGE**<br>**POWER FACTOR (Typ.)**<br>**AC CURRENT (Typ.)**<br>**INPUT**<br>**INRUSH CURRENT(Typ.)**<br>**LEAKAGE CURRENT**<br>**MAX. NO.** **of** **PSUs** **on** **16A**<br>**CIRCUIT** **BREAKER**<br>**SAFETY STANDARDS**<br>**WORKING TEMP.**<br>**WORKING HUMIDITY**<br>**MAX. CASE TEMP.**<br>**STORAGE TEMP., HUMIDITY**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**OVER CURRENT**<br>**OVER VOLTAGE**<br>**OVER TEMPERATURE**<br>47 ~ 63Hz<br>PF≧0.98/115VAC, PF≧0.97/230VAC, PF≧0.95/277VAC @ full load<br>5A / 115VAC          2.45A / 230VAC          2A / 277VAC<br><0.75mA / 277VAC<br>2unit(circuit breaker of type B) / 3units(circuit breaker of type C) at 230VAC<br>95 ~ 108%<br>Constant current limiting, recovers automatically after fault condition is removed<br>20 ~ 95% RH non-condensing<br>Tcase=+90℃<br>-40 ~ +80℃, 10 ~ 95% RH non-condensing<br>10 ~ 500Hz, 5G 12min./1cycle, period for  72min. each along X, Y, Z axes<br>345.5K hrs min.      Telcordia SR-332(Bellcore) ; 95.3K hrs min.      MIL-HDBK-217F (25℃)<br>262*125*43.8mm (L*W*H)<br>**VOLTAGE TOLERANCENote.3**<br>**ENVIRONMENT**<br>**SAFETY &**<br>**EMC**<br>**PROTECTION SHORT CIRCUIT**<br>Constant current limiting, recovers automatically after fault condition is removed<br>94%<br>94.5%<br>94.5%<br>95%<br>95%<br>95.5%<br>95%<br>95.5%<br>94.5%<br>95%<br>95%<br>95%<br>±1.0%<br>±1.0%<br>±1.0%<br>±1.0%<br>±1.0%<br>±1.0%<br>10 ~ 20A<br>8 ~ 16A<br>6.6 ~ 13.3A<br>5.7 ~ 11.4A<br>5 ~ 10A<br>4.4 ~ 8.9A<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>24V<br>**HLG-480H-24**<br>**HLG-480H-30**<br>**HLG-480H-36**<br>**HLG-480H-42**<br>**HLG-480H-48**<br>**HLG-480H-54**<br>30V<br>36V<br>42V<br>48V<br>54V<br>12 ~ 24V<br>15 ~ 30V<br>18 ~ 36V<br>21 ~ 42V<br>24 ~ 48V<br>27 ~ 54V<br>**EMC IMMUNITY**<br>**EMC EMISSION**<br>COLD START 35A(twidth=1800  s measured at 50% Ipeak) at 230VAC; Per NEMA 410<br>**TOTAL HARMONIC DISTORTION**<br>THD< 20% (@ load<br>40% / 115VAC,230VAC,277VAC)<br>≧<br>(Please refer to TOTAL HARMONIC DISTORTION (THD) section)<br>"<br>"<br>I/P-O/P:3.75KVAC     I/P-FG:2KVAC     O/P-FG:1.5KVAC<br>UL8750(type”HL”), CSA C22.2 No. 250.13-12; ENEC EN61347-1, EN61347-2-13 independent, EN62384; GB19510.14,<br>GB19510.1;IP65 or IP67,<br>,<br>;KC61347 1 KC61347 2 13<br>EAC TP TC 004<br>- ,<br>- -<br>AS/NZS IEC 61347.2.13:2013,AS/NZS 61347.1:2016<br>I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH<br>16ms     115VAC/230VAC<br>500ms, 80ms 115VAC/230VAC<br>90 ~ 305VAC          127 ~ 431VDC<br>(Please refer to "STATIC CHARACTERISTIC" section)<br>Tcase=-40 ~ +90℃ (Please refer to "OUTPUT LOAD vs TEMPERATURE" section)<br>Shut down output voltage, re-power on to recovery<br>Shut down output voltage, re-power on to recovery<br>**RATED CURRENT**<br>**RATED POWER**<br>**VOLTAGE ADJ. RANGE**<br>**RIPPLE & NOISE (max.)Note.2**<br>20A<br>16A<br>13.3A<br>11.4A<br>10A<br>8.9A<br>480W<br>480W<br>478.8W<br>478.8W<br>480W<br>480.6W<br>200mVp-p<br>200mVp-p<br>250mVp-p<br>250mVp-p<br>250mVp-p<br>350mVp-p<br>Adjustable for A/AB-Type only (via built-in potentiometer)<br>Adjustable for A/AB-Type only (via built-in potentiometer)<br>20.4 ~ 25.2V<br>25.5 ~ 31.5V<br>30.6 ~ 37.8V<br>35.7 ~ 44.1V<br>40.8 ~ 50.4V<br>45.9 ~ 56.7V<br>27 ~ 33V<br>33 ~ 40V<br>40 ~ 50V<br>46 ~ 55V<br>53 ~ 63V<br>60 ~ 70V<br>(Please refer to "<br>" section)<br>POWER FACTOR (PF) CHARACTERISTIC<br>**ISOLATION RESISTANCE**<br>**WITHSTAND VOLTAGE**<br>**TEMP. COEFFICIENT**<br>±0.02%/℃(0 ~ 60℃)<br>**PACKING**<br>2.8Kg;4pcs/12.2Kg/0.55CUFT<br>**NOTE**<br>℃ <br><br><br><br><br><br><br><br><br><br>℃<br><br>℃℃<br><br><br>μ<br>**EFFICIENCY**<br>**(Typ.)**<br>230VAC<br>277VAC<br>Compliance to EN55032 (CISPR32) Class B,EN55015, EN61000-3-2  Class C (@ load≧50%) ; EN61000-3-3;GB17743,<br>GB17625.1  EAC TP TC 020<br>,<br>;KC KN15,KN61547(<br>),J55015(H29)(for Blank/A-type)<br>except for AB,Dx,D2-type<br>Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge immunity Line-Earth 4KV, Line-Line 2KV),<br>EAC TP TC 020;KC KN15,KN61547(<br>),J55015(H29)(for Blank/A-type)<br>except for AB,Dx,D2-type<br>(except for AB,Dx,D2-type), J61347-1(H29), J61347-2-13(H29)(for Blank/A-type) approved|**CONSTANT CURRENT REGIONNote.4**<br>**MODEL**<br>**DC VOLTAGE**<br>**OUTPUT**<br>**CURRENT ADJ. RANGE**<br>**LINE REGULATION**<br>**LOAD REGULATION**<br>**SETUP, RISE TIMENote.6**<br>**HOLD UP TIME (Typ.)**<br>**VOLTAGE RANGENote.5**<br>**FREQUENCY RANGE**<br>**POWER FACTOR (Typ.)**<br>**AC CURRENT (Typ.)**<br>**INPUT**<br>**INRUSH CURRENT(Typ.)**<br>**LEAKAGE CURRENT**<br>**MAX. NO.** **of** **PSUs** **on** **16A**<br>**CIRCUIT** **BREAKER**<br>**SAFETY STANDARDS**<br>**WORKING TEMP.**<br>**WORKING HUMIDITY**<br>**MAX. CASE TEMP.**<br>**STORAGE TEMP., HUMIDITY**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**OVER CURRENT**<br>**OVER VOLTAGE**<br>**OVER TEMPERATURE**<br>47 ~ 63Hz<br>PF≧0.98/115VAC, PF≧0.97/230VAC, PF≧0.95/277VAC @ full load<br>5A / 115VAC          2.45A / 230VAC          2A / 277VAC<br><0.75mA / 277VAC<br>2unit(circuit breaker of type B) / 3units(circuit breaker of type C) at 230VAC<br>95 ~ 108%<br>Constant current limiting, recovers automatically after fault condition is removed<br>20 ~ 95% RH non-condensing<br>Tcase=+90℃<br>-40 ~ +80℃, 10 ~ 95% RH non-condensing<br>10 ~ 500Hz, 5G 12min./1cycle, period for  72min. each along X, Y, Z axes<br>345.5K hrs min.      Telcordia SR-332(Bellcore) ; 95.3K hrs min.      MIL-HDBK-217F (25℃)<br>262*125*43.8mm (L*W*H)<br>**VOLTAGE TOLERANCENote.3**<br>**ENVIRONMENT**<br>**SAFETY &**<br>**EMC**<br>**PROTECTION SHORT CIRCUIT**<br>Constant current limiting, recovers automatically after fault condition is removed<br>94%<br>94.5%<br>94.5%<br>95%<br>95%<br>95.5%<br>95%<br>95.5%<br>94.5%<br>95%<br>95%<br>95%<br>±1.0%<br>±1.0%<br>±1.0%<br>±1.0%<br>±1.0%<br>±1.0%<br>10 ~ 20A<br>8 ~ 16A<br>6.6 ~ 13.3A<br>5.7 ~ 11.4A<br>5 ~ 10A<br>4.4 ~ 8.9A<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>24V<br>**HLG-480H-24**<br>**HLG-480H-30**<br>**HLG-480H-36**<br>**HLG-480H-42**<br>**HLG-480H-48**<br>**HLG-480H-54**<br>30V<br>36V<br>42V<br>48V<br>54V<br>12 ~ 24V<br>15 ~ 30V<br>18 ~ 36V<br>21 ~ 42V<br>24 ~ 48V<br>27 ~ 54V<br>**EMC IMMUNITY**<br>**EMC EMISSION**<br>COLD START 35A(twidth=1800  s measured at 50% Ipeak) at 230VAC; Per NEMA 410<br>**TOTAL HARMONIC DISTORTION**<br>THD< 20% (@ load<br>40% / 115VAC,230VAC,277VAC)<br>≧<br>(Please refer to TOTAL HARMONIC DISTORTION (THD) section)<br>"<br>"<br>I/P-O/P:3.75KVAC     I/P-FG:2KVAC     O/P-FG:1.5KVAC<br>UL8750(type”HL”), CSA C22.2 No. 250.13-12; ENEC EN61347-1, EN61347-2-13 independent, EN62384; GB19510.14,<br>GB19510.1;IP65 or IP67,<br>,<br>;KC61347 1 KC61347 2 13<br>EAC TP TC 004<br>- ,<br>- -<br>AS/NZS IEC 61347.2.13:2013,AS/NZS 61347.1:2016<br>I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH<br>16ms     115VAC/230VAC<br>500ms, 80ms 115VAC/230VAC<br>90 ~ 305VAC          127 ~ 431VDC<br>(Please refer to "STATIC CHARACTERISTIC" section)<br>Tcase=-40 ~ +90℃ (Please refer to "OUTPUT LOAD vs TEMPERATURE" section)<br>Shut down output voltage, re-power on to recovery<br>Shut down output voltage, re-power on to recovery<br>**RATED CURRENT**<br>**RATED POWER**<br>**VOLTAGE ADJ. RANGE**<br>**RIPPLE & NOISE (max.)Note.2**<br>20A<br>16A<br>13.3A<br>11.4A<br>10A<br>8.9A<br>480W<br>480W<br>478.8W<br>478.8W<br>480W<br>480.6W<br>200mVp-p<br>200mVp-p<br>250mVp-p<br>250mVp-p<br>250mVp-p<br>350mVp-p<br>Adjustable for A/AB-Type only (via built-in potentiometer)<br>Adjustable for A/AB-Type only (via built-in potentiometer)<br>20.4 ~ 25.2V<br>25.5 ~ 31.5V<br>30.6 ~ 37.8V<br>35.7 ~ 44.1V<br>40.8 ~ 50.4V<br>45.9 ~ 56.7V<br>27 ~ 33V<br>33 ~ 40V<br>40 ~ 50V<br>46 ~ 55V<br>53 ~ 63V<br>60 ~ 70V<br>(Please refer to "<br>" section)<br>POWER FACTOR (PF) CHARACTERISTIC<br>**ISOLATION RESISTANCE**<br>**WITHSTAND VOLTAGE**<br>**TEMP. COEFFICIENT**<br>±0.02%/℃(0 ~ 60℃)<br>**PACKING**<br>2.8Kg;4pcs/12.2Kg/0.55CUFT<br>**NOTE**<br>℃ <br><br><br><br><br><br><br><br><br><br>℃<br><br>℃℃<br><br><br>μ<br>**EFFICIENCY**<br>**(Typ.)**<br>230VAC<br>277VAC<br>Compliance to EN55032 (CISPR32) Class B,EN55015, EN61000-3-2  Class C (@ load≧50%) ; EN61000-3-3;GB17743,<br>GB17625.1  EAC TP TC 020<br>,<br>;KC KN15,KN61547(<br>),J55015(H29)(for Blank/A-type)<br>except for AB,Dx,D2-type<br>Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge immunity Line-Earth 4KV, Line-Line 2KV),<br>EAC TP TC 020;KC KN15,KN61547(<br>),J55015(H29)(for Blank/A-type)<br>except for AB,Dx,D2-type<br>(except for AB,Dx,D2-type), J61347-1(H29), J61347-2-13(H29)(for Blank/A-type) approved|**CONSTANT CURRENT REGIONNote.4**<br>**MODEL**<br>**DC VOLTAGE**<br>**OUTPUT**<br>**CURRENT ADJ. RANGE**<br>**LINE REGULATION**<br>**LOAD REGULATION**<br>**SETUP, RISE TIMENote.6**<br>**HOLD UP TIME (Typ.)**<br>**VOLTAGE RANGENote.5**<br>**FREQUENCY RANGE**<br>**POWER FACTOR (Typ.)**<br>**AC CURRENT (Typ.)**<br>**INPUT**<br>**INRUSH CURRENT(Typ.)**<br>**LEAKAGE CURRENT**<br>**MAX. NO.** **of** **PSUs** **on** **16A**<br>**CIRCUIT** **BREAKER**<br>**SAFETY STANDARDS**<br>**WORKING TEMP.**<br>**WORKING HUMIDITY**<br>**MAX. CASE TEMP.**<br>**STORAGE TEMP., HUMIDITY**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**OVER CURRENT**<br>**OVER VOLTAGE**<br>**OVER TEMPERATURE**<br>47 ~ 63Hz<br>PF≧0.98/115VAC, PF≧0.97/230VAC, PF≧0.95/277VAC @ full load<br>5A / 115VAC          2.45A / 230VAC          2A / 277VAC<br><0.75mA / 277VAC<br>2unit(circuit breaker of type B) / 3units(circuit breaker of type C) at 230VAC<br>95 ~ 108%<br>Constant current limiting, recovers automatically after fault condition is removed<br>20 ~ 95% RH non-condensing<br>Tcase=+90℃<br>-40 ~ +80℃, 10 ~ 95% RH non-condensing<br>10 ~ 500Hz, 5G 12min./1cycle, period for  72min. each along X, Y, Z axes<br>345.5K hrs min.      Telcordia SR-332(Bellcore) ; 95.3K hrs min.      MIL-HDBK-217F (25℃)<br>262*125*43.8mm (L*W*H)<br>**VOLTAGE TOLERANCENote.3**<br>**ENVIRONMENT**<br>**SAFETY &**<br>**EMC**<br>**PROTECTION SHORT CIRCUIT**<br>Constant current limiting, recovers automatically after fault condition is removed<br>94%<br>94.5%<br>94.5%<br>95%<br>95%<br>95.5%<br>95%<br>95.5%<br>94.5%<br>95%<br>95%<br>95%<br>±1.0%<br>±1.0%<br>±1.0%<br>±1.0%<br>±1.0%<br>±1.0%<br>10 ~ 20A<br>8 ~ 16A<br>6.6 ~ 13.3A<br>5.7 ~ 11.4A<br>5 ~ 10A<br>4.4 ~ 8.9A<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>24V<br>**HLG-480H-24**<br>**HLG-480H-30**<br>**HLG-480H-36**<br>**HLG-480H-42**<br>**HLG-480H-48**<br>**HLG-480H-54**<br>30V<br>36V<br>42V<br>48V<br>54V<br>12 ~ 24V<br>15 ~ 30V<br>18 ~ 36V<br>21 ~ 42V<br>24 ~ 48V<br>27 ~ 54V<br>**EMC IMMUNITY**<br>**EMC EMISSION**<br>COLD START 35A(twidth=1800  s measured at 50% Ipeak) at 230VAC; Per NEMA 410<br>**TOTAL HARMONIC DISTORTION**<br>THD< 20% (@ load<br>40% / 115VAC,230VAC,277VAC)<br>≧<br>(Please refer to TOTAL HARMONIC DISTORTION (THD) section)<br>"<br>"<br>I/P-O/P:3.75KVAC     I/P-FG:2KVAC     O/P-FG:1.5KVAC<br>UL8750(type”HL”), CSA C22.2 No. 250.13-12; ENEC EN61347-1, EN61347-2-13 independent, EN62384; GB19510.14,<br>GB19510.1;IP65 or IP67,<br>,<br>;KC61347 1 KC61347 2 13<br>EAC TP TC 004<br>- ,<br>- -<br>AS/NZS IEC 61347.2.13:2013,AS/NZS 61347.1:2016<br>I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH<br>16ms     115VAC/230VAC<br>500ms, 80ms 115VAC/230VAC<br>90 ~ 305VAC          127 ~ 431VDC<br>(Please refer to "STATIC CHARACTERISTIC" section)<br>Tcase=-40 ~ +90℃ (Please refer to "OUTPUT LOAD vs TEMPERATURE" section)<br>Shut down output voltage, re-power on to recovery<br>Shut down output voltage, re-power on to recovery<br>**RATED CURRENT**<br>**RATED POWER**<br>**VOLTAGE ADJ. RANGE**<br>**RIPPLE & NOISE (max.)Note.2**<br>20A<br>16A<br>13.3A<br>11.4A<br>10A<br>8.9A<br>480W<br>480W<br>478.8W<br>478.8W<br>480W<br>480.6W<br>200mVp-p<br>200mVp-p<br>250mVp-p<br>250mVp-p<br>250mVp-p<br>350mVp-p<br>Adjustable for A/AB-Type only (via built-in potentiometer)<br>Adjustable for A/AB-Type only (via built-in potentiometer)<br>20.4 ~ 25.2V<br>25.5 ~ 31.5V<br>30.6 ~ 37.8V<br>35.7 ~ 44.1V<br>40.8 ~ 50.4V<br>45.9 ~ 56.7V<br>27 ~ 33V<br>33 ~ 40V<br>40 ~ 50V<br>46 ~ 55V<br>53 ~ 63V<br>60 ~ 70V<br>(Please refer to "<br>" section)<br>POWER FACTOR (PF) CHARACTERISTIC<br>**ISOLATION RESISTANCE**<br>**WITHSTAND VOLTAGE**<br>**TEMP. COEFFICIENT**<br>±0.02%/℃(0 ~ 60℃)<br>**PACKING**<br>2.8Kg;4pcs/12.2Kg/0.55CUFT<br>**NOTE**<br>℃ <br><br><br><br><br><br><br><br><br><br>℃<br><br>℃℃<br><br><br>μ<br>**EFFICIENCY**<br>**(Typ.)**<br>230VAC<br>277VAC<br>Compliance to EN55032 (CISPR32) Class B,EN55015, EN61000-3-2  Class C (@ load≧50%) ; EN61000-3-3;GB17743,<br>GB17625.1  EAC TP TC 020<br>,<br>;KC KN15,KN61547(<br>),J55015(H29)(for Blank/A-type)<br>except for AB,Dx,D2-type<br>Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge immunity Line-Earth 4KV, Line-Line 2KV),<br>EAC TP TC 020;KC KN15,KN61547(<br>),J55015(H29)(for Blank/A-type)<br>except for AB,Dx,D2-type<br>(except for AB,Dx,D2-type), J61347-1(H29), J61347-2-13(H29)(for Blank/A-type) approved|**HLG-480H-24**|**HLG-480H-30**|**HLG-480H-36**|**HLG-480H-42**|**HLG-480H-48**|**HLG-480H-54**|
|---|---|---|---|---|---|---|---|---|---|
|||**DC VOLTAGE**||24V|30V|36V|42V|48V|54V|
|||**CONSTANT CURRENT REGIONNote.4**||12 ~ 24V|15 ~ 30V|18 ~ 36V|21 ~ 42V|24 ~ 48V|27 ~ 54V|
|||**RATED CURRENT**||20A|16A|13.3A|11.4A|10A|8.9A|
|||**RATED POWER**||480W|480W|478.8W|478.8W|480W|480.6W|
|||**RIPPLE & NOISE (max.)Note.2**||200mVp-p|200mVp-p|250mVp-p|250mVp-p|250mVp-p|350mVp-p|
|||**VOLTAGE ADJ. RANGE**||Adjustable for A/AB-Type only (via built-in potentiometer)<br>20.4 ~ 25.2V<br>25.5 ~ 31.5V<br>30.6 ~ 37.8V<br>35.7 ~ 44.1V<br>40.8 ~ 50.4V<br>45.9 ~ 56.7V||||||
|||**CURRENT ADJ. RANGE**||10 ~ 20A<br>8 ~ 16A<br>6.6 ~ 13.3A<br>5.7 ~ 11.4A<br>5 ~ 10A<br>4.4 ~ 8.9A<br>Adjustable for A/AB-Type only (via built-in potentiometer)||||||
|||**VOLTAGE TOLERANCENote.3**||±1.0%|±1.0%|±1.0%|±1.0%|±1.0%|±1.0%|
|||**LINE REGULATION**||±0.5%|±0.5%|±0.5%|±0.5%|±0.5%|±0.5%|
|||**LOAD REGULATION**||±0.5%|±0.5%|±0.5%|±0.5%|±0.5%|±0.5%|
|||**SETUP, RISE TIMENote.6**||500ms, 80ms 115VAC/230VAC||||||
|||**HOLD UP TIME (Typ.)**||16ms     115VAC/230VAC||||||
|||**VOLTAGE RANGENote.5**||90 ~ 305VAC          127 ~ 431VDC<br>(Please refer to "STATIC CHARACTERISTIC" section)||||||
|||**FREQUENCY RANGE**||47 ~ 63Hz||||||
|||**POWER FACTOR (Typ.)**||PF≧0.98/115VAC, PF≧0.97/230VAC, PF≧0.95/277VAC @ full load<br>(Please refer to "<br>" section)<br>POWER FACTOR (PF) CHARACTERISTIC||||||
|||**TOTAL HARMONIC DISTORTION**||THD< 20% (@ load<br>40% / 115VAC,230VAC,277VAC)<br>≧<br>(Please refer to TOTAL HARMONIC DISTORTION (THD) section)<br>"<br>"||||||
|||**EFFICIENCY**<br>**(Typ.)**|230VAC<br>277VAC|94%<br>94.5%|94.5%<br>95%|95%<br>95.5%|95%<br>95.5%|94.5%<br>95%|95%<br>95%|
|||**AC CURRENT (Typ.)**||5A / 115VAC          2.45A / 230VAC          2A / 277VAC||||||
|||**INRUSH CURRENT(Typ.)**||COLD START 35A(twidth=1800  s measured at 50% Ipeak) at 230VAC; Per NEMA 410<br>μ||||||
|||**LEAKAGE CURRENT**||<0.75mA / 277VAC||||||
|||**MAX. NO.** **of** **PSUs** **on** **16A**<br>**CIRCUIT** **BREAKER**||2unit(circuit breaker of type B) / 3units(circuit breaker of type C) at 230VAC||||||
|||**OVER CURRENT**||95 ~ 108%<br>Constant current limiting, recovers automatically after fault condition is removed||||||
|||**SHORT CIRCUIT**||Constant current limiting, recovers automatically after fault condition is removed||||||
|||**OVER VOLTAGE**<br>||Shut down output voltage, re-power on to recovery<br>27 ~ 33V<br>33 ~ 40V<br>40 ~ 50V<br>46 ~ 55V<br>53 ~ 63V<br>60 ~ 70V||||||
|||**OVER TEMPERATURE**||Shut down output voltage, re-power on to recovery||||||
|||**WORKING TEMP.**||Tcase=-40 ~ +90℃ (Please refer to "OUTPUT LOAD vs TEMPERATURE" section)||||||
|||**MAX. CASE TEMP.**||Tcase=+90℃||||||
|||**WORKING HUMIDITY**||20 ~ 95% RH non-condensing||||||
|||**STORAGE TEMP., HUMIDITY**||-40 ~ +80℃, 10 ~ 95% RH non-condensing||||||
|||**TEMP. COEFFICIENT**||±0.02%/℃(0 ~ 60℃)||||||
|||**VIBRATION**||10 ~ 500Hz, 5G 12min./1cycle, period for  72min. each along X, Y, Z axes||||||
|||**SAFETY STANDARDS**||UL8750(type”HL”), CSA C22.2 No. 250.13-12; ENEC EN61347-1, EN61347-2-13 independent, EN62384; GB19510.14,<br>GB19510.1;IP65 or IP67,<br>,<br>;KC61347 1 KC61347 2 13<br>EAC TP TC 004<br>- ,<br>- -<br>AS/NZS IEC 61347.2.13:2013,AS/NZS 61347.1:2016<br>(except for AB,Dx,D2-type), J61347-1(H29), J61347-2-13(H29)(for Blank/A-type) approved||||||
|||**WITHSTAND VOLTAGE**||I/P-O/P:3.75KVAC     I/P-FG:2KVAC     O/P-FG:1.5KVAC||||||
|||**ISOLATION RESISTANCE**||I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH||||||
|||**EMC EMISSION**||Compliance to EN55032 (CISPR32) Class B,EN55015, EN61000-3-2  Class C (@ load≧50%) ; EN61000-3-3;GB17743,<br>GB17625.1  EAC TP TC 020<br>,<br>;KC KN15,KN61547(<br>),J55015(H29)(for Blank/A-type)<br>except for AB,Dx,D2-type||||||
|||**EMC IMMUNITY**||Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge immunity Line-Earth 4KV, Line-Line 2KV),<br>EAC TP TC 020;KC KN15,KN61547(<br>),J55015(H29)(for Blank/A-type)<br>except for AB,Dx,D2-type||||||
|||**MTBF**||345.5K hrs min.      Telcordia SR-332(Bellcore) ; 95.3K hrs min.      MIL-HDBK-217F (25℃)||||||
|||**DIMENSION**||262*125*43.8mm (L*W*H)||||||
|||**PACKING**||2.8Kg;4pcs/12.2Kg/0.55CUFT||||||
|||℃ <br><br><br><br><br><br><br><br><br><br>℃<br><br>℃℃<br><br>||||||||



_File Name:HLG-480H-SPEC   2020-03-30_ 

## 480W  Constant Voltage + Constant Current LED Driver **HLG - 480H series** 

## **BLOCK DIAGRAM** 

**==> picture [485 x 137] intentionally omitted <==**

**----- Start of picture text -----**<br>
PFC fosc : 45KHz<br>PWM fosc : 55KHz<br>EMI FILTER PFC POWER RECTIFIERS Vo+<br>I/P & CIRCUIT SWITCHING & Vo-<br>RECTIFIERS FILTER<br>O.L.P. DIM+<br>DIM-<br>(B Type)<br>DETECTION<br>FG O.L.P.<br>PWM CIRCUIT<br>PFC CONTROL<br>CONTROL<br>O.T.P. O.V.P.<br>**----- End of picture text -----**<br>


## **DRIVING METHODS OF LED MODULE** 

- ※ This series is able to work in either Constant Current mode (a direct drive way) or Constant Voltage mode (usually through additional DC/DC driver) to drive the LEDs. 

**==> picture [442 x 148] intentionally omitted <==**

**----- Start of picture text -----**<br>
In the constant current region, the highest voltage at the output of the driver<br>100<br>depends on the configuration of the end systems.<br>Should there be any compatibility issues, please contact MEAN WELL.<br>(A) Constant (B)<br>Voltage area Constant<br>Current area<br>50<br>50 100 Io (%)<br>Typical output current normalized by rated current (%)<br>Vo(%)<br>**----- End of picture text -----**<br>


_File Name:HLG-480H-SPEC   2020-03-30_ 

## 480W  Constant Voltage + Constant Current LED Driver **HLG - 480H  series** 

## **DIMMING OPERATION** 

**==> picture [505 x 304] intentionally omitted <==**

**----- Start of picture text -----**<br>
For 24V,30V,36V,42V<br>Vo+(Red)<br>FG   (Green/Yellow) Vo-(Black)<br>Vo+(Red)<br>AC/L(Brown)<br>AC/N(Blue) Vo-(Black)<br>DIM+(Blue)<br>DIM-(White)<br>* DIM+ for B/AB-Type<br>   PROG+ for D2-Type<br>* *DIM- for B/AB-Type<br>    PROG- for D2-Type<br>For 48V,54V<br>FG   (Green/Yellow)<br>Vo+(Red)<br>AC/L(Brown)<br>AC/N(Blue) Vo-(Black)<br>DIM+(Blue)<br>DIM-(White)<br>* DIM+ for B/AB-Type<br>   PROG+ for D2-Type<br>* *DIM- for B/AB-Type<br>    PROG- for D2-Type<br>**----- End of picture text -----**<br>


## ※ **3 in 1 dimming function (for B/AB-Type)** 

- ‧Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 

- 0 ~ 10VDC, or 10V PWM signal or resistance. 

- ‧Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers. 

- ‧Dimming source current from power supply: 100μA (typ.) ◎ Applying additive 0 ~ 10VDC 

**==> picture [215 x 96] intentionally omitted <==**

**----- Start of picture text -----**<br>
+<br>Vo+ +<br>-<br>Vo- -<br>DIM+<br>+<br>Additive Voltage<br>-<br>DIM-<br>“DO NOT connect "DIM- to Vo-"<br>**----- End of picture text -----**<br>


**==> picture [157 x 146] intentionally omitted <==**

**----- Start of picture text -----**<br>
100%<br>90%<br>80%<br>70%<br>60%<br>50%<br>40%<br>30%<br>20%<br>10%<br>0%<br>0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V<br>Dimming input: Additive voltage<br>Output current (%)<br>**----- End of picture text -----**<br>


_File Name:HLG-480H-SPEC   2020-03-30_ 

## 480W  Constant Voltage + Constant Current LED Driver **HLG - 480H  series** 

**==> picture [227 x 129] intentionally omitted <==**

**----- Start of picture text -----**<br>
◎ Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz):<br>+<br>Vo+ +<br>-<br>Vo- -<br>DIM+<br>Additive PWM signal<br>DIM-<br>“DO NOT connect "DIM- to Vo+"<br>**----- End of picture text -----**<br>


**==> picture [224 x 125] intentionally omitted <==**

**----- Start of picture text -----**<br>
◎  Applying additive resistance:<br>+<br>Vo+ +<br>-<br>Vo- -<br>DIM+<br>Additive Resistance<br>DIM-<br>“DO NOT connect "DIM- to Vo-"<br>**----- End of picture text -----**<br>


**==> picture [172 x 384] intentionally omitted <==**

**----- Start of picture text -----**<br>
100%<br>90%<br>80%<br>70%<br>60%<br>50%<br>40%<br>30%<br>20%<br>10%<br>0%<br>0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%<br>Duty cycle of additive 10V PWM signal dimming input<br>100%<br>90%<br>80%<br>70%<br>60%<br>50%<br>40%<br>30%<br>20%<br>10%<br>0%<br>Short 10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N<br>(N=driver quantity for synchronized dimming operation)<br>Dimming input: Additive resistance<br>Output current (%)<br>Output current (%)<br>**----- End of picture text -----**<br>


Note : 1. Min. dimming level is about 6% and the output current is not defined when 0%< Iout<6%. 2. The output current could drop down to 0% when dimming input is about 0kΩ or 0Vdc, or 10V PWM signal with 0% duty cycle. 

_File Name:HLG-480H-SPEC   2020-03-30_ 

> 480W  Constant Voltage + Constant Current LED Driver **HLG - 480H  series** 

**==> picture [478 x 172] intentionally omitted <==**

**----- Start of picture text -----**<br>
※  Smart timer dimming function (for Dxx-Type  by User definition)<br>     MEAN WELL Smart timer dimming primarily provides the adaptive proportion dimming profile for the output constant current level to perform up to 14<br>     consecutive hours. 3 dimming profiles hereunder are defined accounting for the most frequently seen applications. If other options may be needed,<br>     please contact MEAN WELL for details.<br>Ex : ◎ D01-Type: the profile recommended for residential lighting<br>100<br>- | Set up for D01-Type in Smart timer dimming software program:<br>|<br>ie ft fT<br>eoa LILI T1 T2 T3 T4<br>TIME** 06:00 07:00 11:00 ---<br>50<br>40 LEVEL** 100% 70% 50% 70%<br>30<br>Dimming Level(%)<br>**----- End of picture text -----**<br>


## Operating Time(HH:MM) 

**: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level. Example: If a residential lighting application adopts D01-Type, when turning on the power supply at 6:00pm, for instance: [1] The power supply will switch to the constant current level at 100% starting from 6:00pm. 

[2] The power supply will switch to the constant current level at 70% in turn, starting from 0:00am, which is 06:00 after the power supply turns on. [3] The power supply will switch to the constant current level at 50% in turn, starting from 1:00am, which is 07:00 after the power supply turns on. [4] The power supply will switch to the constant current level at 70% in turn, starting from 5:00am, which is 11:00 after the power supply turns on. The constant current level remains till 8:00am, which is 14:00 after the power supply turns on. 

**==> picture [192 x 120] intentionally omitted <==**

**----- Start of picture text -----**<br>
Ex: ◎ D02-Type: the profile recommended for street lighting<br>100<br>i<br>&0<br>70<br>60<br>50<br>Dimming Level(%) 30<br>**----- End of picture text -----**<br>


||T1|T2|T3|T4|T5|
|---|---|---|---|---|---|
|TIME**|01:00|03:00|8:00|11:00|---|
|LEVEL**|50%|80%|100%|60%|80%|



Operating Time(HH:MM) 

- **: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level. Example: If a street lighting application adopts D02-Type, when turning on the power supply at 5:00pm, for instance: [1] The power supply will switch to the constant current level at 50% starting from 5:00pm. 

- [2] The power supply will switch to the constant current level at 80% in turn, starting from 6:00pm, which is 01:00 after the power supply turns on. [3] The power supply will switch to the constant current level at 100% in turn, starting from 8:00pm, which is 03:00 after the power supply turns on. [4] The power supply will switch to the constant current level at 60% in turn, starting from 1:00am, which is 08:00 after the power supply turns on. [5] The power supply will switch to the constant current level at 80% in turn, starting from 4:00am, which is 11:00 after the power supply turns on. The constant current level remains till 6:30am, which is 14:00 after the power supply turns on. 

_File Name:HLG-480H-SPEC   2020-03-30_ 

## 480W  Constant Voltage + Constant Current LED Driver **HLG - 480H  series** 

|Ex:|Ex:◎D03-Type: the profile recommended for tunnel lighting|||||||
|---|---|---|---|---|---|---|---|
||100|||||||
||90|Set up for D03-Type in Smart timer dimming software program:||||||
||80|||||||
|Dimming Level(%)|70<br>60<br>50<br>40<br>30<br>20||TIME**<br>LEVEL**|01:30<br>T1<br>70%|T2<br>11:00<br>100%|T3<br>---<br>70%||



Operating Time(HH:MM) 

**: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level. Example: If a tunnel lighting application adopts D03-Type, when turning on the power supply at 4:30pm, for instance: [1] The power supply will switch to the constant current level at 70% starting from 4:30pm. 

[2] The power supply will switch to the constant current level at 100% in turn, starting from 6:00pm, which is 01:30 after the power supply turns on. [3] The power supply will switch to the constant current level at 70% in turn, starting from 5:00am, which is 11:00 after the power supply turns on. The constant current level remains till 6:30am, which is 14:00 after the power supply turns on. 

_File Name:HLG-480H-SPEC   2020-03-30_ 

## 480W  Constant Voltage + Constant Current LED Driver **HLG - 480H  series** 

## **OUTPUT LOAD vs TEMPERATURE(Note.10)** 

**==> picture [493 x 401] intentionally omitted <==**

**----- Start of picture text -----**<br>
Above 230VAC<br>100 100<br>80 80<br>60 110VAC 60<br>40 40<br>20 20<br>-40 -25 -10 0 15 30 50 60 65 70 (HORIZONTAL) -40 -25 0 20 45 55 65 75 90 (HORIZONTAL)<br>AMBIENT TEMPERATURE,Ta ( ℃ ) Tcase ( ℃ )<br>◎ If�HLG-480H�operates�in�constant�current�mode�with�the�rated�<br>current,�the�maximum�workable�Ta�is�60 ℃ .(Typ.�230VAC)<br>STATIC CHARACTERISTICS POWER FACTOR(PF) CHARACTERISTIC<br>※ Tcase at 75 ℃<br>100<br>Constant Current Mode<br>90<br>1.05<br>80 1.00<br>0.95<br>70 0.90<br>0.85<br>60<br>0.80 277VAC<br>50 0.75<br>230VAC<br>0.70<br>40 0.65 115VAC<br>0.60<br>90 110 125 135 145 155 165 175 180 200 230 305 0.55<br>10% 20% 30% 40% 50% 60% 70% 80% 90% 100%<br>INPUT VOLTAGE (V) 60Hz (480W)<br>LOAD<br>LOAD (%) LOAD (%)<br>PF<br>LOAD (%)<br>**----- End of picture text -----**<br>


## **TOTAL HARMONIC DISTORTION (THD)** 

※ 42V Model, Tcase at 75℃ 

**==> picture [235 x 112] intentionally omitted <==**

**----- Start of picture text -----**<br>
35<br>30<br>25<br>20<br>277VAC<br>15<br>230VAC<br>10<br>115VAC<br>5<br>0<br>10% 20% 30% 40% 50% 60% 70% 80% 90% 100%<br>THD(%)<br>**----- End of picture text -----**<br>


## **EFFICIENCY vs LOAD** 

**==> picture [241 x 146] intentionally omitted <==**

**----- Start of picture text -----**<br>
HLG-480H series possess superior working efficiency that up to 95.5%<br>can be reached in field applications.<br>※ 42V Model, Tcase at 75℃<br>98<br>96<br>94<br>92<br>90<br>277VAC<br>88<br>86 230VAC<br>84 115VAC<br>82<br>80<br>10% 20% 30% 40% 50% 60% 70% 80% 90% 100%<br>EFFICIENCY (%)<br>**----- End of picture text -----**<br>


**==> picture [20 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
LOAD<br>**----- End of picture text -----**<br>


**==> picture [20 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
LOAD<br>**----- End of picture text -----**<br>


_File Name:HLG-480H-SPEC   2020-03-30_ 

> 480W  Constant Voltage + Constant Current LED Driver **HLG - 480H  series** 

## **LIFE TIME** 

**==> picture [307 x 219] intentionally omitted <==**

**----- Start of picture text -----**<br>
120<br>100<br>80<br>60<br>40<br>20<br>0<br>25 30 35 40 45 50 55 60 65 70 75 80 85 90<br>Tcase �(�����) ℃<br>LIFETIME(Kh)<br>**----- End of picture text -----**<br>


_File Name:HLG-480H-SPEC   2020-03-30_ 

## 480W  Constant Voltage + Constant Current LED Driver **HLG - 480H  series** 

**==> picture [511 x 668] intentionally omitted <==**

**----- Start of picture text -----**<br>
MECHANICAL SPECIFICATION Case No. 251           Unit:mm<br>※ Blank-Type<br>For 24V,30V,36V,42V<br>262<br>13.4 235.2<br>8.9<br>ψ4.5×4PL<br>300±20<br>tc 113.8 Vo+(Red)<br>FG   (Green/Yellow) 300±20 SJOW 17AWG×2C  05RN-F & 2×1.0mm  2 Vo-(Black)<br>Vo+(Red)<br>AC/L(Brown)AC/N(Blue) SJOW 17AWG×3C & H05RN-F 3×1.0mm  2 SJOW 17AWG×2C  05RN-F & 2×1.0mm  2 Vo-(Black)<br>‧     : Max. Case Temperaturetc<br>For 48V,54V<br>262<br>13.4 235.2<br>8.9<br>ψ4.5×4PL<br>tc 113.8<br>300±20<br>300±20<br>FG   (Green/Yellow)<br>Vo+(Red)<br>AC/L(Brown)<br>AC/N(Blue) SJOW 17AWG×3C & H05RN-F 3×1.0mm  2 SJOW 17AWG×2C  05RN-F & 2×1.0mm  2 Vo-(Black)<br>‧     : Max. Case Temperaturetc<br>15<br>78 125<br>58<br>15<br>43.8<br>15<br>78 125<br>58<br>15<br>43.8<br>**----- End of picture text -----**<br>


_File Name:HLG-480H-SPEC   2020-03-30_ 

> 480W  Constant Voltage + Constant Current LED Driver **HLG - 480H  series** 

**==> picture [511 x 668] intentionally omitted <==**

**----- Start of picture text -----**<br>
※ A-Type<br>For 24V,30V,36V,42V<br>262<br>13.4 235.2<br>8.9<br>ψ4.5×4PL<br>300±20<br>tc 113.8 Vo+(Red)<br>FG   (Green/Yellow) 300±20 Vo Io SJOW 17AWG×2C  05RN-F & 2×1.0mm  2 Vo-(Black)Vo+(Red)<br>AC/L(Brown)AC/N(Blue) SJOW 17AWG×3C & H05RN-F 3×1.0mm  2 ADJ. ADJ. SJOW 17AWG×2C  05RN-F & 2×1.0mm  2 Vo-(Black)<br>‧     : Max. Case Temperaturetc<br>For 48V,54V<br>262<br>13.4 235.2<br>8.9<br>ψ4.5×4PL<br>tc 113.8<br>300±20<br>300±20<br>FG   (Green/Yellow) Vo Io Vo+(Red)<br>AC/L(Brown)AC/N(Blue) SJOW 17AWG×3C & H05RN-F 3×1.0mm  2 ADJ. ADJ. SJOW 17AWG×2C  05RN-F & 2×1.0mm  2 Vo-(Black)<br>‧     : Max. Case Temperaturetc<br>15<br>78 125<br>58<br>15<br>43.8<br>15<br>78 125<br>58<br>15<br>43.8<br>**----- End of picture text -----**<br>


_File Name:HLG-480H-SPEC   2020-03-30_ 

## 480W  Constant Voltage + Constant Current LED Driver **HLG - 480H  series** 

**==> picture [511 x 668] intentionally omitted <==**

**----- Start of picture text -----**<br>
※ B/D2-Type<br>For 24V,30V,36V,42V<br>262<br>13.4 235.2<br>8.9<br>ψ4.5×4PL<br>300±20<br>tc 113.8 Vo+(Red)<br>FG   (Green/Yellow) 300±20 SJOW 17AWG×2C  05RN-F & 2×1.0mm  2 Vo-(Black)<br>Vo+(Red)<br>AC/L(Brown)AC/N(Blue) SJOW 17AWG×3C & H05RN-F 3×1.0mm  2 SJOW 17AWG×2C  05RN& -F 2×1.0mm  2 Vo-(Black)DIM+(Blue)<br>UL2517 20AWG*2C DIM-(White)<br>330±20<br>‧     : Max. Case Temperaturetc<br>For 48V,54V<br>262<br>13.4 235.2<br>8.9<br>ψ4.5×4PL<br>tc 113.8<br>300±20<br>300±20<br>FG   (Green/Yellow)<br>Vo+(Red)<br>AC/L(Brown)AC/N(Blue) SJOW 17AWG×3C & H05RN-F 3×1.0mm  2 SJOW 17AWG×2C  05RN-F & 2×1.0mm  2 Vo-(Black)DIM+(Blue)<br>UL2517 20AWG*2C DIM-(White)<br>330±20<br>‧     : Max. Case Temperaturetc<br>15<br>78 125<br>58<br>15<br>43.8<br>15<br>78 125<br>58<br>15<br>43.8<br>**----- End of picture text -----**<br>


_File Name:HLG-480H-SPEC   2020-03-30_ 

## 480W  Constant Voltage + Constant Current LED Driver **HLG - 480H  series** 

**==> picture [511 x 668] intentionally omitted <==**

**----- Start of picture text -----**<br>
※ AB-Type<br>For 24V,30V,36V,42V<br>262<br>13.4 235.2<br>8.9<br>ψ4.5×4PL<br>300±20<br>tc 113.8 Vo+(Red)<br>FG   (Green/Yellow) 300±20 Vo Io SJOW 17AWG×2C  05RN-F & 2×1.0mm  2 Vo-(Black)Vo+(Red)<br>AC/L(Brown)AC/N(Blue) SJOW 17AWG×3C & H05RN-F 3×1.0mm  2 ADJ. ADJ. SJOW 17AWG×2C  05RN& -F 2×1.0mm  2 Vo-(Black)DIM+(Blue)<br>UL2517 20AWG*2C DIM-(White)<br>330±20<br>‧     : Max. Case Temperaturetc<br>For 48V,54V<br>262<br>13.4 235.2<br>8.9<br>ψ4.5×4PL<br>tc 113.8<br>300±20<br>300±20<br>FG   (Green/Yellow) Vo Io Vo+(Red)<br>AC/L(Brown)AC/N(Blue) SJOW 17AWG×3C & H05RN-F 3×1.0mm  2 ADJ. ADJ. SJOW 17AWG×2C  05RN-F & 2×1.0mm  2 Vo-(Black)DIM+(Blue)<br>UL2517 20AWG*2C DIM-(White)<br>330±20<br>‧     : Max. Case Temperaturetc<br>15<br>78 125<br>58<br>15<br>43.8<br>15<br>78 125<br>58<br>15<br>43.8<br>**----- End of picture text -----**<br>


_File Name:HLG-480H-SPEC   2020-03-30_ 

## 480W  Constant Voltage + Constant Current LED Driver **HLG - 480H  series** 

**==> picture [490 x 287] intentionally omitted <==**

**----- Start of picture text -----**<br>
※  Junction Box Option<br>235.2 76 10<br>397.2 5<br>FG  Vo+<br>AC/L Vo-<br>AC/N<br>2-ψ5<br>3- PF 1/2" 3- PF 1/2"<br>150±20 150±20<br>86<br>◎ Junction box option is available for all types. Please contact MEAW WELL for details.<br>6<br>8.5<br>1<br>6 32<br>125<br>8.5<br>35 43.8<br>**----- End of picture text -----**<br>


## **INSTALLATION MANUAL** 

Please refer to : http://www.meanwell.com/manual.html 

_File Name:HLG-480H-SPEC   2020-03-30_