H24-1A69

© Standex Custom mE. Engineered Solutions for 

A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components 

ELECTRONICS 

## Series Datasheet — H Reed Relays 

## H Series Reed Relays 

## www.standexmeder.com 

**==> picture [218 x 116] intentionally omitted <==**

**----- Start of picture text -----**<br>
82 18<br><= 54 => —<br>cei: — }<br>oS 1 t 30<br>25 TL ¥<br>|<br>\ —Birole i<br>328 >|— 41 S<br>° 17.9<br>21><br>**----- End of picture text -----**<br>


- » Features: High Voltage Relay, Open Frame with M4 Screw Mount 

- » Applications: Test and Medical Equipment & Others 

- » Markets: Medical, Test and Measurement & Others 

## Part Description: H 00-1X00 

|Nominal Voltage|Contact QTY||Contact Form||Switch Model|Switch Model|||
|---|---|---|---|---|---|---|---|---|
|12, 24|1|||A,B||69, 83||||
|Contact Data<br>Rated Power (max.)<br>AnyDCcombination ofV&Anottoexceed|exceed their individual max.’s|eeee<br>ee<br>00<br>90||||Unit<br>w||||
|Switching Voltage (max.)<br>DCorpeakAC|||10,000|7,500||Vv|||
|Switching Current (max.)<br>DC or peak AC|||3.0|3.0||A|||
|CarryCurrent (max.)<br>DC or peak AC|||50<br>:|50<br>,||A|||
|Contact Resistance (max.)<br>@ 0.5V& SOmA|||150|150||mOhm|||
|According to EN60255-5|||||||||
|OperatingTime (max.)<br>Incl. Bounce; Measured withw/ Nominal Voltage|||30<br>:|30<br>,||ms|||
|ReleaseTime (max.)<br>Measured with no Coil Excitation|||15|15||ms|||
|Insulation Resistance (typ.)<br>Rh<45%, 100VTestVoltage|||10%|1019||Ohm||||
|Capacitance(typ.)<br>.<br>zZ across open Switch|||1|1||pF|||
|USA:<br>Standex<br>Europe:<br>/MEDER|<br>Asia:|+1.866.782.6339<br>+49,7731.8399.0<br>+86.21.37820625||salesusa@standexmeder.com<br>info@standexmeder.com<br>salesasia@standexmeder.com|||||.<br>eee<br>—_|



Europe:USA: +49,7731.8399.0+1.866.782.6339 salesusa@standexmeder.cominfo@standexmeder.com Asia: +86.21.37820625 salesasia@standexmeder.com Modifications in the sense of technical progress are reserved. 

4;= Standex /MEDER| 

## ¥; Standex —_— A Global Leader in the Design, Development, and ae. Engineered Manufacture of Sensor and Magnetic Components Solutions for Tomorrow 

ELECTRONICS 

## Series Datasheet — H Reed Relays 

## www.standexmeder.com 

|ail Data<br>Contact|<br>Form|ail Data h<br>| Swite<br>Model||CoilVoltage<br>(nom.)|Coil Resistance<br>(typ.)|Pull-In Voltage<br>(max.)||Drop-OutVoltage |NominalCoilPower<br>(min.)<br>(typ.)|Drop-OutVoltage |NominalCoilPower<br>(min.)<br>(typ.)|
|---|---|---|---|---|---|---|---|---|
||||12|230|8.4||1|620|
|1A|69,83|||24|700|18|t|2|822|
||||r||||||
|1B*|69, 83|||24|360|16.8|||2|1,600|



The Pull-In / Drop-Out Voltage and Coil Resistance will change at rate of 0.4% per °C. * Re-closure of Form B may occur if the max. coil voltage is exceeded. Coil polarity on Form B must be observed. Pin 2 is positive. 

**==> picture [477 x 102] intentionally omitted <==**

**----- Start of picture text -----**<br>
Environmental Data Unit H Reed Relay<br>Shock Resistance (max.) 50<br>1/2 sine wave duration 11ms 8<br>Vibration Resistance (max.) 20 g estan 424-1069 ,<br>Operating Temperature -20 to /0 °C ge r<br>Storage Temperature -35 to 95 °C ' e<br>Soldering Temperature (max.) 60 °C<br>5 5ec, Max.<br>**----- End of picture text -----**<br>


## Handling & Assembly Instructions 

- Switching inductive and/or capacitive loads create voltage and/or current peaks, which may damage the relay. Protective circuits need to be used. 

- External magnetic fields needs to be taken into consideration, including a too high packing density. This may influence the relays’ electrical characteristics. . . 

- > Mechanical shock impacts e.g. dropping the relays may cause immediate or post-installation failure. 

- > Wave soldering: maximum 2607/5 seconds. > Reflow soldering: Recommendations given by the soldering paste manufacturer need to be considered as well as the temperature limits of other components/processes. 

**==> picture [228 x 35] intentionally omitted <==**

**----- Start of picture text -----**<br>
life Test Data<br>*Load increase reduces life expectancy of Reed Switches<br>**----- End of picture text -----**<br>


**==> picture [13 x 10] intentionally omitted <==**

**----- Start of picture text -----**<br>
Load<br>**----- End of picture text -----**<br>


. 

**==> picture [26 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
Life time<br>**----- End of picture text -----**<br>


**==> picture [254 x 94] intentionally omitted <==**

**----- Start of picture text -----**<br>
Glossary Contact Form<br>Form NO = Normally Open Contacts Throw<br>A SP= S ingleT Pole Single ThrowContacts Throw io<br>Form B NC = Normally Closed Contacts A °<br>SPST = Single Pole Single Throw<br>Form C Changeover /e<br>SPDT = Single Pole Double Throw Throw<br>**----- End of picture text -----**<br>


**==> picture [408 x 208] intentionally omitted <==**

**----- Start of picture text -----**<br>
|<br>Single ThrowContacts Throw io<br>Contacts A °<br>Throw<br>/e REACH RoHS<br>Double Throw Throw mcrae<br>Europe:USA: +49,7731.8399.0+1.866.782.6339 salesusa@standexmeder.cominfo@standexmeder.com eee.<br>Asia: +86.21.37820625 salesasia@standexmeder.com —_<br>Modifications in the sense of technical progress are reserved.<br>**----- End of picture text -----**<br>


**==> picture [63 x 30] intentionally omitted <==**

**----- Start of picture text -----**<br>
all=Standex<br>IMEDER|<br>**----- End of picture text -----**<br>