HE05-1A83-150

**A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components** 

## **HE Series Reed Relays** 

- Features: High Voltage Relay, Through-Hole / Axial Wire Option, Compact Design, Special Pin-Outs 

- Applications: High Voltage Test Sets, Cable Testers, Medical Equipment & Others 

- Markets: Medical, Test and Measurement & Others 

## **Part Description: H E  0 0 - 0 X - 0 0 - 0 0** 

|**Customer Options**<br>~~aee~~|**Switch Model**<br>~~ee~~|**Switch Model**<br>~~ee~~|**Unit**|
|---|---|---|---|
|**Contact Data**<br>~~aee~~|**69**<br>~~ee~~<br>~~es~~|**83**<br>~~ee~~||
|**Rated Power (max.)**<br>AnyDC combination of V&A not to exceed their individual  max.’s<br>~~ee~~<br>~~es~~|50<br>~~ee~~<br>~~es~~<br>~~es~~|50<br>~~ee~~<br>~~es~~|W<br>~~es~~|
|**Switching Voltage (max.)**<br>DC orpeak AC<br>~~es~~<br>~~ee~~|10,000<br>~~es~~<br>~~es~~<br>~~ee~~|7,500<br>~~es~~<br>~~ee~~|V<br>~~es~~<br>~~ee~~|
|**Switching Current (max.)**<br>DC orpeak AC<br>~~es~~<br>~~ee~~|3.0<br>~~es~~<br>~~ee~~|3.0<br>~~es~~<br>~~ee~~|A<br>~~es~~|
|**Carry Current (max.)**<br>DC orpeak AC<br>~~es~~<br>~~ee~~|5.0<br>~~es~~<br>~~ee~~|5.0<br>~~es~~<br>~~ee~~|A<br>~~es~~|
|**Contact Resistance (max.)**<br>@0.5V & 50mA<br>~~ee ~~<br>~~es~~|150<br> ~~ee~~<br>~~es~~<br>~~ee~~|150<br>~~ee~~<br>~~es~~<br>~~ee~~|mOhm<br>~~es~~|
|**Breakdown Voltage (min.)**<br>Accordingto EN60255-5<br>~~es~~<br>~~ee~~|15<br>~~es~~<br>~~ee~~<br>~~ee~~<br>~~es~~|10<br>~~es~~<br>~~ee~~<br>~~ee~~|kVDC<br>~~es~~<br>~~ee~~|
|**Operating Time (max.)**<br>Incl. Bounce;Measured with w/Nominal Voltage<br>~~es~~|3.0<br>~~ee~~<br>~~es~~<br>~~es~~|3.0<br>~~ee~~<br>~~es~~|ms<br>~~es~~|
|**Release Time (max.)**<br>Measured with no Coil Excitation<br>~~es~~<br>~~ee~~<br>~~es~~|1.5<br>~~es~~<br>~~es~~<br>~~ee~~<br>~~ee~~|1.5<br>~~es~~<br>~~ee~~<br>~~ee~~|ms<br>~~es~~<br>~~ee~~|
|**Insulation Resistance (typ.)**<br>Rh<45%,100V Test Voltage<br>~~es~~|1012<br>~~ee~~|1012<br>~~ee~~|Ohm|
|**Capacitance (typ.)**<br>@10kHz across open Switch<br>~~es ~~<br>~~ee~~|0.2<br> ~~ee~~<br>~~ee~~|0.2<br>~~ee~~<br>~~ee~~|pF<br>~~ee~~|



USA: +1.866.782.6339 │ salesusa@standexmeder.com Europe: +49.7731.8399.0 │ info@standexmeder.com Asia: +86.21.37820625 │ salesasia@standexmeder.com 

Version 01 

27.01.2015 

Modifications in the sense of technical progress are reserved. 

**A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components** 

|**Coil Data**|**Coil Data**|**Coil Voltage**<br>**(nom.)**|**Coil Resistance**<br>**(typ.)**|**Pull-In Voltage**<br>**(max.)**|**Drop-Out Voltage**<br>**(min.)**|**Nominal Coil Power**<br>**(typ.)**|
|---|---|---|---|---|---|---|
|**Contact**<br>**Form**|**Switch**<br>**Model**||||||
|**Unit**||VDC|Ohm|VDC|VDC|mW|
|**1A**|**69**|12|110|9|1|1,310|
|||24|465|18|2|1,240|
||**83**|12|260|9|1|554|
|||24|1050|18|2|554|
|**1B***|**69**|12|260|9|1|554|
|||24|1,050|18|2|548|
||**83**|12|410|9|1|351|
|||24|1,520|18|2|378|
|**2A**|**83**|12|140|9|1|1,000|
|The Pull-In / Drop-Out Voltage and Coil Resistance will change at rate of 0.4% per °C.<br>* Re-closure of Form B mayoccur if the max. coil voltage is exceeded. Coilpolarityon Form B must be observed. Pin 2 ispositive.|||||||



* Re-closure of Form B may occur if the max. coil voltage is exceeded. Coil polarity on Form B must be observed. Pin 2 is positive. 

|**Environmental Data**|**Environmental Data**|**Unit**|
|---|---|---|
|**Shock Resistance (max.)**<br>1/2 sine wave duration 11ms|50|g|
|**Vibration Resistance(max.)**|20|g|
|**Operating Temperature**|-20 to 70|°C|
|**Storage Temperature**|-35 to 105|°C|
|**Soldering Temperature (max.)**<br>5 sec. max.|260|°C|



## **HE Reed Relay** 

## **Handling & Assembly Instructions** 

- Switching inductive and/or capacitive loads create voltage and/or current peaks, which may damage the relay. Protective circuits need to be used. 

- External magnetic fields needs to be taken into consideration, including a too high packing density. This may influence the relays’ electrical characteristics. 

## **Life Test Data** 

*Load increase reduces life expectancy of Reed Switches 

- Mechanical shock impacts e.g. dropping the relays may cause immediate or post-installation failure. 

- Wave soldering: maximum 260 ° /5 seconds. 

- Reflow soldering:  Recommendations given by the soldering paste manufacturer need to be considered as well as the temperature limits of other components/processes. 

USA: +1.866.782.6339 Europe: +49.7731.8399.0 Asia: +86.21.37820625 

│ salesusa@standexmeder.com 

│ info@standexmeder.com 

│ salesasia@standexmeder.com 

Version 01 

27.01.2015 

Modifications in the sense of technical progress are reserved. 

**A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components** 

## **Glossary Contact Form** 

NO = Normally Open Contacts **Form A** SPST = Single Pole Single Throw NC = Normally Closed Contacts **Form B** SPST = Single Pole Single Throw Changeover **Form C** SPDT = Single Pole Double Throw 

## **Pin Outs** 

Dimensions available in  Product Datasheets. 

USA: +1.866.782.6339 Europe: +49.7731.8399.0 Asia: +86.21.37820625 

│ salesusa@standexmeder.com │ info@standexmeder.com │ salesasia@standexmeder.com 

Modifications in the sense of technical progress are reserved. 

Version 01 

27.01.2015