GYE1C181MCQADNGS

**CONDUCTIVE  POLYMER  HYBRID  ALUMINUM  ELECTROLYTIC  CAPACITORS** 

**GYE** Chip Type, 125°C High Reliability 

High Reliability, Low ESR, High ripple current. Long life of 4000 hours at 125°C, High Capacitance. **GYA** Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). AEC-Q200 Qualified. Please contact us for details. Higher Capacitance **GYE** = 

## Specifications 

Specifications Item Performance Characteristics Category Temperature Range –55 to +125°C ~~——————————————~~ Rated Voltage Range 16 to 63V Rated Capacitance Range 56 to 680µF ~~oe~~ Capacitance Tolerance ± 20%   at 120Hz, 20°C Rated voltage (V) 16 25 35 50 63 120Hz 20°C Tangent of loss angle (tan δ) tan  δ (max.) 0.16 0.14 0.12 0.10 0.08 ESR Less than or equal to the specified value at 100kHz, 20°C ~~————————~~ Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV ~~eee~~ (µA). Temperature Characteristics Z(– 25°C) / Z(+20°C) 2 (Max.Impedance Ratio) Z(– 55°C) / Z(+20°C) 2.5 (100kHz) 

The specifications listed at right shall be met when the Capacitance change Within ± 30% of initial capacitance value Endurance capacitors are restored to 20°C after D.C. bias plus rated tan δ 200% or less of the initial specified value ripple current is applied for 4000 hours at 125°C, the peak ESR 200% or less of the initial specified value voltage shall not exceed the rated voltage. Leakage current Less than or equal to the initial specified value ~~EE~~ Shelf Life After storing the capacitors under no load at 125°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 ~~a~~ clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Damp Heat The specifications listed at right shall be met when the Capacitance change Within±30% of the initial capacitance value capacitors are restored to 20°C after the rated voltage is tan δ 200% or less of the initial specified value (Steady State) applied for 2000 hours at 85°C, 85% RH. Leakage current Less than or equal to the initial specified value ~~|~~ Resistance to Soldering Heat The capacitors are kept on a hot plate for 30 seconds, which is maintained at 250°C. The capacitors shall meet the characteristic requirements listed at right when they are removed from the plate and restored to 20°C. Ctan Leakage currentapδacitance change Within±10Less than or eLess than or equal to the initial specified value% of the initial caqual to the initial spacitance valuepecified value ~~|~~ Marking Black print on the case top. ※ I : Leakage Current(µA), C : Rated Capacitance(µF), V : Rated Voltage(V) Dimensions (φ6.3 )【Standard】 Positive Type numbering system  (Example : 35V 56µF) Plastic platform Voltage (V:35V) Series 0.3 max. C±0.2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 G Y E 1 V 5 6 0 M C Q 1 G S _\ort A | ~~Oo~~ oO Taping code Size code Configuration Capacitance tolerance (±20%) Size Code Rated capacitance (56µF) Standard Q Lot No. Capacitance L±0.3 H Negative Rated voltage (35V) Vibration Resistance W Series name ‘QAoe IE ~~!~~ Positive || ~~p~~ L ~~i~~ ESt Type ~~tS~~ (φ8, φ10 )【Standard】 Plastic platform Standard (mm) Vibration Resistance (mm) Voltage (E:25V) Series 0.3 max. C±0.2 φD×L 6.3 × 5.8 6.3 × 7.7 8 × 10 10 × 10 10 × 12.5 φD×L 6.3 × 7.7 8 × 10 10 × 10 10 × 12.5 Trade mark A 7.3 7.3 9.0 11.0 11.0 A 7.3 9.0 11.0 11.0 B 6.6 6.6 8.3 10.3 10.3 B 6.6 8.3 10.3 10.3 C 6.6 6.6 8.3 10.3 10.3 C 6.6 8.3 10.3 10.3 E 2.2 2.2 3.1 4.5 4.5 Voltage E 2.2 3.1 4.5 4.5 L 5.8 7.7 10.3 10.3 12.5 V 16 25 35 50 63 L 7.7 10.5 10.5 12.8 tne ~~==~~ H 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 Code C E V H J H 0.5 to 0.8 1.1 to 1.5 1.1 to 1.5 1.1 to 1.5 O Lot No. Capacitance L±0.5 (L2H H Negative he Positive (φ8, φ10 )【Vibration Resistance】 (φ6.3 )【Vibration Resistance】 |_] a Positive 6 Voltage (E:25V) Series Plastic platform ® Plastic platform Trade mark 0.3 max. C±0.2 Voltage (V:35V) Series ~~=f,~~ 0.3 max. C±0.2 ~~6~~ H ~~O~~ Lot No. Capacitance 10.5±0.5 ~~m~~ H Negative ~~C~~ Lot No. Capacitance hy ~~e~~ L ~~o~~ ± 0.5 ~~HN~~ Negative ; ~~—~~ = ~~|~~ — st ~~ar—~~~ Aid electrode ~~t~~ s} Frequency coefficient of rated ripple current 0 Frequency0/ 120Hz 1kHz 10kHz 100kHz or more Coefficient 0.15 0.40 0.75 1.00 ~~—~~ Dimension table in next page. ~~———_—<_—_<~~ [ CAT.8100N 

**CONDUCTIVE  POLYMER  HYBRID  ALUMINUM  ELECTROLYTIC  CAPACITORS** 

## **GYE** 

## Dimensions 

**==> picture [511 x 51] intentionally omitted <==**

**----- Start of picture text -----**<br>
Rated Voltage（V） CapacitanceRated Case Size tan δ Leakage Current（µA） ESR（mΩ）max.  Rated Ripple（mArms） Part Number<br>（code） （µF） φD×L（mm） （ at 20℃ after 2 minutes ） （20℃/100kHz） （125℃/100kHz）<br>**----- End of picture text -----**<br>


|Rated Voltage<br>（V）<br>（code）|Rated<br>Capacitance<br>（µF）|Case Size<br>φD×L（mm）|tanδ<br>|Leakage Current<br>（µA）<br>（<br>at 20℃ after<br>2 minutes ）|ESR（mΩ）max.<br>（20℃/100kHz）<br>|Rated Ripple<br>（mArms）<br>（125℃/100kHz）|Part Number|
|---|---|---|---|---|---|---|---|
|||||||||
|16<br>（1C）|120|6.3×5.8|0.16|19.20|50|1100|GYE1C121MCQ1GS|
||180|6.3×7.7|0.16|28.80|30|1800|GYE1C181MC□1GS|
||390|8×10|0.16|62.40|25|2000|GYE1C391MC□1GS|
||680|10×10|0.16|108.80|20|2800|GYE1C681MC□1GS|
|25<br>（1E）|68|6.3×5.8|0.14|17.0|50|1100|GYE1E680MCQ1GS|
||82|6.3×5.8|0.14|20.5|50|1100|GYE1E820MCQ1GS|
||150|6.3×7.7|0.14|37.5|30|1700|GYE1E151MC□1GS|
||270|8×10|0.14|67.5|27|2000|GYE1E271MC□1GS|
||470|10×10|0.14|117.5|20|2800|GYE1E471MC□1GS|
||560|10×12.5|0.14|140.00|16|3500|GYE1E561MC□1GS|
|35<br>（1V）|56|6.3×5.8|0.12|19.6|60|1100|GYE1V560MCQ1GS|
||100|6.3×7.7|0.12|35.0|35|1700|GYE1V101MC□1GS|
||180|8×10|0.12|63.0|27|2000|GYE1V181MC□1GS|
||330|10×10|0.12|115.5|20|2800|GYE1V331MC□1GS|
||390|10×12.5|0.12|136.50|16|3500|GYE1V391MC□1GS|
|50<br>（1H）|82|8×10|0.10|41.00|30|1700|GYE1H820MC□1GS|
||150|10×10|0.10|75.00|28|2000|GYE1H151MC□1GS|
||180|10×12.5|0.10|90.00|18|3000|GYE1H181MC□1GS|
|63<br>（1J）|56|8×10|0.08|35.28|40|1700|GYE1J560MC□1GS|
||100|10×10|0.08|63.00|30|2000|GYE1J101MC□1GS|
||120|10×12.5|0.08|75.60|20|3000|GYE1J121MC□1GS|



**□** : Enter the appropriate configuration code. 

For taping specifications, recommended land size/soldering by reflow and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. 

CAT.8100N