H12D4825D

## **| DUAL SERIES** 

## PANEL MOUNT SOLID STATE RELAYS 

## Features 

- Independently controlled dual output solid-state relay 

- Ratings from 25A to 40A @ 24-530 VAC 

- Industry standard package 

- SCR output for heavy industrial loads 

- DC Control 

- Zero voltage (resistive loads) or instantaneous turn-on (inductive loads) output 

## **PRODUCT SELECTION** 

|**Control Voltage**|**25 A**|**40 A**|
|---|---|---|
|**4-15 VDC Control**|D2425D|D2440D|
|**15-32 VDC Control**|D2425DE|D2440DE|
|**4-15 VDC Control**|H12D4825D|H12D4840D|
|**15-32 VDC Control**|H12D4825DE|H12D4840D|



## **SPECIFICATIONS** 

## Output[(1)] 

|**Description**|**D2425xx**|**D2440xx**|**H12D4825xx**|**H12D4840xx**|
|---|---|---|---|---|
|**Operating Voltage (47-63 Hz) [Vrms]**|24-280|24-280|48-530|48-530|
|**Transient Overvoltage [Vpk]**|600|600|1200(2)|1200(2)|
|**Maximum Off-State Leakage Current @ Rated Voltage [mArms]**|10|10|10|10|
|**Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec](3)**|500|500|500|500|
|**Maximum Load Current [Arms](4)**|25|40|25|40|
|**Minimum Load Current [Arms]**|0.15|0.15|0.15|0.15|
|**Maximum 1 Cycle Surge Current (50/60 Hz) [Apk]**|239/250|597/6250|239/250|597/625|
|**Maximum On-State Voltage Drop @ Rated Current [Vpk]**|1.6|1.6|1.6|1.6|
|**Thermal Resistance Junction to Case (Rjc) [°C/W]**|1.02|0.63|1.02|0.63|
|**Maximum 1/2 Cycle I²t for Fusing (50/60 Hz) [A² sec]**|285/259|1779/1621|285/259|1779/1621|
|**Minimum Power Factor (with Maximum Load)**|0.5|0.5|0.5|0.5|



Copyright © 2024 Sensata Technologies, Inc. 

www.sensata.com 

## Input[(1)] 

|**Description**|**D24XXD**|**H12D48XXD**|**E SUFFIX**|
|---|---|---|---|
|**Control Voltage Range**|4-15 VDC|4-15 VDC|15-32 VDC|
|**Minimum Turn-On Voltage**|4.0 VDC|4.0 VDC|15.0 VDC|
|**Minimum Turn-Off Voltage**|1.0 VDC|1.0 VDC|1.0 VDC|
|**Typical Input Current @ 5 VDC (@ 24 VDC for E Suffix)**|13 mA|13 mA|15 mA|
|**Nominal Input Impedance [Ohm]**|300|240|1500|
|**Maximum Turn-On Time [msec](5)**|1/2 Cycle|1/2 Cycle|1/2 Cycle|
|**Maximum Turn-Off Time [msec]**|1/2 Cycle|1/2 Cycle|1/2 Cycle|



## General[(1)] 

|**Description**|**Parameters**|
|---|---|
|**Dielectric Strength, Input/Output (50/60 Hz)**|4000 Vrms|
|**Minimum Insulation Resistance (@ 500 VDC)**|109Ohms|
|**Maximum Capacitance, Input/Output**|10 pF|
|**Ambient Operating Temperature Range**|-40 to 80°C|
|**Ambient Storage Temperature Range**|-40 to 125 °C|
|**Weight (typical)**|3.0 oz (86.5g)|
|**Encapsulation**|Thermally Conductive Epoxy|
|**Terminals**|.25” Fastons, .025” Square Pins|



## **MECHANICAL SPECIFICATIONS** 

Tolerance: ±0.02 in / 0.5 mm All dimensions are in: inches [millimeters] 

Page 2 

Copyright © 2024 Sensata Technologies, Inc. 

www.sensata.com 

## **WIRING DIAGRAM** 

## **THERMAL DERATE INFORMATION** 

Page 3 

Copyright © 2024 Sensata Technologies, Inc. 

www.sensata.com 

T Example : H12D4825DH-10 e 

## **ORDERING OPTIONS** 

**H12D48 25 D H -10 Series** T ~~T |} ft~~ **Output Voltage D24 :** 24-280 VAC **H12D48 :** 48-530 VAC **Rated Load Current 25 :** 25 Amps **40 :** 40 Amps **Control Voltage D :** 4-15 VDC **DE :** 15-32 VDC **Thermal Pad Blank :** Not Included **H :** Included **Switching Mode Blank :** Zero Voltage Turn-On Required for valid part number **-10 :** Instantaneous Turn-On For options only and not required for valid part number E ~~E~~ 

## **GENERAL NOTES** 

(1) All parameters at 25°C unless otherwise specified. 

(2) For option (-10) models the Transient overvoltage is 1100Vac. 

(3) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 

(4) Heat sinking required, for derating curves see next page. 

(5) Turn-on time for Instantaneous turn-on (-10) versions is 0.1 msec 

## **AGENCY APPROVALS & CERTIFICATIONS** 

Designed in accordance with the requirements of IEC 62314 

Page 4 

Copyright © 2024 Sensata Technologies, Inc. 

www.sensata.com 

## **WARNINGS** 

## RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE 

- The product’s side panels may be hot, allow the product to cool before touching 

- Follow proper mounting instructions including torque values 

- Do not allow liquids or foreign objects to enter this product 

**Failure to follow these instructions can result in serious injury, or equipment damage.** 

## HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH 

- Disconnect all power before installing or working with this equipment 

- Verify all connections and replace all covers before turning on power 

**Failure to follow these instructions will result in death or serious injury.** 

Datasheets provided by Sensata Technologies, Inc., its subsidiaries and/or affiliates (“Sensata”) are solely intended to assist third parties (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, valuation, and judgment in designing Buyer’s systems and products. Sensata datasheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular datasheet. Sensata may make corrections, enhancements, improvements, and other changes to its datasheets or components without notice. Buyers are authorized to use Sensata datasheets with the Sensata component(s) identified in each particular datasheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATASHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATASHEETS OR USE OF THE DATASHEETS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATASHEETS OR USE THEREOF. 

All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com. SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY, AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA 

## **CONTACT US** 

## **Americas** 

+1(800) 350 2727 sales.crydom@sensata.com **Europe, Middle East & Africa** +44 (1202) 416170 ssr-info.eu@sensata.com **Asia Pacific** sales.isasia@list.sensata.com China +86 (21) 2306 1500 Japan +81 (45) 277 7117 Korea +82 (31) 601 2004 India +91 (80) 67920890 Rest of Asia +886 (2) 27602006 ext 2808 

Page 5 

www.sensata.com 

Rev:07/02/2024 ECN 21026 FDE-07-01 Rev. B 

Copyright © 2024 Sensata Technologies, Inc.