HG3514DP

3300 MHz to 4200 MHz VH Dual Polarization Flat Panel, 

14 dBi gain, Ruggedized, 2 X N Female Connectors 

## **HG3514DP** 

## **Features** 

- Dual Polarity feed system in single enclosure 

- Includes tilt and swivel mast mounting 

   - UV-resistant radome for all-weather operation 

   - MIMO - Multiple-Input and Multiple-Output 

- Two integral N-Female connectors 

## **Applications** 

- 3.5 GHz Band Applications 

- SOFDMA 

   - Wireless Internet Provider “cell” sites 

   - Wireless LAN systems & IEEE 802.16e Applications 

- CBRS and Extended CBRS 

## **Description** 

The L-com HG3514DP is a high performance flat panel antenna engineered for superior performance and specifically designed for rugged environments with a low profile aesthetically pleasing design. L-com’s HG3514DP has 14 dBi gain. Measuring 7.5” x 7.5” this antenna is extremely compact and toughened to stand up to all environments. The HG3514DP operates from 3500 to 4200 MHz which is ideal for Point to Point applications where form factor is a concern and coverage of extended CBRS is necessary. 

The HG3514DP from L-com has 45° Horizontal Beamwidth and 40° Vertical Beamwidth patterns with Vertical + Horizontal polarization and features 2 x Type N Female connectors. The 3500-4200 MHz HG3514DP can be used with APs and Routers with 1 or 2 antenna ports. This antenna incorporates advanced dual polarization technology that allows for the interoperability of two radios transmit and receive paths. This technology allows for the attenuation of unwanted signals from adjacent channels and/or co-located equipment. 

The 2 x Type N Female connectorized HG3514DP antenna from L-com has mounting bracket and hardware included which makes this antenna very easy to install. This high performance flat panel antenna just like our wide selection of superior quality RF parts, ship same day. Contact our knowledgeable and friendly technical support and sales staff for your answers on antennas or other L-com products. 

## **Configuration** 

Design Flat Panel Band Type Single Radiation Pattern Directional Polarization Vertical/Horizontal Connector Type N Female Number of Ports 2 

## **Electrical Specifications** 

|~~**Description**~~|~~**Minimum**~~|~~**Typical**~~|~~**Maximum**~~|~~**Units**~~|
|---|---|---|---|---|
|Frequency Range|3.3||4.2|GHz|
|Input VSWR|||2:1||
|Impedance||50||Ohms|
|Gain||15||dBi|
|Front to Back Ratio|25|||dB|



Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 3300 MHz to 4200 MHz VH Dual Polarization Flat Panel, 14 dBi gain, Ruggedized, 2 X N Female Connectors HG3514DP 

HG3514DP REV 1 | © 2020 Infinite Electronics, Inc. L-com is a registered trademark of Infinite Electronics, Inc. USA & Canada **+1(800) 341-5266 |** International **+1(978) 682-6936 | L-com.com** 

1 

3300 MHz to 4200 MHz VH Dual Polarization Flat Panel, 

14 dBi gain, Ruggedized, 2 X N Female Connectors 

## **HG3514DP** 

|Port to Port Isolation|25||dB|
|---|---|---|---|
|Horizontal Beamwidth|40|50|Degrees|
|Vertical Beamwidth|35|45|Degrees|
|Input Power||20|Watts|



**.** 

## **Mechanical Specifications** 

Radome Material UV Resistant ABS **Size** Length 7.4 in [187.96 mm] Width 2.1 in [53.34 mm] Height 7.4 in [187.96 mm] Mounting Mast Diameter 1.57 to 1.97 in [39.88 to 50.04 mm] Weight 1.98 lbs [898.11 g] 

## **Environmental Specifications** 

**Temperature** Operating Range -40 to +70 deg C Wind Survivability 124.27 MPH [199.99 KPH] Humidity 5 to 95 

**Compliance Certifications** (see product page for current document) 

## **Plotted and Other Data** 

Notes: 

3300 MHz to 4200 MHz VH Dual Polarization Flat Panel, 14 dBi gain, Ruggedized, 2 X N Female Connectors from L-com has same day shipment for domestic and International orders. Our portfolio includes coaxial cable assemblies, connectors, adapters and custom products as well as lightning and surge protectors, NEMA rated enclosures, and an RF product line which includes antennas, amplifiers, passive, and active components. 

The information contained within this document is accurate to the best of our knowledge and representative of the part described herein.  It may be necessary to make modifications to the part and/or the documentation of the part in order to impliment improvements.  L-com reserves the right to make such changes as required.  Unless otherwise stated, all specifications are nominal.  L-com does not make any representation or warranty regarding the suitability of the part described herein for any particular purpose, and L-com does not assume liability arising out of the use of any part or document. 

HG3514DP REV 1 | © 2020 Infinite Electronics, Inc. L-com is a registered trademark of Infinite Electronics, Inc. USA & Canada **+1(800) 341-5266 |** International **+1(978) 682-6936 | L-com.com** 

2 

3300 MHz to 4200 MHz VH Dual Polarization Flat Panel, 14 dBi gain, Ruggedized, 2 X N Female Connectors 

## **L-com CAD Drawing** 

**==> picture [480 x 602] intentionally omitted <==**

**----- Start of picture text -----**<br>
:| Eni|<br>ye yoo<br>rT if<br>we (AI<br>—<br>Ifo<br>|<br>1 A<br>REV<br> APPROVED KHIETPAS N/A<br>1<br>THE INFORMATION AND  DESIGN IN THIS DOCUMENT IS THE PROPERTY OF   ALL RIGHTS RESERVED.<br>DATE THIRD-ANGLE PROJECTION L-COM GLOBAL CONNECTIVITY.  SHEET                     OF SCALE<br>04/22/2021<br>HG3514DP<br>REVISIONS LABEL PER ILS-100-03 (SEE NOTE 1) ITEM NO.<br>2.00 50.8 DRAIN HOLE<br> DESCRIPTION INITIAL RELEASE<br>2.00 50.8 DRAWN BY BPUCHASKI<br>Fax:  1.978.689.9484<br>Website: www.L-com.com<br>A North Andover, MA 01845 USA.<br>REV. E-mail: CustomerService@L-com.com CAGE CODE         43321<br>Phone:  1.800.341.5266 │ 1.978.682.6936<br>50 High Street, West Mill, 3rd Floor, Suite #30  SIZE A<br>°<br>± 1/32<br>FRACTIONS ANGLES ± 1<br> 2.291<br>CONNECTOR<br>2X TYPE N-FEMALE<br>.6 15 TOLERANCES:<br>.2     [5.08] .02   [ .51 ] .005 [ .13 ]<br>ALL DIMENSIONS SHOWN<br>ARE FOR REFERENCE ONLY.<br>UNLESS OTHERWISE SPECIFIED LEADING DIMENSIONS ARE INCHES DIMENSIONS IN [ ] ARE MILLIMETERS .X = ± .XX = ± .XXX = ± CABLE LENGTH (L) TOLERANCES:                          L ≤ 12 [305] = +1 [25] / -0       12 [305] < L ≤ 60 [1524] = +2 [51] / -0   60 [1524] < L ≤ 120 [3048] = +4 [102] / -0 120 [3048] < L ≤ 300 [7620] = +6 [152] / -0                      300 [7620] < L = +5%L / -0<br>1.5 39<br>7.4 189<br>7.4 189<br>WITH THE EXPORT ADMINISTRATION REGULATIONS. DIVERSION CONTRARY TO U.S. LAW PROHIBITED.<br>NOTES: 1. LABEL PER ILS-100-03 (FOR INTERNAL REFERENCE ONLY)     LABEL LOCATION FOR REFERENCE ONLY<br>THESE COMMODITIES, TECHNOLOGY OR SOFTWARE WERE EXPORTED FROM THE UNITED STATES IN ACCORDANCE<br>T-Rev.D<br>**----- End of picture text -----**<br>


1 REV 1 | © 2020 Infinite Electronics, Inc. L-com is a registered trademark of Infinite Electronics, Inc. USA & Canada **+1(800) 341-5266 |** International **+1(978) 682-6936 | l-com.com** 

3