GYG1E681MCQADNGS

**CONDUCTIVE  POLYMER  HYBRID  ALUMINUM  ELECTROLYTIC  CAPACITORS GYG** Chip Type, 125°C High Reliability **NEW** ~~es [7] ae _~~ 4 **GYE** High Reliability, Low ESR, High ripple current. Smaller Long life of 4000 hours at 125°C, High Capacitance. Higher Capacitance Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). AEC-Q200 Qualified. Please contact us for details. **GYF** Higher Capacitance 3 _ **GYG** | 3° Specifications Item Performance Characteristics Category Temperature Range –55 to +125°C Rated Voltage Range 25 to 35V ~~——~__~~ Rated Capacitance Range 82 to 680µF Capacitance Tolerance ± 20%   at 120Hz, 20°C ~~[ops ss~~ Rated voltage (V) 25 35 120Hz 20°C Tangent of loss angle (tan δ) tan  δ (max.) 0.14 0.12 ~~EE Fee~~ ESR Less than or equal to the specified value at 100kHz, 20°C ~~[pT]~~ Leakage Current ※ After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV(µA). Temperature Characteristics Z( – 25°C) / Z(+20°C) 2 (Max.Impedance Ratio) Z( – 55°C) / Z(+20°C) 2.5 (100kHz) ~~a~~ The specifications listed at right shall be met when the ~~a~~ Capacitance change Within ± 30% of initial capacitance value Endurance capacitors are restored to 20°C after D.C. bias plus rated tan δ 200% or less of the initial specified value ripple current is applied for 4000 hours at 125°C, the peak ESR 200% or less of the initial specified value voltage shall not exceed the rated voltage. Leakage current Less than or equal to the initial specified value ~~|~~ Shelf Life After storing the capacitors under no load at 125°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. ~~es~~ Damp Heat The specifications listed at right shall be met when the Capacitance change Within±30% of the initial capacitance value capacitors are restored to 20°C after the rated voltage is tan δ 200% or less of the initial specified value (Steady State) applied for 2000 hours at 85°C, 85% RH. Leakage current Less than or equal to the initial specified value ~~>~~ Resistance to Soldering Heat The capacitors are kept on a hot plate for 30 seconds, which is maintained at 250°C. The capacitors shall meet the characteristic requirements listed at right when they are removed from the plate and restored to 20°C. Ctan Leakage currentapδacitance change Within±10Less than or eLess than or equal to the initial specified value% of the initial caqual to the initial spacitance valuepecified value Marking Black print on the case top. ~~ee~~ ※ I : Leakage Current(µA), C : Rated Capacitance(µF), V : Rated Voltage(V) Dimensions Positive Type numbering system  (Example : 35V 82µF) (φ6.3 )【Standard】 Plastic platform 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Voltage (V:35V) Series 0.3 max. C±0.2 G Y G 1 V 8 2 0 M C Q 1 G S Taping code Size code I] AL ~~TT =~~ Configuration Capacitance tolerance (±20%) Size Code Rated capacitance (82µF) Standard Q Rated voltage (35V) Vibration Resistance W Lot No. Capacitance L±0.3 H Negative Series name Type Positive (φ8, φ10 )【Standard】 Plastic platform Vibration Trade markVoltage (E:25V) Series 0.3 max. C±0.2 StandardφD×L 6.3 × 5.8 8 × 10 10 × 10(mm) ResistanceφD×L 8 × 10 10 × 10(mm) A 7.3 9.0 11.0 A 9.0 11.0 B 6.6 8.3 10.3 B 8.3 10.3 C 6.6 8.3 10.3 C 8.3 10.3 E 2.2 3.1 4.5 Voltage E 3.1 4.5 L 5.8 10.3 10.3 V 25 35 L 10.5 10.5 toe ~~2~~ H 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 Code E V H 1.1 to 1.5 1.1 to 1.5 Om Lot No. Capacitance L±0.5 ~~e~~ H Negative Es. (φ8, φ10 )【Vibration Resistance】 Positive Frequency coefficient of rated ripple current Voltage (E:25V) Series Plastic platform 0 Frequency0/ 120Hz 1kHz 10kHz 100kHz or more Coefficient 0.15 0.40 0.75 1.00 Trade mark 0.3 max. C±0.2 - ~~-~~ /| ~~——— a~~ n ~~s oo~~ Lot No. Capacitance L± 0.5 ~~m~~ H Negative 

Aid electrode 

Dimension table in next page. ~~ee~~ 

[ CAT.8100O 

**CONDUCTIVE  POLYMER  HYBRID  ALUMINUM  ELECTROLYTIC  CAPACITORS** 

## **GYG** 

## Dimensions 

|Rated Voltage<br>|Rated<br>|Case Size||Leakage Current<br>（µA）|ESR（mΩ）max.<br>（20℃/100kHz）<br>|Rated Ripple<br>（mArms）<br>（125℃/100kHz）|Part Number|
|---|---|---|---|---|---|---|---|
|（V）<br>（code）|Capacitance<br>（µF）|φD×L（mm）|tanδ<br>|（<br>at 20℃ after<br>2 minutes ）||||
|25<br>（1E）|120|6.3×5.8|0.14|30.0|50|1400|GYG1E121MCQ1GS|
||390|8×10|0.14|97.5|22|2900|GYG1E391MC□1GS|
||680|10×10|0.14|170.0|20|3300|GYG1E681MC□1GS|
|35<br>（1V）|82|6.3×5.8|0.12|28.7|55|1400|GYG1V820MCQ1GS|
||270|8×10|0.12|94.5|22|2900|GYG1V271MC□1GS|
||470|10×10|0.12|164.5|20|3300|GYG1V471MC□1GS|



**□** : Enter the appropriate configuration code. 

For taping specifications, recommended land size/soldering by reflow and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. 

CAT.8100O