GYF1E331MCQADNGS

## **CONDUCTIVE  POLYMER  HYBRID  ALUMINUM  ELECTROLYTIC  CAPACITORS** Chip Type, 125°C High Reliability **GYF** ~~rel [21~~ . 

**GYA** High Reliability, Low ESR, High ripple current. Long life of 4000 hours at 125°C, High Capacitance. CapacitanceHigher Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). AEC-Q200 Qualified. Please contact us for details. B **GYE** Smaller Higher Capacitance 

## Specifications 

## **GYF** 

Item Performance Characteristics Category Temperature Range –55 to +125°C ~~ee~~ Rated Voltage Range 16 to 63V Rated Capacitance Range 33 to 1800µF ~~a~~ Capacitance Tolerance ± 20%   at 120Hz, 20°C Rated voltage (V) 16 25 35 50 63 120Hz 20°C Tangent of loss angle (tan δ) tan  δ (max.) 0.16 0.14 0.12 0.10 0.08 ~~=~~ ESR Less than or equal to the specified value at 100kHz, 20°C ~~a~~ Leakage Current ※ After 2 minutes' application of rated volta ~~———~~ ge at 20°C, leakage current is not more than 0.01CV(µA). Temperature Characteristics Z( – 25°C) / Z(+20°C) 2 (Max.Impedance Ratio) Z( – 55°C) / Z(+20°C) 2.5 (100kHz) ~~ee~~ The specifications listed at right shall be met when the Capacitance change Within ± 30% of initial capacitance value Endurance capacitors are restored to 20°C after D.C. bias plus rated tan δ 200% or less of the initial specified value ripple current is applied for 4000 hours at 125°C, the peak ESR 200% or less of the initial specified value voltage shall not exceed the rated voltage. Leakage current Less than or equal to the initial specified value ~~SS~~ Shelf Life After storing the capacitors under no load at 125°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. ~~ee~~ Damp Heat The specifications listed at right shall be met when the Capacitance change Within±30% of the initial capacitance value capacitors are restored to 20°C after the rated voltage is tan δ 200% or less of the initial specified value (Steady State) applied for 2000 hours at 85°C, 85% RH. Leakage current Less than or equal to the initial specified value ~~a~~ Resistance to Soldering Heat The capacitors are kept on a hot plate for 30 seconds, which is maintained at 250°C. The capacitors shall meet the characteristic requirements listed at right when they are removed from the ~~i~~ plate and restored to 20°C. Ctan Leakage currenta ~~——~~ pδacitance change Within±10Less than or eLess than or equal to the initial specified value% of the initial caqual to the initial spacitance valuepecified value ~~———~~ Marking Black print on the case top. 

※ I : Leakage Current(µA), C : Rated Capacitance(µF), V : Rated Voltage(V) Dimensions Type numbering system  (Example : 35V 68µF) Positive (φ6.3 )【Standard】 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Voltage (V:35V) Series Plastic platform0.3 max. C±0.2 G Y F 1 V 6 8 0 M C Q 1 G S Taping code Size code Configuration Capacitance tolerance (±20%) Size Code Rated capacitance (68µF) Standard Q ® an At Ty —— Rated voltage (35V) Vibration Resistance ~~_~~ W Series name nh Lot No. Capacitance L±0.3 H Negative Type (φ8, φ10 )【Standard】 Plastic platform Positive StandardφD×L 6.3 × 5.8 6.3 × 7.7 8 × 10 10 × 10 10×12.5(mm) Vibration ResistanceφD×L 6.3 × 7.7 8 × 10 10 × 10 10 × 12.5(mm) Voltage (E:25V) Series 0.3 max. C±0.2 A 7.3 7.3 9.0 11.0 11.0 A 7.3 9.0 11.0 11.0 Trade mark B 6.6 6.6 8.3 10.3 10.3 B 6.6 8.3 10.3 10.3 C 6.6 6.6 8.3 10.3 10.3 C 6.6 8.3 10.3 10.3 E 2.2 2.2 3.1 4.5 4.5 Voltage E 2.2 3.1 4.5 4.5 L 5.8 7.7 10.3 10.3 12.5 V 16 25 35 50 63 L 7.7 10.5 10.5 12.8 d ~~e S~~ H 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 Code C e E V H J H 0.5 to 0.8 1.1 to 1.5 1.1 to 1.5 1.1 to 1.5 LM Lot No. Capacitance L±0.5 i H ~~)~~ Negative (φ8, φ10 )【Vibration Resistance】 Positive Positive Voltage (E:25V) Series Plastic platform (φ6.3 )【Vibration Resistance】 Trade mark 0.3 max. C±0.2 Voltage (V:35V) Series S Plastic platform ~~S~~ S ~~f~~ 0.3 max. C±0.2 Lot No. Capacitance L± 0.5 H Negative ~~O~~ Lot No. ~~°~~ Capacitance hTo L± 0.5 ~~om:~~ + Lon ~~HAN~~ H ~~l~~ t ~~ge G~~ Negative ~~OF~~ — ~~— &“He~~ — Aid electrode Frequency coefficient of rated ripple current 0 Frequency0/ 120Hz 1kHz 10kHz 100kHz or more Coefficient 0.15 0.40 0.75 1.00 ——o Dimension table in next page. [- ~~+ + —} J~~ [| CAT.8100O 

——o Dimension table in next page. 

**CONDUCTIVE  POLYMER  HYBRID  ALUMINUM  ELECTROLYTIC  CAPACITORS** 

## **GYF** 

Dimensions 

**==> picture [512 x 51] intentionally omitted <==**

**----- Start of picture text -----**<br>
Rated Voltage（V） CapacitanceRated Case Size tan δ Leakage Current（µA） ESR（mΩ）max.  Rated Ripple（mArms） Part Number<br>（code） （µF） φD×L（mm） （ at 20℃ after 2 minutes ） （20℃/100kHz） （125℃/100kHz）<br>**----- End of picture text -----**<br>


|Rated Voltage<br>（V）<br>（code）|Rated<br>Capacitance<br>（µF）|Case Size<br>φD×L（mm）|tanδ<br>|Leakage Current<br>（µA）<br>（<br>at 20℃ after<br>2 minutes ）|ESR（mΩ）max.<br>（20℃/100kHz）<br>|Rated Ripple<br>（mArms）<br>（125℃/100kHz）|Part Number|
|---|---|---|---|---|---|---|---|
|||||||||
|16<br>（1C）|180|6.3×5.8|0.16|28.8|50|1100|GYF1C181MCQ1GS|
||270|6.3×7.7|0.16|43.2|30|1800|GYF1C271MC□1GS|
||560|8×10|0.16|89.6|25|2000|GYF1C561MC□1GS|
||1000|10×10|0.16|160.0|20|2800|GYF1C102MC□1GS|
||1200|10×12.5|0.16|192.0|15|3500|GYF1C122MC□1GS|
||1800|10×16.5|0.16|288.0|12|4000|GYF1C182MN□1GS|
|25<br>（1E）|100|6.3×5.8|0.14|25.0|50|1300|GYF1E101MCQ1GS|
||180|6.3×7.7|0.14|45.0|30|1800|GYF1E181MC□1GS|
||330|8×10|0.14|82.5|27|2000|GYF1E331MC□1GS|
||560|10×10|0.14|140.0|20|2800|GYF1E561MC□1GS|
||680|10×12.5|0.14|170.0|16|3500|GYF1E681MC□1GS|
||1000|10×16.5|0.14|250.0|12|4000|GYF1E102MN□1GS|
|35<br>（1V）|68|6.3×5.8|0.12|23.8|60|1200|GYF1V680MCQ1GS|
||120|6.3×7.7|0.12|42.0|35|1700|GYF1V121MC□1GS|
||220|8×10|0.12|77.0|27|2000|GYF1V221MC□1GS|
||390|10×10|0.12|136.5|20|2800|GYF1V391MC□1GS|
||470|10×12.5|0.12|164.5|16|3500|GYF1V471MC□1GS|
||680|10×16.5|0.12|238.0|12|4000|GYF1V681MN□1GS|
|50<br>（1H）|47|6.3×7.7|0.10|23.5|40|1400|GYF1H470MC□1GS|
||100|8×10|0.10|50.0|30|1700|GYF1H101MC□1GS|
||180|10×10|0.10|90.0|28|2000|GYF1H181MC□1GS|
||220|10×12.5|0.10|110.0|18|3000|GYF1H221MC□1GS|
||270|10×16.5|0.10|135.0|14|3700|GYF1H271MN□1GS|
|63<br>（1J）|33|6.3×7.7|0.08|20.7|80|1100|GYF1J330MC□1GS|
||68|8×10|0.08|42.8|40|1700|GYF1J680MC□1GS|
||120|10×10|0.08|75.6|30|2000|GYF1J121MC□1GS|
||150|10×12.5|0.08|94.5|20|3000|GYF1J151MC□1GS|
||180|10×16.5|0.08|113.4|15|3500|GYF1J181MN□1GS|



**□** : Enter the appropriate configuration code. 

Blue : New product （as of October 2025） 

For taping specifications, recommended land size/soldering by reflow and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. 

CAT.8100O